619 lines
16 KiB
C
619 lines
16 KiB
C
#define PRISM2_PLX
|
|
|
|
/* Host AP driver's support for PC Cards on PCI adapters using PLX9052 is
|
|
* based on:
|
|
* - Host AP driver patch from james@madingley.org
|
|
* - linux-wlan-ng driver, Copyright (C) AbsoluteValue Systems, Inc.
|
|
*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/if.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/wireless.h>
|
|
#include <net/iw_handler.h>
|
|
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "hostap_wlan.h"
|
|
|
|
|
|
static char *dev_info = "hostap_plx";
|
|
|
|
|
|
MODULE_AUTHOR("Jouni Malinen");
|
|
MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
|
|
"cards (PLX).");
|
|
MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
static int ignore_cis;
|
|
module_param(ignore_cis, int, 0444);
|
|
MODULE_PARM_DESC(ignore_cis, "Do not verify manfid information in CIS");
|
|
|
|
|
|
/* struct local_info::hw_priv */
|
|
struct hostap_plx_priv {
|
|
void __iomem *attr_mem;
|
|
unsigned int cor_offset;
|
|
};
|
|
|
|
|
|
#define PLX_MIN_ATTR_LEN 512 /* at least 2 x 256 is needed for CIS */
|
|
#define COR_SRESET 0x80
|
|
#define COR_LEVLREQ 0x40
|
|
#define COR_ENABLE_FUNC 0x01
|
|
/* PCI Configuration Registers */
|
|
#define PLX_PCIIPR 0x3d /* PCI Interrupt Pin */
|
|
/* Local Configuration Registers */
|
|
#define PLX_INTCSR 0x4c /* Interrupt Control/Status Register */
|
|
#define PLX_INTCSR_PCI_INTEN BIT(6) /* PCI Interrupt Enable */
|
|
#define PLX_CNTRL 0x50
|
|
#define PLX_CNTRL_SERIAL_EEPROM_PRESENT BIT(28)
|
|
|
|
|
|
#define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID }
|
|
|
|
static const struct pci_device_id prism2_plx_id_table[] = {
|
|
PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"),
|
|
PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"),
|
|
PLXDEV(0x126c, 0x8030, "Nortel emobility"),
|
|
PLXDEV(0x1562, 0x0001, "Symbol LA-4123"),
|
|
PLXDEV(0x1385, 0x4100, "Netgear MA301"),
|
|
PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"),
|
|
PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"),
|
|
PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"),
|
|
PLXDEV(0x16ab, 0x1100, "Global Sun Tech GL24110P"),
|
|
PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"),
|
|
PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"),
|
|
PLXDEV(0x16ab, 0x1103, "Longshine 8031"),
|
|
PLXDEV(0x16ec, 0x3685, "US Robotics USR2415"),
|
|
PLXDEV(0xec80, 0xec00, "Belkin F5D6000"),
|
|
{ 0 }
|
|
};
|
|
|
|
|
|
/* Array of known Prism2/2.5 PC Card manufactured ids. If your card's manfid
|
|
* is not listed here, you will need to add it here to get the driver
|
|
* initialized. */
|
|
static struct prism2_plx_manfid {
|
|
u16 manfid1, manfid2;
|
|
} prism2_plx_known_manfids[] = {
|
|
{ 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */,
|
|
{ 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */,
|
|
{ 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */,
|
|
{ 0x0126, 0x8000 } /* Proxim RangeLAN */,
|
|
{ 0x0138, 0x0002 } /* Compaq WL100 */,
|
|
{ 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */,
|
|
{ 0x026f, 0x030b } /* Buffalo WLI-CF-S11G */,
|
|
{ 0x0274, 0x1612 } /* Linksys WPC11 Ver 2.5 */,
|
|
{ 0x0274, 0x1613 } /* Linksys WPC11 Ver 3 */,
|
|
{ 0x028a, 0x0002 } /* D-Link DRC-650 */,
|
|
{ 0x0250, 0x0002 } /* Samsung SWL2000-N */,
|
|
{ 0xc250, 0x0002 } /* EMTAC A2424i */,
|
|
{ 0xd601, 0x0002 } /* Z-Com XI300 */,
|
|
{ 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
|
|
{ 0, 0}
|
|
};
|
|
|
|
|
|
#ifdef PRISM2_IO_DEBUG
|
|
|
|
static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
|
|
outb(v, dev->base_addr + a);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
}
|
|
|
|
static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
u8 v;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
v = inb(dev->base_addr + a);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
return v;
|
|
}
|
|
|
|
static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
|
|
outw(v, dev->base_addr + a);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
}
|
|
|
|
static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
u16 v;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
v = inw(dev->base_addr + a);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
return v;
|
|
}
|
|
|
|
static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
|
|
u8 *buf, int wc)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
|
|
outsw(dev->base_addr + a, buf, wc);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
}
|
|
|
|
static inline void hfa384x_insw_debug(struct net_device *dev, int a,
|
|
u8 *buf, int wc)
|
|
{
|
|
struct hostap_interface *iface;
|
|
local_info_t *local;
|
|
unsigned long flags;
|
|
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
|
|
spin_lock_irqsave(&local->lock, flags);
|
|
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
|
|
insw(dev->base_addr + a, buf, wc);
|
|
spin_unlock_irqrestore(&local->lock, flags);
|
|
}
|
|
|
|
#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
|
|
#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
|
|
#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
|
|
#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
|
|
#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
|
|
#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
|
|
|
|
#else /* PRISM2_IO_DEBUG */
|
|
|
|
#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
|
|
#define HFA384X_INB(a) inb(dev->base_addr + (a))
|
|
#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
|
|
#define HFA384X_INW(a) inw(dev->base_addr + (a))
|
|
#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
|
|
#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
|
|
|
|
#endif /* PRISM2_IO_DEBUG */
|
|
|
|
|
|
static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
|
|
int len)
|
|
{
|
|
u16 d_off;
|
|
u16 *pos;
|
|
|
|
d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
|
|
pos = (u16 *) buf;
|
|
|
|
if (len / 2)
|
|
HFA384X_INSW(d_off, buf, len / 2);
|
|
pos += len / 2;
|
|
|
|
if (len & 1)
|
|
*((char *) pos) = HFA384X_INB(d_off);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
|
|
{
|
|
u16 d_off;
|
|
u16 *pos;
|
|
|
|
d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
|
|
pos = (u16 *) buf;
|
|
|
|
if (len / 2)
|
|
HFA384X_OUTSW(d_off, buf, len / 2);
|
|
pos += len / 2;
|
|
|
|
if (len & 1)
|
|
HFA384X_OUTB(*((char *) pos), d_off);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* FIX: This might change at some point.. */
|
|
#include "hostap_hw.c"
|
|
|
|
|
|
static void prism2_plx_cor_sreset(local_info_t *local)
|
|
{
|
|
unsigned char corsave;
|
|
struct hostap_plx_priv *hw_priv = local->hw_priv;
|
|
|
|
printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n",
|
|
dev_info);
|
|
|
|
/* Set sreset bit of COR and clear it after hold time */
|
|
|
|
if (hw_priv->attr_mem == NULL) {
|
|
/* TMD7160 - COR at card's first I/O addr */
|
|
corsave = inb(hw_priv->cor_offset);
|
|
outb(corsave | COR_SRESET, hw_priv->cor_offset);
|
|
mdelay(2);
|
|
outb(corsave & ~COR_SRESET, hw_priv->cor_offset);
|
|
mdelay(2);
|
|
} else {
|
|
/* PLX9052 */
|
|
corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset);
|
|
writeb(corsave | COR_SRESET,
|
|
hw_priv->attr_mem + hw_priv->cor_offset);
|
|
mdelay(2);
|
|
writeb(corsave & ~COR_SRESET,
|
|
hw_priv->attr_mem + hw_priv->cor_offset);
|
|
mdelay(2);
|
|
}
|
|
}
|
|
|
|
|
|
static void prism2_plx_genesis_reset(local_info_t *local, int hcr)
|
|
{
|
|
unsigned char corsave;
|
|
struct hostap_plx_priv *hw_priv = local->hw_priv;
|
|
|
|
if (hw_priv->attr_mem == NULL) {
|
|
/* TMD7160 - COR at card's first I/O addr */
|
|
corsave = inb(hw_priv->cor_offset);
|
|
outb(corsave | COR_SRESET, hw_priv->cor_offset);
|
|
mdelay(10);
|
|
outb(hcr, hw_priv->cor_offset + 2);
|
|
mdelay(10);
|
|
outb(corsave & ~COR_SRESET, hw_priv->cor_offset);
|
|
mdelay(10);
|
|
} else {
|
|
/* PLX9052 */
|
|
corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset);
|
|
writeb(corsave | COR_SRESET,
|
|
hw_priv->attr_mem + hw_priv->cor_offset);
|
|
mdelay(10);
|
|
writeb(hcr, hw_priv->attr_mem + hw_priv->cor_offset + 2);
|
|
mdelay(10);
|
|
writeb(corsave & ~COR_SRESET,
|
|
hw_priv->attr_mem + hw_priv->cor_offset);
|
|
mdelay(10);
|
|
}
|
|
}
|
|
|
|
|
|
static struct prism2_helper_functions prism2_plx_funcs =
|
|
{
|
|
.card_present = NULL,
|
|
.cor_sreset = prism2_plx_cor_sreset,
|
|
.genesis_reset = prism2_plx_genesis_reset,
|
|
.hw_type = HOSTAP_HW_PLX,
|
|
};
|
|
|
|
|
|
static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len,
|
|
unsigned int *cor_offset,
|
|
unsigned int *cor_index)
|
|
{
|
|
#define CISTPL_CONFIG 0x1A
|
|
#define CISTPL_MANFID 0x20
|
|
#define CISTPL_END 0xFF
|
|
#define CIS_MAX_LEN 256
|
|
u8 *cis;
|
|
int i, pos;
|
|
unsigned int rmsz, rasz, manfid1, manfid2;
|
|
struct prism2_plx_manfid *manfid;
|
|
|
|
cis = kmalloc(CIS_MAX_LEN, GFP_KERNEL);
|
|
if (cis == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* read CIS; it is in even offsets in the beginning of attr_mem */
|
|
for (i = 0; i < CIS_MAX_LEN; i++)
|
|
cis[i] = readb(attr_mem + 2 * i);
|
|
printk(KERN_DEBUG "%s: CIS: %02x %02x %02x %02x %02x %02x ...\n",
|
|
dev_info, cis[0], cis[1], cis[2], cis[3], cis[4], cis[5]);
|
|
|
|
/* set reasonable defaults for Prism2 cards just in case CIS parsing
|
|
* fails */
|
|
*cor_offset = 0x3e0;
|
|
*cor_index = 0x01;
|
|
manfid1 = manfid2 = 0;
|
|
|
|
pos = 0;
|
|
while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) {
|
|
if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN)
|
|
goto cis_error;
|
|
|
|
switch (cis[pos]) {
|
|
case CISTPL_CONFIG:
|
|
if (cis[pos + 1] < 2)
|
|
goto cis_error;
|
|
rmsz = (cis[pos + 2] & 0x3c) >> 2;
|
|
rasz = cis[pos + 2] & 0x03;
|
|
if (4 + rasz + rmsz > cis[pos + 1])
|
|
goto cis_error;
|
|
*cor_index = cis[pos + 3] & 0x3F;
|
|
*cor_offset = 0;
|
|
for (i = 0; i <= rasz; i++)
|
|
*cor_offset += cis[pos + 4 + i] << (8 * i);
|
|
printk(KERN_DEBUG "%s: cor_index=0x%x "
|
|
"cor_offset=0x%x\n", dev_info,
|
|
*cor_index, *cor_offset);
|
|
if (*cor_offset > attr_len) {
|
|
printk(KERN_ERR "%s: COR offset not within "
|
|
"attr_mem\n", dev_info);
|
|
kfree(cis);
|
|
return -1;
|
|
}
|
|
break;
|
|
|
|
case CISTPL_MANFID:
|
|
if (cis[pos + 1] < 4)
|
|
goto cis_error;
|
|
manfid1 = cis[pos + 2] + (cis[pos + 3] << 8);
|
|
manfid2 = cis[pos + 4] + (cis[pos + 5] << 8);
|
|
printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n",
|
|
dev_info, manfid1, manfid2);
|
|
break;
|
|
}
|
|
|
|
pos += cis[pos + 1] + 2;
|
|
}
|
|
|
|
if (pos >= CIS_MAX_LEN || cis[pos] != CISTPL_END)
|
|
goto cis_error;
|
|
|
|
for (manfid = prism2_plx_known_manfids; manfid->manfid1 != 0; manfid++)
|
|
if (manfid1 == manfid->manfid1 && manfid2 == manfid->manfid2) {
|
|
kfree(cis);
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is"
|
|
" not supported card\n", dev_info, manfid1, manfid2);
|
|
goto fail;
|
|
|
|
cis_error:
|
|
printk(KERN_WARNING "%s: invalid CIS data\n", dev_info);
|
|
|
|
fail:
|
|
kfree(cis);
|
|
if (ignore_cis) {
|
|
printk(KERN_INFO "%s: ignore_cis parameter set - ignoring "
|
|
"errors during CIS verification\n", dev_info);
|
|
return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
|
|
static int prism2_plx_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
unsigned int pccard_ioaddr, plx_ioaddr;
|
|
unsigned long pccard_attr_mem;
|
|
unsigned int pccard_attr_len;
|
|
void __iomem *attr_mem = NULL;
|
|
unsigned int cor_offset = 0, cor_index = 0;
|
|
u32 reg;
|
|
local_info_t *local = NULL;
|
|
struct net_device *dev = NULL;
|
|
struct hostap_interface *iface;
|
|
static int cards_found /* = 0 */;
|
|
int irq_registered = 0;
|
|
int tmd7160;
|
|
struct hostap_plx_priv *hw_priv;
|
|
|
|
hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
|
|
if (hw_priv == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (pci_enable_device(pdev))
|
|
goto err_out_free;
|
|
|
|
/* National Datacomm NCP130 based on TMD7160, not PLX9052. */
|
|
tmd7160 = (pdev->vendor == 0x15e8) && (pdev->device == 0x0131);
|
|
|
|
plx_ioaddr = pci_resource_start(pdev, 1);
|
|
pccard_ioaddr = pci_resource_start(pdev, tmd7160 ? 2 : 3);
|
|
|
|
if (tmd7160) {
|
|
/* TMD7160 */
|
|
attr_mem = NULL; /* no access to PC Card attribute memory */
|
|
|
|
printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, "
|
|
"irq=%d, pccard_io=0x%x\n",
|
|
plx_ioaddr, pdev->irq, pccard_ioaddr);
|
|
|
|
cor_offset = plx_ioaddr;
|
|
cor_index = 0x04;
|
|
|
|
outb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, plx_ioaddr);
|
|
mdelay(1);
|
|
reg = inb(plx_ioaddr);
|
|
if (reg != (cor_index | COR_LEVLREQ | COR_ENABLE_FUNC)) {
|
|
printk(KERN_ERR "%s: Error setting COR (expected="
|
|
"0x%02x, was=0x%02x)\n", dev_info,
|
|
cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, reg);
|
|
goto fail;
|
|
}
|
|
} else {
|
|
/* PLX9052 */
|
|
pccard_attr_mem = pci_resource_start(pdev, 2);
|
|
pccard_attr_len = pci_resource_len(pdev, 2);
|
|
if (pccard_attr_len < PLX_MIN_ATTR_LEN)
|
|
goto fail;
|
|
|
|
|
|
attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
|
|
if (attr_mem == NULL) {
|
|
printk(KERN_ERR "%s: cannot remap attr_mem\n",
|
|
dev_info);
|
|
goto fail;
|
|
}
|
|
|
|
printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: "
|
|
"mem=0x%lx, plx_io=0x%x, irq=%d, pccard_io=0x%x\n",
|
|
pccard_attr_mem, plx_ioaddr, pdev->irq, pccard_ioaddr);
|
|
|
|
if (prism2_plx_check_cis(attr_mem, pccard_attr_len,
|
|
&cor_offset, &cor_index)) {
|
|
printk(KERN_INFO "Unknown PC Card CIS - not a "
|
|
"Prism2/2.5 card?\n");
|
|
goto fail;
|
|
}
|
|
|
|
printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 "
|
|
"adapter\n");
|
|
|
|
/* Write COR to enable PC Card */
|
|
writeb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC,
|
|
attr_mem + cor_offset);
|
|
|
|
/* Enable PCI interrupts if they are not already enabled */
|
|
reg = inl(plx_ioaddr + PLX_INTCSR);
|
|
printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg);
|
|
if (!(reg & PLX_INTCSR_PCI_INTEN)) {
|
|
outl(reg | PLX_INTCSR_PCI_INTEN,
|
|
plx_ioaddr + PLX_INTCSR);
|
|
if (!(inl(plx_ioaddr + PLX_INTCSR) &
|
|
PLX_INTCSR_PCI_INTEN)) {
|
|
printk(KERN_WARNING "%s: Could not enable "
|
|
"Local Interrupts\n", dev_info);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
reg = inl(plx_ioaddr + PLX_CNTRL);
|
|
printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM "
|
|
"present=%d)\n",
|
|
reg, (reg & PLX_CNTRL_SERIAL_EEPROM_PRESENT) != 0);
|
|
/* should set PLX_PCIIPR to 0x01 (INTA#) if Serial EEPROM is
|
|
* not present; but are there really such cards in use(?) */
|
|
}
|
|
|
|
dev = prism2_init_local_data(&prism2_plx_funcs, cards_found,
|
|
&pdev->dev);
|
|
if (dev == NULL)
|
|
goto fail;
|
|
iface = netdev_priv(dev);
|
|
local = iface->local;
|
|
local->hw_priv = hw_priv;
|
|
cards_found++;
|
|
|
|
dev->irq = pdev->irq;
|
|
dev->base_addr = pccard_ioaddr;
|
|
hw_priv->attr_mem = attr_mem;
|
|
hw_priv->cor_offset = cor_offset;
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
|
|
dev)) {
|
|
printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
|
|
goto fail;
|
|
} else
|
|
irq_registered = 1;
|
|
|
|
if (prism2_hw_config(dev, 1)) {
|
|
printk(KERN_DEBUG "%s: hardware initialization failed\n",
|
|
dev_info);
|
|
goto fail;
|
|
}
|
|
|
|
return hostap_hw_ready(dev);
|
|
|
|
fail:
|
|
if (irq_registered && dev)
|
|
free_irq(dev->irq, dev);
|
|
|
|
if (attr_mem)
|
|
iounmap(attr_mem);
|
|
|
|
pci_disable_device(pdev);
|
|
prism2_free_local_data(dev);
|
|
|
|
err_out_free:
|
|
kfree(hw_priv);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
|
|
static void prism2_plx_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev;
|
|
struct hostap_interface *iface;
|
|
struct hostap_plx_priv *hw_priv;
|
|
|
|
dev = pci_get_drvdata(pdev);
|
|
iface = netdev_priv(dev);
|
|
hw_priv = iface->local->hw_priv;
|
|
|
|
/* Reset the hardware, and ensure interrupts are disabled. */
|
|
prism2_plx_cor_sreset(iface->local);
|
|
hfa384x_disable_interrupts(dev);
|
|
|
|
if (hw_priv->attr_mem)
|
|
iounmap(hw_priv->attr_mem);
|
|
if (dev->irq)
|
|
free_irq(dev->irq, dev);
|
|
|
|
prism2_free_local_data(dev);
|
|
kfree(hw_priv);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, prism2_plx_id_table);
|
|
|
|
static struct pci_driver prism2_plx_driver = {
|
|
.name = "hostap_plx",
|
|
.id_table = prism2_plx_id_table,
|
|
.probe = prism2_plx_probe,
|
|
.remove = prism2_plx_remove,
|
|
};
|
|
|
|
module_pci_driver(prism2_plx_driver);
|