linux_old1/arch/powerpc/boot/dts/mpc8568mds.dts

470 lines
10 KiB
Plaintext

/*
* MPC8568E MDS Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/*
/memreserve/ 00000000 1000000;
*/
/ {
model = "MPC8568EMDS";
compatible = "MPC8568EMDS", "MPC85xxMDS";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8568@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <00000000 10000000>;
};
bcsr@f8000000 {
device_type = "board-control";
reg = <f8000000 8000>;
};
soc8568@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00001000>;
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8568-memory-controller";
reg = <2000 1000>;
interrupt-parent = <&mpic>;
interrupts = <12 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8568-l2-cache-controller";
reg = <20000 1000>;
cache-line-size = <20>; // 32 bytes
cache-size = <80000>; // L2, 512K
interrupt-parent = <&mpic>;
interrupts = <10 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <2b 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <68>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <2b 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <24520 20>;
phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <1d 2 1e 2 22 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <25000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 2 24 2 28 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <2a 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
reg = <e0000 1000>;
fsl,has-rstcr;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <2a 2>;
interrupt-parent = <&mpic>;
};
crypto@30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 f000>;
interrupts = <2d 2>;
interrupt-parent = <&mpic>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <000000fe>;
descriptor-types-mask = <012b0ebf>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
par_io@e0100 {
reg = <e0100 100>;
device_type = "par_io";
num-ports = <7>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
4 0a 1 0 2 0 /* TxD0 */
4 09 1 0 2 0 /* TxD1 */
4 08 1 0 2 0 /* TxD2 */
4 07 1 0 2 0 /* TxD3 */
4 17 1 0 2 0 /* TxD4 */
4 16 1 0 2 0 /* TxD5 */
4 15 1 0 2 0 /* TxD6 */
4 14 1 0 2 0 /* TxD7 */
4 0f 2 0 2 0 /* RxD0 */
4 0e 2 0 2 0 /* RxD1 */
4 0d 2 0 2 0 /* RxD2 */
4 0c 2 0 2 0 /* RxD3 */
4 1d 2 0 2 0 /* RxD4 */
4 1c 2 0 2 0 /* RxD5 */
4 1b 2 0 2 0 /* RxD6 */
4 1a 2 0 2 0 /* RxD7 */
4 0b 1 0 2 0 /* TX_EN */
4 18 1 0 2 0 /* TX_ER */
4 10 2 0 2 0 /* RX_DV */
4 1e 2 0 2 0 /* RX_ER */
4 11 2 0 2 0 /* RX_CLK */
4 13 1 0 2 0 /* GTX_CLK */
1 1f 2 0 3 0>; /* GTX125 */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
5 0a 1 0 2 0 /* TxD0 */
5 09 1 0 2 0 /* TxD1 */
5 08 1 0 2 0 /* TxD2 */
5 07 1 0 2 0 /* TxD3 */
5 17 1 0 2 0 /* TxD4 */
5 16 1 0 2 0 /* TxD5 */
5 15 1 0 2 0 /* TxD6 */
5 14 1 0 2 0 /* TxD7 */
5 0f 2 0 2 0 /* RxD0 */
5 0e 2 0 2 0 /* RxD1 */
5 0d 2 0 2 0 /* RxD2 */
5 0c 2 0 2 0 /* RxD3 */
5 1d 2 0 2 0 /* RxD4 */
5 1c 2 0 2 0 /* RxD5 */
5 1b 2 0 2 0 /* RxD6 */
5 1a 2 0 2 0 /* RxD7 */
5 0b 1 0 2 0 /* TX_EN */
5 18 1 0 2 0 /* TX_ER */
5 10 2 0 2 0 /* RX_DV */
5 1e 2 0 2 0 /* RX_ER */
5 11 2 0 2 0 /* RX_CLK */
5 13 1 0 2 0 /* GTX_CLK */
1 1f 2 0 3 0 /* GTX125 */
4 06 3 0 2 0 /* MDIO */
4 05 1 0 2 0>; /* MDC */
};
};
};
qe@e0080000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
model = "QE";
ranges = <0 e0080000 00040000>;
reg = <e0080000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
muram@10000 {
device_type = "muram";
ranges = <0 00010000 0000c000>;
data-only@0{
reg = <0 c000>;
};
};
spi@4c0 {
device_type = "spi";
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
spi@500 {
device_type = "spi";
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
enet2: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
cell-index = <1>;
device-id = <1>;
reg = <2000 200>;
interrupts = <20>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
pio-handle = <&pio1>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
enet3: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
cell-index = <2>;
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
pio-handle = <&pio2>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2120 18>;
compatible = "ucc_geth_phy";
/* These are the same PHYs as on
* gianfar's MDIO bus */
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
big-endian;
interrupts = <2e 2 2e 2>; //high:30 low:30
interrupt-parent = <&mpic>;
};
};
pci0: pci@e0008000 {
cell-index = <0>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
9000 0 0 1 &mpic 5 1
9000 0 0 2 &mpic 6 1
9000 0 0 3 &mpic 7 1
9000 0 0 4 &mpic 4 1
/* IDSEL 0x13 AD19 */
9800 0 0 1 &mpic 6 1
9800 0 0 2 &mpic 7 1
9800 0 0 3 &mpic 4 1
9800 0 0 4 &mpic 5 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 ff>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00800000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
/* PCI Express */
pci1: pcie@e000a000 {
cell-index = <2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
00000 0 0 1 &mpic 0 1
00000 0 0 2 &mpic 1 1
00000 0 0 3 &mpic 2 1
00000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <1a 2>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 e2800000 0 00800000>;
clock-frequency = <1fca055>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e000a000 1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <02000000 0 a0000000
02000000 0 a0000000
0 10000000
01000000 0 00000000
01000000 0 00000000
0 00800000>;
};
};
};