403 lines
15 KiB
Plaintext
403 lines
15 KiB
Plaintext
Introduction
|
|
============
|
|
|
|
This document describes a collection of device-mapper targets that
|
|
between them implement thin-provisioning and snapshots.
|
|
|
|
The main highlight of this implementation, compared to the previous
|
|
implementation of snapshots, is that it allows many virtual devices to
|
|
be stored on the same data volume. This simplifies administration and
|
|
allows the sharing of data between volumes, thus reducing disk usage.
|
|
|
|
Another significant feature is support for an arbitrary depth of
|
|
recursive snapshots (snapshots of snapshots of snapshots ...). The
|
|
previous implementation of snapshots did this by chaining together
|
|
lookup tables, and so performance was O(depth). This new
|
|
implementation uses a single data structure to avoid this degradation
|
|
with depth. Fragmentation may still be an issue, however, in some
|
|
scenarios.
|
|
|
|
Metadata is stored on a separate device from data, giving the
|
|
administrator some freedom, for example to:
|
|
|
|
- Improve metadata resilience by storing metadata on a mirrored volume
|
|
but data on a non-mirrored one.
|
|
|
|
- Improve performance by storing the metadata on SSD.
|
|
|
|
Status
|
|
======
|
|
|
|
These targets are very much still in the EXPERIMENTAL state. Please
|
|
do not yet rely on them in production. But do experiment and offer us
|
|
feedback. Different use cases will have different performance
|
|
characteristics, for example due to fragmentation of the data volume.
|
|
|
|
If you find this software is not performing as expected please mail
|
|
dm-devel@redhat.com with details and we'll try our best to improve
|
|
things for you.
|
|
|
|
Userspace tools for checking and repairing the metadata are under
|
|
development.
|
|
|
|
Cookbook
|
|
========
|
|
|
|
This section describes some quick recipes for using thin provisioning.
|
|
They use the dmsetup program to control the device-mapper driver
|
|
directly. End users will be advised to use a higher-level volume
|
|
manager such as LVM2 once support has been added.
|
|
|
|
Pool device
|
|
-----------
|
|
|
|
The pool device ties together the metadata volume and the data volume.
|
|
It maps I/O linearly to the data volume and updates the metadata via
|
|
two mechanisms:
|
|
|
|
- Function calls from the thin targets
|
|
|
|
- Device-mapper 'messages' from userspace which control the creation of new
|
|
virtual devices amongst other things.
|
|
|
|
Setting up a fresh pool device
|
|
------------------------------
|
|
|
|
Setting up a pool device requires a valid metadata device, and a
|
|
data device. If you do not have an existing metadata device you can
|
|
make one by zeroing the first 4k to indicate empty metadata.
|
|
|
|
dd if=/dev/zero of=$metadata_dev bs=4096 count=1
|
|
|
|
The amount of metadata you need will vary according to how many blocks
|
|
are shared between thin devices (i.e. through snapshots). If you have
|
|
less sharing than average you'll need a larger-than-average metadata device.
|
|
|
|
As a guide, we suggest you calculate the number of bytes to use in the
|
|
metadata device as 48 * $data_dev_size / $data_block_size but round it up
|
|
to 2MB if the answer is smaller. If you're creating large numbers of
|
|
snapshots which are recording large amounts of change, you may find you
|
|
need to increase this.
|
|
|
|
The largest size supported is 16GB: If the device is larger,
|
|
a warning will be issued and the excess space will not be used.
|
|
|
|
Reloading a pool table
|
|
----------------------
|
|
|
|
You may reload a pool's table, indeed this is how the pool is resized
|
|
if it runs out of space. (N.B. While specifying a different metadata
|
|
device when reloading is not forbidden at the moment, things will go
|
|
wrong if it does not route I/O to exactly the same on-disk location as
|
|
previously.)
|
|
|
|
Using an existing pool device
|
|
-----------------------------
|
|
|
|
dmsetup create pool \
|
|
--table "0 20971520 thin-pool $metadata_dev $data_dev \
|
|
$data_block_size $low_water_mark"
|
|
|
|
$data_block_size gives the smallest unit of disk space that can be
|
|
allocated at a time expressed in units of 512-byte sectors.
|
|
$data_block_size must be between 128 (64KB) and 2097152 (1GB) and a
|
|
multiple of 128 (64KB). $data_block_size cannot be changed after the
|
|
thin-pool is created. People primarily interested in thin provisioning
|
|
may want to use a value such as 1024 (512KB). People doing lots of
|
|
snapshotting may want a smaller value such as 128 (64KB). If you are
|
|
not zeroing newly-allocated data, a larger $data_block_size in the
|
|
region of 256000 (128MB) is suggested.
|
|
|
|
$low_water_mark is expressed in blocks of size $data_block_size. If
|
|
free space on the data device drops below this level then a dm event
|
|
will be triggered which a userspace daemon should catch allowing it to
|
|
extend the pool device. Only one such event will be sent.
|
|
|
|
No special event is triggered if a just resumed device's free space is below
|
|
the low water mark. However, resuming a device always triggers an
|
|
event; a userspace daemon should verify that free space exceeds the low
|
|
water mark when handling this event.
|
|
|
|
A low water mark for the metadata device is maintained in the kernel and
|
|
will trigger a dm event if free space on the metadata device drops below
|
|
it.
|
|
|
|
Updating on-disk metadata
|
|
-------------------------
|
|
|
|
On-disk metadata is committed every time a FLUSH or FUA bio is written.
|
|
If no such requests are made then commits will occur every second. This
|
|
means the thin-provisioning target behaves like a physical disk that has
|
|
a volatile write cache. If power is lost you may lose some recent
|
|
writes. The metadata should always be consistent in spite of any crash.
|
|
|
|
If data space is exhausted the pool will either error or queue IO
|
|
according to the configuration (see: error_if_no_space). If metadata
|
|
space is exhausted or a metadata operation fails: the pool will error IO
|
|
until the pool is taken offline and repair is performed to 1) fix any
|
|
potential inconsistencies and 2) clear the flag that imposes repair.
|
|
Once the pool's metadata device is repaired it may be resized, which
|
|
will allow the pool to return to normal operation. Note that if a pool
|
|
is flagged as needing repair, the pool's data and metadata devices
|
|
cannot be resized until repair is performed. It should also be noted
|
|
that when the pool's metadata space is exhausted the current metadata
|
|
transaction is aborted. Given that the pool will cache IO whose
|
|
completion may have already been acknowledged to upper IO layers
|
|
(e.g. filesystem) it is strongly suggested that consistency checks
|
|
(e.g. fsck) be performed on those layers when repair of the pool is
|
|
required.
|
|
|
|
Thin provisioning
|
|
-----------------
|
|
|
|
i) Creating a new thinly-provisioned volume.
|
|
|
|
To create a new thinly- provisioned volume you must send a message to an
|
|
active pool device, /dev/mapper/pool in this example.
|
|
|
|
dmsetup message /dev/mapper/pool 0 "create_thin 0"
|
|
|
|
Here '0' is an identifier for the volume, a 24-bit number. It's up
|
|
to the caller to allocate and manage these identifiers. If the
|
|
identifier is already in use, the message will fail with -EEXIST.
|
|
|
|
ii) Using a thinly-provisioned volume.
|
|
|
|
Thinly-provisioned volumes are activated using the 'thin' target:
|
|
|
|
dmsetup create thin --table "0 2097152 thin /dev/mapper/pool 0"
|
|
|
|
The last parameter is the identifier for the thinp device.
|
|
|
|
Internal snapshots
|
|
------------------
|
|
|
|
i) Creating an internal snapshot.
|
|
|
|
Snapshots are created with another message to the pool.
|
|
|
|
N.B. If the origin device that you wish to snapshot is active, you
|
|
must suspend it before creating the snapshot to avoid corruption.
|
|
This is NOT enforced at the moment, so please be careful!
|
|
|
|
dmsetup suspend /dev/mapper/thin
|
|
dmsetup message /dev/mapper/pool 0 "create_snap 1 0"
|
|
dmsetup resume /dev/mapper/thin
|
|
|
|
Here '1' is the identifier for the volume, a 24-bit number. '0' is the
|
|
identifier for the origin device.
|
|
|
|
ii) Using an internal snapshot.
|
|
|
|
Once created, the user doesn't have to worry about any connection
|
|
between the origin and the snapshot. Indeed the snapshot is no
|
|
different from any other thinly-provisioned device and can be
|
|
snapshotted itself via the same method. It's perfectly legal to
|
|
have only one of them active, and there's no ordering requirement on
|
|
activating or removing them both. (This differs from conventional
|
|
device-mapper snapshots.)
|
|
|
|
Activate it exactly the same way as any other thinly-provisioned volume:
|
|
|
|
dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 1"
|
|
|
|
External snapshots
|
|
------------------
|
|
|
|
You can use an external _read only_ device as an origin for a
|
|
thinly-provisioned volume. Any read to an unprovisioned area of the
|
|
thin device will be passed through to the origin. Writes trigger
|
|
the allocation of new blocks as usual.
|
|
|
|
One use case for this is VM hosts that want to run guests on
|
|
thinly-provisioned volumes but have the base image on another device
|
|
(possibly shared between many VMs).
|
|
|
|
You must not write to the origin device if you use this technique!
|
|
Of course, you may write to the thin device and take internal snapshots
|
|
of the thin volume.
|
|
|
|
i) Creating a snapshot of an external device
|
|
|
|
This is the same as creating a thin device.
|
|
You don't mention the origin at this stage.
|
|
|
|
dmsetup message /dev/mapper/pool 0 "create_thin 0"
|
|
|
|
ii) Using a snapshot of an external device.
|
|
|
|
Append an extra parameter to the thin target specifying the origin:
|
|
|
|
dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 0 /dev/image"
|
|
|
|
N.B. All descendants (internal snapshots) of this snapshot require the
|
|
same extra origin parameter.
|
|
|
|
Deactivation
|
|
------------
|
|
|
|
All devices using a pool must be deactivated before the pool itself
|
|
can be.
|
|
|
|
dmsetup remove thin
|
|
dmsetup remove snap
|
|
dmsetup remove pool
|
|
|
|
Reference
|
|
=========
|
|
|
|
'thin-pool' target
|
|
------------------
|
|
|
|
i) Constructor
|
|
|
|
thin-pool <metadata dev> <data dev> <data block size (sectors)> \
|
|
<low water mark (blocks)> [<number of feature args> [<arg>]*]
|
|
|
|
Optional feature arguments:
|
|
|
|
skip_block_zeroing: Skip the zeroing of newly-provisioned blocks.
|
|
|
|
ignore_discard: Disable discard support.
|
|
|
|
no_discard_passdown: Don't pass discards down to the underlying
|
|
data device, but just remove the mapping.
|
|
|
|
read_only: Don't allow any changes to be made to the pool
|
|
metadata.
|
|
|
|
error_if_no_space: Error IOs, instead of queueing, if no space.
|
|
|
|
Data block size must be between 64KB (128 sectors) and 1GB
|
|
(2097152 sectors) inclusive.
|
|
|
|
|
|
ii) Status
|
|
|
|
<transaction id> <used metadata blocks>/<total metadata blocks>
|
|
<used data blocks>/<total data blocks> <held metadata root>
|
|
ro|rw|out_of_data_space [no_]discard_passdown [error|queue]_if_no_space
|
|
needs_check|-
|
|
|
|
transaction id:
|
|
A 64-bit number used by userspace to help synchronise with metadata
|
|
from volume managers.
|
|
|
|
used data blocks / total data blocks
|
|
If the number of free blocks drops below the pool's low water mark a
|
|
dm event will be sent to userspace. This event is edge-triggered and
|
|
it will occur only once after each resume so volume manager writers
|
|
should register for the event and then check the target's status.
|
|
|
|
held metadata root:
|
|
The location, in blocks, of the metadata root that has been
|
|
'held' for userspace read access. '-' indicates there is no
|
|
held root.
|
|
|
|
discard_passdown|no_discard_passdown
|
|
Whether or not discards are actually being passed down to the
|
|
underlying device. When this is enabled when loading the table,
|
|
it can get disabled if the underlying device doesn't support it.
|
|
|
|
ro|rw|out_of_data_space
|
|
If the pool encounters certain types of device failures it will
|
|
drop into a read-only metadata mode in which no changes to
|
|
the pool metadata (like allocating new blocks) are permitted.
|
|
|
|
In serious cases where even a read-only mode is deemed unsafe
|
|
no further I/O will be permitted and the status will just
|
|
contain the string 'Fail'. The userspace recovery tools
|
|
should then be used.
|
|
|
|
error_if_no_space|queue_if_no_space
|
|
If the pool runs out of data or metadata space, the pool will
|
|
either queue or error the IO destined to the data device. The
|
|
default is to queue the IO until more space is added or the
|
|
'no_space_timeout' expires. The 'no_space_timeout' dm-thin-pool
|
|
module parameter can be used to change this timeout -- it
|
|
defaults to 60 seconds but may be disabled using a value of 0.
|
|
|
|
needs_check
|
|
A metadata operation has failed, resulting in the needs_check
|
|
flag being set in the metadata's superblock. The metadata
|
|
device must be deactivated and checked/repaired before the
|
|
thin-pool can be made fully operational again. '-' indicates
|
|
needs_check is not set.
|
|
|
|
iii) Messages
|
|
|
|
create_thin <dev id>
|
|
|
|
Create a new thinly-provisioned device.
|
|
<dev id> is an arbitrary unique 24-bit identifier chosen by
|
|
the caller.
|
|
|
|
create_snap <dev id> <origin id>
|
|
|
|
Create a new snapshot of another thinly-provisioned device.
|
|
<dev id> is an arbitrary unique 24-bit identifier chosen by
|
|
the caller.
|
|
<origin id> is the identifier of the thinly-provisioned device
|
|
of which the new device will be a snapshot.
|
|
|
|
delete <dev id>
|
|
|
|
Deletes a thin device. Irreversible.
|
|
|
|
set_transaction_id <current id> <new id>
|
|
|
|
Userland volume managers, such as LVM, need a way to
|
|
synchronise their external metadata with the internal metadata of the
|
|
pool target. The thin-pool target offers to store an
|
|
arbitrary 64-bit transaction id and return it on the target's
|
|
status line. To avoid races you must provide what you think
|
|
the current transaction id is when you change it with this
|
|
compare-and-swap message.
|
|
|
|
reserve_metadata_snap
|
|
|
|
Reserve a copy of the data mapping btree for use by userland.
|
|
This allows userland to inspect the mappings as they were when
|
|
this message was executed. Use the pool's status command to
|
|
get the root block associated with the metadata snapshot.
|
|
|
|
release_metadata_snap
|
|
|
|
Release a previously reserved copy of the data mapping btree.
|
|
|
|
'thin' target
|
|
-------------
|
|
|
|
i) Constructor
|
|
|
|
thin <pool dev> <dev id> [<external origin dev>]
|
|
|
|
pool dev:
|
|
the thin-pool device, e.g. /dev/mapper/my_pool or 253:0
|
|
|
|
dev id:
|
|
the internal device identifier of the device to be
|
|
activated.
|
|
|
|
external origin dev:
|
|
an optional block device outside the pool to be treated as a
|
|
read-only snapshot origin: reads to unprovisioned areas of the
|
|
thin target will be mapped to this device.
|
|
|
|
The pool doesn't store any size against the thin devices. If you
|
|
load a thin target that is smaller than you've been using previously,
|
|
then you'll have no access to blocks mapped beyond the end. If you
|
|
load a target that is bigger than before, then extra blocks will be
|
|
provisioned as and when needed.
|
|
|
|
ii) Status
|
|
|
|
<nr mapped sectors> <highest mapped sector>
|
|
|
|
If the pool has encountered device errors and failed, the status
|
|
will just contain the string 'Fail'. The userspace recovery
|
|
tools should then be used.
|
|
|
|
In the case where <nr mapped sectors> is 0, there is no highest
|
|
mapped sector and the value of <highest mapped sector> is unspecified.
|