1388 lines
30 KiB
C
1388 lines
30 KiB
C
/*
|
|
* Afatech AF9033 demodulator driver
|
|
*
|
|
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
|
|
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include "af9033_priv.h"
|
|
|
|
/* Max transfer size done by I2C transfer functions */
|
|
#define MAX_XFER_SIZE 64
|
|
|
|
struct af9033_dev {
|
|
struct i2c_client *client;
|
|
struct dvb_frontend fe;
|
|
struct af9033_config cfg;
|
|
bool is_af9035;
|
|
bool is_it9135;
|
|
|
|
u32 bandwidth_hz;
|
|
bool ts_mode_parallel;
|
|
bool ts_mode_serial;
|
|
|
|
enum fe_status fe_status;
|
|
u64 post_bit_error_prev; /* for old read_ber we return (curr - prev) */
|
|
u64 post_bit_error;
|
|
u64 post_bit_count;
|
|
u64 error_block_count;
|
|
u64 total_block_count;
|
|
};
|
|
|
|
/* write multiple registers */
|
|
static int af9033_wr_regs(struct af9033_dev *dev, u32 reg, const u8 *val,
|
|
int len)
|
|
{
|
|
int ret;
|
|
u8 buf[MAX_XFER_SIZE];
|
|
struct i2c_msg msg[1] = {
|
|
{
|
|
.addr = dev->client->addr,
|
|
.flags = 0,
|
|
.len = 3 + len,
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
if (3 + len > sizeof(buf)) {
|
|
dev_warn(&dev->client->dev,
|
|
"i2c wr reg=%04x: len=%d is too big!\n",
|
|
reg, len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
buf[0] = (reg >> 16) & 0xff;
|
|
buf[1] = (reg >> 8) & 0xff;
|
|
buf[2] = (reg >> 0) & 0xff;
|
|
memcpy(&buf[3], val, len);
|
|
|
|
ret = i2c_transfer(dev->client->adapter, msg, 1);
|
|
if (ret == 1) {
|
|
ret = 0;
|
|
} else {
|
|
dev_warn(&dev->client->dev, "i2c wr failed=%d reg=%06x len=%d\n",
|
|
ret, reg, len);
|
|
ret = -EREMOTEIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* read multiple registers */
|
|
static int af9033_rd_regs(struct af9033_dev *dev, u32 reg, u8 *val, int len)
|
|
{
|
|
int ret;
|
|
u8 buf[3] = { (reg >> 16) & 0xff, (reg >> 8) & 0xff,
|
|
(reg >> 0) & 0xff };
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = dev->client->addr,
|
|
.flags = 0,
|
|
.len = sizeof(buf),
|
|
.buf = buf
|
|
}, {
|
|
.addr = dev->client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = len,
|
|
.buf = val
|
|
}
|
|
};
|
|
|
|
ret = i2c_transfer(dev->client->adapter, msg, 2);
|
|
if (ret == 2) {
|
|
ret = 0;
|
|
} else {
|
|
dev_warn(&dev->client->dev, "i2c rd failed=%d reg=%06x len=%d\n",
|
|
ret, reg, len);
|
|
ret = -EREMOTEIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* write single register */
|
|
static int af9033_wr_reg(struct af9033_dev *dev, u32 reg, u8 val)
|
|
{
|
|
return af9033_wr_regs(dev, reg, &val, 1);
|
|
}
|
|
|
|
/* read single register */
|
|
static int af9033_rd_reg(struct af9033_dev *dev, u32 reg, u8 *val)
|
|
{
|
|
return af9033_rd_regs(dev, reg, val, 1);
|
|
}
|
|
|
|
/* write single register with mask */
|
|
static int af9033_wr_reg_mask(struct af9033_dev *dev, u32 reg, u8 val,
|
|
u8 mask)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
/* no need for read if whole reg is written */
|
|
if (mask != 0xff) {
|
|
ret = af9033_rd_regs(dev, reg, &tmp, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= mask;
|
|
tmp &= ~mask;
|
|
val |= tmp;
|
|
}
|
|
|
|
return af9033_wr_regs(dev, reg, &val, 1);
|
|
}
|
|
|
|
/* read single register with mask */
|
|
static int af9033_rd_reg_mask(struct af9033_dev *dev, u32 reg, u8 *val,
|
|
u8 mask)
|
|
{
|
|
int ret, i;
|
|
u8 tmp;
|
|
|
|
ret = af9033_rd_regs(dev, reg, &tmp, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tmp &= mask;
|
|
|
|
/* find position of the first bit */
|
|
for (i = 0; i < 8; i++) {
|
|
if ((mask >> i) & 0x01)
|
|
break;
|
|
}
|
|
*val = tmp >> i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* write reg val table using reg addr auto increment */
|
|
static int af9033_wr_reg_val_tab(struct af9033_dev *dev,
|
|
const struct reg_val *tab, int tab_len)
|
|
{
|
|
#define MAX_TAB_LEN 212
|
|
int ret, i, j;
|
|
u8 buf[1 + MAX_TAB_LEN];
|
|
|
|
dev_dbg(&dev->client->dev, "tab_len=%d\n", tab_len);
|
|
|
|
if (tab_len > sizeof(buf)) {
|
|
dev_warn(&dev->client->dev, "tab len %d is too big\n", tab_len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0, j = 0; i < tab_len; i++) {
|
|
buf[j] = tab[i].val;
|
|
|
|
if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1) {
|
|
ret = af9033_wr_regs(dev, tab[i].reg - j, buf, j + 1);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
j = 0;
|
|
} else {
|
|
j++;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 af9033_div(struct af9033_dev *dev, u32 a, u32 b, u32 x)
|
|
{
|
|
u32 r = 0, c = 0, i;
|
|
|
|
dev_dbg(&dev->client->dev, "a=%d b=%d x=%d\n", a, b, x);
|
|
|
|
if (a > b) {
|
|
c = a / b;
|
|
a = a - c * b;
|
|
}
|
|
|
|
for (i = 0; i < x; i++) {
|
|
if (a >= b) {
|
|
r += 1;
|
|
a -= b;
|
|
}
|
|
a <<= 1;
|
|
r <<= 1;
|
|
}
|
|
r = (c << (u32)x) + r;
|
|
|
|
dev_dbg(&dev->client->dev, "a=%d b=%d x=%d r=%d r=%x\n", a, b, x, r, r);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int af9033_init(struct dvb_frontend *fe)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, len;
|
|
const struct reg_val *init;
|
|
u8 buf[4];
|
|
u32 adc_cw, clock_cw;
|
|
struct reg_val_mask tab[] = {
|
|
{ 0x80fb24, 0x00, 0x08 },
|
|
{ 0x80004c, 0x00, 0xff },
|
|
{ 0x00f641, dev->cfg.tuner, 0xff },
|
|
{ 0x80f5ca, 0x01, 0x01 },
|
|
{ 0x80f715, 0x01, 0x01 },
|
|
{ 0x00f41f, 0x04, 0x04 },
|
|
{ 0x00f41a, 0x01, 0x01 },
|
|
{ 0x80f731, 0x00, 0x01 },
|
|
{ 0x00d91e, 0x00, 0x01 },
|
|
{ 0x00d919, 0x00, 0x01 },
|
|
{ 0x80f732, 0x00, 0x01 },
|
|
{ 0x00d91f, 0x00, 0x01 },
|
|
{ 0x00d91a, 0x00, 0x01 },
|
|
{ 0x80f730, 0x00, 0x01 },
|
|
{ 0x80f778, 0x00, 0xff },
|
|
{ 0x80f73c, 0x01, 0x01 },
|
|
{ 0x80f776, 0x00, 0x01 },
|
|
{ 0x00d8fd, 0x01, 0xff },
|
|
{ 0x00d830, 0x01, 0xff },
|
|
{ 0x00d831, 0x00, 0xff },
|
|
{ 0x00d832, 0x00, 0xff },
|
|
{ 0x80f985, dev->ts_mode_serial, 0x01 },
|
|
{ 0x80f986, dev->ts_mode_parallel, 0x01 },
|
|
{ 0x00d827, 0x00, 0xff },
|
|
{ 0x00d829, 0x00, 0xff },
|
|
{ 0x800045, dev->cfg.adc_multiplier, 0xff },
|
|
};
|
|
|
|
/* program clock control */
|
|
clock_cw = af9033_div(dev, dev->cfg.clock, 1000000ul, 19ul);
|
|
buf[0] = (clock_cw >> 0) & 0xff;
|
|
buf[1] = (clock_cw >> 8) & 0xff;
|
|
buf[2] = (clock_cw >> 16) & 0xff;
|
|
buf[3] = (clock_cw >> 24) & 0xff;
|
|
|
|
dev_dbg(&dev->client->dev, "clock=%d clock_cw=%08x\n",
|
|
dev->cfg.clock, clock_cw);
|
|
|
|
ret = af9033_wr_regs(dev, 0x800025, buf, 4);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* program ADC control */
|
|
for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
|
|
if (clock_adc_lut[i].clock == dev->cfg.clock)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(clock_adc_lut)) {
|
|
dev_err(&dev->client->dev,
|
|
"Couldn't find ADC config for clock=%d\n",
|
|
dev->cfg.clock);
|
|
goto err;
|
|
}
|
|
|
|
adc_cw = af9033_div(dev, clock_adc_lut[i].adc, 1000000ul, 19ul);
|
|
buf[0] = (adc_cw >> 0) & 0xff;
|
|
buf[1] = (adc_cw >> 8) & 0xff;
|
|
buf[2] = (adc_cw >> 16) & 0xff;
|
|
|
|
dev_dbg(&dev->client->dev, "adc=%d adc_cw=%06x\n",
|
|
clock_adc_lut[i].adc, adc_cw);
|
|
|
|
ret = af9033_wr_regs(dev, 0x80f1cd, buf, 3);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* program register table */
|
|
for (i = 0; i < ARRAY_SIZE(tab); i++) {
|
|
ret = af9033_wr_reg_mask(dev, tab[i].reg, tab[i].val,
|
|
tab[i].mask);
|
|
if (ret < 0)
|
|
goto err;
|
|
}
|
|
|
|
/* clock output */
|
|
if (dev->cfg.dyn0_clk) {
|
|
ret = af9033_wr_reg(dev, 0x80fba8, 0x00);
|
|
if (ret < 0)
|
|
goto err;
|
|
}
|
|
|
|
/* settings for TS interface */
|
|
if (dev->cfg.ts_mode == AF9033_TS_MODE_USB) {
|
|
ret = af9033_wr_reg_mask(dev, 0x80f9a5, 0x00, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x80f9b5, 0x01, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
} else {
|
|
ret = af9033_wr_reg_mask(dev, 0x80f990, 0x00, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x80f9b5, 0x00, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
}
|
|
|
|
/* load OFSM settings */
|
|
dev_dbg(&dev->client->dev, "load ofsm settings\n");
|
|
switch (dev->cfg.tuner) {
|
|
case AF9033_TUNER_IT9135_38:
|
|
case AF9033_TUNER_IT9135_51:
|
|
case AF9033_TUNER_IT9135_52:
|
|
len = ARRAY_SIZE(ofsm_init_it9135_v1);
|
|
init = ofsm_init_it9135_v1;
|
|
break;
|
|
case AF9033_TUNER_IT9135_60:
|
|
case AF9033_TUNER_IT9135_61:
|
|
case AF9033_TUNER_IT9135_62:
|
|
len = ARRAY_SIZE(ofsm_init_it9135_v2);
|
|
init = ofsm_init_it9135_v2;
|
|
break;
|
|
default:
|
|
len = ARRAY_SIZE(ofsm_init);
|
|
init = ofsm_init;
|
|
break;
|
|
}
|
|
|
|
ret = af9033_wr_reg_val_tab(dev, init, len);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* load tuner specific settings */
|
|
dev_dbg(&dev->client->dev, "load tuner specific settings\n");
|
|
switch (dev->cfg.tuner) {
|
|
case AF9033_TUNER_TUA9001:
|
|
len = ARRAY_SIZE(tuner_init_tua9001);
|
|
init = tuner_init_tua9001;
|
|
break;
|
|
case AF9033_TUNER_FC0011:
|
|
len = ARRAY_SIZE(tuner_init_fc0011);
|
|
init = tuner_init_fc0011;
|
|
break;
|
|
case AF9033_TUNER_MXL5007T:
|
|
len = ARRAY_SIZE(tuner_init_mxl5007t);
|
|
init = tuner_init_mxl5007t;
|
|
break;
|
|
case AF9033_TUNER_TDA18218:
|
|
len = ARRAY_SIZE(tuner_init_tda18218);
|
|
init = tuner_init_tda18218;
|
|
break;
|
|
case AF9033_TUNER_FC2580:
|
|
len = ARRAY_SIZE(tuner_init_fc2580);
|
|
init = tuner_init_fc2580;
|
|
break;
|
|
case AF9033_TUNER_FC0012:
|
|
len = ARRAY_SIZE(tuner_init_fc0012);
|
|
init = tuner_init_fc0012;
|
|
break;
|
|
case AF9033_TUNER_IT9135_38:
|
|
len = ARRAY_SIZE(tuner_init_it9135_38);
|
|
init = tuner_init_it9135_38;
|
|
break;
|
|
case AF9033_TUNER_IT9135_51:
|
|
len = ARRAY_SIZE(tuner_init_it9135_51);
|
|
init = tuner_init_it9135_51;
|
|
break;
|
|
case AF9033_TUNER_IT9135_52:
|
|
len = ARRAY_SIZE(tuner_init_it9135_52);
|
|
init = tuner_init_it9135_52;
|
|
break;
|
|
case AF9033_TUNER_IT9135_60:
|
|
len = ARRAY_SIZE(tuner_init_it9135_60);
|
|
init = tuner_init_it9135_60;
|
|
break;
|
|
case AF9033_TUNER_IT9135_61:
|
|
len = ARRAY_SIZE(tuner_init_it9135_61);
|
|
init = tuner_init_it9135_61;
|
|
break;
|
|
case AF9033_TUNER_IT9135_62:
|
|
len = ARRAY_SIZE(tuner_init_it9135_62);
|
|
init = tuner_init_it9135_62;
|
|
break;
|
|
default:
|
|
dev_dbg(&dev->client->dev, "unsupported tuner ID=%d\n",
|
|
dev->cfg.tuner);
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
ret = af9033_wr_reg_val_tab(dev, init, len);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
if (dev->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
|
|
ret = af9033_wr_reg_mask(dev, 0x00d91c, 0x01, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x00d917, 0x00, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x00d916, 0x00, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
}
|
|
|
|
switch (dev->cfg.tuner) {
|
|
case AF9033_TUNER_IT9135_60:
|
|
case AF9033_TUNER_IT9135_61:
|
|
case AF9033_TUNER_IT9135_62:
|
|
ret = af9033_wr_reg(dev, 0x800000, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
}
|
|
|
|
dev->bandwidth_hz = 0; /* force to program all parameters */
|
|
/* init stats here in order signal app which stats are supported */
|
|
c->strength.len = 1;
|
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->cnr.len = 1;
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_count.len = 1;
|
|
c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_error.len = 1;
|
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.len = 1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_error.len = 1;
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
int ret, i;
|
|
u8 tmp;
|
|
|
|
ret = af9033_wr_reg(dev, 0x80004c, 1);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg(dev, 0x800000, 0);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
for (i = 100, tmp = 1; i && tmp; i--) {
|
|
ret = af9033_rd_reg(dev, 0x80004c, &tmp);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
usleep_range(200, 10000);
|
|
}
|
|
|
|
dev_dbg(&dev->client->dev, "loop=%d\n", i);
|
|
|
|
if (i == 0) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x80fb24, 0x08, 0x08);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* prevent current leak (?) */
|
|
if (dev->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
|
|
/* enable parallel TS */
|
|
ret = af9033_wr_reg_mask(dev, 0x00d917, 0x00, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x00d916, 0x01, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *fesettings)
|
|
{
|
|
/* 800 => 2000 because IT9135 v2 is slow to gain lock */
|
|
fesettings->min_delay_ms = 2000;
|
|
fesettings->step_size = 0;
|
|
fesettings->max_drift = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9033_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, spec_inv, sampling_freq;
|
|
u8 tmp, buf[3], bandwidth_reg_val;
|
|
u32 if_frequency, freq_cw, adc_freq;
|
|
|
|
dev_dbg(&dev->client->dev, "frequency=%d bandwidth_hz=%d\n",
|
|
c->frequency, c->bandwidth_hz);
|
|
|
|
/* check bandwidth */
|
|
switch (c->bandwidth_hz) {
|
|
case 6000000:
|
|
bandwidth_reg_val = 0x00;
|
|
break;
|
|
case 7000000:
|
|
bandwidth_reg_val = 0x01;
|
|
break;
|
|
case 8000000:
|
|
bandwidth_reg_val = 0x02;
|
|
break;
|
|
default:
|
|
dev_dbg(&dev->client->dev, "invalid bandwidth_hz\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* program tuner */
|
|
if (fe->ops.tuner_ops.set_params)
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
|
|
/* program CFOE coefficients */
|
|
if (c->bandwidth_hz != dev->bandwidth_hz) {
|
|
for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
|
|
if (coeff_lut[i].clock == dev->cfg.clock &&
|
|
coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
|
|
break;
|
|
}
|
|
}
|
|
if (i == ARRAY_SIZE(coeff_lut)) {
|
|
dev_err(&dev->client->dev,
|
|
"Couldn't find LUT config for clock=%d\n",
|
|
dev->cfg.clock);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = af9033_wr_regs(dev, 0x800001,
|
|
coeff_lut[i].val, sizeof(coeff_lut[i].val));
|
|
}
|
|
|
|
/* program frequency control */
|
|
if (c->bandwidth_hz != dev->bandwidth_hz) {
|
|
spec_inv = dev->cfg.spec_inv ? -1 : 1;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) {
|
|
if (clock_adc_lut[i].clock == dev->cfg.clock)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(clock_adc_lut)) {
|
|
dev_err(&dev->client->dev,
|
|
"Couldn't find ADC clock for clock=%d\n",
|
|
dev->cfg.clock);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
adc_freq = clock_adc_lut[i].adc;
|
|
|
|
/* get used IF frequency */
|
|
if (fe->ops.tuner_ops.get_if_frequency)
|
|
fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
|
|
else
|
|
if_frequency = 0;
|
|
|
|
sampling_freq = if_frequency;
|
|
|
|
while (sampling_freq > (adc_freq / 2))
|
|
sampling_freq -= adc_freq;
|
|
|
|
if (sampling_freq >= 0)
|
|
spec_inv *= -1;
|
|
else
|
|
sampling_freq *= -1;
|
|
|
|
freq_cw = af9033_div(dev, sampling_freq, adc_freq, 23ul);
|
|
|
|
if (spec_inv == -1)
|
|
freq_cw = 0x800000 - freq_cw;
|
|
|
|
if (dev->cfg.adc_multiplier == AF9033_ADC_MULTIPLIER_2X)
|
|
freq_cw /= 2;
|
|
|
|
buf[0] = (freq_cw >> 0) & 0xff;
|
|
buf[1] = (freq_cw >> 8) & 0xff;
|
|
buf[2] = (freq_cw >> 16) & 0x7f;
|
|
|
|
/* FIXME: there seems to be calculation error here... */
|
|
if (if_frequency == 0)
|
|
buf[2] = 0;
|
|
|
|
ret = af9033_wr_regs(dev, 0x800029, buf, 3);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
dev->bandwidth_hz = c->bandwidth_hz;
|
|
}
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x80f904, bandwidth_reg_val, 0x03);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg(dev, 0x800040, 0x00);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg(dev, 0x800047, 0x00);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x80f999, 0x00, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
if (c->frequency <= 230000000)
|
|
tmp = 0x00; /* VHF */
|
|
else
|
|
tmp = 0x01; /* UHF */
|
|
|
|
ret = af9033_wr_reg(dev, 0x80004b, tmp);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg(dev, 0x800000, 0x00);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *c)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
int ret;
|
|
u8 buf[8];
|
|
|
|
dev_dbg(&dev->client->dev, "\n");
|
|
|
|
/* read all needed registers */
|
|
ret = af9033_rd_regs(dev, 0x80f900, buf, sizeof(buf));
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
switch ((buf[0] >> 0) & 3) {
|
|
case 0:
|
|
c->transmission_mode = TRANSMISSION_MODE_2K;
|
|
break;
|
|
case 1:
|
|
c->transmission_mode = TRANSMISSION_MODE_8K;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[1] >> 0) & 3) {
|
|
case 0:
|
|
c->guard_interval = GUARD_INTERVAL_1_32;
|
|
break;
|
|
case 1:
|
|
c->guard_interval = GUARD_INTERVAL_1_16;
|
|
break;
|
|
case 2:
|
|
c->guard_interval = GUARD_INTERVAL_1_8;
|
|
break;
|
|
case 3:
|
|
c->guard_interval = GUARD_INTERVAL_1_4;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[2] >> 0) & 7) {
|
|
case 0:
|
|
c->hierarchy = HIERARCHY_NONE;
|
|
break;
|
|
case 1:
|
|
c->hierarchy = HIERARCHY_1;
|
|
break;
|
|
case 2:
|
|
c->hierarchy = HIERARCHY_2;
|
|
break;
|
|
case 3:
|
|
c->hierarchy = HIERARCHY_4;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[3] >> 0) & 3) {
|
|
case 0:
|
|
c->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
c->modulation = QAM_16;
|
|
break;
|
|
case 2:
|
|
c->modulation = QAM_64;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[4] >> 0) & 3) {
|
|
case 0:
|
|
c->bandwidth_hz = 6000000;
|
|
break;
|
|
case 1:
|
|
c->bandwidth_hz = 7000000;
|
|
break;
|
|
case 2:
|
|
c->bandwidth_hz = 8000000;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[6] >> 0) & 7) {
|
|
case 0:
|
|
c->code_rate_HP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
c->code_rate_HP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
c->code_rate_HP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->code_rate_HP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
c->code_rate_HP = FEC_7_8;
|
|
break;
|
|
case 5:
|
|
c->code_rate_HP = FEC_NONE;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[7] >> 0) & 7) {
|
|
case 0:
|
|
c->code_rate_LP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
c->code_rate_LP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
c->code_rate_LP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->code_rate_LP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
c->code_rate_LP = FEC_7_8;
|
|
break;
|
|
case 5:
|
|
c->code_rate_LP = FEC_NONE;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, tmp = 0;
|
|
u8 u8tmp, buf[7];
|
|
|
|
dev_dbg(&dev->client->dev, "\n");
|
|
|
|
*status = 0;
|
|
|
|
/* radio channel status, 0=no result, 1=has signal, 2=no signal */
|
|
ret = af9033_rd_reg(dev, 0x800047, &u8tmp);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* has signal */
|
|
if (u8tmp == 0x01)
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
if (u8tmp != 0x02) {
|
|
/* TPS lock */
|
|
ret = af9033_rd_reg_mask(dev, 0x80f5a9, &u8tmp, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
if (u8tmp)
|
|
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI;
|
|
|
|
/* full lock */
|
|
ret = af9033_rd_reg_mask(dev, 0x80f999, &u8tmp, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
if (u8tmp)
|
|
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
|
FE_HAS_LOCK;
|
|
}
|
|
|
|
dev->fe_status = *status;
|
|
|
|
/* signal strength */
|
|
if (dev->fe_status & FE_HAS_SIGNAL) {
|
|
if (dev->is_af9035) {
|
|
ret = af9033_rd_reg(dev, 0x80004a, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
tmp = -u8tmp * 1000;
|
|
} else {
|
|
ret = af9033_rd_reg(dev, 0x8000f7, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
tmp = (u8tmp - 100) * 1000;
|
|
}
|
|
|
|
c->strength.len = 1;
|
|
c->strength.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->strength.stat[0].svalue = tmp;
|
|
} else {
|
|
c->strength.len = 1;
|
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
/* CNR */
|
|
if (dev->fe_status & FE_HAS_VITERBI) {
|
|
u32 snr_val, snr_lut_size;
|
|
const struct val_snr *snr_lut = NULL;
|
|
|
|
/* read value */
|
|
ret = af9033_rd_regs(dev, 0x80002c, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
snr_val = (buf[2] << 16) | (buf[1] << 8) | (buf[0] << 0);
|
|
|
|
/* read superframe number */
|
|
ret = af9033_rd_reg(dev, 0x80f78b, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (u8tmp)
|
|
snr_val /= u8tmp;
|
|
|
|
/* read current transmission mode */
|
|
ret = af9033_rd_reg(dev, 0x80f900, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((u8tmp >> 0) & 3) {
|
|
case 0:
|
|
snr_val *= 4;
|
|
break;
|
|
case 1:
|
|
snr_val *= 1;
|
|
break;
|
|
case 2:
|
|
snr_val *= 2;
|
|
break;
|
|
default:
|
|
snr_val *= 0;
|
|
break;
|
|
}
|
|
|
|
/* read current modulation */
|
|
ret = af9033_rd_reg(dev, 0x80f903, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((u8tmp >> 0) & 3) {
|
|
case 0:
|
|
snr_lut_size = ARRAY_SIZE(qpsk_snr_lut);
|
|
snr_lut = qpsk_snr_lut;
|
|
break;
|
|
case 1:
|
|
snr_lut_size = ARRAY_SIZE(qam16_snr_lut);
|
|
snr_lut = qam16_snr_lut;
|
|
break;
|
|
case 2:
|
|
snr_lut_size = ARRAY_SIZE(qam64_snr_lut);
|
|
snr_lut = qam64_snr_lut;
|
|
break;
|
|
default:
|
|
snr_lut_size = 0;
|
|
tmp = 0;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < snr_lut_size; i++) {
|
|
tmp = snr_lut[i].snr * 1000;
|
|
if (snr_val < snr_lut[i].val)
|
|
break;
|
|
}
|
|
|
|
c->cnr.len = 1;
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->cnr.stat[0].svalue = tmp;
|
|
} else {
|
|
c->cnr.len = 1;
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
/* UCB/PER/BER */
|
|
if (dev->fe_status & FE_HAS_LOCK) {
|
|
/* outer FEC, 204 byte packets */
|
|
u16 abort_packet_count, rsd_packet_count;
|
|
/* inner FEC, bits */
|
|
u32 rsd_bit_err_count;
|
|
|
|
/*
|
|
* Packet count used for measurement is 10000
|
|
* (rsd_packet_count). Maybe it should be increased?
|
|
*/
|
|
|
|
ret = af9033_rd_regs(dev, 0x800032, buf, 7);
|
|
if (ret)
|
|
goto err;
|
|
|
|
abort_packet_count = (buf[1] << 8) | (buf[0] << 0);
|
|
rsd_bit_err_count = (buf[4] << 16) | (buf[3] << 8) | buf[2];
|
|
rsd_packet_count = (buf[6] << 8) | (buf[5] << 0);
|
|
|
|
dev->error_block_count += abort_packet_count;
|
|
dev->total_block_count += rsd_packet_count;
|
|
dev->post_bit_error += rsd_bit_err_count;
|
|
dev->post_bit_count += rsd_packet_count * 204 * 8;
|
|
|
|
c->block_count.len = 1;
|
|
c->block_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_count.stat[0].uvalue = dev->total_block_count;
|
|
|
|
c->block_error.len = 1;
|
|
c->block_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_error.stat[0].uvalue = dev->error_block_count;
|
|
|
|
c->post_bit_count.len = 1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
|
|
|
|
c->post_bit_error.len = 1;
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
|
|
int ret;
|
|
u8 u8tmp;
|
|
|
|
/* use DVBv5 CNR */
|
|
if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL) {
|
|
/* Return 0.1 dB for AF9030 and 0-0xffff for IT9130. */
|
|
if (dev->is_af9035) {
|
|
/* 1000x => 10x (0.1 dB) */
|
|
*snr = div_s64(c->cnr.stat[0].svalue, 100);
|
|
} else {
|
|
/* 1000x => 1x (1 dB) */
|
|
*snr = div_s64(c->cnr.stat[0].svalue, 1000);
|
|
|
|
/* read current modulation */
|
|
ret = af9033_rd_reg(dev, 0x80f903, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* scale value to 0x0000-0xffff */
|
|
switch ((u8tmp >> 0) & 3) {
|
|
case 0:
|
|
*snr = *snr * 0xffff / 23;
|
|
break;
|
|
case 1:
|
|
*snr = *snr * 0xffff / 26;
|
|
break;
|
|
case 2:
|
|
*snr = *snr * 0xffff / 32;
|
|
break;
|
|
default:
|
|
goto err;
|
|
}
|
|
}
|
|
} else {
|
|
*snr = 0;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
|
|
int ret, tmp, power_real;
|
|
u8 u8tmp, gain_offset, buf[7];
|
|
|
|
if (dev->is_af9035) {
|
|
/* read signal strength of 0-100 scale */
|
|
ret = af9033_rd_reg(dev, 0x800048, &u8tmp);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* scale value to 0x0000-0xffff */
|
|
*strength = u8tmp * 0xffff / 100;
|
|
} else {
|
|
ret = af9033_rd_reg(dev, 0x8000f7, &u8tmp);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_rd_regs(dev, 0x80f900, buf, 7);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
if (c->frequency <= 300000000)
|
|
gain_offset = 7; /* VHF */
|
|
else
|
|
gain_offset = 4; /* UHF */
|
|
|
|
power_real = (u8tmp - 100 - gain_offset) -
|
|
power_reference[((buf[3] >> 0) & 3)][((buf[6] >> 0) & 7)];
|
|
|
|
if (power_real < -15)
|
|
tmp = 0;
|
|
else if ((power_real >= -15) && (power_real < 0))
|
|
tmp = (2 * (power_real + 15)) / 3;
|
|
else if ((power_real >= 0) && (power_real < 20))
|
|
tmp = 4 * power_real + 10;
|
|
else if ((power_real >= 20) && (power_real < 35))
|
|
tmp = (2 * (power_real - 20)) / 3 + 90;
|
|
else
|
|
tmp = 100;
|
|
|
|
/* scale value to 0x0000-0xffff */
|
|
*strength = tmp * 0xffff / 100;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
|
|
*ber = (dev->post_bit_error - dev->post_bit_error_prev);
|
|
dev->post_bit_error_prev = dev->post_bit_error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int af9033_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
|
|
*ucblocks = dev->error_block_count;
|
|
return 0;
|
|
}
|
|
|
|
static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
int ret;
|
|
|
|
dev_dbg(&dev->client->dev, "enable=%d\n", enable);
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x00fa04, enable, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
int ret;
|
|
|
|
dev_dbg(&dev->client->dev, "onoff=%d\n", onoff);
|
|
|
|
ret = af9033_wr_reg_mask(dev, 0x80f993, onoff, 0x01);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_pid_filter(struct dvb_frontend *fe, int index, u16 pid,
|
|
int onoff)
|
|
{
|
|
struct af9033_dev *dev = fe->demodulator_priv;
|
|
int ret;
|
|
u8 wbuf[2] = {(pid >> 0) & 0xff, (pid >> 8) & 0xff};
|
|
|
|
dev_dbg(&dev->client->dev, "index=%d pid=%04x onoff=%d\n",
|
|
index, pid, onoff);
|
|
|
|
if (pid > 0x1fff)
|
|
return 0;
|
|
|
|
ret = af9033_wr_regs(dev, 0x80f996, wbuf, 2);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg(dev, 0x80f994, onoff);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = af9033_wr_reg(dev, 0x80f995, index);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops af9033_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Afatech AF9033 (DVB-T)",
|
|
.frequency_min = 174000000,
|
|
.frequency_max = 862000000,
|
|
.frequency_stepsize = 250000,
|
|
.frequency_tolerance = 0,
|
|
.caps = FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_QAM_16 |
|
|
FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO |
|
|
FE_CAN_RECOVER |
|
|
FE_CAN_MUTE_TS
|
|
},
|
|
|
|
.init = af9033_init,
|
|
.sleep = af9033_sleep,
|
|
|
|
.get_tune_settings = af9033_get_tune_settings,
|
|
.set_frontend = af9033_set_frontend,
|
|
.get_frontend = af9033_get_frontend,
|
|
|
|
.read_status = af9033_read_status,
|
|
.read_snr = af9033_read_snr,
|
|
.read_signal_strength = af9033_read_signal_strength,
|
|
.read_ber = af9033_read_ber,
|
|
.read_ucblocks = af9033_read_ucblocks,
|
|
|
|
.i2c_gate_ctrl = af9033_i2c_gate_ctrl,
|
|
};
|
|
|
|
static int af9033_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct af9033_config *cfg = client->dev.platform_data;
|
|
struct af9033_dev *dev;
|
|
int ret;
|
|
u8 buf[8];
|
|
u32 reg;
|
|
|
|
/* allocate memory for the internal state */
|
|
dev = kzalloc(sizeof(struct af9033_dev), GFP_KERNEL);
|
|
if (dev == NULL) {
|
|
ret = -ENOMEM;
|
|
dev_err(&client->dev, "Could not allocate memory for state\n");
|
|
goto err;
|
|
}
|
|
|
|
/* setup the state */
|
|
dev->client = client;
|
|
memcpy(&dev->cfg, cfg, sizeof(struct af9033_config));
|
|
|
|
if (dev->cfg.clock != 12000000) {
|
|
ret = -ENODEV;
|
|
dev_err(&dev->client->dev,
|
|
"unsupported clock %d Hz, only 12000000 Hz is supported currently\n",
|
|
dev->cfg.clock);
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* firmware version */
|
|
switch (dev->cfg.tuner) {
|
|
case AF9033_TUNER_IT9135_38:
|
|
case AF9033_TUNER_IT9135_51:
|
|
case AF9033_TUNER_IT9135_52:
|
|
case AF9033_TUNER_IT9135_60:
|
|
case AF9033_TUNER_IT9135_61:
|
|
case AF9033_TUNER_IT9135_62:
|
|
dev->is_it9135 = true;
|
|
reg = 0x004bfc;
|
|
break;
|
|
default:
|
|
dev->is_af9035 = true;
|
|
reg = 0x0083e9;
|
|
break;
|
|
}
|
|
|
|
ret = af9033_rd_regs(dev, reg, &buf[0], 4);
|
|
if (ret < 0)
|
|
goto err_kfree;
|
|
|
|
ret = af9033_rd_regs(dev, 0x804191, &buf[4], 4);
|
|
if (ret < 0)
|
|
goto err_kfree;
|
|
|
|
dev_info(&dev->client->dev,
|
|
"firmware version: LINK %d.%d.%d.%d - OFDM %d.%d.%d.%d\n",
|
|
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6],
|
|
buf[7]);
|
|
|
|
/* sleep */
|
|
switch (dev->cfg.tuner) {
|
|
case AF9033_TUNER_IT9135_38:
|
|
case AF9033_TUNER_IT9135_51:
|
|
case AF9033_TUNER_IT9135_52:
|
|
case AF9033_TUNER_IT9135_60:
|
|
case AF9033_TUNER_IT9135_61:
|
|
case AF9033_TUNER_IT9135_62:
|
|
/* IT9135 did not like to sleep at that early */
|
|
break;
|
|
default:
|
|
ret = af9033_wr_reg(dev, 0x80004c, 1);
|
|
if (ret < 0)
|
|
goto err_kfree;
|
|
|
|
ret = af9033_wr_reg(dev, 0x800000, 0);
|
|
if (ret < 0)
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* configure internal TS mode */
|
|
switch (dev->cfg.ts_mode) {
|
|
case AF9033_TS_MODE_PARALLEL:
|
|
dev->ts_mode_parallel = true;
|
|
break;
|
|
case AF9033_TS_MODE_SERIAL:
|
|
dev->ts_mode_serial = true;
|
|
break;
|
|
case AF9033_TS_MODE_USB:
|
|
/* usb mode for AF9035 */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&dev->fe.ops, &af9033_ops, sizeof(struct dvb_frontend_ops));
|
|
dev->fe.demodulator_priv = dev;
|
|
*cfg->fe = &dev->fe;
|
|
if (cfg->ops) {
|
|
cfg->ops->pid_filter = af9033_pid_filter;
|
|
cfg->ops->pid_filter_ctrl = af9033_pid_filter_ctrl;
|
|
}
|
|
i2c_set_clientdata(client, dev);
|
|
|
|
dev_info(&dev->client->dev, "Afatech AF9033 successfully attached\n");
|
|
return 0;
|
|
err_kfree:
|
|
kfree(dev);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int af9033_remove(struct i2c_client *client)
|
|
{
|
|
struct af9033_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&dev->client->dev, "\n");
|
|
|
|
dev->fe.ops.release = NULL;
|
|
dev->fe.demodulator_priv = NULL;
|
|
kfree(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id af9033_id_table[] = {
|
|
{"af9033", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, af9033_id_table);
|
|
|
|
static struct i2c_driver af9033_driver = {
|
|
.driver = {
|
|
.name = "af9033",
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = af9033_probe,
|
|
.remove = af9033_remove,
|
|
.id_table = af9033_id_table,
|
|
};
|
|
|
|
module_i2c_driver(af9033_driver);
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("Afatech AF9033 DVB-T demodulator driver");
|
|
MODULE_LICENSE("GPL");
|