592 lines
13 KiB
C
592 lines
13 KiB
C
/*
|
|
* Support for Sharp SL-C7xx PDAs
|
|
* Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
|
|
*
|
|
* Copyright (c) 2004-2005 Richard Purdie
|
|
*
|
|
* Based on Sharp's 2.4 kernel patches/lubbock.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/major.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/backlight.h>
|
|
#include <video/w100fb.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <asm/arch/pxa2xx-gpio.h>
|
|
#include <asm/arch/irda.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/udc.h>
|
|
#include <asm/arch/corgi.h>
|
|
#include <asm/arch/sharpsl.h>
|
|
|
|
#include <asm/mach/sharpsl_param.h>
|
|
#include <asm/hardware/scoop.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
#include "sharpsl.h"
|
|
|
|
|
|
/*
|
|
* Corgi SCOOP Device
|
|
*/
|
|
static struct resource corgi_scoop_resources[] = {
|
|
[0] = {
|
|
.start = 0x10800000,
|
|
.end = 0x10800fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct scoop_config corgi_scoop_setup = {
|
|
.io_dir = CORGI_SCOOP_IO_DIR,
|
|
.io_out = CORGI_SCOOP_IO_OUT,
|
|
};
|
|
|
|
struct platform_device corgiscoop_device = {
|
|
.name = "sharp-scoop",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &corgi_scoop_setup,
|
|
},
|
|
.num_resources = ARRAY_SIZE(corgi_scoop_resources),
|
|
.resource = corgi_scoop_resources,
|
|
};
|
|
|
|
static void corgi_pcmcia_init(void)
|
|
{
|
|
/* Setup default state of GPIO outputs
|
|
before we enable them as outputs. */
|
|
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
|
|
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
|
|
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
|
|
GPIO_bit(GPIO53_nPCE_2);
|
|
|
|
pxa_gpio_mode(GPIO48_nPOE_MD);
|
|
pxa_gpio_mode(GPIO49_nPWE_MD);
|
|
pxa_gpio_mode(GPIO50_nPIOR_MD);
|
|
pxa_gpio_mode(GPIO51_nPIOW_MD);
|
|
pxa_gpio_mode(GPIO55_nPREG_MD);
|
|
pxa_gpio_mode(GPIO56_nPWAIT_MD);
|
|
pxa_gpio_mode(GPIO57_nIOIS16_MD);
|
|
pxa_gpio_mode(GPIO52_nPCE_1_MD);
|
|
pxa_gpio_mode(GPIO53_nPCE_2_MD);
|
|
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
|
|
}
|
|
|
|
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
|
|
{
|
|
.dev = &corgiscoop_device.dev,
|
|
.irq = CORGI_IRQ_GPIO_CF_IRQ,
|
|
.cd_irq = CORGI_IRQ_GPIO_CF_CD,
|
|
.cd_irq_str = "PCMCIA0 CD",
|
|
},
|
|
};
|
|
|
|
static struct scoop_pcmcia_config corgi_pcmcia_config = {
|
|
.devs = &corgi_pcmcia_scoop[0],
|
|
.num_devs = 1,
|
|
.pcmcia_init = corgi_pcmcia_init,
|
|
};
|
|
|
|
EXPORT_SYMBOL(corgiscoop_device);
|
|
|
|
|
|
/*
|
|
* Corgi SSP Device
|
|
*
|
|
* Set the parent as the scoop device because a lot of SSP devices
|
|
* also use scoop functions and this makes the power up/down order
|
|
* work correctly.
|
|
*/
|
|
struct platform_device corgissp_device = {
|
|
.name = "corgi-ssp",
|
|
.dev = {
|
|
.parent = &corgiscoop_device.dev,
|
|
},
|
|
.id = -1,
|
|
};
|
|
|
|
struct corgissp_machinfo corgi_ssp_machinfo = {
|
|
.port = 1,
|
|
.cs_lcdcon = CORGI_GPIO_LCDCON_CS,
|
|
.cs_ads7846 = CORGI_GPIO_ADS7846_CS,
|
|
.cs_max1111 = CORGI_GPIO_MAX1111_CS,
|
|
.clk_lcdcon = 76,
|
|
.clk_ads7846 = 2,
|
|
.clk_max1111 = 8,
|
|
};
|
|
|
|
|
|
/*
|
|
* LCD/Framebuffer
|
|
*/
|
|
static void w100_lcdtg_suspend(struct w100fb_par *par)
|
|
{
|
|
corgi_lcdtg_suspend();
|
|
}
|
|
|
|
static void w100_lcdtg_init(struct w100fb_par *par)
|
|
{
|
|
corgi_lcdtg_hw_init(par->xres);
|
|
}
|
|
|
|
|
|
static struct w100_tg_info corgi_lcdtg_info = {
|
|
.change = w100_lcdtg_init,
|
|
.suspend = w100_lcdtg_suspend,
|
|
.resume = w100_lcdtg_init,
|
|
};
|
|
|
|
static struct w100_mem_info corgi_fb_mem = {
|
|
.ext_cntl = 0x00040003,
|
|
.sdram_mode_reg = 0x00650021,
|
|
.ext_timing_cntl = 0x10002a4a,
|
|
.io_cntl = 0x7ff87012,
|
|
.size = 0x1fffff,
|
|
};
|
|
|
|
static struct w100_gen_regs corgi_fb_regs = {
|
|
.lcd_format = 0x00000003,
|
|
.lcdd_cntl1 = 0x01CC0000,
|
|
.lcdd_cntl2 = 0x0003FFFF,
|
|
.genlcd_cntl1 = 0x00FFFF0D,
|
|
.genlcd_cntl2 = 0x003F3003,
|
|
.genlcd_cntl3 = 0x000102aa,
|
|
};
|
|
|
|
static struct w100_gpio_regs corgi_fb_gpio = {
|
|
.init_data1 = 0x000000bf,
|
|
.init_data2 = 0x00000000,
|
|
.gpio_dir1 = 0x00000000,
|
|
.gpio_oe1 = 0x03c0feff,
|
|
.gpio_dir2 = 0x00000000,
|
|
.gpio_oe2 = 0x00000000,
|
|
};
|
|
|
|
static struct w100_mode corgi_fb_modes[] = {
|
|
{
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.left_margin = 0x56,
|
|
.right_margin = 0x55,
|
|
.upper_margin = 0x03,
|
|
.lower_margin = 0x00,
|
|
.crtc_ss = 0x82360056,
|
|
.crtc_ls = 0xA0280000,
|
|
.crtc_gs = 0x80280028,
|
|
.crtc_vpos_gs = 0x02830002,
|
|
.crtc_rev = 0x00400008,
|
|
.crtc_dclk = 0xA0000000,
|
|
.crtc_gclk = 0x8015010F,
|
|
.crtc_goe = 0x80100110,
|
|
.crtc_ps1_active = 0x41060010,
|
|
.pll_freq = 75,
|
|
.fast_pll_freq = 100,
|
|
.sysclk_src = CLK_SRC_PLL,
|
|
.sysclk_divider = 0,
|
|
.pixclk_src = CLK_SRC_PLL,
|
|
.pixclk_divider = 2,
|
|
.pixclk_divider_rotated = 6,
|
|
},{
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.left_margin = 0x27,
|
|
.right_margin = 0x2e,
|
|
.upper_margin = 0x01,
|
|
.lower_margin = 0x00,
|
|
.crtc_ss = 0x81170027,
|
|
.crtc_ls = 0xA0140000,
|
|
.crtc_gs = 0xC0140014,
|
|
.crtc_vpos_gs = 0x00010141,
|
|
.crtc_rev = 0x00400008,
|
|
.crtc_dclk = 0xA0000000,
|
|
.crtc_gclk = 0x8015010F,
|
|
.crtc_goe = 0x80100110,
|
|
.crtc_ps1_active = 0x41060010,
|
|
.pll_freq = 0,
|
|
.fast_pll_freq = 0,
|
|
.sysclk_src = CLK_SRC_XTAL,
|
|
.sysclk_divider = 0,
|
|
.pixclk_src = CLK_SRC_XTAL,
|
|
.pixclk_divider = 1,
|
|
.pixclk_divider_rotated = 1,
|
|
},
|
|
|
|
};
|
|
|
|
static struct w100fb_mach_info corgi_fb_info = {
|
|
.tg = &corgi_lcdtg_info,
|
|
.init_mode = INIT_MODE_ROTATED,
|
|
.mem = &corgi_fb_mem,
|
|
.regs = &corgi_fb_regs,
|
|
.modelist = &corgi_fb_modes[0],
|
|
.num_modes = 2,
|
|
.gpio = &corgi_fb_gpio,
|
|
.xtal_freq = 12500000,
|
|
.xtal_dbl = 0,
|
|
};
|
|
|
|
static struct resource corgi_fb_resources[] = {
|
|
[0] = {
|
|
.start = 0x08000000,
|
|
.end = 0x08ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device corgifb_device = {
|
|
.name = "w100fb",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(corgi_fb_resources),
|
|
.resource = corgi_fb_resources,
|
|
.dev = {
|
|
.platform_data = &corgi_fb_info,
|
|
.parent = &corgissp_device.dev,
|
|
},
|
|
|
|
};
|
|
|
|
|
|
/*
|
|
* Corgi Backlight Device
|
|
*/
|
|
static void corgi_bl_kick_battery(void)
|
|
{
|
|
void (*kick_batt)(void);
|
|
|
|
kick_batt = symbol_get(sharpsl_battery_kick);
|
|
if (kick_batt) {
|
|
kick_batt();
|
|
symbol_put(sharpsl_battery_kick);
|
|
}
|
|
}
|
|
|
|
static void corgi_bl_set_intensity(int intensity)
|
|
{
|
|
if (intensity > 0x10)
|
|
intensity += 0x10;
|
|
|
|
/* Bits 0-4 are accessed via the SSP interface */
|
|
corgi_ssp_blduty_set(intensity & 0x1f);
|
|
|
|
/* Bit 5 is via SCOOP */
|
|
if (intensity & 0x0020)
|
|
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
|
|
else
|
|
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
|
|
}
|
|
|
|
static struct generic_bl_info corgi_bl_machinfo = {
|
|
.name = "corgi-bl",
|
|
.max_intensity = 0x2f,
|
|
.default_intensity = 0x1f,
|
|
.limit_mask = 0x0b,
|
|
.set_bl_intensity = corgi_bl_set_intensity,
|
|
.kick_battery = corgi_bl_kick_battery,
|
|
};
|
|
|
|
static struct platform_device corgibl_device = {
|
|
.name = "generic-bl",
|
|
.dev = {
|
|
.parent = &corgifb_device.dev,
|
|
.platform_data = &corgi_bl_machinfo,
|
|
},
|
|
.id = -1,
|
|
};
|
|
|
|
|
|
/*
|
|
* Corgi Keyboard Device
|
|
*/
|
|
static struct platform_device corgikbd_device = {
|
|
.name = "corgi-keyboard",
|
|
.id = -1,
|
|
};
|
|
|
|
|
|
/*
|
|
* Corgi LEDs
|
|
*/
|
|
static struct platform_device corgiled_device = {
|
|
.name = "corgi-led",
|
|
.id = -1,
|
|
};
|
|
|
|
|
|
/*
|
|
* Corgi Touch Screen Device
|
|
*/
|
|
static unsigned long (*get_hsync_invperiod)(struct device *dev);
|
|
|
|
static void inline sharpsl_wait_sync(int gpio)
|
|
{
|
|
while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
|
|
while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
|
|
}
|
|
|
|
static unsigned long corgi_get_hsync_invperiod(void)
|
|
{
|
|
if (!get_hsync_invperiod)
|
|
get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
|
|
if (!get_hsync_invperiod)
|
|
return 0;
|
|
|
|
return get_hsync_invperiod(&corgifb_device.dev);
|
|
}
|
|
|
|
static void corgi_put_hsync(void)
|
|
{
|
|
if (get_hsync_invperiod)
|
|
symbol_put(w100fb_get_hsynclen);
|
|
get_hsync_invperiod = NULL;
|
|
}
|
|
|
|
static void corgi_wait_hsync(void)
|
|
{
|
|
sharpsl_wait_sync(CORGI_GPIO_HSYNC);
|
|
}
|
|
|
|
static struct resource corgits_resources[] = {
|
|
[0] = {
|
|
.start = CORGI_IRQ_GPIO_TP_INT,
|
|
.end = CORGI_IRQ_GPIO_TP_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct corgits_machinfo corgi_ts_machinfo = {
|
|
.get_hsync_invperiod = corgi_get_hsync_invperiod,
|
|
.put_hsync = corgi_put_hsync,
|
|
.wait_hsync = corgi_wait_hsync,
|
|
};
|
|
|
|
static struct platform_device corgits_device = {
|
|
.name = "corgi-ts",
|
|
.dev = {
|
|
.parent = &corgissp_device.dev,
|
|
.platform_data = &corgi_ts_machinfo,
|
|
},
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(corgits_resources),
|
|
.resource = corgits_resources,
|
|
};
|
|
|
|
|
|
/*
|
|
* MMC/SD Device
|
|
*
|
|
* The card detect interrupt isn't debounced so we delay it by 250ms
|
|
* to give the card a chance to fully insert/eject.
|
|
*/
|
|
static struct pxamci_platform_data corgi_mci_platform_data;
|
|
|
|
static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
|
|
{
|
|
int err;
|
|
|
|
/* setup GPIO for PXA25x MMC controller */
|
|
pxa_gpio_mode(GPIO6_MMCCLK_MD);
|
|
pxa_gpio_mode(GPIO8_MMCCS0_MD);
|
|
pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
|
|
pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
|
|
|
|
corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
|
|
|
|
err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
|
|
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
"MMC card detect", data);
|
|
if (err)
|
|
printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
struct pxamci_platform_data* p_d = dev->platform_data;
|
|
|
|
if (( 1 << vdd) & p_d->ocr_mask)
|
|
GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
|
|
else
|
|
GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
|
|
}
|
|
|
|
static int corgi_mci_get_ro(struct device *dev)
|
|
{
|
|
return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
|
|
}
|
|
|
|
static void corgi_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
|
|
}
|
|
|
|
static struct pxamci_platform_data corgi_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
.init = corgi_mci_init,
|
|
.get_ro = corgi_mci_get_ro,
|
|
.setpower = corgi_mci_setpower,
|
|
.exit = corgi_mci_exit,
|
|
};
|
|
|
|
|
|
/*
|
|
* Irda
|
|
*/
|
|
static void corgi_irda_transceiver_mode(struct device *dev, int mode)
|
|
{
|
|
if (mode & IR_OFF)
|
|
GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
|
|
else
|
|
GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
|
|
}
|
|
|
|
static struct pxaficp_platform_data corgi_ficp_platform_data = {
|
|
.transceiver_cap = IR_SIRMODE | IR_OFF,
|
|
.transceiver_mode = corgi_irda_transceiver_mode,
|
|
};
|
|
|
|
|
|
/*
|
|
* USB Device Controller
|
|
*/
|
|
static struct pxa2xx_udc_mach_info udc_info __initdata = {
|
|
/* no connect GPIO; corgi can't tell connection status */
|
|
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
|
|
};
|
|
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&corgiscoop_device,
|
|
&corgissp_device,
|
|
&corgifb_device,
|
|
&corgikbd_device,
|
|
&corgibl_device,
|
|
&corgits_device,
|
|
&corgiled_device,
|
|
};
|
|
|
|
static void corgi_poweroff(void)
|
|
{
|
|
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
|
|
|
if (!machine_is_corgi())
|
|
/* Green LED off tells the bootloader to halt */
|
|
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
|
|
arm_machine_restart('h');
|
|
}
|
|
|
|
static void corgi_restart(char mode)
|
|
{
|
|
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
|
|
|
if (!machine_is_corgi())
|
|
/* Green LED on tells the bootloader to reboot */
|
|
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
|
|
arm_machine_restart('h');
|
|
}
|
|
|
|
static void __init corgi_init(void)
|
|
{
|
|
pm_power_off = corgi_poweroff;
|
|
arm_pm_restart = corgi_restart;
|
|
|
|
/* setup sleep mode values */
|
|
PWER = 0x00000002;
|
|
PFER = 0x00000000;
|
|
PRER = 0x00000002;
|
|
PGSR0 = 0x0158C000;
|
|
PGSR1 = 0x00FF0080;
|
|
PGSR2 = 0x0001C004;
|
|
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
|
|
PCFR |= PCFR_OPDE;
|
|
|
|
corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
|
|
|
|
pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
|
|
pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
|
|
|
|
pxa_set_udc_info(&udc_info);
|
|
pxa_set_mci_info(&corgi_mci_platform_data);
|
|
pxa_set_ficp_info(&corgi_ficp_platform_data);
|
|
|
|
platform_scoop_config = &corgi_pcmcia_config;
|
|
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
}
|
|
|
|
static void __init fixup_corgi(struct machine_desc *desc,
|
|
struct tag *tags, char **cmdline, struct meminfo *mi)
|
|
{
|
|
sharpsl_save_param();
|
|
mi->nr_banks=1;
|
|
mi->bank[0].start = 0xa0000000;
|
|
mi->bank[0].node = 0;
|
|
if (machine_is_corgi())
|
|
mi->bank[0].size = (32*1024*1024);
|
|
else
|
|
mi->bank[0].size = (64*1024*1024);
|
|
}
|
|
|
|
#ifdef CONFIG_MACH_CORGI
|
|
MACHINE_START(CORGI, "SHARP Corgi")
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.fixup = fixup_corgi,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa25x_init_irq,
|
|
.init_machine = corgi_init,
|
|
.timer = &pxa_timer,
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_SHEPHERD
|
|
MACHINE_START(SHEPHERD, "SHARP Shepherd")
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.fixup = fixup_corgi,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa25x_init_irq,
|
|
.init_machine = corgi_init,
|
|
.timer = &pxa_timer,
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_HUSKY
|
|
MACHINE_START(HUSKY, "SHARP Husky")
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.fixup = fixup_corgi,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa25x_init_irq,
|
|
.init_machine = corgi_init,
|
|
.timer = &pxa_timer,
|
|
MACHINE_END
|
|
#endif
|
|
|