214 lines
6.4 KiB
C
214 lines
6.4 KiB
C
/*
|
|
* drivers/net/gianfar_phy.h
|
|
*
|
|
* Gianfar Ethernet Driver -- PHY handling
|
|
* Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
|
|
* Based on 8260_io/fcc_enet.c
|
|
*
|
|
* Author: Andy Fleming
|
|
* Maintainer: Kumar Gala (kumar.gala@freescale.com)
|
|
*
|
|
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#ifndef __GIANFAR_PHY_H
|
|
#define __GIANFAR_PHY_H
|
|
|
|
#define MII_end ((u32)-2)
|
|
#define MII_read ((u32)-1)
|
|
|
|
#define MIIMIND_BUSY 0x00000001
|
|
#define MIIMIND_NOTVALID 0x00000004
|
|
|
|
#define GFAR_AN_TIMEOUT 2000
|
|
|
|
/* 1000BT control (Marvell & BCM54xx at least) */
|
|
#define MII_1000BASETCONTROL 0x09
|
|
#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
|
|
#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
|
|
|
|
/* Cicada Extended Control Register 1 */
|
|
#define MII_CIS8201_EXT_CON1 0x17
|
|
#define MII_CIS8201_EXTCON1_INIT 0x0000
|
|
|
|
/* Cicada Interrupt Mask Register */
|
|
#define MII_CIS8201_IMASK 0x19
|
|
#define MII_CIS8201_IMASK_IEN 0x8000
|
|
#define MII_CIS8201_IMASK_SPEED 0x4000
|
|
#define MII_CIS8201_IMASK_LINK 0x2000
|
|
#define MII_CIS8201_IMASK_DUPLEX 0x1000
|
|
#define MII_CIS8201_IMASK_MASK 0xf000
|
|
|
|
/* Cicada Interrupt Status Register */
|
|
#define MII_CIS8201_ISTAT 0x1a
|
|
#define MII_CIS8201_ISTAT_STATUS 0x8000
|
|
#define MII_CIS8201_ISTAT_SPEED 0x4000
|
|
#define MII_CIS8201_ISTAT_LINK 0x2000
|
|
#define MII_CIS8201_ISTAT_DUPLEX 0x1000
|
|
|
|
/* Cicada Auxiliary Control/Status Register */
|
|
#define MII_CIS8201_AUX_CONSTAT 0x1c
|
|
#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
|
|
#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
|
|
#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
|
|
#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
|
|
#define MII_CIS8201_AUXCONSTAT_100 0x0008
|
|
|
|
/* 88E1011 PHY Status Register */
|
|
#define MII_M1011_PHY_SPEC_STATUS 0x11
|
|
#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
|
|
#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
|
|
#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
|
|
#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
|
|
#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
|
|
#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
|
|
|
|
#define MII_M1011_IEVENT 0x13
|
|
#define MII_M1011_IEVENT_CLEAR 0x0000
|
|
|
|
#define MII_M1011_IMASK 0x12
|
|
#define MII_M1011_IMASK_INIT 0x6400
|
|
#define MII_M1011_IMASK_CLEAR 0x0000
|
|
|
|
#define MII_DM9161_SCR 0x10
|
|
#define MII_DM9161_SCR_INIT 0x0610
|
|
|
|
/* DM9161 Specified Configuration and Status Register */
|
|
#define MII_DM9161_SCSR 0x11
|
|
#define MII_DM9161_SCSR_100F 0x8000
|
|
#define MII_DM9161_SCSR_100H 0x4000
|
|
#define MII_DM9161_SCSR_10F 0x2000
|
|
#define MII_DM9161_SCSR_10H 0x1000
|
|
|
|
/* DM9161 Interrupt Register */
|
|
#define MII_DM9161_INTR 0x15
|
|
#define MII_DM9161_INTR_PEND 0x8000
|
|
#define MII_DM9161_INTR_DPLX_MASK 0x0800
|
|
#define MII_DM9161_INTR_SPD_MASK 0x0400
|
|
#define MII_DM9161_INTR_LINK_MASK 0x0200
|
|
#define MII_DM9161_INTR_MASK 0x0100
|
|
#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
|
|
#define MII_DM9161_INTR_SPD_CHANGE 0x0008
|
|
#define MII_DM9161_INTR_LINK_CHANGE 0x0004
|
|
#define MII_DM9161_INTR_INIT 0x0000
|
|
#define MII_DM9161_INTR_STOP \
|
|
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
|
|
| MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
|
|
|
|
/* DM9161 10BT Configuration/Status */
|
|
#define MII_DM9161_10BTCSR 0x12
|
|
#define MII_DM9161_10BTCSR_INIT 0x7800
|
|
|
|
#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
|
|
SUPPORTED_10baseT_Full | \
|
|
SUPPORTED_100baseT_Half | \
|
|
SUPPORTED_100baseT_Full | \
|
|
SUPPORTED_Autoneg | \
|
|
SUPPORTED_TP | \
|
|
SUPPORTED_MII)
|
|
|
|
#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
|
|
SUPPORTED_1000baseT_Half | \
|
|
SUPPORTED_1000baseT_Full)
|
|
|
|
#define MII_READ_COMMAND 0x00000001
|
|
|
|
#define MII_INTERRUPT_DISABLED 0x0
|
|
#define MII_INTERRUPT_ENABLED 0x1
|
|
/* Taken from mii_if_info and sungem_phy.h */
|
|
struct gfar_mii_info {
|
|
/* Information about the PHY type */
|
|
/* And management functions */
|
|
struct phy_info *phyinfo;
|
|
|
|
/* forced speed & duplex (no autoneg)
|
|
* partner speed & duplex & pause (autoneg)
|
|
*/
|
|
int speed;
|
|
int duplex;
|
|
int pause;
|
|
|
|
/* The most recently read link state */
|
|
int link;
|
|
|
|
/* Enabled Interrupts */
|
|
u32 interrupts;
|
|
|
|
u32 advertising;
|
|
int autoneg;
|
|
int mii_id;
|
|
|
|
/* private data pointer */
|
|
/* For use by PHYs to maintain extra state */
|
|
void *priv;
|
|
|
|
/* Provided by host chip */
|
|
struct net_device *dev;
|
|
|
|
/* A lock to ensure that only one thing can read/write
|
|
* the MDIO bus at a time */
|
|
spinlock_t mdio_lock;
|
|
|
|
/* Provided by ethernet driver */
|
|
int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
|
|
void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
|
|
};
|
|
|
|
/* struct phy_info: a structure which defines attributes for a PHY
|
|
*
|
|
* id will contain a number which represents the PHY. During
|
|
* startup, the driver will poll the PHY to find out what its
|
|
* UID--as defined by registers 2 and 3--is. The 32-bit result
|
|
* gotten from the PHY will be ANDed with phy_id_mask to
|
|
* discard any bits which may change based on revision numbers
|
|
* unimportant to functionality
|
|
*
|
|
* There are 6 commands which take a gfar_mii_info structure.
|
|
* Each PHY must declare config_aneg, and read_status.
|
|
*/
|
|
struct phy_info {
|
|
u32 phy_id;
|
|
char *name;
|
|
unsigned int phy_id_mask;
|
|
u32 features;
|
|
|
|
/* Called to initialize the PHY */
|
|
int (*init)(struct gfar_mii_info *mii_info);
|
|
|
|
/* Called to suspend the PHY for power */
|
|
int (*suspend)(struct gfar_mii_info *mii_info);
|
|
|
|
/* Reconfigures autonegotiation (or disables it) */
|
|
int (*config_aneg)(struct gfar_mii_info *mii_info);
|
|
|
|
/* Determines the negotiated speed and duplex */
|
|
int (*read_status)(struct gfar_mii_info *mii_info);
|
|
|
|
/* Clears any pending interrupts */
|
|
int (*ack_interrupt)(struct gfar_mii_info *mii_info);
|
|
|
|
/* Enables or disables interrupts */
|
|
int (*config_intr)(struct gfar_mii_info *mii_info);
|
|
|
|
/* Clears up any memory if needed */
|
|
void (*close)(struct gfar_mii_info *mii_info);
|
|
};
|
|
|
|
struct phy_info *get_phy_info(struct gfar_mii_info *mii_info);
|
|
int read_phy_reg(struct net_device *dev, int mii_id, int regnum);
|
|
void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value);
|
|
void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info);
|
|
void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts);
|
|
|
|
struct dm9161_private {
|
|
struct timer_list timer;
|
|
int resetdone;
|
|
};
|
|
|
|
#endif /* GIANFAR_PHY_H */
|