369 lines
9.3 KiB
C
369 lines
9.3 KiB
C
/*
|
|
* Chip-specific setup code for the AT91SAM9x5 family
|
|
*
|
|
* Copyright (C) 2010-2012 Atmel Corporation.
|
|
*
|
|
* Licensed under GPLv2 or later.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/at91sam9x5.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/cpu.h>
|
|
#include <mach/board.h>
|
|
|
|
#include "soc.h"
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
#include "sam9_smc.h"
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Clocks
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The peripheral clocks.
|
|
*/
|
|
static struct clk pioAB_clk = {
|
|
.name = "pioAB_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_PIOAB,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioCD_clk = {
|
|
.name = "pioCD_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_PIOCD,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk smd_clk = {
|
|
.name = "smd_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_SMD,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart0_clk = {
|
|
.name = "usart0_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_USART0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart1_clk = {
|
|
.name = "usart1_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_USART1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart2_clk = {
|
|
.name = "usart2_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_USART2,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
/* USART3 clock - Only for sam9g25/sam9x25 */
|
|
static struct clk usart3_clk = {
|
|
.name = "usart3_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_USART3,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi0_clk = {
|
|
.name = "twi0_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_TWI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi1_clk = {
|
|
.name = "twi1_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_TWI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi2_clk = {
|
|
.name = "twi2_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_TWI2,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk mmc0_clk = {
|
|
.name = "mci0_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_MCI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk spi0_clk = {
|
|
.name = "spi0_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_SPI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk spi1_clk = {
|
|
.name = "spi1_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_SPI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk uart0_clk = {
|
|
.name = "uart0_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_UART0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk uart1_clk = {
|
|
.name = "uart1_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_UART1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk tcb0_clk = {
|
|
.name = "tcb0_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_TCB,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pwm_clk = {
|
|
.name = "pwm_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_PWM,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk adc_clk = {
|
|
.name = "adc_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_ADC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk dma0_clk = {
|
|
.name = "dma0_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_DMA0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk dma1_clk = {
|
|
.name = "dma1_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_DMA1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk uhphs_clk = {
|
|
.name = "uhphs_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_UHPHS,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk udphs_clk = {
|
|
.name = "udphs_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_UDPHS,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */
|
|
static struct clk macb0_clk = {
|
|
.name = "pclk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_EMAC0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */
|
|
static struct clk lcdc_clk = {
|
|
.name = "lcdc_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_LCDC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
/* isi clock - Only for sam9g25 */
|
|
static struct clk isi_clk = {
|
|
.name = "isi_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_ISI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk mmc1_clk = {
|
|
.name = "mci1_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_MCI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
/* emac1 clock - Only for sam9x25 */
|
|
static struct clk macb1_clk = {
|
|
.name = "pclk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_EMAC1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ssc_clk = {
|
|
.name = "ssc_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_SSC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
/* can0 clock - Only for sam9x35 */
|
|
static struct clk can0_clk = {
|
|
.name = "can0_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_CAN0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
/* can1 clock - Only for sam9x35 */
|
|
static struct clk can1_clk = {
|
|
.name = "can1_clk",
|
|
.pmc_mask = 1 << AT91SAM9X5_ID_CAN1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
|
|
static struct clk *periph_clocks[] __initdata = {
|
|
&pioAB_clk,
|
|
&pioCD_clk,
|
|
&smd_clk,
|
|
&usart0_clk,
|
|
&usart1_clk,
|
|
&usart2_clk,
|
|
&twi0_clk,
|
|
&twi1_clk,
|
|
&twi2_clk,
|
|
&mmc0_clk,
|
|
&spi0_clk,
|
|
&spi1_clk,
|
|
&uart0_clk,
|
|
&uart1_clk,
|
|
&tcb0_clk,
|
|
&pwm_clk,
|
|
&adc_clk,
|
|
&dma0_clk,
|
|
&dma1_clk,
|
|
&uhphs_clk,
|
|
&udphs_clk,
|
|
&mmc1_clk,
|
|
&ssc_clk,
|
|
// irq0
|
|
};
|
|
|
|
static struct clk_lookup periph_clocks_lookups[] = {
|
|
/* lookup table for DT entries */
|
|
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
|
|
CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
|
|
CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
|
|
CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
|
|
CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
|
|
CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
|
|
CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
|
|
CLKDEV_CON_ID("pioA", &pioAB_clk),
|
|
CLKDEV_CON_ID("pioB", &pioAB_clk),
|
|
CLKDEV_CON_ID("pioC", &pioCD_clk),
|
|
CLKDEV_CON_ID("pioD", &pioCD_clk),
|
|
/* additional fake clock for macb_hclk */
|
|
CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
|
|
CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
|
|
};
|
|
|
|
/*
|
|
* The two programmable clocks.
|
|
* You must configure pin multiplexing to bring these signals out.
|
|
*/
|
|
static struct clk pck0 = {
|
|
.name = "pck0",
|
|
.pmc_mask = AT91_PMC_PCK0,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 0,
|
|
};
|
|
static struct clk pck1 = {
|
|
.name = "pck1",
|
|
.pmc_mask = AT91_PMC_PCK1,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 1,
|
|
};
|
|
|
|
static void __init at91sam9x5_register_clocks(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
|
|
clk_register(periph_clocks[i]);
|
|
|
|
clkdev_add_table(periph_clocks_lookups,
|
|
ARRAY_SIZE(periph_clocks_lookups));
|
|
|
|
if (cpu_is_at91sam9g25()
|
|
|| cpu_is_at91sam9x25())
|
|
clk_register(&usart3_clk);
|
|
|
|
if (cpu_is_at91sam9g25()
|
|
|| cpu_is_at91sam9x25()
|
|
|| cpu_is_at91sam9g35()
|
|
|| cpu_is_at91sam9x35())
|
|
clk_register(&macb0_clk);
|
|
|
|
if (cpu_is_at91sam9g15()
|
|
|| cpu_is_at91sam9g35()
|
|
|| cpu_is_at91sam9x35())
|
|
clk_register(&lcdc_clk);
|
|
|
|
if (cpu_is_at91sam9g25())
|
|
clk_register(&isi_clk);
|
|
|
|
if (cpu_is_at91sam9x25())
|
|
clk_register(&macb1_clk);
|
|
|
|
if (cpu_is_at91sam9x25()
|
|
|| cpu_is_at91sam9x35()) {
|
|
clk_register(&can0_clk);
|
|
clk_register(&can1_clk);
|
|
}
|
|
|
|
clk_register(&pck0);
|
|
clk_register(&pck1);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9x5 processor initialization
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static void __init at91sam9x5_map_io(void)
|
|
{
|
|
at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
|
|
}
|
|
|
|
static void __init at91sam9x5_ioremap_registers(void)
|
|
{
|
|
at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
|
|
}
|
|
|
|
void __init at91sam9x5_initialize(void)
|
|
{
|
|
arm_pm_restart = at91sam9g45_restart;
|
|
at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
|
|
|
|
/* Register GPIO subsystem (using DT) */
|
|
at91_gpio_init(NULL, 0);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9x5 devices (temporary before modification of code)
|
|
* -------------------------------------------------------------------- */
|
|
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Interrupt initialization
|
|
* -------------------------------------------------------------------- */
|
|
/*
|
|
* The default interrupt priority levels (0 = lowest, 7 = highest).
|
|
*/
|
|
static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller (FIQ) */
|
|
7, /* System Peripherals */
|
|
1, /* Parallel IO Controller A and B */
|
|
1, /* Parallel IO Controller C and D */
|
|
4, /* Soft Modem */
|
|
5, /* USART 0 */
|
|
5, /* USART 1 */
|
|
5, /* USART 2 */
|
|
5, /* USART 3 */
|
|
6, /* Two-Wire Interface 0 */
|
|
6, /* Two-Wire Interface 1 */
|
|
6, /* Two-Wire Interface 2 */
|
|
0, /* Multimedia Card Interface 0 */
|
|
5, /* Serial Peripheral Interface 0 */
|
|
5, /* Serial Peripheral Interface 1 */
|
|
5, /* UART 0 */
|
|
5, /* UART 1 */
|
|
0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
|
|
0, /* Pulse Width Modulation Controller */
|
|
0, /* ADC Controller */
|
|
0, /* DMA Controller 0 */
|
|
0, /* DMA Controller 1 */
|
|
2, /* USB Host High Speed port */
|
|
2, /* USB Device High speed port */
|
|
3, /* Ethernet MAC 0 */
|
|
3, /* LDC Controller or Image Sensor Interface */
|
|
0, /* Multimedia Card Interface 1 */
|
|
3, /* Ethernet MAC 1 */
|
|
4, /* Synchronous Serial Interface */
|
|
4, /* CAN Controller 0 */
|
|
4, /* CAN Controller 1 */
|
|
0, /* Advanced Interrupt Controller (IRQ0) */
|
|
};
|
|
|
|
struct at91_init_soc __initdata at91sam9x5_soc = {
|
|
.map_io = at91sam9x5_map_io,
|
|
.default_irq_priority = at91sam9x5_default_irq_priority,
|
|
.ioremap_registers = at91sam9x5_ioremap_registers,
|
|
.register_clocks = at91sam9x5_register_clocks,
|
|
.init = at91sam9x5_initialize,
|
|
};
|