linux_old1/drivers/clk/ti/clk.c

520 lines
12 KiB
C

/*
* TI clock support
*
* Copyright (C) 2013 Texas Instruments, Inc.
*
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/list.h>
#include <linux/regmap.h>
#include <linux/memblock.h>
#include <linux/device.h>
#include "clock.h"
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
struct ti_clk_features ti_clk_features;
struct clk_iomap {
struct regmap *regmap;
void __iomem *mem;
};
static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
static void clk_memmap_writel(u32 val, const struct clk_omap_reg *reg)
{
struct clk_iomap *io = clk_memmaps[reg->index];
if (reg->ptr)
writel_relaxed(val, reg->ptr);
else if (io->regmap)
regmap_write(io->regmap, reg->offset, val);
else
writel_relaxed(val, io->mem + reg->offset);
}
static void _clk_rmw(u32 val, u32 mask, void __iomem *ptr)
{
u32 v;
v = readl_relaxed(ptr);
v &= ~mask;
v |= val;
writel_relaxed(v, ptr);
}
static void clk_memmap_rmw(u32 val, u32 mask, const struct clk_omap_reg *reg)
{
struct clk_iomap *io = clk_memmaps[reg->index];
if (reg->ptr) {
_clk_rmw(val, mask, reg->ptr);
} else if (io->regmap) {
regmap_update_bits(io->regmap, reg->offset, mask, val);
} else {
_clk_rmw(val, mask, io->mem + reg->offset);
}
}
static u32 clk_memmap_readl(const struct clk_omap_reg *reg)
{
u32 val;
struct clk_iomap *io = clk_memmaps[reg->index];
if (reg->ptr)
val = readl_relaxed(reg->ptr);
else if (io->regmap)
regmap_read(io->regmap, reg->offset, &val);
else
val = readl_relaxed(io->mem + reg->offset);
return val;
}
/**
* ti_clk_setup_ll_ops - setup low level clock operations
* @ops: low level clock ops descriptor
*
* Sets up low level clock operations for TI clock driver. This is used
* to provide various callbacks for the clock driver towards platform
* specific code. Returns 0 on success, -EBUSY if ll_ops have been
* registered already.
*/
int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
{
if (ti_clk_ll_ops) {
pr_err("Attempt to register ll_ops multiple times.\n");
return -EBUSY;
}
ti_clk_ll_ops = ops;
ops->clk_readl = clk_memmap_readl;
ops->clk_writel = clk_memmap_writel;
ops->clk_rmw = clk_memmap_rmw;
return 0;
}
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
*
* Register alias or non-standard DT clock entries during boot. By
* default, DT clocks are found based on their node name. If any
* additional con-id / dev-id -> clock mapping is required, use this
* function to list these.
*/
void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
{
struct ti_dt_clk *c;
struct device_node *node, *parent;
struct clk *clk;
struct of_phandle_args clkspec;
char buf[64];
char *ptr;
char *tags[2];
int i;
int num_args;
int ret;
static bool clkctrl_nodes_missing;
static bool has_clkctrl_data;
static bool compat_mode;
compat_mode = ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT;
for (c = oclks; c->node_name != NULL; c++) {
strcpy(buf, c->node_name);
ptr = buf;
for (i = 0; i < 2; i++)
tags[i] = NULL;
num_args = 0;
while (*ptr) {
if (*ptr == ':') {
if (num_args >= 2) {
pr_warn("Bad number of tags on %s\n",
c->node_name);
return;
}
tags[num_args++] = ptr + 1;
*ptr = 0;
}
ptr++;
}
if (num_args && clkctrl_nodes_missing)
continue;
node = of_find_node_by_name(NULL, buf);
if (num_args && compat_mode) {
parent = node;
node = of_get_child_by_name(parent, "clk");
of_node_put(parent);
}
clkspec.np = node;
clkspec.args_count = num_args;
for (i = 0; i < num_args; i++) {
ret = kstrtoint(tags[i], i ? 10 : 16, clkspec.args + i);
if (ret) {
pr_warn("Bad tag in %s at %d: %s\n",
c->node_name, i, tags[i]);
of_node_put(node);
return;
}
}
clk = of_clk_get_from_provider(&clkspec);
of_node_put(node);
if (!IS_ERR(clk)) {
c->lk.clk = clk;
clkdev_add(&c->lk);
} else {
if (num_args && !has_clkctrl_data) {
if (of_find_compatible_node(NULL, NULL,
"ti,clkctrl")) {
has_clkctrl_data = true;
} else {
clkctrl_nodes_missing = true;
pr_warn("missing clkctrl nodes, please update your dts.\n");
continue;
}
}
pr_warn("failed to lookup clock node %s, ret=%ld\n",
c->node_name, PTR_ERR(clk));
}
}
}
struct clk_init_item {
struct device_node *node;
void *user;
ti_of_clk_init_cb_t func;
struct list_head link;
};
static LIST_HEAD(retry_list);
/**
* ti_clk_retry_init - retries a failed clock init at later phase
* @node: device not for the clock
* @user: user data pointer
* @func: init function to be called for the clock
*
* Adds a failed clock init to the retry list. The retry list is parsed
* once all the other clocks have been initialized.
*/
int __init ti_clk_retry_init(struct device_node *node, void *user,
ti_of_clk_init_cb_t func)
{
struct clk_init_item *retry;
pr_debug("%pOFn: adding to retry list...\n", node);
retry = kzalloc(sizeof(*retry), GFP_KERNEL);
if (!retry)
return -ENOMEM;
retry->node = node;
retry->func = func;
retry->user = user;
list_add(&retry->link, &retry_list);
return 0;
}
/**
* ti_clk_get_reg_addr - get register address for a clock register
* @node: device node for the clock
* @index: register index from the clock node
* @reg: pointer to target register struct
*
* Builds clock register address from device tree information, and returns
* the data via the provided output pointer @reg. Returns 0 on success,
* negative error value on failure.
*/
int ti_clk_get_reg_addr(struct device_node *node, int index,
struct clk_omap_reg *reg)
{
u32 val;
int i;
for (i = 0; i < CLK_MAX_MEMMAPS; i++) {
if (clocks_node_ptr[i] == node->parent)
break;
}
if (i == CLK_MAX_MEMMAPS) {
pr_err("clk-provider not found for %pOFn!\n", node);
return -ENOENT;
}
reg->index = i;
if (of_property_read_u32_index(node, "reg", index, &val)) {
pr_err("%pOFn must have reg[%d]!\n", node, index);
return -EINVAL;
}
reg->offset = val;
reg->ptr = NULL;
return 0;
}
void ti_clk_latch(struct clk_omap_reg *reg, s8 shift)
{
u32 latch;
if (shift < 0)
return;
latch = 1 << shift;
ti_clk_ll_ops->clk_rmw(latch, latch, reg);
ti_clk_ll_ops->clk_rmw(0, latch, reg);
ti_clk_ll_ops->clk_readl(reg); /* OCP barrier */
}
/**
* omap2_clk_provider_init - init master clock provider
* @parent: master node
* @index: internal index for clk_reg_ops
* @syscon: syscon regmap pointer for accessing clock registers
* @mem: iomem pointer for the clock provider memory area, only used if
* syscon is not provided
*
* Initializes a master clock IP block. This basically sets up the
* mapping from clocks node to the memory map index. All the clocks
* are then initialized through the common of_clk_init call, and the
* clocks will access their memory maps based on the node layout.
* Returns 0 in success.
*/
int __init omap2_clk_provider_init(struct device_node *parent, int index,
struct regmap *syscon, void __iomem *mem)
{
struct device_node *clocks;
struct clk_iomap *io;
/* get clocks for this parent */
clocks = of_get_child_by_name(parent, "clocks");
if (!clocks) {
pr_err("%pOFn missing 'clocks' child node.\n", parent);
return -EINVAL;
}
/* add clocks node info */
clocks_node_ptr[index] = clocks;
io = kzalloc(sizeof(*io), GFP_KERNEL);
if (!io)
return -ENOMEM;
io->regmap = syscon;
io->mem = mem;
clk_memmaps[index] = io;
return 0;
}
/**
* omap2_clk_legacy_provider_init - initialize a legacy clock provider
* @index: index for the clock provider
* @mem: iomem pointer for the clock provider memory area
*
* Initializes a legacy clock provider memory mapping.
*/
void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
{
struct clk_iomap *io;
io = memblock_alloc(sizeof(*io), SMP_CACHE_BYTES);
io->mem = mem;
clk_memmaps[index] = io;
}
/**
* ti_dt_clk_init_retry_clks - init clocks from the retry list
*
* Initializes any clocks that have failed to initialize before,
* reasons being missing parent node(s) during earlier init. This
* typically happens only for DPLLs which need to have both of their
* parent clocks ready during init.
*/
void ti_dt_clk_init_retry_clks(void)
{
struct clk_init_item *retry;
struct clk_init_item *tmp;
int retries = 5;
while (!list_empty(&retry_list) && retries) {
list_for_each_entry_safe(retry, tmp, &retry_list, link) {
pr_debug("retry-init: %pOFn\n", retry->node);
retry->func(retry->user, retry->node);
list_del(&retry->link);
kfree(retry);
}
retries--;
}
}
static const struct of_device_id simple_clk_match_table[] __initconst = {
{ .compatible = "fixed-clock" },
{ .compatible = "fixed-factor-clock" },
{ }
};
/**
* ti_clk_add_aliases - setup clock aliases
*
* Sets up any missing clock aliases. No return value.
*/
void __init ti_clk_add_aliases(void)
{
struct device_node *np;
struct clk *clk;
for_each_matching_node(np, simple_clk_match_table) {
struct of_phandle_args clkspec;
clkspec.np = np;
clk = of_clk_get_from_provider(&clkspec);
ti_clk_add_alias(NULL, clk, np->name);
}
}
/**
* ti_clk_setup_features - setup clock features flags
* @features: features definition to use
*
* Initializes the clock driver features flags based on platform
* provided data. No return value.
*/
void __init ti_clk_setup_features(struct ti_clk_features *features)
{
memcpy(&ti_clk_features, features, sizeof(*features));
}
/**
* ti_clk_get_features - get clock driver features flags
*
* Get TI clock driver features description. Returns a pointer
* to the current feature setup.
*/
const struct ti_clk_features *ti_clk_get_features(void)
{
return &ti_clk_features;
}
/**
* omap2_clk_enable_init_clocks - prepare & enable a list of clocks
* @clk_names: ptr to an array of strings of clock names to enable
* @num_clocks: number of clock names in @clk_names
*
* Prepare and enable a list of clocks, named by @clk_names. No
* return value. XXX Deprecated; only needed until these clocks are
* properly claimed and enabled by the drivers or core code that uses
* them. XXX What code disables & calls clk_put on these clocks?
*/
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
{
struct clk *init_clk;
int i;
for (i = 0; i < num_clocks; i++) {
init_clk = clk_get(NULL, clk_names[i]);
if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
clk_names[i]))
continue;
clk_prepare_enable(init_clk);
}
}
/**
* ti_clk_add_alias - add a clock alias for a TI clock
* @dev: device alias for this clock
* @clk: clock handle to create alias for
* @con: connection ID for this clock
*
* Creates a clock alias for a TI clock. Allocates the clock lookup entry
* and assigns the data to it. Returns 0 if successful, negative error
* value otherwise.
*/
int ti_clk_add_alias(struct device *dev, struct clk *clk, const char *con)
{
struct clk_lookup *cl;
if (!clk)
return 0;
if (IS_ERR(clk))
return PTR_ERR(clk);
cl = kzalloc(sizeof(*cl), GFP_KERNEL);
if (!cl)
return -ENOMEM;
if (dev)
cl->dev_id = dev_name(dev);
cl->con_id = con;
cl->clk = clk;
clkdev_add(cl);
return 0;
}
/**
* ti_clk_register - register a TI clock to the common clock framework
* @dev: device for this clock
* @hw: hardware clock handle
* @con: connection ID for this clock
*
* Registers a TI clock to the common clock framework, and adds a clock
* alias for it. Returns a handle to the registered clock if successful,
* ERR_PTR value in failure.
*/
struct clk *ti_clk_register(struct device *dev, struct clk_hw *hw,
const char *con)
{
struct clk *clk;
int ret;
clk = clk_register(dev, hw);
if (IS_ERR(clk))
return clk;
ret = ti_clk_add_alias(dev, clk, con);
if (ret) {
clk_unregister(clk);
return ERR_PTR(ret);
}
return clk;
}