284 lines
6.6 KiB
C
284 lines
6.6 KiB
C
/*
|
|
* Marvell EBU SoC Device Bus Controller
|
|
* (memory controller for NOR/NAND/SRAM/FPGA devices)
|
|
*
|
|
* Copyright (C) 2013 Marvell
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/* Register definitions */
|
|
#define DEV_WIDTH_BIT 30
|
|
#define BADR_SKEW_BIT 28
|
|
#define RD_HOLD_BIT 23
|
|
#define ACC_NEXT_BIT 17
|
|
#define RD_SETUP_BIT 12
|
|
#define ACC_FIRST_BIT 6
|
|
|
|
#define SYNC_ENABLE_BIT 24
|
|
#define WR_HIGH_BIT 16
|
|
#define WR_LOW_BIT 8
|
|
|
|
#define READ_PARAM_OFFSET 0x0
|
|
#define WRITE_PARAM_OFFSET 0x4
|
|
|
|
struct devbus_read_params {
|
|
u32 bus_width;
|
|
u32 badr_skew;
|
|
u32 turn_off;
|
|
u32 acc_first;
|
|
u32 acc_next;
|
|
u32 rd_setup;
|
|
u32 rd_hold;
|
|
};
|
|
|
|
struct devbus_write_params {
|
|
u32 sync_enable;
|
|
u32 wr_high;
|
|
u32 wr_low;
|
|
u32 ale_wr;
|
|
};
|
|
|
|
struct devbus {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
unsigned long tick_ps;
|
|
};
|
|
|
|
static int get_timing_param_ps(struct devbus *devbus,
|
|
struct device_node *node,
|
|
const char *name,
|
|
u32 *ticks)
|
|
{
|
|
u32 time_ps;
|
|
int err;
|
|
|
|
err = of_property_read_u32(node, name, &time_ps);
|
|
if (err < 0) {
|
|
dev_err(devbus->dev, "%s has no '%s' property\n",
|
|
name, node->full_name);
|
|
return err;
|
|
}
|
|
|
|
*ticks = (time_ps + devbus->tick_ps - 1) / devbus->tick_ps;
|
|
|
|
dev_dbg(devbus->dev, "%s: %u ps -> 0x%x\n",
|
|
name, time_ps, *ticks);
|
|
return 0;
|
|
}
|
|
|
|
static int devbus_set_timing_params(struct devbus *devbus,
|
|
struct device_node *node)
|
|
{
|
|
struct devbus_read_params r;
|
|
struct devbus_write_params w;
|
|
u32 value;
|
|
int err;
|
|
|
|
dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
|
|
devbus->tick_ps);
|
|
|
|
/* Get read timings */
|
|
err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width);
|
|
if (err < 0) {
|
|
dev_err(devbus->dev,
|
|
"%s has no 'devbus,bus-width' property\n",
|
|
node->full_name);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* The bus width is encoded into the register as 0 for 8 bits,
|
|
* and 1 for 16 bits, so we do the necessary conversion here.
|
|
*/
|
|
if (r.bus_width == 8)
|
|
r.bus_width = 0;
|
|
else if (r.bus_width == 16)
|
|
r.bus_width = 1;
|
|
else {
|
|
dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width);
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
|
|
&r.badr_skew);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps",
|
|
&r.turn_off);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps",
|
|
&r.acc_first);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps",
|
|
&r.acc_next);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
|
|
&r.rd_setup);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
|
|
&r.rd_hold);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Get write timings */
|
|
err = of_property_read_u32(node, "devbus,sync-enable",
|
|
&w.sync_enable);
|
|
if (err < 0) {
|
|
dev_err(devbus->dev,
|
|
"%s has no 'devbus,sync-enable' property\n",
|
|
node->full_name);
|
|
return err;
|
|
}
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps",
|
|
&w.ale_wr);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps",
|
|
&w.wr_low);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps",
|
|
&w.wr_high);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Set read timings */
|
|
value = r.bus_width << DEV_WIDTH_BIT |
|
|
r.badr_skew << BADR_SKEW_BIT |
|
|
r.rd_hold << RD_HOLD_BIT |
|
|
r.acc_next << ACC_NEXT_BIT |
|
|
r.rd_setup << RD_SETUP_BIT |
|
|
r.acc_first << ACC_FIRST_BIT |
|
|
r.turn_off;
|
|
|
|
dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
|
|
devbus->base + READ_PARAM_OFFSET,
|
|
value);
|
|
|
|
writel(value, devbus->base + READ_PARAM_OFFSET);
|
|
|
|
/* Set write timings */
|
|
value = w.sync_enable << SYNC_ENABLE_BIT |
|
|
w.wr_low << WR_LOW_BIT |
|
|
w.wr_high << WR_HIGH_BIT |
|
|
w.ale_wr;
|
|
|
|
dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",
|
|
devbus->base + WRITE_PARAM_OFFSET,
|
|
value);
|
|
|
|
writel(value, devbus->base + WRITE_PARAM_OFFSET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_devbus_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct devbus *devbus;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
unsigned long rate;
|
|
int err;
|
|
|
|
devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
|
|
if (!devbus)
|
|
return -ENOMEM;
|
|
|
|
devbus->dev = dev;
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
devbus->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(devbus->base))
|
|
return PTR_ERR(devbus->base);
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return PTR_ERR(clk);
|
|
clk_prepare_enable(clk);
|
|
|
|
/*
|
|
* Obtain clock period in picoseconds,
|
|
* we need this in order to convert timing
|
|
* parameters from cycles to picoseconds.
|
|
*/
|
|
rate = clk_get_rate(clk) / 1000;
|
|
devbus->tick_ps = 1000000000 / rate;
|
|
|
|
/* Read the device tree node and set the new timing parameters */
|
|
err = devbus_set_timing_params(devbus, node);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/*
|
|
* We need to create a child device explicitly from here to
|
|
* guarantee that the child will be probed after the timing
|
|
* parameters for the bus are written.
|
|
*/
|
|
err = of_platform_populate(node, NULL, NULL, dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mvebu_devbus_of_match[] = {
|
|
{ .compatible = "marvell,mvebu-devbus" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match);
|
|
|
|
static struct platform_driver mvebu_devbus_driver = {
|
|
.probe = mvebu_devbus_probe,
|
|
.driver = {
|
|
.name = "mvebu-devbus",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = mvebu_devbus_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init mvebu_devbus_init(void)
|
|
{
|
|
return platform_driver_register(&mvebu_devbus_driver);
|
|
}
|
|
module_init(mvebu_devbus_init);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Marvell EBU SoC Device Bus controller");
|