linux_old1/arch/arc/include/asm/cache.h

131 lines
3.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*/
#ifndef __ARC_ASM_CACHE_H
#define __ARC_ASM_CACHE_H
/* In case $$ not config, setup a dummy number for rest of kernel */
#ifndef CONFIG_ARC_CACHE_LINE_SHIFT
#define L1_CACHE_SHIFT 6
#else
#define L1_CACHE_SHIFT CONFIG_ARC_CACHE_LINE_SHIFT
#endif
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1))
/*
* ARC700 doesn't cache any access in top 1G (0xc000_0000 to 0xFFFF_FFFF)
* Ideal for wiring memory mapped peripherals as we don't need to do
* explicit uncached accesses (LD.di/ST.di) hence more portable drivers
*/
#define ARC_UNCACHED_ADDR_SPACE 0xc0000000
#ifndef __ASSEMBLY__
/* Uncached access macros */
#define arc_read_uncached_32(ptr) \
({ \
unsigned int __ret; \
__asm__ __volatile__( \
" ld.di %0, [%1] \n" \
: "=r"(__ret) \
: "r"(ptr)); \
__ret; \
})
#define arc_write_uncached_32(ptr, data)\
({ \
__asm__ __volatile__( \
" st.di %0, [%1] \n" \
: \
: "r"(data), "r"(ptr)); \
})
/* Largest line length for either L1 or L2 is 128 bytes */
#define SMP_CACHE_BYTES 128
#define cache_line_size() SMP_CACHE_BYTES
#define ARCH_DMA_MINALIGN SMP_CACHE_BYTES
/*
* Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses
* ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit
* alignment for any atomic64_t embedded in buffer.
* Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed
* value of 4 (and not 8) in ARC ABI.
*/
#if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC)
#define ARCH_SLAB_MINALIGN 8
#endif
extern void arc_cache_init(void);
extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
extern void read_decode_cache_bcr(void);
extern int ioc_enable;
extern unsigned long perip_base, perip_end;
#endif /* !__ASSEMBLY__ */
/* Instruction cache related Auxiliary registers */
#define ARC_REG_IC_BCR 0x77 /* Build Config reg */
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
#define ARC_REG_IC_IVIR 0x16
#define ARC_REG_IC_ENDR 0x17
#define ARC_REG_IC_IVIL 0x19
#define ARC_REG_IC_PTAG 0x1E
#define ARC_REG_IC_PTAG_HI 0x1F
/* Bit val in IC_CTRL */
#define IC_CTRL_DIS 0x1
/* Data cache related Auxiliary registers */
#define ARC_REG_DC_BCR 0x72 /* Build Config reg */
#define ARC_REG_DC_IVDC 0x47
#define ARC_REG_DC_CTRL 0x48
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#define ARC_REG_DC_STARTR 0x4D
#define ARC_REG_DC_ENDR 0x4E
#define ARC_REG_DC_PTAG 0x5C
#define ARC_REG_DC_PTAG_HI 0x5F
/* Bit val in DC_CTRL */
#define DC_CTRL_DIS 0x001
#define DC_CTRL_INV_MODE_FLUSH 0x040
#define DC_CTRL_FLUSH_STATUS 0x100
#define DC_CTRL_RGN_OP_INV 0x200
#define DC_CTRL_RGN_OP_MSK 0x200
/*System-level cache (L2 cache) related Auxiliary registers */
#define ARC_REG_SLC_CFG 0x901
#define ARC_REG_SLC_CTRL 0x903
#define ARC_REG_SLC_FLUSH 0x904
#define ARC_REG_SLC_INVALIDATE 0x905
#define ARC_AUX_SLC_IVDL 0x910
#define ARC_AUX_SLC_FLDL 0x912
#define ARC_REG_SLC_RGN_START 0x914
#define ARC_REG_SLC_RGN_START1 0x915
#define ARC_REG_SLC_RGN_END 0x916
#define ARC_REG_SLC_RGN_END1 0x917
/* Bit val in SLC_CONTROL */
#define SLC_CTRL_DIS 0x001
#define SLC_CTRL_IM 0x040
#define SLC_CTRL_BUSY 0x100
#define SLC_CTRL_RGN_OP_INV 0x200
/* IO coherency related Auxiliary registers */
#define ARC_REG_IO_COH_ENABLE 0x500
#define ARC_IO_COH_ENABLE_BIT BIT(0)
#define ARC_REG_IO_COH_PARTIAL 0x501
#define ARC_IO_COH_PARTIAL_BIT BIT(0)
#define ARC_REG_IO_COH_AP0_BASE 0x508
#define ARC_REG_IO_COH_AP0_SIZE 0x509
#endif /* _ASM_CACHE_H */