linux_old1/drivers/thunderbolt/nhi_ops.c

180 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* NHI specific operations
*
* Copyright (C) 2019, Intel Corporation
* Author: Mika Westerberg <mika.westerberg@linux.intel.com>
*/
#include <linux/delay.h>
#include <linux/suspend.h>
#include "nhi.h"
#include "nhi_regs.h"
#include "tb.h"
/* Ice Lake specific NHI operations */
#define ICL_LC_MAILBOX_TIMEOUT 500 /* ms */
static int check_for_device(struct device *dev, void *data)
{
return tb_is_switch(dev);
}
static bool icl_nhi_is_device_connected(struct tb_nhi *nhi)
{
struct tb *tb = pci_get_drvdata(nhi->pdev);
int ret;
ret = device_for_each_child(&tb->root_switch->dev, NULL,
check_for_device);
return ret > 0;
}
static int icl_nhi_force_power(struct tb_nhi *nhi, bool power)
{
u32 vs_cap;
/*
* The Thunderbolt host controller is present always in Ice Lake
* but the firmware may not be loaded and running (depending
* whether there is device connected and so on). Each time the
* controller is used we need to "Force Power" it first and wait
* for the firmware to indicate it is up and running. This "Force
* Power" is really not about actually powering on/off the
* controller so it is accessible even if "Force Power" is off.
*
* The actual power management happens inside shared ACPI power
* resources using standard ACPI methods.
*/
pci_read_config_dword(nhi->pdev, VS_CAP_22, &vs_cap);
if (power) {
vs_cap &= ~VS_CAP_22_DMA_DELAY_MASK;
vs_cap |= 0x22 << VS_CAP_22_DMA_DELAY_SHIFT;
vs_cap |= VS_CAP_22_FORCE_POWER;
} else {
vs_cap &= ~VS_CAP_22_FORCE_POWER;
}
pci_write_config_dword(nhi->pdev, VS_CAP_22, vs_cap);
if (power) {
unsigned int retries = 10;
u32 val;
/* Wait until the firmware tells it is up and running */
do {
pci_read_config_dword(nhi->pdev, VS_CAP_9, &val);
if (val & VS_CAP_9_FW_READY)
return 0;
msleep(250);
} while (--retries);
return -ETIMEDOUT;
}
return 0;
}
static void icl_nhi_lc_mailbox_cmd(struct tb_nhi *nhi, enum icl_lc_mailbox_cmd cmd)
{
u32 data;
pci_read_config_dword(nhi->pdev, VS_CAP_19, &data);
data = (cmd << VS_CAP_19_CMD_SHIFT) & VS_CAP_19_CMD_MASK;
pci_write_config_dword(nhi->pdev, VS_CAP_19, data | VS_CAP_19_VALID);
}
static int icl_nhi_lc_mailbox_cmd_complete(struct tb_nhi *nhi, int timeout)
{
unsigned long end;
u32 data;
if (!timeout)
goto clear;
end = jiffies + msecs_to_jiffies(timeout);
do {
pci_read_config_dword(nhi->pdev, VS_CAP_18, &data);
if (data & VS_CAP_18_DONE)
goto clear;
msleep(100);
} while (time_before(jiffies, end));
return -ETIMEDOUT;
clear:
/* Clear the valid bit */
pci_write_config_dword(nhi->pdev, VS_CAP_19, 0);
return 0;
}
static void icl_nhi_set_ltr(struct tb_nhi *nhi)
{
u32 max_ltr, ltr;
pci_read_config_dword(nhi->pdev, VS_CAP_16, &max_ltr);
max_ltr &= 0xffff;
/* Program the same value for both snoop and no-snoop */
ltr = max_ltr << 16 | max_ltr;
pci_write_config_dword(nhi->pdev, VS_CAP_15, ltr);
}
static int icl_nhi_suspend(struct tb_nhi *nhi)
{
int ret;
if (icl_nhi_is_device_connected(nhi))
return 0;
/*
* If there is no device connected we need to perform both: a
* handshake through LC mailbox and force power down before
* entering D3.
*/
icl_nhi_lc_mailbox_cmd(nhi, ICL_LC_PREPARE_FOR_RESET);
ret = icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
if (ret)
return ret;
return icl_nhi_force_power(nhi, false);
}
static int icl_nhi_suspend_noirq(struct tb_nhi *nhi, bool wakeup)
{
enum icl_lc_mailbox_cmd cmd;
if (!pm_suspend_via_firmware())
return icl_nhi_suspend(nhi);
cmd = wakeup ? ICL_LC_GO2SX : ICL_LC_GO2SX_NO_WAKE;
icl_nhi_lc_mailbox_cmd(nhi, cmd);
return icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
}
static int icl_nhi_resume(struct tb_nhi *nhi)
{
int ret;
ret = icl_nhi_force_power(nhi, true);
if (ret)
return ret;
icl_nhi_set_ltr(nhi);
return 0;
}
static void icl_nhi_shutdown(struct tb_nhi *nhi)
{
icl_nhi_force_power(nhi, false);
}
const struct tb_nhi_ops icl_nhi_ops = {
.init = icl_nhi_resume,
.suspend_noirq = icl_nhi_suspend_noirq,
.resume_noirq = icl_nhi_resume,
.runtime_suspend = icl_nhi_suspend,
.runtime_resume = icl_nhi_resume,
.shutdown = icl_nhi_shutdown,
};