linux_old1/drivers/cdrom/sbpcd.h

840 lines
25 KiB
C
Raw Blame History

/*
* sbpcd.h Specify interface address and interface type here.
*/
/*
* Attention! This file contains user-serviceable parts!
* I recommend to make use of it...
* If you feel helpless, look into Documentation/cdrom/sbpcd
* (good idea anyway, at least before mailing me).
*
* The definitions for the first controller can get overridden by
* the kernel command line ("lilo boot option").
* Examples:
* sbpcd=0x300,LaserMate
* or
* sbpcd=0x230,SoundBlaster
* or
* sbpcd=0x338,SoundScape
* or
* sbpcd=0x2C0,Teac16bit
*
* If sbpcd gets used as a module, you can load it with
* insmod sbpcd.o sbpcd=0x300,0
* or
* insmod sbpcd.o sbpcd=0x230,1
* or
* insmod sbpcd.o sbpcd=0x338,2
* or
* insmod sbpcd.o sbpcd=0x2C0,3
* respective to override the configured address and type.
*/
/*
* define your CDROM port base address as CDROM_PORT
* and specify the type of your interface card as SBPRO.
*
* address:
* ========
* SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
* LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
* SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
* specify the REAL address here, not the configuration port address. Look
* at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
* sbpcd auto-probe, if you are not firm with the address.
* There are some soundcards on the market with 0x0630, 0x0650, ...; their
* type is not obvious (both types are possible).
*
* example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
* if your soundcard has its CDROM port above 0x300, specify
* that address and try SBPRO 0 first.
* if your SoundScape configuration port is at 0x330, specify
* 0x338 and SBPRO 2.
*
* interface type:
* ===============
* set SBPRO to 1 for "true" SoundBlaster card
* set SBPRO to 0 for "compatible" soundcards and
* for "poor" (no sound) interface cards.
* set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
* set SBPRO to 3 for Teac 16bit interface cards
*
* Almost all "compatible" sound boards need to set SBPRO to 0.
* If SBPRO is set wrong, the drives will get found - but any
* data access will give errors (audio access will work).
* The "OmniCD" no-sound interface card from CreativeLabs and most Teac
* interface cards need SBPRO 1.
*
* sound base:
* ===========
* The SOUND_BASE definition tells if we should try to turn the CD sound
* channels on. It will only be of use regarding soundcards with a SbPro
* compatible mixer.
*
* Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
* #define SOUND_BASE 0 leaves the soundcard untouched
*/
#define CDROM_PORT 0x340 /* <-----------<< port address */
#define SBPRO 0 /* <-----------<< interface type */
#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
/*
* some more or less user dependent definitions - service them!
*/
/* Set this to 0 once you have configured your interface definitions right. */
#define DISTRIBUTION 1
/*
* Time to wait after giving a message.
* This gets important if you enable non-standard DBG_xxx flags.
* You will see what happens if you omit the pause or make it
* too short. Be warned!
*/
#define KLOGD_PAUSE 1
/* tray control: eject tray if no disk is in */
#if DISTRIBUTION
#define JUKEBOX 0
#else
#define JUKEBOX 1
#endif /* DISTRIBUTION */
/* tray control: eject tray after last use */
#if DISTRIBUTION
#define EJECT 0
#else
#define EJECT 1
#endif /* DISTRIBUTION */
/* max. number of audio frames to read with one */
/* request (allocates n* 2352 bytes kernel memory!) */
/* may be freely adjusted, f.e. 75 (= 1 sec.), at */
/* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */
#define READ_AUDIO 0
/* Optimizations for the Teac CD-55A drive read performance.
* SBP_TEAC_SPEED can be changed here, or one can set the
* variable "teac" when loading as a module.
* Valid settings are:
* 0 - very slow - the recommended "DISTRIBUTION 1" setup.
* 1 - 2x performance with little overhead. No busy waiting.
* 2 - 4x performance with 5ms overhead per read. Busy wait.
*
* Setting SBP_TEAC_SPEED or the variable 'teac' to anything
* other than 0 may cause problems. If you run into them, first
* change SBP_TEAC_SPEED back to 0 and see if your drive responds
* normally. If yes, you are "allowed" to report your case - to help
* me with the driver, not to solve your hassle. Don<6F>t mail if you
* simply are stuck into your own "tuning" experiments, you know?
*/
#define SBP_TEAC_SPEED 1
/*==========================================================================*/
/*==========================================================================*/
/*
* nothing to change below here if you are not fully aware what you're doing
*/
#ifndef _LINUX_SBPCD_H
#define _LINUX_SBPCD_H
/*==========================================================================*/
/*==========================================================================*/
/*
* driver's own read_ahead, data mode
*/
#define SBP_BUFFER_FRAMES 8
#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
#undef FUTURE
#undef SAFE_MIXED
#define TEST_UPC 0
#define SPEA_TEST 0
#define TEST_STI 0
#define OLD_BUSY 0
#undef PATH_CHECK
#ifndef SOUND_BASE
#define SOUND_BASE 0
#endif
#if DISTRIBUTION
#undef SBP_TEAC_SPEED
#define SBP_TEAC_SPEED 0
#endif
/*==========================================================================*/
/*
* DDI interface definitions
* "invented" by Fred N. van Kempen..
*/
#define DDIOCSDBG 0x9000
/*==========================================================================*/
/*
* "private" IOCTL functions
*/
#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
/*==========================================================================*/
/*
* Debug output levels
*/
#define DBG_INF 1 /* necessary information */
#define DBG_BSZ 2 /* BLOCK_SIZE trace */
#define DBG_REA 3 /* READ status trace */
#define DBG_CHK 4 /* MEDIA CHECK trace */
#define DBG_TIM 5 /* datarate timer test */
#define DBG_INI 6 /* initialization trace */
#define DBG_TOC 7 /* tell TocEntry values */
#define DBG_IOC 8 /* ioctl trace */
#define DBG_STA 9 /* ResponseStatus() trace */
#define DBG_ERR 10 /* cc_ReadError() trace */
#define DBG_CMD 11 /* cmd_out() trace */
#define DBG_WRN 12 /* give explanation before auto-probing */
#define DBG_MUL 13 /* multi session code test */
#define DBG_IDX 14 /* test code for drive_id !=0 */
#define DBG_IOX 15 /* some special information */
#define DBG_DID 16 /* drive ID test */
#define DBG_RES 17 /* drive reset info */
#define DBG_SPI 18 /* SpinUp test */
#define DBG_IOS 19 /* ioctl trace: subchannel functions */
#define DBG_IO2 20 /* ioctl trace: general */
#define DBG_UPC 21 /* show UPC information */
#define DBG_XA1 22 /* XA mode debugging */
#define DBG_LCK 23 /* door (un)lock info */
#define DBG_SQ1 24 /* dump SubQ frame */
#define DBG_AUD 25 /* READ AUDIO debugging */
#define DBG_SEQ 26 /* Sequoia interface configuration trace */
#define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */
#define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */
#define DBG_TEA 29 /* TEAC CD-55A debugging trace */
#define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */
#define DBG_000 31 /* unnecessary information */
/*==========================================================================*/
/*==========================================================================*/
/*
* bits of flags_cmd_out:
*/
#define f_respo3 0x100
#define f_putcmd 0x80
#define f_respo2 0x40
#define f_lopsta 0x20
#define f_getsta 0x10
#define f_ResponseStatus 0x08
#define f_obey_p_check 0x04
#define f_bit1 0x02
#define f_wait_if_busy 0x01
/*
* diskstate_flags:
*/
#define x80_bit 0x80
#define upc_bit 0x40
#define volume_bit 0x20
#define toc_bit 0x10
#define multisession_bit 0x08
#define cd_size_bit 0x04
#define subq_bit 0x02
#define frame_size_bit 0x01
/*
* disk states (bits of diskstate_flags):
*/
#define upc_valid (current_drive->diskstate_flags&upc_bit)
#define volume_valid (current_drive->diskstate_flags&volume_bit)
#define toc_valid (current_drive->diskstate_flags&toc_bit)
#define cd_size_valid (current_drive->diskstate_flags&cd_size_bit)
#define subq_valid (current_drive->diskstate_flags&subq_bit)
#define frame_size_valid (current_drive->diskstate_flags&frame_size_bit)
/*
* the status_bits variable
*/
#define p_success 0x100
#define p_door_closed 0x80
#define p_caddy_in 0x40
#define p_spinning 0x20
#define p_check 0x10
#define p_busy_new 0x08
#define p_door_locked 0x04
#define p_disk_ok 0x01
/*
* LCS-7260 special status result bits:
*/
#define p_lcs_door_locked 0x02
#define p_lcs_door_closed 0x01 /* probably disk_in */
/*
* CR-52x special status result bits:
*/
#define p_caddin_old 0x40
#define p_success_old 0x08
#define p_busy_old 0x04
#define p_bit_1 0x02 /* hopefully unused now */
/*
* "generation specific" defs of the status result bits:
*/
#define p0_door_closed 0x80
#define p0_caddy_in 0x40
#define p0_spinning 0x20
#define p0_check 0x10
#define p0_success 0x08 /* unused */
#define p0_busy 0x04
#define p0_bit_1 0x02 /* unused */
#define p0_disk_ok 0x01
#define pL_disk_in 0x40
#define pL_spinning 0x20
#define pL_check 0x10
#define pL_success 0x08 /* unused ?? */
#define pL_busy 0x04
#define pL_door_locked 0x02
#define pL_door_closed 0x01
#define pV_door_closed 0x40
#define pV_spinning 0x20
#define pV_check 0x10
#define pV_success 0x08
#define pV_busy 0x04
#define pV_door_locked 0x02
#define pV_disk_ok 0x01
#define p1_door_closed 0x80
#define p1_disk_in 0x40
#define p1_spinning 0x20
#define p1_check 0x10
#define p1_busy 0x08
#define p1_door_locked 0x04
#define p1_bit_1 0x02 /* unused */
#define p1_disk_ok 0x01
#define p2_disk_ok 0x80
#define p2_door_locked 0x40
#define p2_spinning 0x20
#define p2_busy2 0x10
#define p2_busy1 0x08
#define p2_door_closed 0x04
#define p2_disk_in 0x02
#define p2_check 0x01
/*
* used drive states:
*/
#define st_door_closed (current_drive->status_bits&p_door_closed)
#define st_caddy_in (current_drive->status_bits&p_caddy_in)
#define st_spinning (current_drive->status_bits&p_spinning)
#define st_check (current_drive->status_bits&p_check)
#define st_busy (current_drive->status_bits&p_busy_new)
#define st_door_locked (current_drive->status_bits&p_door_locked)
#define st_diskok (current_drive->status_bits&p_disk_ok)
/*
* bits of the CDi_status register:
*/
#define s_not_result_ready 0x04 /* 0: "result ready" */
#define s_not_data_ready 0x02 /* 0: "data ready" */
#define s_attention 0x01 /* 1: "attention required" */
/*
* usable as:
*/
#define DRV_ATTN ((inb(CDi_status)&s_attention)!=0)
#define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0)
#define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0)
/*
* drive families and types (firmware versions):
*/
#define drv_fam0 0x0100 /* CR-52x family */
#define drv_199 (drv_fam0+0x01) /* <200 */
#define drv_200 (drv_fam0+0x02) /* <201 */
#define drv_201 (drv_fam0+0x03) /* <210 */
#define drv_210 (drv_fam0+0x04) /* <211 */
#define drv_211 (drv_fam0+0x05) /* <300 */
#define drv_300 (drv_fam0+0x06) /* >=300 */
#define drv_fam1 0x0200 /* CR-56x family */
#define drv_099 (drv_fam1+0x01) /* <100 */
#define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */
#define drv_fam2 0x0400 /* CD200 family */
#define drv_famT 0x0800 /* TEAC CD-55A */
#define drv_famL 0x1000 /* Longshine family */
#define drv_260 (drv_famL+0x01) /* LCS-7260 */
#define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */
#define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */
#define drv_famV 0x2000 /* ECS-AT (vertos-100) family */
#define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */
#define fam0_drive (current_drive->drv_type&drv_fam0)
#define famL_drive (current_drive->drv_type&drv_famL)
#define famV_drive (current_drive->drv_type&drv_famV)
#define fam1_drive (current_drive->drv_type&drv_fam1)
#define fam2_drive (current_drive->drv_type&drv_fam2)
#define famT_drive (current_drive->drv_type&drv_famT)
#define fam0L_drive (current_drive->drv_type&(drv_fam0|drv_famL))
#define fam0V_drive (current_drive->drv_type&(drv_fam0|drv_famV))
#define famLV_drive (current_drive->drv_type&(drv_famL|drv_famV))
#define fam0LV_drive (current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
#define fam1L_drive (current_drive->drv_type&(drv_fam1|drv_famL))
#define fam1V_drive (current_drive->drv_type&(drv_fam1|drv_famV))
#define fam1LV_drive (current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
#define fam01_drive (current_drive->drv_type&(drv_fam0|drv_fam1))
#define fam12_drive (current_drive->drv_type&(drv_fam1|drv_fam2))
#define fam2T_drive (current_drive->drv_type&(drv_fam2|drv_famT))
/*
* audio states:
*/
#define audio_completed 3 /* Forgot this one! --AJK */
#define audio_playing 2
#define audio_pausing 1
/*
* drv_pattern, drv_options:
*/
#define speed_auto 0x80
#define speed_300 0x40
#define speed_150 0x20
#define audio_mono 0x04
/*
* values of cmd_type (0 else):
*/
#define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */
#define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */
#define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */
#define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */
/*
* sense_byte:
*
* values: 00
* 01
* 81
* 82 "raw audio" mode
* xx from infobuf[0] after 85 00 00 00 00 00 00
*/
/* audio status (bin) */
#define aud_00 0x00 /* Audio status byte not supported or not valid */
#define audx11 0x0b /* Audio play operation in progress */
#define audx12 0x0c /* Audio play operation paused */
#define audx13 0x0d /* Audio play operation successfully completed */
#define audx14 0x0e /* Audio play operation stopped due to error */
#define audx15 0x0f /* No current audio status to return */
/* audio status (bcd) */
#define aud_11 0x11 /* Audio play operation in progress */
#define aud_12 0x12 /* Audio play operation paused */
#define aud_13 0x13 /* Audio play operation successfully completed */
#define aud_14 0x14 /* Audio play operation stopped due to error */
#define aud_15 0x15 /* No current audio status to return */
/*
* highest allowed drive number (MINOR+1)
*/
#define NR_SBPCD 4
/*
* we try to never disable interrupts - seems to work
*/
#define SBPCD_DIS_IRQ 0
/*
* "write byte to port"
*/
#define OUT(x,y) outb(y,x)
/*==========================================================================*/
#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
#define MIXER_data SOUND_BASE+5 /* sound card's data register */
#define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
/*==========================================================================*/
#define MAX_TRACKS 99
#define ERR_DISKCHANGE 615
/*==========================================================================*/
/*
* To make conversions easier (machine dependent!)
*/
typedef union _msf
{
u_int n;
u_char c[4];
} MSF;
typedef union _blk
{
u_int n;
u_char c[4];
} BLK;
/*==========================================================================*/
/*============================================================================
==============================================================================
COMMAND SET of "old" drives like CR-521, CR-522
(the CR-562 family is different):
No. Command Code
--------------------------------------------
Drive Commands:
1 Seek 01
2 Read Data 02
3 Read XA-Data 03
4 Read Header 04
5 Spin Up 05
6 Spin Down 06
7 Diagnostic 07
8 Read UPC 08
9 Read ISRC 09
10 Play Audio 0A
11 Play Audio MSF 0B
12 Play Audio Track/Index 0C
Status Commands:
13 Read Status 81
14 Read Error 82
15 Read Drive Version 83
16 Mode Select 84
17 Mode Sense 85
18 Set XA Parameter 86
19 Read XA Parameter 87
20 Read Capacity 88
21 Read SUB_Q 89
22 Read Disc Code 8A
23 Read Disc Information 8B
24 Read TOC 8C
25 Pause/Resume 8D
26 Read Packet 8E
27 Read Path Check 00
all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
mnemo 7-byte command #bytes response (r0...rn)
________ ____________________ ____
Read Status:
status: 81. (1) one-byte command, gives the main
status byte
Read Error:
check1: 82 00 00 00 00 00 00. (6) r1: audio status
Read Packet:
check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating
to commands 01 04 05 07 08 09
Play Audio:
play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba),
nn-nn-nn: #blocks
Play Audio MSF:
0b mm-ss-ff mm-ss-ff (0) play audio from/to
Play Audio Track/Index:
0c ...
Pause/Resume:
pause: 8d pr 00 00 00 00 00. (0) pause (pr=00)
resume (pr=80) audio playing
Mode Select:
84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340
possibly defines transfer size
set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1)
le(vel): min=0, max=FF, else half
(firmware 2.11)
Mode Sense:
get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting
Read Disc Information:
tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format)
Read TOC:
tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn
(fl=0:"lba"-, =2:"msf-bin"-format)
Read Capacity:
capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity"
Read Path Check:
ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55
("ping" if the drive is connected)
Read Drive Version:
ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn"
(n.nn = 2.01, 2.11., 3.00, ...)
Seek:
seek: 01 00 ll-bb-aa 00 00. (0)
seek: 01 02 mm-ss-ff 00 00. (0)
Read Data:
read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes,
starting at block xx-xx-xx
fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
Read XA-Data:
read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes,
starting at block xx-xx-xx
fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
Read SUB_Q:
89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf,
fl=0: "lba", fl=2: "msf"
Read Disc Code:
8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info
Read Header:
04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2"
04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2"
Spin Up:
05 00 ll-bb-aa 00 00. (0) possibly implies a "seek"
Spin Down:
06 ...
Diagnostic:
07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2"
07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2"
Read UPC:
08 00 ll-bb-aa 00 00. (16)
08 02 mm-ss-ff 00 00. (16)
Read ISRC:
09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2"
09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2"
Set XA Parameter:
86 ...
Read XA Parameter:
87 ...
==============================================================================
============================================================================*/
/*
* commands
*
* CR-52x: CMD0_
* CR-56x: CMD1_
* CD200: CMD2_
* LCS-7260: CMDL_
* TEAC CD-55A: CMDT_
* ECS-AT: CMDV_
*/
#define CMD1_RESET 0x0a
#define CMD2_RESET 0x01
#define CMDT_RESET 0xc0
#define CMD1_LOCK_CTL 0x0c
#define CMD2_LOCK_CTL 0x1e
#define CMDT_LOCK_CTL CMD2_LOCK_CTL
#define CMDL_LOCK_CTL 0x0e
#define CMDV_LOCK_CTL CMDL_LOCK_CTL
#define CMD1_TRAY_CTL 0x07
#define CMD2_TRAY_CTL 0x1b
#define CMDT_TRAY_CTL CMD2_TRAY_CTL
#define CMDL_TRAY_CTL 0x0d
#define CMDV_TRAY_CTL CMDL_TRAY_CTL
#define CMD1_MULTISESS 0x8d
#define CMDL_MULTISESS 0x8c
#define CMDV_MULTISESS CMDL_MULTISESS
#define CMD1_SUBCHANINF 0x11
#define CMD2_SUBCHANINF 0x??
#define CMD1_ABORT 0x08
#define CMD2_ABORT 0x08
#define CMDT_ABORT 0x08
#define CMD2_x02 0x02
#define CMD2_SETSPEED 0xda
#define CMD0_PATH_CHECK 0x00
#define CMD1_PATH_CHECK 0x???
#define CMD2_PATH_CHECK 0x???
#define CMDT_PATH_CHECK 0x???
#define CMDL_PATH_CHECK CMD0_PATH_CHECK
#define CMDV_PATH_CHECK CMD0_PATH_CHECK
#define CMD0_SEEK 0x01
#define CMD1_SEEK CMD0_SEEK
#define CMD2_SEEK 0x2b
#define CMDT_SEEK CMD2_SEEK
#define CMDL_SEEK CMD0_SEEK
#define CMDV_SEEK CMD0_SEEK
#define CMD0_READ 0x02
#define CMD1_READ 0x10
#define CMD2_READ 0x28
#define CMDT_READ CMD2_READ
#define CMDL_READ CMD0_READ
#define CMDV_READ CMD0_READ
#define CMD0_READ_XA 0x03
#define CMD2_READ_XA 0xd4
#define CMD2_READ_XA2 0xd5
#define CMDL_READ_XA CMD0_READ_XA /* really ?? */
#define CMDV_READ_XA CMD0_READ_XA
#define CMD0_READ_HEAD 0x04
#define CMD0_SPINUP 0x05
#define CMD1_SPINUP 0x02
#define CMD2_SPINUP CMD2_TRAY_CTL
#define CMDL_SPINUP CMD0_SPINUP
#define CMDV_SPINUP CMD0_SPINUP
#define CMD0_SPINDOWN 0x06 /* really??? */
#define CMD1_SPINDOWN 0x06
#define CMD2_SPINDOWN CMD2_TRAY_CTL
#define CMDL_SPINDOWN 0x0d
#define CMDV_SPINDOWN CMD0_SPINDOWN
#define CMD0_DIAG 0x07
#define CMD0_READ_UPC 0x08
#define CMD1_READ_UPC 0x88
#define CMD2_READ_UPC 0x???
#define CMDL_READ_UPC CMD0_READ_UPC
#define CMDV_READ_UPC 0x8f
#define CMD0_READ_ISRC 0x09
#define CMD0_PLAY 0x0a
#define CMD1_PLAY 0x???
#define CMD2_PLAY 0x???
#define CMDL_PLAY CMD0_PLAY
#define CMDV_PLAY CMD0_PLAY
#define CMD0_PLAY_MSF 0x0b
#define CMD1_PLAY_MSF 0x0e
#define CMD2_PLAY_MSF 0x47
#define CMDT_PLAY_MSF CMD2_PLAY_MSF
#define CMDL_PLAY_MSF 0x???
#define CMD0_PLAY_TI 0x0c
#define CMD1_PLAY_TI 0x0f
#define CMD0_STATUS 0x81
#define CMD1_STATUS 0x05
#define CMD2_STATUS 0x00
#define CMDT_STATUS CMD2_STATUS
#define CMDL_STATUS CMD0_STATUS
#define CMDV_STATUS CMD0_STATUS
#define CMD2_SEEK_LEADIN 0x00
#define CMD0_READ_ERR 0x82
#define CMD1_READ_ERR CMD0_READ_ERR
#define CMD2_READ_ERR 0x03
#define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */
#define CMDL_READ_ERR CMD0_READ_ERR
#define CMDV_READ_ERR CMD0_READ_ERR
#define CMD0_READ_VER 0x83
#define CMD1_READ_VER CMD0_READ_VER
#define CMD2_READ_VER 0x12
#define CMDT_READ_VER CMD2_READ_VER /* really ?? */
#define CMDL_READ_VER CMD0_READ_VER
#define CMDV_READ_VER CMD0_READ_VER
#define CMD0_SETMODE 0x84
#define CMD1_SETMODE 0x09
#define CMD2_SETMODE 0x55
#define CMDT_SETMODE CMD2_SETMODE
#define CMDL_SETMODE CMD0_SETMODE
#define CMD0_GETMODE 0x85
#define CMD1_GETMODE 0x84
#define CMD2_GETMODE 0x5a
#define CMDT_GETMODE CMD2_GETMODE
#define CMDL_GETMODE CMD0_GETMODE
#define CMD0_SET_XA 0x86
#define CMD0_GET_XA 0x87
#define CMD0_CAPACITY 0x88
#define CMD1_CAPACITY 0x85
#define CMD2_CAPACITY 0x25
#define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */
#define CMD0_READSUBQ 0x89
#define CMD1_READSUBQ 0x87
#define CMD2_READSUBQ 0x42
#define CMDT_READSUBQ CMD2_READSUBQ
#define CMDL_READSUBQ CMD0_READSUBQ
#define CMDV_READSUBQ CMD0_READSUBQ
#define CMD0_DISKCODE 0x8a
#define CMD0_DISKINFO 0x8b
#define CMD1_DISKINFO CMD0_DISKINFO
#define CMD2_DISKINFO 0x43
#define CMDT_DISKINFO CMD2_DISKINFO
#define CMDL_DISKINFO CMD0_DISKINFO
#define CMDV_DISKINFO CMD0_DISKINFO
#define CMD0_READTOC 0x8c
#define CMD1_READTOC CMD0_READTOC
#define CMD2_READTOC 0x???
#define CMDL_READTOC CMD0_READTOC
#define CMDV_READTOC CMD0_READTOC
#define CMD0_PAU_RES 0x8d
#define CMD1_PAU_RES 0x0d
#define CMD2_PAU_RES 0x4b
#define CMDT_PAUSE CMD2_PAU_RES
#define CMDL_PAU_RES CMD0_PAU_RES
#define CMDV_PAUSE CMD0_PAU_RES
#define CMD0_PACKET 0x8e
#define CMD1_PACKET CMD0_PACKET
#define CMD2_PACKET 0x???
#define CMDL_PACKET CMD0_PACKET
#define CMDV_PACKET 0x???
/*==========================================================================*/
/*==========================================================================*/
#endif /* _LINUX_SBPCD_H */
/*==========================================================================*/
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only. This must remain at the end
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
* c-indent-level: 8
* c-brace-imaginary-offset: 0
* c-brace-offset: -8
* c-argdecl-indent: 8
* c-label-offset: -8
* c-continued-statement-offset: 8
* c-continued-brace-offset: 0
* End:
*/