497 lines
11 KiB
C
497 lines
11 KiB
C
/*
|
|
* (C) Copyright 2003-2004
|
|
* Humboldt Solutions Ltd, adrian@humboldt.co.uk.
|
|
|
|
* This is a combined i2c adapter and algorithm driver for the
|
|
* MPC107/Tsi107 PowerPC northbridge and processors that include
|
|
* the same I2C unit (8240, 8245, 85xx).
|
|
*
|
|
* Release 0.8
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/io.h>
|
|
#ifdef CONFIG_FSL_OCP
|
|
#include <asm/ocp.h>
|
|
#define FSL_I2C_DEV_SEPARATE_DFSRR FS_I2C_SEPARATE_DFSRR
|
|
#define FSL_I2C_DEV_CLOCK_5200 FS_I2C_CLOCK_5200
|
|
#else
|
|
#include <linux/fsl_devices.h>
|
|
#endif
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define MPC_I2C_ADDR 0x00
|
|
#define MPC_I2C_FDR 0x04
|
|
#define MPC_I2C_CR 0x08
|
|
#define MPC_I2C_SR 0x0c
|
|
#define MPC_I2C_DR 0x10
|
|
#define MPC_I2C_DFSRR 0x14
|
|
#define MPC_I2C_REGION 0x20
|
|
|
|
#define CCR_MEN 0x80
|
|
#define CCR_MIEN 0x40
|
|
#define CCR_MSTA 0x20
|
|
#define CCR_MTX 0x10
|
|
#define CCR_TXAK 0x08
|
|
#define CCR_RSTA 0x04
|
|
|
|
#define CSR_MCF 0x80
|
|
#define CSR_MAAS 0x40
|
|
#define CSR_MBB 0x20
|
|
#define CSR_MAL 0x10
|
|
#define CSR_SRW 0x04
|
|
#define CSR_MIF 0x02
|
|
#define CSR_RXAK 0x01
|
|
|
|
struct mpc_i2c {
|
|
void __iomem *base;
|
|
u32 interrupt;
|
|
wait_queue_head_t queue;
|
|
struct i2c_adapter adap;
|
|
int irq;
|
|
u32 flags;
|
|
};
|
|
|
|
static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x)
|
|
{
|
|
writeb(x, i2c->base + MPC_I2C_CR);
|
|
}
|
|
|
|
static irqreturn_t mpc_i2c_isr(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct mpc_i2c *i2c = dev_id;
|
|
if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
|
|
/* Read again to allow register to stabilise */
|
|
i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
|
|
writeb(0, i2c->base + MPC_I2C_SR);
|
|
wake_up_interruptible(&i2c->queue);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
|
|
{
|
|
unsigned long orig_jiffies = jiffies;
|
|
u32 x;
|
|
int result = 0;
|
|
|
|
if (i2c->irq == 0)
|
|
{
|
|
while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
|
|
schedule();
|
|
if (time_after(jiffies, orig_jiffies + timeout)) {
|
|
pr_debug("I2C: timeout\n");
|
|
result = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
x = readb(i2c->base + MPC_I2C_SR);
|
|
writeb(0, i2c->base + MPC_I2C_SR);
|
|
} else {
|
|
/* Interrupt mode */
|
|
result = wait_event_interruptible_timeout(i2c->queue,
|
|
(i2c->interrupt & CSR_MIF), timeout * HZ);
|
|
|
|
if (unlikely(result < 0))
|
|
pr_debug("I2C: wait interrupted\n");
|
|
else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
|
|
pr_debug("I2C: wait timeout\n");
|
|
result = -ETIMEDOUT;
|
|
}
|
|
|
|
x = i2c->interrupt;
|
|
i2c->interrupt = 0;
|
|
}
|
|
|
|
if (result < 0)
|
|
return result;
|
|
|
|
if (!(x & CSR_MCF)) {
|
|
pr_debug("I2C: unfinished\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (x & CSR_MAL) {
|
|
pr_debug("I2C: MAL\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (writing && (x & CSR_RXAK)) {
|
|
pr_debug("I2C: No RXAK\n");
|
|
/* generate stop */
|
|
writeccr(i2c, CCR_MEN);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mpc_i2c_setclock(struct mpc_i2c *i2c)
|
|
{
|
|
/* Set clock and filters */
|
|
if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) {
|
|
writeb(0x31, i2c->base + MPC_I2C_FDR);
|
|
writeb(0x10, i2c->base + MPC_I2C_DFSRR);
|
|
} else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200)
|
|
writeb(0x3f, i2c->base + MPC_I2C_FDR);
|
|
else
|
|
writel(0x1031, i2c->base + MPC_I2C_FDR);
|
|
}
|
|
|
|
static void mpc_i2c_start(struct mpc_i2c *i2c)
|
|
{
|
|
/* Clear arbitration */
|
|
writeb(0, i2c->base + MPC_I2C_SR);
|
|
/* Start with MEN */
|
|
writeccr(i2c, CCR_MEN);
|
|
}
|
|
|
|
static void mpc_i2c_stop(struct mpc_i2c *i2c)
|
|
{
|
|
writeccr(i2c, CCR_MEN);
|
|
}
|
|
|
|
static int mpc_write(struct mpc_i2c *i2c, int target,
|
|
const u8 * data, int length, int restart)
|
|
{
|
|
int i;
|
|
unsigned timeout = i2c->adap.timeout;
|
|
u32 flags = restart ? CCR_RSTA : 0;
|
|
|
|
/* Start with MEN */
|
|
if (!restart)
|
|
writeccr(i2c, CCR_MEN);
|
|
/* Start as master */
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
|
|
/* Write target byte */
|
|
writeb((target << 1), i2c->base + MPC_I2C_DR);
|
|
|
|
if (i2c_wait(i2c, timeout, 1) < 0)
|
|
return -1;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
/* Write data byte */
|
|
writeb(data[i], i2c->base + MPC_I2C_DR);
|
|
|
|
if (i2c_wait(i2c, timeout, 1) < 0)
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc_read(struct mpc_i2c *i2c, int target,
|
|
u8 * data, int length, int restart)
|
|
{
|
|
unsigned timeout = i2c->adap.timeout;
|
|
int i;
|
|
u32 flags = restart ? CCR_RSTA : 0;
|
|
|
|
/* Start with MEN */
|
|
if (!restart)
|
|
writeccr(i2c, CCR_MEN);
|
|
/* Switch to read - restart */
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
|
|
/* Write target address byte - this time with the read flag set */
|
|
writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
|
|
|
|
if (i2c_wait(i2c, timeout, 1) < 0)
|
|
return -1;
|
|
|
|
if (length) {
|
|
if (length == 1)
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
|
|
else
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
|
|
/* Dummy read */
|
|
readb(i2c->base + MPC_I2C_DR);
|
|
}
|
|
|
|
for (i = 0; i < length; i++) {
|
|
if (i2c_wait(i2c, timeout, 0) < 0)
|
|
return -1;
|
|
|
|
/* Generate txack on next to last byte */
|
|
if (i == length - 2)
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
|
|
/* Generate stop on last byte */
|
|
if (i == length - 1)
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK);
|
|
data[i] = readb(i2c->base + MPC_I2C_DR);
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct i2c_msg *pmsg;
|
|
int i;
|
|
int ret = 0;
|
|
unsigned long orig_jiffies = jiffies;
|
|
struct mpc_i2c *i2c = i2c_get_adapdata(adap);
|
|
|
|
mpc_i2c_start(i2c);
|
|
|
|
/* Allow bus up to 1s to become not busy */
|
|
while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
|
|
if (signal_pending(current)) {
|
|
pr_debug("I2C: Interrupted\n");
|
|
return -EINTR;
|
|
}
|
|
if (time_after(jiffies, orig_jiffies + HZ)) {
|
|
pr_debug("I2C: timeout\n");
|
|
return -EIO;
|
|
}
|
|
schedule();
|
|
}
|
|
|
|
for (i = 0; ret >= 0 && i < num; i++) {
|
|
pmsg = &msgs[i];
|
|
pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
|
|
pmsg->flags & I2C_M_RD ? "read" : "write",
|
|
pmsg->len, pmsg->addr, i + 1, num);
|
|
if (pmsg->flags & I2C_M_RD)
|
|
ret =
|
|
mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
|
|
else
|
|
ret =
|
|
mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
|
|
}
|
|
mpc_i2c_stop(i2c);
|
|
return (ret < 0) ? ret : num;
|
|
}
|
|
|
|
static u32 mpc_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static struct i2c_algorithm mpc_algo = {
|
|
.name = "MPC algorithm",
|
|
.id = I2C_ALGO_MPC107,
|
|
.master_xfer = mpc_xfer,
|
|
.functionality = mpc_functionality,
|
|
};
|
|
|
|
static struct i2c_adapter mpc_ops = {
|
|
.owner = THIS_MODULE,
|
|
.name = "MPC adapter",
|
|
.id = I2C_ALGO_MPC107 | I2C_HW_MPC107,
|
|
.algo = &mpc_algo,
|
|
.class = I2C_CLASS_HWMON,
|
|
.timeout = 1,
|
|
.retries = 1
|
|
};
|
|
|
|
#ifdef CONFIG_FSL_OCP
|
|
static int __devinit mpc_i2c_probe(struct ocp_device *ocp)
|
|
{
|
|
int result = 0;
|
|
struct mpc_i2c *i2c;
|
|
|
|
if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
|
|
return -ENOMEM;
|
|
}
|
|
memset(i2c, 0, sizeof(*i2c));
|
|
|
|
i2c->irq = ocp->def->irq;
|
|
i2c->flags = ((struct ocp_fs_i2c_data *)ocp->def->additions)->flags;
|
|
init_waitqueue_head(&i2c->queue);
|
|
|
|
if (!request_mem_region(ocp->def->paddr, MPC_I2C_REGION, "i2c-mpc")) {
|
|
printk(KERN_ERR "i2c-mpc - resource unavailable\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
i2c->base = ioremap(ocp->def->paddr, MPC_I2C_REGION);
|
|
|
|
if (!i2c->base) {
|
|
printk(KERN_ERR "i2c-mpc - failed to map controller\n");
|
|
result = -ENOMEM;
|
|
goto fail_map;
|
|
}
|
|
|
|
if (i2c->irq != OCP_IRQ_NA)
|
|
{
|
|
if ((result = request_irq(ocp->def->irq, mpc_i2c_isr,
|
|
0, "i2c-mpc", i2c)) < 0) {
|
|
printk(KERN_ERR
|
|
"i2c-mpc - failed to attach interrupt\n");
|
|
goto fail_irq;
|
|
}
|
|
} else
|
|
i2c->irq = 0;
|
|
|
|
i2c->adap = mpc_ops;
|
|
i2c_set_adapdata(&i2c->adap, i2c);
|
|
|
|
if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
|
|
printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
|
|
goto fail_add;
|
|
}
|
|
|
|
mpc_i2c_setclock(i2c);
|
|
ocp_set_drvdata(ocp, i2c);
|
|
return result;
|
|
|
|
fail_add:
|
|
if (ocp->def->irq != OCP_IRQ_NA)
|
|
free_irq(ocp->def->irq, 0);
|
|
fail_irq:
|
|
iounmap(i2c->base);
|
|
fail_map:
|
|
release_mem_region(ocp->def->paddr, MPC_I2C_REGION);
|
|
kfree(i2c);
|
|
return result;
|
|
}
|
|
static void __devexit mpc_i2c_remove(struct ocp_device *ocp)
|
|
{
|
|
struct mpc_i2c *i2c = ocp_get_drvdata(ocp);
|
|
ocp_set_drvdata(ocp, NULL);
|
|
i2c_del_adapter(&i2c->adap);
|
|
|
|
if (ocp->def->irq != OCP_IRQ_NA)
|
|
free_irq(i2c->irq, i2c);
|
|
iounmap(i2c->base);
|
|
release_mem_region(ocp->def->paddr, MPC_I2C_REGION);
|
|
kfree(i2c);
|
|
}
|
|
|
|
static struct ocp_device_id mpc_iic_ids[] __devinitdata = {
|
|
{.vendor = OCP_VENDOR_FREESCALE,.function = OCP_FUNC_IIC},
|
|
{.vendor = OCP_VENDOR_INVALID}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(ocp, mpc_iic_ids);
|
|
|
|
static struct ocp_driver mpc_iic_driver = {
|
|
.name = "iic",
|
|
.id_table = mpc_iic_ids,
|
|
.probe = mpc_i2c_probe,
|
|
.remove = __devexit_p(mpc_i2c_remove)
|
|
};
|
|
|
|
static int __init iic_init(void)
|
|
{
|
|
return ocp_register_driver(&mpc_iic_driver);
|
|
}
|
|
|
|
static void __exit iic_exit(void)
|
|
{
|
|
ocp_unregister_driver(&mpc_iic_driver);
|
|
}
|
|
|
|
module_init(iic_init);
|
|
module_exit(iic_exit);
|
|
#else
|
|
static int fsl_i2c_probe(struct device *device)
|
|
{
|
|
int result = 0;
|
|
struct mpc_i2c *i2c;
|
|
struct platform_device *pdev = to_platform_device(device);
|
|
struct fsl_i2c_platform_data *pdata;
|
|
struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
|
|
|
|
if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
|
|
return -ENOMEM;
|
|
}
|
|
memset(i2c, 0, sizeof(*i2c));
|
|
|
|
i2c->irq = platform_get_irq(pdev, 0);
|
|
i2c->flags = pdata->device_flags;
|
|
init_waitqueue_head(&i2c->queue);
|
|
|
|
i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION);
|
|
|
|
if (!i2c->base) {
|
|
printk(KERN_ERR "i2c-mpc - failed to map controller\n");
|
|
result = -ENOMEM;
|
|
goto fail_map;
|
|
}
|
|
|
|
if (i2c->irq != 0)
|
|
if ((result = request_irq(i2c->irq, mpc_i2c_isr,
|
|
0, "fsl-i2c", i2c)) < 0) {
|
|
printk(KERN_ERR
|
|
"i2c-mpc - failed to attach interrupt\n");
|
|
goto fail_irq;
|
|
}
|
|
|
|
i2c->adap = mpc_ops;
|
|
i2c_set_adapdata(&i2c->adap, i2c);
|
|
i2c->adap.dev.parent = &pdev->dev;
|
|
if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
|
|
printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
|
|
goto fail_add;
|
|
}
|
|
|
|
mpc_i2c_setclock(i2c);
|
|
dev_set_drvdata(device, i2c);
|
|
return result;
|
|
|
|
fail_add:
|
|
if (i2c->irq != 0)
|
|
free_irq(i2c->irq, NULL);
|
|
fail_irq:
|
|
iounmap(i2c->base);
|
|
fail_map:
|
|
kfree(i2c);
|
|
return result;
|
|
};
|
|
|
|
static int fsl_i2c_remove(struct device *device)
|
|
{
|
|
struct mpc_i2c *i2c = dev_get_drvdata(device);
|
|
|
|
dev_set_drvdata(device, NULL);
|
|
i2c_del_adapter(&i2c->adap);
|
|
|
|
if (i2c->irq != 0)
|
|
free_irq(i2c->irq, i2c);
|
|
|
|
iounmap(i2c->base);
|
|
kfree(i2c);
|
|
return 0;
|
|
};
|
|
|
|
/* Structure for a device driver */
|
|
static struct device_driver fsl_i2c_driver = {
|
|
.name = "fsl-i2c",
|
|
.bus = &platform_bus_type,
|
|
.probe = fsl_i2c_probe,
|
|
.remove = fsl_i2c_remove,
|
|
};
|
|
|
|
static int __init fsl_i2c_init(void)
|
|
{
|
|
return driver_register(&fsl_i2c_driver);
|
|
}
|
|
|
|
static void __exit fsl_i2c_exit(void)
|
|
{
|
|
driver_unregister(&fsl_i2c_driver);
|
|
}
|
|
|
|
module_init(fsl_i2c_init);
|
|
module_exit(fsl_i2c_exit);
|
|
|
|
#endif /* CONFIG_FSL_OCP */
|
|
|
|
MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
|
|
MODULE_DESCRIPTION
|
|
("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors");
|
|
MODULE_LICENSE("GPL");
|