456 lines
12 KiB
C
456 lines
12 KiB
C
/*
|
|
* eisa.c - provide support for EISA adapters in PA-RISC machines
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Copyright (c) 2001 Matthew Wilcox for Hewlett Packard
|
|
* Copyright (c) 2001 Daniel Engstrom <5116@telia.com>
|
|
*
|
|
* There are two distinct EISA adapters. Mongoose is found in machines
|
|
* before the 712; then the Wax ASIC is used. To complicate matters, the
|
|
* Wax ASIC also includes a PS/2 and RS-232 controller, but those are
|
|
* dealt with elsewhere; this file is concerned only with the EISA portions
|
|
* of Wax.
|
|
*
|
|
*
|
|
* HINT:
|
|
* -----
|
|
* To allow an ISA card to work properly in the EISA slot you need to
|
|
* set an edge trigger level. This may be done on the palo command line
|
|
* by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with
|
|
* n and n2 as the irq levels you want to use.
|
|
*
|
|
* Example: "eisa_irq_edge=10,11" allows ISA cards to operate at
|
|
* irq levels 10 and 11.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/eisa.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/parisc-device.h>
|
|
#include <asm/delay.h>
|
|
#include <asm/eisa_bus.h>
|
|
#include <asm/eisa_eeprom.h>
|
|
|
|
#if 0
|
|
#define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg )
|
|
#else
|
|
#define EISA_DBG(msg, arg... )
|
|
#endif
|
|
|
|
#define SNAKES_EEPROM_BASE_ADDR 0xF0810400
|
|
#define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400
|
|
|
|
static DEFINE_SPINLOCK(eisa_irq_lock);
|
|
|
|
void __iomem *eisa_eeprom_addr __read_mostly;
|
|
|
|
/* We can only have one EISA adapter in the system because neither
|
|
* implementation can be flexed.
|
|
*/
|
|
static struct eisa_ba {
|
|
struct pci_hba_data hba;
|
|
unsigned long eeprom_addr;
|
|
struct eisa_root_device root;
|
|
} eisa_dev;
|
|
|
|
/* Port ops */
|
|
|
|
static inline unsigned long eisa_permute(unsigned short port)
|
|
{
|
|
if (port & 0x300) {
|
|
return 0xfc000000 | ((port & 0xfc00) >> 6)
|
|
| ((port & 0x3f8) << 9) | (port & 7);
|
|
} else {
|
|
return 0xfc000000 | port;
|
|
}
|
|
}
|
|
|
|
unsigned char eisa_in8(unsigned short port)
|
|
{
|
|
if (EISA_bus)
|
|
return gsc_readb(eisa_permute(port));
|
|
return 0xff;
|
|
}
|
|
|
|
unsigned short eisa_in16(unsigned short port)
|
|
{
|
|
if (EISA_bus)
|
|
return le16_to_cpu(gsc_readw(eisa_permute(port)));
|
|
return 0xffff;
|
|
}
|
|
|
|
unsigned int eisa_in32(unsigned short port)
|
|
{
|
|
if (EISA_bus)
|
|
return le32_to_cpu(gsc_readl(eisa_permute(port)));
|
|
return 0xffffffff;
|
|
}
|
|
|
|
void eisa_out8(unsigned char data, unsigned short port)
|
|
{
|
|
if (EISA_bus)
|
|
gsc_writeb(data, eisa_permute(port));
|
|
}
|
|
|
|
void eisa_out16(unsigned short data, unsigned short port)
|
|
{
|
|
if (EISA_bus)
|
|
gsc_writew(cpu_to_le16(data), eisa_permute(port));
|
|
}
|
|
|
|
void eisa_out32(unsigned int data, unsigned short port)
|
|
{
|
|
if (EISA_bus)
|
|
gsc_writel(cpu_to_le32(data), eisa_permute(port));
|
|
}
|
|
|
|
#ifndef CONFIG_PCI
|
|
/* We call these directly without PCI. See asm/io.h. */
|
|
EXPORT_SYMBOL(eisa_in8);
|
|
EXPORT_SYMBOL(eisa_in16);
|
|
EXPORT_SYMBOL(eisa_in32);
|
|
EXPORT_SYMBOL(eisa_out8);
|
|
EXPORT_SYMBOL(eisa_out16);
|
|
EXPORT_SYMBOL(eisa_out32);
|
|
#endif
|
|
|
|
/* Interrupt handling */
|
|
|
|
/* cached interrupt mask registers */
|
|
static int master_mask;
|
|
static int slave_mask;
|
|
|
|
/* the trig level can be set with the
|
|
* eisa_irq_edge=n,n,n commandline parameter
|
|
* We should really read this from the EEPROM
|
|
* in the furure.
|
|
*/
|
|
/* irq 13,8,2,1,0 must be edge */
|
|
static unsigned int eisa_irq_level __read_mostly; /* default to edge triggered */
|
|
|
|
|
|
/* called by free irq */
|
|
static void eisa_mask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
unsigned long flags;
|
|
|
|
EISA_DBG("disable irq %d\n", irq);
|
|
/* just mask for now */
|
|
spin_lock_irqsave(&eisa_irq_lock, flags);
|
|
if (irq & 8) {
|
|
slave_mask |= (1 << (irq&7));
|
|
eisa_out8(slave_mask, 0xa1);
|
|
} else {
|
|
master_mask |= (1 << (irq&7));
|
|
eisa_out8(master_mask, 0x21);
|
|
}
|
|
spin_unlock_irqrestore(&eisa_irq_lock, flags);
|
|
EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
|
|
EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
|
|
}
|
|
|
|
/* called by request irq */
|
|
static void eisa_unmask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
unsigned long flags;
|
|
EISA_DBG("enable irq %d\n", irq);
|
|
|
|
spin_lock_irqsave(&eisa_irq_lock, flags);
|
|
if (irq & 8) {
|
|
slave_mask &= ~(1 << (irq&7));
|
|
eisa_out8(slave_mask, 0xa1);
|
|
} else {
|
|
master_mask &= ~(1 << (irq&7));
|
|
eisa_out8(master_mask, 0x21);
|
|
}
|
|
spin_unlock_irqrestore(&eisa_irq_lock, flags);
|
|
EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
|
|
EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
|
|
}
|
|
|
|
static struct irq_chip eisa_interrupt_type = {
|
|
.name = "EISA",
|
|
.irq_unmask = eisa_unmask_irq,
|
|
.irq_mask = eisa_mask_irq,
|
|
};
|
|
|
|
static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
|
|
{
|
|
int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&eisa_irq_lock, flags);
|
|
/* read IRR command */
|
|
eisa_out8(0x0a, 0x20);
|
|
eisa_out8(0x0a, 0xa0);
|
|
|
|
EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n",
|
|
irq, eisa_in8(0x20), eisa_in8(0xa0));
|
|
|
|
/* read ISR command */
|
|
eisa_out8(0x0a, 0x20);
|
|
eisa_out8(0x0a, 0xa0);
|
|
EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n",
|
|
eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1));
|
|
|
|
irq &= 0xf;
|
|
|
|
/* mask irq and write eoi */
|
|
if (irq & 8) {
|
|
slave_mask |= (1 << (irq&7));
|
|
eisa_out8(slave_mask, 0xa1);
|
|
eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */
|
|
eisa_out8(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */
|
|
|
|
} else {
|
|
master_mask |= (1 << (irq&7));
|
|
eisa_out8(master_mask, 0x21);
|
|
eisa_out8(0x60|irq,0x20); /* 'Specific EOI' to master */
|
|
}
|
|
spin_unlock_irqrestore(&eisa_irq_lock, flags);
|
|
|
|
generic_handle_irq(irq);
|
|
|
|
spin_lock_irqsave(&eisa_irq_lock, flags);
|
|
/* unmask */
|
|
if (irq & 8) {
|
|
slave_mask &= ~(1 << (irq&7));
|
|
eisa_out8(slave_mask, 0xa1);
|
|
} else {
|
|
master_mask &= ~(1 << (irq&7));
|
|
eisa_out8(master_mask, 0x21);
|
|
}
|
|
spin_unlock_irqrestore(&eisa_irq_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t dummy_irq2_handler(int _, void *dev)
|
|
{
|
|
printk(KERN_ALERT "eisa: uhh, irq2?\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction irq2_action = {
|
|
.handler = dummy_irq2_handler,
|
|
.name = "cascade",
|
|
};
|
|
|
|
static void init_eisa_pic(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&eisa_irq_lock, flags);
|
|
|
|
eisa_out8(0xff, 0x21); /* mask during init */
|
|
eisa_out8(0xff, 0xa1); /* mask during init */
|
|
|
|
/* master pic */
|
|
eisa_out8(0x11,0x20); /* ICW1 */
|
|
eisa_out8(0x00,0x21); /* ICW2 */
|
|
eisa_out8(0x04,0x21); /* ICW3 */
|
|
eisa_out8(0x01,0x21); /* ICW4 */
|
|
eisa_out8(0x40,0x20); /* OCW2 */
|
|
|
|
/* slave pic */
|
|
eisa_out8(0x11,0xa0); /* ICW1 */
|
|
eisa_out8(0x08,0xa1); /* ICW2 */
|
|
eisa_out8(0x02,0xa1); /* ICW3 */
|
|
eisa_out8(0x01,0xa1); /* ICW4 */
|
|
eisa_out8(0x40,0xa0); /* OCW2 */
|
|
|
|
udelay(100);
|
|
|
|
slave_mask = 0xff;
|
|
master_mask = 0xfb;
|
|
eisa_out8(slave_mask, 0xa1); /* OCW1 */
|
|
eisa_out8(master_mask, 0x21); /* OCW1 */
|
|
|
|
/* setup trig level */
|
|
EISA_DBG("EISA edge/level %04x\n", eisa_irq_level);
|
|
|
|
eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge */
|
|
eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1);
|
|
|
|
EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
|
|
EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
|
|
EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0));
|
|
EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1));
|
|
|
|
spin_unlock_irqrestore(&eisa_irq_lock, flags);
|
|
}
|
|
|
|
/* Device initialisation */
|
|
|
|
#define is_mongoose(dev) (dev->id.sversion == 0x00076)
|
|
|
|
static int __init eisa_probe(struct parisc_device *dev)
|
|
{
|
|
int i, result;
|
|
|
|
char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
|
|
|
|
printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
|
|
name, (unsigned long)dev->hpa.start);
|
|
|
|
eisa_dev.hba.dev = dev;
|
|
eisa_dev.hba.iommu = ccio_get_iommu(dev);
|
|
|
|
eisa_dev.hba.lmmio_space.name = "EISA";
|
|
eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000);
|
|
eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff);
|
|
eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM;
|
|
result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space);
|
|
if (result < 0) {
|
|
printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
|
|
return result;
|
|
}
|
|
eisa_dev.hba.io_space.name = "EISA";
|
|
eisa_dev.hba.io_space.start = 0;
|
|
eisa_dev.hba.io_space.end = 0xffff;
|
|
eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO;
|
|
result = request_resource(&ioport_resource, &eisa_dev.hba.io_space);
|
|
if (result < 0) {
|
|
printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
|
|
return result;
|
|
}
|
|
pcibios_register_hba(&eisa_dev.hba);
|
|
|
|
result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev);
|
|
if (result) {
|
|
printk(KERN_ERR "EISA: request_irq failed!\n");
|
|
return result;
|
|
}
|
|
|
|
/* Reserve IRQ2 */
|
|
setup_irq(2, &irq2_action);
|
|
for (i = 0; i < 16; i++) {
|
|
irq_set_chip_and_handler(i, &eisa_interrupt_type,
|
|
handle_simple_irq);
|
|
}
|
|
|
|
EISA_bus = 1;
|
|
|
|
if (dev->num_addrs) {
|
|
/* newer firmware hand out the eeprom address */
|
|
eisa_dev.eeprom_addr = dev->addr[0];
|
|
} else {
|
|
/* old firmware, need to figure out the box */
|
|
if (is_mongoose(dev)) {
|
|
eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR;
|
|
} else {
|
|
eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
|
|
}
|
|
}
|
|
eisa_eeprom_addr = ioremap_nocache(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
|
|
result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
|
|
&eisa_dev.hba.lmmio_space);
|
|
init_eisa_pic();
|
|
|
|
if (result >= 0) {
|
|
/* FIXME : Don't enumerate the bus twice. */
|
|
eisa_dev.root.dev = &dev->dev;
|
|
dev_set_drvdata(&dev->dev, &eisa_dev.root);
|
|
eisa_dev.root.bus_base_addr = 0;
|
|
eisa_dev.root.res = &eisa_dev.hba.io_space;
|
|
eisa_dev.root.slots = result;
|
|
eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
|
|
if (eisa_root_register (&eisa_dev.root)) {
|
|
printk(KERN_ERR "EISA: Failed to register EISA root\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct parisc_device_id eisa_tbl[] = {
|
|
{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */
|
|
{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(parisc, eisa_tbl);
|
|
|
|
static struct parisc_driver eisa_driver = {
|
|
.name = "eisa_ba",
|
|
.id_table = eisa_tbl,
|
|
.probe = eisa_probe,
|
|
};
|
|
|
|
void __init eisa_init(void)
|
|
{
|
|
register_parisc_driver(&eisa_driver);
|
|
}
|
|
|
|
|
|
static unsigned int eisa_irq_configured;
|
|
void eisa_make_irq_level(int num)
|
|
{
|
|
if (eisa_irq_configured& (1<<num)) {
|
|
printk(KERN_WARNING
|
|
"IRQ %d polarity configured twice (last to level)\n",
|
|
num);
|
|
}
|
|
eisa_irq_level |= (1<<num); /* set the corresponding bit */
|
|
eisa_irq_configured |= (1<<num); /* set the corresponding bit */
|
|
}
|
|
|
|
void eisa_make_irq_edge(int num)
|
|
{
|
|
if (eisa_irq_configured& (1<<num)) {
|
|
printk(KERN_WARNING
|
|
"IRQ %d polarity configured twice (last to edge)\n",
|
|
num);
|
|
}
|
|
eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */
|
|
eisa_irq_configured |= (1<<num); /* set the corresponding bit */
|
|
}
|
|
|
|
static int __init eisa_irq_setup(char *str)
|
|
{
|
|
char *cur = str;
|
|
int val;
|
|
|
|
EISA_DBG("IRQ setup\n");
|
|
while (cur != NULL) {
|
|
char *pe;
|
|
|
|
val = (int) simple_strtoul(cur, &pe, 0);
|
|
if (val > 15 || val < 0) {
|
|
printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
|
|
continue;
|
|
}
|
|
if (val == 2) {
|
|
val = 9;
|
|
}
|
|
eisa_make_irq_edge(val); /* clear the corresponding bit */
|
|
EISA_DBG("setting IRQ %d to edge-triggered mode\n", val);
|
|
|
|
if ((cur = strchr(cur, ','))) {
|
|
cur++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
__setup("eisa_irq_edge=", eisa_irq_setup);
|
|
|