319 lines
8.3 KiB
C
319 lines
8.3 KiB
C
/*
|
|
* mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
|
|
*
|
|
* Copyright (C) 2009 Samsung Electronics Co.Ltd
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*
|
|
* Based on wm97xx-core.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/mcs.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Registers */
|
|
#define MCS5000_TS_STATUS 0x00
|
|
#define STATUS_OFFSET 0
|
|
#define STATUS_NO (0 << STATUS_OFFSET)
|
|
#define STATUS_INIT (1 << STATUS_OFFSET)
|
|
#define STATUS_SENSING (2 << STATUS_OFFSET)
|
|
#define STATUS_COORD (3 << STATUS_OFFSET)
|
|
#define STATUS_GESTURE (4 << STATUS_OFFSET)
|
|
#define ERROR_OFFSET 4
|
|
#define ERROR_NO (0 << ERROR_OFFSET)
|
|
#define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET)
|
|
#define ERROR_INT_RESET (2 << ERROR_OFFSET)
|
|
#define ERROR_EXT_RESET (3 << ERROR_OFFSET)
|
|
#define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET)
|
|
#define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET)
|
|
|
|
#define MCS5000_TS_OP_MODE 0x01
|
|
#define RESET_OFFSET 0
|
|
#define RESET_NO (0 << RESET_OFFSET)
|
|
#define RESET_EXT_SOFT (1 << RESET_OFFSET)
|
|
#define OP_MODE_OFFSET 1
|
|
#define OP_MODE_SLEEP (0 << OP_MODE_OFFSET)
|
|
#define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET)
|
|
#define GESTURE_OFFSET 4
|
|
#define GESTURE_DISABLE (0 << GESTURE_OFFSET)
|
|
#define GESTURE_ENABLE (1 << GESTURE_OFFSET)
|
|
#define PROXIMITY_OFFSET 5
|
|
#define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET)
|
|
#define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET)
|
|
#define SCAN_MODE_OFFSET 6
|
|
#define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET)
|
|
#define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET)
|
|
#define REPORT_RATE_OFFSET 7
|
|
#define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET)
|
|
#define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET)
|
|
|
|
#define MCS5000_TS_SENS_CTL 0x02
|
|
#define MCS5000_TS_FILTER_CTL 0x03
|
|
#define PRI_FILTER_OFFSET 0
|
|
#define SEC_FILTER_OFFSET 4
|
|
|
|
#define MCS5000_TS_X_SIZE_UPPER 0x08
|
|
#define MCS5000_TS_X_SIZE_LOWER 0x09
|
|
#define MCS5000_TS_Y_SIZE_UPPER 0x0A
|
|
#define MCS5000_TS_Y_SIZE_LOWER 0x0B
|
|
|
|
#define MCS5000_TS_INPUT_INFO 0x10
|
|
#define INPUT_TYPE_OFFSET 0
|
|
#define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET)
|
|
#define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET)
|
|
#define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET)
|
|
#define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET)
|
|
#define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET)
|
|
#define GESTURE_CODE_OFFSET 3
|
|
#define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET)
|
|
|
|
#define MCS5000_TS_X_POS_UPPER 0x11
|
|
#define MCS5000_TS_X_POS_LOWER 0x12
|
|
#define MCS5000_TS_Y_POS_UPPER 0x13
|
|
#define MCS5000_TS_Y_POS_LOWER 0x14
|
|
#define MCS5000_TS_Z_POS 0x15
|
|
#define MCS5000_TS_WIDTH 0x16
|
|
#define MCS5000_TS_GESTURE_VAL 0x17
|
|
#define MCS5000_TS_MODULE_REV 0x20
|
|
#define MCS5000_TS_FIRMWARE_VER 0x21
|
|
|
|
/* Touchscreen absolute values */
|
|
#define MCS5000_MAX_XC 0x3ff
|
|
#define MCS5000_MAX_YC 0x3ff
|
|
|
|
enum mcs5000_ts_read_offset {
|
|
READ_INPUT_INFO,
|
|
READ_X_POS_UPPER,
|
|
READ_X_POS_LOWER,
|
|
READ_Y_POS_UPPER,
|
|
READ_Y_POS_LOWER,
|
|
READ_BLOCK_SIZE,
|
|
};
|
|
|
|
/* Each client has this additional data */
|
|
struct mcs5000_ts_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
const struct mcs_platform_data *platform_data;
|
|
};
|
|
|
|
static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mcs5000_ts_data *data = dev_id;
|
|
struct i2c_client *client = data->client;
|
|
u8 buffer[READ_BLOCK_SIZE];
|
|
int err;
|
|
int x;
|
|
int y;
|
|
|
|
err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
|
|
READ_BLOCK_SIZE, buffer);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
|
|
goto out;
|
|
}
|
|
|
|
switch (buffer[READ_INPUT_INFO]) {
|
|
case INPUT_TYPE_NONTOUCH:
|
|
input_report_key(data->input_dev, BTN_TOUCH, 0);
|
|
input_sync(data->input_dev);
|
|
break;
|
|
|
|
case INPUT_TYPE_SINGLE:
|
|
x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
|
|
y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
|
|
|
|
input_report_key(data->input_dev, BTN_TOUCH, 1);
|
|
input_report_abs(data->input_dev, ABS_X, x);
|
|
input_report_abs(data->input_dev, ABS_Y, y);
|
|
input_sync(data->input_dev);
|
|
break;
|
|
|
|
case INPUT_TYPE_DUAL:
|
|
/* TODO */
|
|
break;
|
|
|
|
case INPUT_TYPE_PALM:
|
|
/* TODO */
|
|
break;
|
|
|
|
case INPUT_TYPE_PROXIMITY:
|
|
/* TODO */
|
|
break;
|
|
|
|
default:
|
|
dev_err(&client->dev, "Unknown ts input type %d\n",
|
|
buffer[READ_INPUT_INFO]);
|
|
break;
|
|
}
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
|
|
{
|
|
const struct mcs_platform_data *platform_data =
|
|
data->platform_data;
|
|
struct i2c_client *client = data->client;
|
|
|
|
/* Touch reset & sleep mode */
|
|
i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
|
|
RESET_EXT_SOFT | OP_MODE_SLEEP);
|
|
|
|
/* Touch size */
|
|
i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
|
|
platform_data->x_size >> 8);
|
|
i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
|
|
platform_data->x_size & 0xff);
|
|
i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
|
|
platform_data->y_size >> 8);
|
|
i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
|
|
platform_data->y_size & 0xff);
|
|
|
|
/* Touch active mode & 80 report rate */
|
|
i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
|
|
OP_MODE_ACTIVE | REPORT_RATE_80);
|
|
}
|
|
|
|
static int __devinit mcs5000_ts_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mcs5000_ts_data *data;
|
|
struct input_dev *input_dev;
|
|
int ret;
|
|
|
|
if (!client->dev.platform_data)
|
|
return -EINVAL;
|
|
|
|
data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!data || !input_dev) {
|
|
dev_err(&client->dev, "Failed to allocate memory\n");
|
|
ret = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
data->client = client;
|
|
data->input_dev = input_dev;
|
|
data->platform_data = client->dev.platform_data;
|
|
|
|
input_dev->name = "MELPAS MCS-5000 Touchscreen";
|
|
input_dev->id.bustype = BUS_I2C;
|
|
input_dev->dev.parent = &client->dev;
|
|
|
|
__set_bit(EV_ABS, input_dev->evbit);
|
|
__set_bit(EV_KEY, input_dev->evbit);
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
|
|
|
|
input_set_drvdata(input_dev, data);
|
|
|
|
if (data->platform_data->cfg_pin)
|
|
data->platform_data->cfg_pin();
|
|
|
|
ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Failed to register interrupt\n");
|
|
goto err_free_mem;
|
|
}
|
|
|
|
ret = input_register_device(data->input_dev);
|
|
if (ret < 0)
|
|
goto err_free_irq;
|
|
|
|
mcs5000_ts_phys_init(data);
|
|
i2c_set_clientdata(client, data);
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(client->irq, data);
|
|
err_free_mem:
|
|
input_free_device(input_dev);
|
|
kfree(data);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit mcs5000_ts_remove(struct i2c_client *client)
|
|
{
|
|
struct mcs5000_ts_data *data = i2c_get_clientdata(client);
|
|
|
|
free_irq(client->irq, data);
|
|
input_unregister_device(data->input_dev);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg)
|
|
{
|
|
/* Touch sleep mode */
|
|
i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcs5000_ts_resume(struct i2c_client *client)
|
|
{
|
|
struct mcs5000_ts_data *data = i2c_get_clientdata(client);
|
|
|
|
mcs5000_ts_phys_init(data);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define mcs5000_ts_suspend NULL
|
|
#define mcs5000_ts_resume NULL
|
|
#endif
|
|
|
|
static const struct i2c_device_id mcs5000_ts_id[] = {
|
|
{ "mcs5000_ts", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
|
|
|
|
static struct i2c_driver mcs5000_ts_driver = {
|
|
.probe = mcs5000_ts_probe,
|
|
.remove = __devexit_p(mcs5000_ts_remove),
|
|
.suspend = mcs5000_ts_suspend,
|
|
.resume = mcs5000_ts_resume,
|
|
.driver = {
|
|
.name = "mcs5000_ts",
|
|
},
|
|
.id_table = mcs5000_ts_id,
|
|
};
|
|
|
|
static int __init mcs5000_ts_init(void)
|
|
{
|
|
return i2c_add_driver(&mcs5000_ts_driver);
|
|
}
|
|
|
|
static void __exit mcs5000_ts_exit(void)
|
|
{
|
|
i2c_del_driver(&mcs5000_ts_driver);
|
|
}
|
|
|
|
module_init(mcs5000_ts_init);
|
|
module_exit(mcs5000_ts_exit);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
|
|
MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
|
|
MODULE_LICENSE("GPL");
|