573 lines
14 KiB
C
573 lines
14 KiB
C
/*
|
|
* Driver for the NXP SAA7164 PCIe bridge
|
|
*
|
|
* Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
*
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/wait.h>
|
|
|
|
#include "saa7164.h"
|
|
|
|
int saa7164_cmd_alloc_seqno(struct saa7164_dev *dev)
|
|
{
|
|
int i, ret = -1;
|
|
|
|
mutex_lock(&dev->lock);
|
|
for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
|
|
if (dev->cmds[i].inuse == 0) {
|
|
dev->cmds[i].inuse = 1;
|
|
dev->cmds[i].signalled = 0;
|
|
dev->cmds[i].timeout = 0;
|
|
ret = dev->cmds[i].seqno;
|
|
break;
|
|
}
|
|
}
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void saa7164_cmd_free_seqno(struct saa7164_dev *dev, u8 seqno)
|
|
{
|
|
mutex_lock(&dev->lock);
|
|
if ((dev->cmds[seqno].inuse == 1) &&
|
|
(dev->cmds[seqno].seqno == seqno)) {
|
|
dev->cmds[seqno].inuse = 0;
|
|
dev->cmds[seqno].signalled = 0;
|
|
dev->cmds[seqno].timeout = 0;
|
|
}
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
void saa7164_cmd_timeout_seqno(struct saa7164_dev *dev, u8 seqno)
|
|
{
|
|
mutex_lock(&dev->lock);
|
|
if ((dev->cmds[seqno].inuse == 1) &&
|
|
(dev->cmds[seqno].seqno == seqno)) {
|
|
dev->cmds[seqno].timeout = 1;
|
|
}
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
u32 saa7164_cmd_timeout_get(struct saa7164_dev *dev, u8 seqno)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&dev->lock);
|
|
if ((dev->cmds[seqno].inuse == 1) &&
|
|
(dev->cmds[seqno].seqno == seqno)) {
|
|
ret = dev->cmds[seqno].timeout;
|
|
}
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Commands to the f/w get marshelled to/from this code then onto the PCI
|
|
* -bus/c running buffer. */
|
|
int saa7164_irq_dequeue(struct saa7164_dev *dev)
|
|
{
|
|
int ret = SAA_OK;
|
|
u32 timeout;
|
|
wait_queue_head_t *q = 0;
|
|
dprintk(DBGLVL_CMD, "%s()\n", __func__);
|
|
|
|
/* While any outstand message on the bus exists... */
|
|
do {
|
|
|
|
/* Peek the msg bus */
|
|
tmComResInfo_t tRsp = { 0, 0, 0, 0, 0, 0 };
|
|
ret = saa7164_bus_get(dev, &tRsp, NULL, 1);
|
|
if (ret != SAA_OK)
|
|
break;
|
|
|
|
q = &dev->cmds[tRsp.seqno].wait;
|
|
timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno);
|
|
dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout);
|
|
if (!timeout) {
|
|
dprintk(DBGLVL_CMD,
|
|
"%s() signalled seqno(%d) (for dequeue)\n",
|
|
__func__, tRsp.seqno);
|
|
dev->cmds[tRsp.seqno].signalled = 1;
|
|
wake_up(q);
|
|
} else {
|
|
printk(KERN_ERR
|
|
"%s() found timed out command on the bus\n",
|
|
__func__);
|
|
}
|
|
} while (0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Commands to the f/w get marshelled to/from this code then onto the PCI
|
|
* -bus/c running buffer. */
|
|
int saa7164_cmd_dequeue(struct saa7164_dev *dev)
|
|
{
|
|
int loop = 1;
|
|
int ret;
|
|
u32 timeout;
|
|
wait_queue_head_t *q = 0;
|
|
u8 tmp[512];
|
|
dprintk(DBGLVL_CMD, "%s()\n", __func__);
|
|
|
|
while (loop) {
|
|
|
|
tmComResInfo_t tRsp = { 0, 0, 0, 0, 0, 0 };
|
|
ret = saa7164_bus_get(dev, &tRsp, NULL, 1);
|
|
if (ret == SAA_ERR_EMPTY)
|
|
return SAA_OK;
|
|
|
|
if (ret != SAA_OK)
|
|
return ret;
|
|
|
|
q = &dev->cmds[tRsp.seqno].wait;
|
|
timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno);
|
|
dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout);
|
|
if (timeout) {
|
|
printk(KERN_ERR "found timed out command on the bus\n");
|
|
|
|
/* Clean the bus */
|
|
ret = saa7164_bus_get(dev, &tRsp, &tmp, 0);
|
|
printk(KERN_ERR "ret = %x\n", ret);
|
|
if (ret == SAA_ERR_EMPTY)
|
|
/* Someone else already fetched the response */
|
|
return SAA_OK;
|
|
|
|
if (ret != SAA_OK)
|
|
return ret;
|
|
|
|
if (tRsp.flags & PVC_CMDFLAG_CONTINUE)
|
|
printk(KERN_ERR "split response\n");
|
|
else
|
|
saa7164_cmd_free_seqno(dev, tRsp.seqno);
|
|
|
|
printk(KERN_ERR " timeout continue\n");
|
|
continue;
|
|
}
|
|
|
|
dprintk(DBGLVL_CMD, "%s() signalled seqno(%d) (for dequeue)\n",
|
|
__func__, tRsp.seqno);
|
|
dev->cmds[tRsp.seqno].signalled = 1;
|
|
wake_up(q);
|
|
return SAA_OK;
|
|
}
|
|
|
|
return SAA_OK;
|
|
}
|
|
|
|
int saa7164_cmd_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf)
|
|
{
|
|
tmComResBusInfo_t *bus = &dev->bus;
|
|
u8 cmd_sent;
|
|
u16 size, idx;
|
|
u32 cmds;
|
|
void *tmp;
|
|
int ret = -1;
|
|
|
|
if (!msg) {
|
|
printk(KERN_ERR "%s() !msg\n", __func__);
|
|
return SAA_ERR_BAD_PARAMETER;
|
|
}
|
|
|
|
mutex_lock(&dev->cmds[msg->id].lock);
|
|
|
|
size = msg->size;
|
|
idx = 0;
|
|
cmds = size / bus->m_wMaxReqSize;
|
|
if (size % bus->m_wMaxReqSize == 0)
|
|
cmds -= 1;
|
|
|
|
cmd_sent = 0;
|
|
|
|
/* Split the request into smaller chunks */
|
|
for (idx = 0; idx < cmds; idx++) {
|
|
|
|
msg->flags |= SAA_CMDFLAG_CONTINUE;
|
|
msg->size = bus->m_wMaxReqSize;
|
|
tmp = buf + idx * bus->m_wMaxReqSize;
|
|
|
|
ret = saa7164_bus_set(dev, msg, tmp);
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "%s() set failed %d\n", __func__, ret);
|
|
|
|
if (cmd_sent) {
|
|
ret = SAA_ERR_BUSY;
|
|
goto out;
|
|
}
|
|
ret = SAA_ERR_OVERFLOW;
|
|
goto out;
|
|
}
|
|
cmd_sent = 1;
|
|
}
|
|
|
|
/* If not the last command... */
|
|
if (idx != 0)
|
|
msg->flags &= ~SAA_CMDFLAG_CONTINUE;
|
|
|
|
msg->size = size - idx * bus->m_wMaxReqSize;
|
|
|
|
ret = saa7164_bus_set(dev, msg, buf + idx * bus->m_wMaxReqSize);
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "%s() set last failed %d\n", __func__, ret);
|
|
|
|
if (cmd_sent) {
|
|
ret = SAA_ERR_BUSY;
|
|
goto out;
|
|
}
|
|
ret = SAA_ERR_OVERFLOW;
|
|
goto out;
|
|
}
|
|
ret = SAA_OK;
|
|
|
|
out:
|
|
mutex_unlock(&dev->cmds[msg->id].lock);
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for a signal event, without holding a mutex. Either return TIMEOUT if
|
|
* the event never occured, or SAA_OK if it was signaled during the wait.
|
|
*/
|
|
int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
|
|
{
|
|
wait_queue_head_t *q = 0;
|
|
int ret = SAA_BUS_TIMEOUT;
|
|
unsigned long stamp;
|
|
int r;
|
|
|
|
if (saa_debug >= 4)
|
|
saa7164_bus_dump(dev);
|
|
|
|
dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno);
|
|
|
|
mutex_lock(&dev->lock);
|
|
if ((dev->cmds[seqno].inuse == 1) &&
|
|
(dev->cmds[seqno].seqno == seqno)) {
|
|
q = &dev->cmds[seqno].wait;
|
|
}
|
|
mutex_unlock(&dev->lock);
|
|
|
|
if (q) {
|
|
/* If we haven't been signalled we need to wait */
|
|
if (dev->cmds[seqno].signalled == 0) {
|
|
stamp = jiffies;
|
|
dprintk(DBGLVL_CMD,
|
|
"%s(seqno=%d) Waiting (signalled=%d)\n",
|
|
__func__, seqno, dev->cmds[seqno].signalled);
|
|
|
|
/* Wait for signalled to be flagged or timeout */
|
|
/* In a highly stressed system this can easily extend
|
|
* into multiple seconds before the deferred worker
|
|
* is scheduled, and we're woken up via signal.
|
|
* We typically are signalled in < 50ms but it can
|
|
* take MUCH longer.
|
|
*/
|
|
wait_event_timeout(*q, dev->cmds[seqno].signalled, (HZ * waitsecs));
|
|
r = time_before(jiffies, stamp + (HZ * waitsecs));
|
|
if (r)
|
|
ret = SAA_OK;
|
|
else
|
|
saa7164_cmd_timeout_seqno(dev, seqno);
|
|
|
|
dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d "
|
|
"(signalled=%d)\n", __func__, seqno, r,
|
|
dev->cmds[seqno].signalled);
|
|
} else
|
|
ret = SAA_OK;
|
|
} else
|
|
printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n",
|
|
__func__, seqno);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno)
|
|
{
|
|
int i;
|
|
dprintk(DBGLVL_CMD, "%s()\n", __func__);
|
|
|
|
mutex_lock(&dev->lock);
|
|
for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
|
|
if (dev->cmds[i].inuse == 1) {
|
|
dprintk(DBGLVL_CMD,
|
|
"seqno %d inuse, sig = %d, t/out = %d\n",
|
|
dev->cmds[i].seqno,
|
|
dev->cmds[i].signalled,
|
|
dev->cmds[i].timeout);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
|
|
if ((dev->cmds[i].inuse == 1) && ((i == 0) ||
|
|
(dev->cmds[i].signalled) || (dev->cmds[i].timeout))) {
|
|
dprintk(DBGLVL_CMD, "%s(seqno=%d) calling wake_up\n",
|
|
__func__, i);
|
|
dev->cmds[i].signalled = 1;
|
|
wake_up(&dev->cmds[i].wait);
|
|
}
|
|
}
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, tmComResCmd_t command,
|
|
u16 controlselector, u16 size, void *buf)
|
|
{
|
|
tmComResInfo_t command_t, *pcommand_t;
|
|
tmComResInfo_t response_t, *presponse_t;
|
|
u8 errdata[256];
|
|
u16 resp_dsize;
|
|
u16 data_recd;
|
|
u32 loop;
|
|
int ret;
|
|
int safety = 0;
|
|
|
|
dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, "
|
|
"sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id,
|
|
command, controlselector);
|
|
|
|
if ((size == 0) || (buf == 0)) {
|
|
printk(KERN_ERR "%s() Invalid param\n", __func__);
|
|
return SAA_ERR_BAD_PARAMETER;
|
|
}
|
|
|
|
/* Prepare some basic command/response structures */
|
|
memset(&command_t, 0, sizeof(command_t));
|
|
memset(&response_t, 0, sizeof(response_t));
|
|
pcommand_t = &command_t;
|
|
presponse_t = &response_t;
|
|
command_t.id = id;
|
|
command_t.command = command;
|
|
command_t.controlselector = controlselector;
|
|
command_t.size = size;
|
|
|
|
/* Allocate a unique sequence number */
|
|
ret = saa7164_cmd_alloc_seqno(dev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s() No free sequences\n", __func__);
|
|
ret = SAA_ERR_NO_RESOURCES;
|
|
goto out;
|
|
}
|
|
|
|
command_t.seqno = (u8)ret;
|
|
|
|
/* Send Command */
|
|
resp_dsize = size;
|
|
pcommand_t->size = size;
|
|
|
|
dprintk(DBGLVL_CMD, "%s() pcommand_t.seqno = %d\n",
|
|
__func__, pcommand_t->seqno);
|
|
|
|
dprintk(DBGLVL_CMD, "%s() pcommand_t.size = %d\n",
|
|
__func__, pcommand_t->size);
|
|
|
|
ret = saa7164_cmd_set(dev, pcommand_t, buf);
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "%s() set command failed %d\n", __func__, ret);
|
|
|
|
if (ret != SAA_ERR_BUSY)
|
|
saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
|
|
else
|
|
/* Flag a timeout, because at least one
|
|
* command was sent */
|
|
saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno);
|
|
|
|
goto out;
|
|
}
|
|
|
|
/* With split responses we have to collect the msgs piece by piece */
|
|
data_recd = 0;
|
|
loop = 1;
|
|
while (loop) {
|
|
dprintk(DBGLVL_CMD, "%s() loop\n", __func__);
|
|
|
|
ret = saa7164_cmd_wait(dev, pcommand_t->seqno);
|
|
dprintk(DBGLVL_CMD, "%s() loop ret = %d\n", __func__, ret);
|
|
|
|
/* if power is down and this is not a power command ... */
|
|
|
|
if (ret == SAA_BUS_TIMEOUT) {
|
|
printk(KERN_ERR "Event timed out\n");
|
|
saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno);
|
|
return ret;
|
|
}
|
|
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "spurious error\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Peek response */
|
|
ret = saa7164_bus_get(dev, presponse_t, NULL, 1);
|
|
if (ret == SAA_ERR_EMPTY) {
|
|
dprintk(4, "%s() SAA_ERR_EMPTY\n", __func__);
|
|
continue;
|
|
}
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "peek failed\n");
|
|
return ret;
|
|
}
|
|
|
|
dprintk(DBGLVL_CMD, "%s() presponse_t->seqno = %d\n",
|
|
__func__, presponse_t->seqno);
|
|
|
|
dprintk(DBGLVL_CMD, "%s() presponse_t->flags = 0x%x\n",
|
|
__func__, presponse_t->flags);
|
|
|
|
dprintk(DBGLVL_CMD, "%s() presponse_t->size = %d\n",
|
|
__func__, presponse_t->size);
|
|
|
|
/* Check if the response was for our command */
|
|
if (presponse_t->seqno != pcommand_t->seqno) {
|
|
|
|
dprintk(DBGLVL_CMD,
|
|
"wrong event: seqno = %d, "
|
|
"expected seqno = %d, "
|
|
"will dequeue regardless\n",
|
|
presponse_t->seqno, pcommand_t->seqno);
|
|
|
|
ret = saa7164_cmd_dequeue(dev);
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "dequeue failed, ret = %d\n",
|
|
ret);
|
|
if (safety++ > 16) {
|
|
printk(KERN_ERR
|
|
"dequeue exceeded, safety exit\n");
|
|
return SAA_ERR_BUSY;
|
|
}
|
|
}
|
|
|
|
continue;
|
|
}
|
|
|
|
if ((presponse_t->flags & PVC_RESPONSEFLAG_ERROR) != 0) {
|
|
|
|
memset(&errdata[0], 0, sizeof(errdata));
|
|
|
|
ret = saa7164_bus_get(dev, presponse_t, &errdata[0], 0);
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "get error(2)\n");
|
|
return ret;
|
|
}
|
|
|
|
saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
|
|
|
|
dprintk(DBGLVL_CMD, "%s() errdata %02x%02x%02x%02x\n",
|
|
__func__, errdata[0], errdata[1], errdata[2],
|
|
errdata[3]);
|
|
|
|
/* Map error codes */
|
|
dprintk(DBGLVL_CMD, "%s() cmd, error code = 0x%x\n",
|
|
__func__, errdata[0]);
|
|
|
|
switch (errdata[0]) {
|
|
case PVC_ERRORCODE_INVALID_COMMAND:
|
|
dprintk(DBGLVL_CMD, "%s() INVALID_COMMAND\n",
|
|
__func__);
|
|
ret = SAA_ERR_INVALID_COMMAND;
|
|
break;
|
|
case PVC_ERRORCODE_INVALID_DATA:
|
|
dprintk(DBGLVL_CMD, "%s() INVALID_DATA\n",
|
|
__func__);
|
|
ret = SAA_ERR_BAD_PARAMETER;
|
|
break;
|
|
case PVC_ERRORCODE_TIMEOUT:
|
|
dprintk(DBGLVL_CMD, "%s() TIMEOUT\n", __func__);
|
|
ret = SAA_ERR_TIMEOUT;
|
|
break;
|
|
case PVC_ERRORCODE_NAK:
|
|
dprintk(DBGLVL_CMD, "%s() NAK\n", __func__);
|
|
ret = SAA_ERR_NULL_PACKET;
|
|
break;
|
|
case PVC_ERRORCODE_UNKNOWN:
|
|
case PVC_ERRORCODE_INVALID_CONTROL:
|
|
dprintk(DBGLVL_CMD,
|
|
"%s() UNKNOWN OR INVALID CONTROL\n",
|
|
__func__);
|
|
default:
|
|
dprintk(DBGLVL_CMD, "%s() UNKNOWN\n", __func__);
|
|
ret = SAA_ERR_NOT_SUPPORTED;
|
|
}
|
|
|
|
/* See of other commands are on the bus */
|
|
if (saa7164_cmd_dequeue(dev) != SAA_OK)
|
|
printk(KERN_ERR "dequeue(2) failed\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* If response is invalid */
|
|
if ((presponse_t->id != pcommand_t->id) ||
|
|
(presponse_t->command != pcommand_t->command) ||
|
|
(presponse_t->controlselector !=
|
|
pcommand_t->controlselector) ||
|
|
(((resp_dsize - data_recd) != presponse_t->size) &&
|
|
!(presponse_t->flags & PVC_CMDFLAG_CONTINUE)) ||
|
|
((resp_dsize - data_recd) < presponse_t->size)) {
|
|
|
|
/* Invalid */
|
|
dprintk(DBGLVL_CMD, "%s() Invalid\n", __func__);
|
|
ret = saa7164_bus_get(dev, presponse_t, 0, 0);
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "get failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/* See of other commands are on the bus */
|
|
if (saa7164_cmd_dequeue(dev) != SAA_OK)
|
|
printk(KERN_ERR "dequeue(3) failed\n");
|
|
continue;
|
|
}
|
|
|
|
/* OK, now we're actually getting out correct response */
|
|
ret = saa7164_bus_get(dev, presponse_t, buf + data_recd, 0);
|
|
if (ret != SAA_OK) {
|
|
printk(KERN_ERR "get failed\n");
|
|
return ret;
|
|
}
|
|
|
|
data_recd = presponse_t->size + data_recd;
|
|
if (resp_dsize == data_recd) {
|
|
dprintk(DBGLVL_CMD, "%s() Resp recd\n", __func__);
|
|
break;
|
|
}
|
|
|
|
/* See of other commands are on the bus */
|
|
if (saa7164_cmd_dequeue(dev) != SAA_OK)
|
|
printk(KERN_ERR "dequeue(3) failed\n");
|
|
|
|
continue;
|
|
|
|
} /* (loop) */
|
|
|
|
/* Release the sequence number allocation */
|
|
saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
|
|
|
|
/* if powerdown signal all pending commands */
|
|
|
|
dprintk(DBGLVL_CMD, "%s() Calling dequeue then exit\n", __func__);
|
|
|
|
/* See of other commands are on the bus */
|
|
if (saa7164_cmd_dequeue(dev) != SAA_OK)
|
|
printk(KERN_ERR "dequeue(4) failed\n");
|
|
|
|
ret = SAA_OK;
|
|
out:
|
|
return ret;
|
|
}
|
|
|