linux_old1/include/asm-arm/memory.h

293 lines
8.0 KiB
C

/*
* linux/include/asm-arm/memory.h
*
* Copyright (C) 2000-2002 Russell King
* modification for nommu, Hyok S. Choi, 2004
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Note: this file should not be included by non-asm/.h files
*/
#ifndef __ASM_ARM_MEMORY_H
#define __ASM_ARM_MEMORY_H
/*
* Allow for constants defined here to be used from assembly code
* by prepending the UL suffix only with actual C code compilation.
*/
#ifndef __ASSEMBLY__
#define UL(x) (x##UL)
#else
#define UL(x) (x)
#endif
#include <linux/compiler.h>
#include <asm/arch/memory.h>
#include <asm/sizes.h>
#ifdef CONFIG_MMU
#ifndef TASK_SIZE
/*
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
*/
#define TASK_SIZE UL(0xbf000000)
#define TASK_UNMAPPED_BASE UL(0x40000000)
#endif
/*
* The maximum size of a 26-bit user space task.
*/
#define TASK_SIZE_26 UL(0x04000000)
/*
* Page offset: 3GB
*/
#ifndef PAGE_OFFSET
#define PAGE_OFFSET UL(0xc0000000)
#endif
/*
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
#define MODULE_END (PAGE_OFFSET)
#define MODULE_START (MODULE_END - 16*1048576)
#if TASK_SIZE > MODULE_START
#error Top of user space clashes with start of module space
#endif
/*
* The XIP kernel gets mapped at the bottom of the module vm area.
* Since we use sections to map it, this macro replaces the physical address
* with its virtual address while keeping offset from the base section.
*/
#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff))
/*
* Allow 16MB-aligned ioremap pages
*/
#define IOREMAP_MAX_ORDER 24
#else /* CONFIG_MMU */
/*
* The limitation of user task size can grow up to the end of free ram region.
* It is difficult to define and perhaps will never meet the original meaning
* of this define that was meant to.
* Fortunately, there is no reference for this in noMMU mode, for now.
*/
#ifndef TASK_SIZE
#define TASK_SIZE (CONFIG_DRAM_SIZE)
#endif
#ifndef TASK_UNMAPPED_BASE
#define TASK_UNMAPPED_BASE UL(0x00000000)
#endif
#ifndef PHYS_OFFSET
#define PHYS_OFFSET (CONFIG_DRAM_BASE)
#endif
#ifndef END_MEM
#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
#endif
#ifndef PAGE_OFFSET
#define PAGE_OFFSET (PHYS_OFFSET)
#endif
/*
* The module can be at any place in ram in nommu mode.
*/
#define MODULE_END (END_MEM)
#define MODULE_START (PHYS_OFFSET)
#endif /* !CONFIG_MMU */
/*
* Size of DMA-consistent memory region. Must be multiple of 2M,
* between 2MB and 14MB inclusive.
*/
#ifndef CONSISTENT_DMA_SIZE
#define CONSISTENT_DMA_SIZE SZ_2M
#endif
/*
* Physical vs virtual RAM address space conversion. These are
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
#ifndef __virt_to_phys
#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
#endif
/*
* Convert a physical address to a Page Frame Number and back
*/
#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
#ifndef __ASSEMBLY__
/*
* The DMA mask corresponding to the maximum bus address allocatable
* using GFP_DMA. The default here places no restriction on DMA
* allocations. This must be the smallest DMA mask in the system,
* so a successful GFP_DMA allocation will always satisfy this.
*/
#ifndef ISA_DMA_THRESHOLD
#define ISA_DMA_THRESHOLD (0xffffffffULL)
#endif
#ifndef arch_adjust_zones
#define arch_adjust_zones(node,size,holes) do { } while (0)
#endif
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.
*
* This is the PFN of the first RAM page in the kernel
* direct-mapped view. We assume this is the first page
* of RAM in the mem_map as well.
*/
#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
/*
* These are *only* valid on the kernel direct mapped RAM memory.
* Note: Drivers should NOT use these. They are the wrong
* translation for translating DMA addresses. Use the driver
* DMA support - see dma-mapping.h.
*/
static inline unsigned long virt_to_phys(void *x)
{
return __virt_to_phys((unsigned long)(x));
}
static inline void *phys_to_virt(unsigned long x)
{
return (void *)(__phys_to_virt((unsigned long)(x)));
}
/*
* Drivers should NOT use these either.
*/
#define __pa(x) __virt_to_phys((unsigned long)(x))
#define __va(x) ((void *)__phys_to_virt((unsigned long)(x)))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
/*
* Virtual <-> DMA view memory address translations
* Again, these are *only* valid on the kernel direct mapped RAM
* memory. Use of these is *deprecated* (and that doesn't mean
* use the __ prefixed forms instead.) See dma-mapping.h.
*/
static inline __deprecated unsigned long virt_to_bus(void *x)
{
return __virt_to_bus((unsigned long)x);
}
static inline __deprecated void *bus_to_virt(unsigned long x)
{
return (void *)__bus_to_virt(x);
}
/*
* Conversion between a struct page and a physical address.
*
* Note: when converting an unknown physical address to a
* struct page, the resulting pointer must be validated
* using VALID_PAGE(). It must return an invalid struct page
* for any physical address not corresponding to a system
* RAM address.
*
* page_to_pfn(page) convert a struct page * to a PFN number
* pfn_to_page(pfn) convert a _valid_ PFN number to struct page *
* pfn_valid(pfn) indicates whether a PFN number is valid
*
* virt_to_page(k) convert a _valid_ virtual address to struct page *
* virt_addr_valid(k) indicates whether a virtual address is valid
*/
#ifndef CONFIG_DISCONTIGMEM
#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET
#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
#define PHYS_TO_NID(addr) (0)
#else /* CONFIG_DISCONTIGMEM */
/*
* This is more complex. We have a set of mem_map arrays spread
* around in memory.
*/
#include <linux/numa.h>
#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn)
#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
#define pfn_valid(pfn) \
({ \
unsigned int nid = PFN_TO_NID(pfn); \
int valid = nid < MAX_NUMNODES; \
if (valid) { \
pg_data_t *node = NODE_DATA(nid); \
valid = (pfn - node->node_start_pfn) < \
node->node_spanned_pages; \
} \
valid; \
})
#define virt_to_page(kaddr) \
(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
/*
* Common discontigmem stuff.
* PHYS_TO_NID is used by the ARM kernel/setup.c
*/
#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT)
#endif /* !CONFIG_DISCONTIGMEM */
/*
* For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die.
*/
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
/*
* Optional device DMA address remapping. Do _not_ use directly!
* We should really eliminate virt_to_bus() here - it's deprecated.
*/
#ifndef __arch_page_to_dma
#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))
#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr))
#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr)))
#else
#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page))
#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr))
#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr))
#endif
/*
* Optional coherency support. Currently used only by selected
* Intel XSC3-based systems.
*/
#ifndef arch_is_coherent
#define arch_is_coherent() 0
#endif
#endif
#include <asm-generic/memory_model.h>
#endif