1144 lines
28 KiB
C
1144 lines
28 KiB
C
/*
|
|
* NET3: Implementation of the ICMP protocol layer.
|
|
*
|
|
* Alan Cox, <alan@redhat.com>
|
|
*
|
|
* Version: $Id: icmp.c,v 1.85 2002/02/01 22:01:03 davem Exp $
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Some of the function names and the icmp unreach table for this
|
|
* module were derived from [icmp.c 1.0.11 06/02/93] by
|
|
* Ross Biro, Fred N. van Kempen, Mark Evans, Alan Cox, Gerhard Koerting.
|
|
* Other than that this module is a complete rewrite.
|
|
*
|
|
* Fixes:
|
|
* Clemens Fruhwirth : introduce global icmp rate limiting
|
|
* with icmp type masking ability instead
|
|
* of broken per type icmp timeouts.
|
|
* Mike Shaver : RFC1122 checks.
|
|
* Alan Cox : Multicast ping reply as self.
|
|
* Alan Cox : Fix atomicity lockup in ip_build_xmit
|
|
* call.
|
|
* Alan Cox : Added 216,128 byte paths to the MTU
|
|
* code.
|
|
* Martin Mares : RFC1812 checks.
|
|
* Martin Mares : Can be configured to follow redirects
|
|
* if acting as a router _without_ a
|
|
* routing protocol (RFC 1812).
|
|
* Martin Mares : Echo requests may be configured to
|
|
* be ignored (RFC 1812).
|
|
* Martin Mares : Limitation of ICMP error message
|
|
* transmit rate (RFC 1812).
|
|
* Martin Mares : TOS and Precedence set correctly
|
|
* (RFC 1812).
|
|
* Martin Mares : Now copying as much data from the
|
|
* original packet as we can without
|
|
* exceeding 576 bytes (RFC 1812).
|
|
* Willy Konynenberg : Transparent proxying support.
|
|
* Keith Owens : RFC1191 correction for 4.2BSD based
|
|
* path MTU bug.
|
|
* Thomas Quinot : ICMP Dest Unreach codes up to 15 are
|
|
* valid (RFC 1812).
|
|
* Andi Kleen : Check all packet lengths properly
|
|
* and moved all kfree_skb() up to
|
|
* icmp_rcv.
|
|
* Andi Kleen : Move the rate limit bookkeeping
|
|
* into the dest entry and use a token
|
|
* bucket filter (thanks to ANK). Make
|
|
* the rates sysctl configurable.
|
|
* Yu Tianli : Fixed two ugly bugs in icmp_send
|
|
* - IP option length was accounted wrongly
|
|
* - ICMP header length was not accounted
|
|
* at all.
|
|
* Tristan Greaves : Added sysctl option to ignore bogus
|
|
* broadcast responses from broken routers.
|
|
*
|
|
* To Fix:
|
|
*
|
|
* - Should use skb_pull() instead of all the manual checking.
|
|
* This would also greatly simply some upper layer error handlers. --AK
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/socket.h>
|
|
#include <linux/in.h>
|
|
#include <linux/inet.h>
|
|
#include <linux/inetdevice.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/string.h>
|
|
#include <linux/netfilter_ipv4.h>
|
|
#include <net/snmp.h>
|
|
#include <net/ip.h>
|
|
#include <net/route.h>
|
|
#include <net/protocol.h>
|
|
#include <net/icmp.h>
|
|
#include <net/tcp.h>
|
|
#include <net/udp.h>
|
|
#include <net/raw.h>
|
|
#include <linux/skbuff.h>
|
|
#include <net/sock.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/init.h>
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
#include <net/checksum.h>
|
|
|
|
/*
|
|
* Build xmit assembly blocks
|
|
*/
|
|
|
|
struct icmp_bxm {
|
|
struct sk_buff *skb;
|
|
int offset;
|
|
int data_len;
|
|
|
|
struct {
|
|
struct icmphdr icmph;
|
|
__be32 times[3];
|
|
} data;
|
|
int head_len;
|
|
struct ip_options replyopts;
|
|
unsigned char optbuf[40];
|
|
};
|
|
|
|
/*
|
|
* Statistics
|
|
*/
|
|
DEFINE_SNMP_STAT(struct icmp_mib, icmp_statistics) __read_mostly;
|
|
|
|
/* An array of errno for error messages from dest unreach. */
|
|
/* RFC 1122: 3.2.2.1 States that NET_UNREACH, HOST_UNREACH and SR_FAILED MUST be considered 'transient errs'. */
|
|
|
|
struct icmp_err icmp_err_convert[] = {
|
|
{
|
|
.errno = ENETUNREACH, /* ICMP_NET_UNREACH */
|
|
.fatal = 0,
|
|
},
|
|
{
|
|
.errno = EHOSTUNREACH, /* ICMP_HOST_UNREACH */
|
|
.fatal = 0,
|
|
},
|
|
{
|
|
.errno = ENOPROTOOPT /* ICMP_PROT_UNREACH */,
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = ECONNREFUSED, /* ICMP_PORT_UNREACH */
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = EMSGSIZE, /* ICMP_FRAG_NEEDED */
|
|
.fatal = 0,
|
|
},
|
|
{
|
|
.errno = EOPNOTSUPP, /* ICMP_SR_FAILED */
|
|
.fatal = 0,
|
|
},
|
|
{
|
|
.errno = ENETUNREACH, /* ICMP_NET_UNKNOWN */
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = EHOSTDOWN, /* ICMP_HOST_UNKNOWN */
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = ENONET, /* ICMP_HOST_ISOLATED */
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = ENETUNREACH, /* ICMP_NET_ANO */
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = EHOSTUNREACH, /* ICMP_HOST_ANO */
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = ENETUNREACH, /* ICMP_NET_UNR_TOS */
|
|
.fatal = 0,
|
|
},
|
|
{
|
|
.errno = EHOSTUNREACH, /* ICMP_HOST_UNR_TOS */
|
|
.fatal = 0,
|
|
},
|
|
{
|
|
.errno = EHOSTUNREACH, /* ICMP_PKT_FILTERED */
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = EHOSTUNREACH, /* ICMP_PREC_VIOLATION */
|
|
.fatal = 1,
|
|
},
|
|
{
|
|
.errno = EHOSTUNREACH, /* ICMP_PREC_CUTOFF */
|
|
.fatal = 1,
|
|
},
|
|
};
|
|
|
|
/* Control parameters for ECHO replies. */
|
|
int sysctl_icmp_echo_ignore_all __read_mostly;
|
|
int sysctl_icmp_echo_ignore_broadcasts __read_mostly = 1;
|
|
|
|
/* Control parameter - ignore bogus broadcast responses? */
|
|
int sysctl_icmp_ignore_bogus_error_responses __read_mostly = 1;
|
|
|
|
/*
|
|
* Configurable global rate limit.
|
|
*
|
|
* ratelimit defines tokens/packet consumed for dst->rate_token bucket
|
|
* ratemask defines which icmp types are ratelimited by setting
|
|
* it's bit position.
|
|
*
|
|
* default:
|
|
* dest unreachable (3), source quench (4),
|
|
* time exceeded (11), parameter problem (12)
|
|
*/
|
|
|
|
int sysctl_icmp_ratelimit __read_mostly = 1 * HZ;
|
|
int sysctl_icmp_ratemask __read_mostly = 0x1818;
|
|
int sysctl_icmp_errors_use_inbound_ifaddr __read_mostly;
|
|
|
|
/*
|
|
* ICMP control array. This specifies what to do with each ICMP.
|
|
*/
|
|
|
|
struct icmp_control {
|
|
int output_entry; /* Field for increment on output */
|
|
int input_entry; /* Field for increment on input */
|
|
void (*handler)(struct sk_buff *skb);
|
|
short error; /* This ICMP is classed as an error message */
|
|
};
|
|
|
|
static const struct icmp_control icmp_pointers[NR_ICMP_TYPES+1];
|
|
|
|
/*
|
|
* The ICMP socket(s). This is the most convenient way to flow control
|
|
* our ICMP output as well as maintain a clean interface throughout
|
|
* all layers. All Socketless IP sends will soon be gone.
|
|
*
|
|
* On SMP we have one ICMP socket per-cpu.
|
|
*/
|
|
static DEFINE_PER_CPU(struct socket *, __icmp_socket) = NULL;
|
|
#define icmp_socket __get_cpu_var(__icmp_socket)
|
|
|
|
static __inline__ int icmp_xmit_lock(void)
|
|
{
|
|
local_bh_disable();
|
|
|
|
if (unlikely(!spin_trylock(&icmp_socket->sk->sk_lock.slock))) {
|
|
/* This can happen if the output path signals a
|
|
* dst_link_failure() for an outgoing ICMP packet.
|
|
*/
|
|
local_bh_enable();
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void icmp_xmit_unlock(void)
|
|
{
|
|
spin_unlock_bh(&icmp_socket->sk->sk_lock.slock);
|
|
}
|
|
|
|
/*
|
|
* Send an ICMP frame.
|
|
*/
|
|
|
|
/*
|
|
* Check transmit rate limitation for given message.
|
|
* The rate information is held in the destination cache now.
|
|
* This function is generic and could be used for other purposes
|
|
* too. It uses a Token bucket filter as suggested by Alexey Kuznetsov.
|
|
*
|
|
* Note that the same dst_entry fields are modified by functions in
|
|
* route.c too, but these work for packet destinations while xrlim_allow
|
|
* works for icmp destinations. This means the rate limiting information
|
|
* for one "ip object" is shared - and these ICMPs are twice limited:
|
|
* by source and by destination.
|
|
*
|
|
* RFC 1812: 4.3.2.8 SHOULD be able to limit error message rate
|
|
* SHOULD allow setting of rate limits
|
|
*
|
|
* Shared between ICMPv4 and ICMPv6.
|
|
*/
|
|
#define XRLIM_BURST_FACTOR 6
|
|
int xrlim_allow(struct dst_entry *dst, int timeout)
|
|
{
|
|
unsigned long now;
|
|
int rc = 0;
|
|
|
|
now = jiffies;
|
|
dst->rate_tokens += now - dst->rate_last;
|
|
dst->rate_last = now;
|
|
if (dst->rate_tokens > XRLIM_BURST_FACTOR * timeout)
|
|
dst->rate_tokens = XRLIM_BURST_FACTOR * timeout;
|
|
if (dst->rate_tokens >= timeout) {
|
|
dst->rate_tokens -= timeout;
|
|
rc = 1;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static inline int icmpv4_xrlim_allow(struct rtable *rt, int type, int code)
|
|
{
|
|
struct dst_entry *dst = &rt->u.dst;
|
|
int rc = 1;
|
|
|
|
if (type > NR_ICMP_TYPES)
|
|
goto out;
|
|
|
|
/* Don't limit PMTU discovery. */
|
|
if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED)
|
|
goto out;
|
|
|
|
/* No rate limit on loopback */
|
|
if (dst->dev && (dst->dev->flags&IFF_LOOPBACK))
|
|
goto out;
|
|
|
|
/* Limit if icmp type is enabled in ratemask. */
|
|
if ((1 << type) & sysctl_icmp_ratemask)
|
|
rc = xrlim_allow(dst, sysctl_icmp_ratelimit);
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Maintain the counters used in the SNMP statistics for outgoing ICMP
|
|
*/
|
|
static void icmp_out_count(int type)
|
|
{
|
|
if (type <= NR_ICMP_TYPES) {
|
|
ICMP_INC_STATS(icmp_pointers[type].output_entry);
|
|
ICMP_INC_STATS(ICMP_MIB_OUTMSGS);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Checksum each fragment, and on the first include the headers and final
|
|
* checksum.
|
|
*/
|
|
static int icmp_glue_bits(void *from, char *to, int offset, int len, int odd,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct icmp_bxm *icmp_param = (struct icmp_bxm *)from;
|
|
__wsum csum;
|
|
|
|
csum = skb_copy_and_csum_bits(icmp_param->skb,
|
|
icmp_param->offset + offset,
|
|
to, len, 0);
|
|
|
|
skb->csum = csum_block_add(skb->csum, csum, odd);
|
|
if (icmp_pointers[icmp_param->data.icmph.type].error)
|
|
nf_ct_attach(skb, icmp_param->skb);
|
|
return 0;
|
|
}
|
|
|
|
static void icmp_push_reply(struct icmp_bxm *icmp_param,
|
|
struct ipcm_cookie *ipc, struct rtable *rt)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
if (ip_append_data(icmp_socket->sk, icmp_glue_bits, icmp_param,
|
|
icmp_param->data_len+icmp_param->head_len,
|
|
icmp_param->head_len,
|
|
ipc, rt, MSG_DONTWAIT) < 0)
|
|
ip_flush_pending_frames(icmp_socket->sk);
|
|
else if ((skb = skb_peek(&icmp_socket->sk->sk_write_queue)) != NULL) {
|
|
struct icmphdr *icmph = icmp_hdr(skb);
|
|
__wsum csum = 0;
|
|
struct sk_buff *skb1;
|
|
|
|
skb_queue_walk(&icmp_socket->sk->sk_write_queue, skb1) {
|
|
csum = csum_add(csum, skb1->csum);
|
|
}
|
|
csum = csum_partial_copy_nocheck((void *)&icmp_param->data,
|
|
(char *)icmph,
|
|
icmp_param->head_len, csum);
|
|
icmph->checksum = csum_fold(csum);
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
ip_push_pending_frames(icmp_socket->sk);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Driving logic for building and sending ICMP messages.
|
|
*/
|
|
|
|
static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
|
|
{
|
|
struct sock *sk = icmp_socket->sk;
|
|
struct inet_sock *inet = inet_sk(sk);
|
|
struct ipcm_cookie ipc;
|
|
struct rtable *rt = (struct rtable *)skb->dst;
|
|
__be32 daddr;
|
|
|
|
if (ip_options_echo(&icmp_param->replyopts, skb))
|
|
return;
|
|
|
|
if (icmp_xmit_lock())
|
|
return;
|
|
|
|
icmp_param->data.icmph.checksum = 0;
|
|
icmp_out_count(icmp_param->data.icmph.type);
|
|
|
|
inet->tos = ip_hdr(skb)->tos;
|
|
daddr = ipc.addr = rt->rt_src;
|
|
ipc.opt = NULL;
|
|
if (icmp_param->replyopts.optlen) {
|
|
ipc.opt = &icmp_param->replyopts;
|
|
if (ipc.opt->srr)
|
|
daddr = icmp_param->replyopts.faddr;
|
|
}
|
|
{
|
|
struct flowi fl = { .nl_u = { .ip4_u =
|
|
{ .daddr = daddr,
|
|
.saddr = rt->rt_spec_dst,
|
|
.tos = RT_TOS(ip_hdr(skb)->tos) } },
|
|
.proto = IPPROTO_ICMP };
|
|
security_skb_classify_flow(skb, &fl);
|
|
if (ip_route_output_key(&rt, &fl))
|
|
goto out_unlock;
|
|
}
|
|
if (icmpv4_xrlim_allow(rt, icmp_param->data.icmph.type,
|
|
icmp_param->data.icmph.code))
|
|
icmp_push_reply(icmp_param, &ipc, rt);
|
|
ip_rt_put(rt);
|
|
out_unlock:
|
|
icmp_xmit_unlock();
|
|
}
|
|
|
|
|
|
/*
|
|
* Send an ICMP message in response to a situation
|
|
*
|
|
* RFC 1122: 3.2.2 MUST send at least the IP header and 8 bytes of header.
|
|
* MAY send more (we do).
|
|
* MUST NOT change this header information.
|
|
* MUST NOT reply to a multicast/broadcast IP address.
|
|
* MUST NOT reply to a multicast/broadcast MAC address.
|
|
* MUST reply to only the first fragment.
|
|
*/
|
|
|
|
void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
|
|
{
|
|
struct iphdr *iph;
|
|
int room;
|
|
struct icmp_bxm icmp_param;
|
|
struct rtable *rt = (struct rtable *)skb_in->dst;
|
|
struct ipcm_cookie ipc;
|
|
__be32 saddr;
|
|
u8 tos;
|
|
|
|
if (!rt)
|
|
goto out;
|
|
|
|
/*
|
|
* Find the original header. It is expected to be valid, of course.
|
|
* Check this, icmp_send is called from the most obscure devices
|
|
* sometimes.
|
|
*/
|
|
iph = ip_hdr(skb_in);
|
|
|
|
if ((u8 *)iph < skb_in->head ||
|
|
(skb_in->network_header + sizeof(*iph)) > skb_in->tail)
|
|
goto out;
|
|
|
|
/*
|
|
* No replies to physical multicast/broadcast
|
|
*/
|
|
if (skb_in->pkt_type != PACKET_HOST)
|
|
goto out;
|
|
|
|
/*
|
|
* Now check at the protocol level
|
|
*/
|
|
if (rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
|
|
goto out;
|
|
|
|
/*
|
|
* Only reply to fragment 0. We byte re-order the constant
|
|
* mask for efficiency.
|
|
*/
|
|
if (iph->frag_off & htons(IP_OFFSET))
|
|
goto out;
|
|
|
|
/*
|
|
* If we send an ICMP error to an ICMP error a mess would result..
|
|
*/
|
|
if (icmp_pointers[type].error) {
|
|
/*
|
|
* We are an error, check if we are replying to an
|
|
* ICMP error
|
|
*/
|
|
if (iph->protocol == IPPROTO_ICMP) {
|
|
u8 _inner_type, *itp;
|
|
|
|
itp = skb_header_pointer(skb_in,
|
|
skb_network_header(skb_in) +
|
|
(iph->ihl << 2) +
|
|
offsetof(struct icmphdr,
|
|
type) -
|
|
skb_in->data,
|
|
sizeof(_inner_type),
|
|
&_inner_type);
|
|
if (itp == NULL)
|
|
goto out;
|
|
|
|
/*
|
|
* Assume any unknown ICMP type is an error. This
|
|
* isn't specified by the RFC, but think about it..
|
|
*/
|
|
if (*itp > NR_ICMP_TYPES ||
|
|
icmp_pointers[*itp].error)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (icmp_xmit_lock())
|
|
return;
|
|
|
|
/*
|
|
* Construct source address and options.
|
|
*/
|
|
|
|
saddr = iph->daddr;
|
|
if (!(rt->rt_flags & RTCF_LOCAL)) {
|
|
if (sysctl_icmp_errors_use_inbound_ifaddr)
|
|
saddr = inet_select_addr(skb_in->dev, 0, RT_SCOPE_LINK);
|
|
else
|
|
saddr = 0;
|
|
}
|
|
|
|
tos = icmp_pointers[type].error ? ((iph->tos & IPTOS_TOS_MASK) |
|
|
IPTOS_PREC_INTERNETCONTROL) :
|
|
iph->tos;
|
|
|
|
if (ip_options_echo(&icmp_param.replyopts, skb_in))
|
|
goto out_unlock;
|
|
|
|
|
|
/*
|
|
* Prepare data for ICMP header.
|
|
*/
|
|
|
|
icmp_param.data.icmph.type = type;
|
|
icmp_param.data.icmph.code = code;
|
|
icmp_param.data.icmph.un.gateway = info;
|
|
icmp_param.data.icmph.checksum = 0;
|
|
icmp_param.skb = skb_in;
|
|
icmp_param.offset = skb_network_offset(skb_in);
|
|
icmp_out_count(icmp_param.data.icmph.type);
|
|
inet_sk(icmp_socket->sk)->tos = tos;
|
|
ipc.addr = iph->saddr;
|
|
ipc.opt = &icmp_param.replyopts;
|
|
|
|
{
|
|
struct flowi fl = {
|
|
.nl_u = {
|
|
.ip4_u = {
|
|
.daddr = icmp_param.replyopts.srr ?
|
|
icmp_param.replyopts.faddr :
|
|
iph->saddr,
|
|
.saddr = saddr,
|
|
.tos = RT_TOS(tos)
|
|
}
|
|
},
|
|
.proto = IPPROTO_ICMP,
|
|
.uli_u = {
|
|
.icmpt = {
|
|
.type = type,
|
|
.code = code
|
|
}
|
|
}
|
|
};
|
|
security_skb_classify_flow(skb_in, &fl);
|
|
if (ip_route_output_key(&rt, &fl))
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (!icmpv4_xrlim_allow(rt, type, code))
|
|
goto ende;
|
|
|
|
/* RFC says return as much as we can without exceeding 576 bytes. */
|
|
|
|
room = dst_mtu(&rt->u.dst);
|
|
if (room > 576)
|
|
room = 576;
|
|
room -= sizeof(struct iphdr) + icmp_param.replyopts.optlen;
|
|
room -= sizeof(struct icmphdr);
|
|
|
|
icmp_param.data_len = skb_in->len - icmp_param.offset;
|
|
if (icmp_param.data_len > room)
|
|
icmp_param.data_len = room;
|
|
icmp_param.head_len = sizeof(struct icmphdr);
|
|
|
|
icmp_push_reply(&icmp_param, &ipc, rt);
|
|
ende:
|
|
ip_rt_put(rt);
|
|
out_unlock:
|
|
icmp_xmit_unlock();
|
|
out:;
|
|
}
|
|
|
|
|
|
/*
|
|
* Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEED, and ICMP_QUENCH.
|
|
*/
|
|
|
|
static void icmp_unreach(struct sk_buff *skb)
|
|
{
|
|
struct iphdr *iph;
|
|
struct icmphdr *icmph;
|
|
int hash, protocol;
|
|
struct net_protocol *ipprot;
|
|
struct sock *raw_sk;
|
|
u32 info = 0;
|
|
|
|
/*
|
|
* Incomplete header ?
|
|
* Only checks for the IP header, there should be an
|
|
* additional check for longer headers in upper levels.
|
|
*/
|
|
|
|
if (!pskb_may_pull(skb, sizeof(struct iphdr)))
|
|
goto out_err;
|
|
|
|
icmph = icmp_hdr(skb);
|
|
iph = (struct iphdr *)skb->data;
|
|
|
|
if (iph->ihl < 5) /* Mangled header, drop. */
|
|
goto out_err;
|
|
|
|
if (icmph->type == ICMP_DEST_UNREACH) {
|
|
switch (icmph->code & 15) {
|
|
case ICMP_NET_UNREACH:
|
|
case ICMP_HOST_UNREACH:
|
|
case ICMP_PROT_UNREACH:
|
|
case ICMP_PORT_UNREACH:
|
|
break;
|
|
case ICMP_FRAG_NEEDED:
|
|
if (ipv4_config.no_pmtu_disc) {
|
|
LIMIT_NETDEBUG(KERN_INFO "ICMP: %u.%u.%u.%u: "
|
|
"fragmentation needed "
|
|
"and DF set.\n",
|
|
NIPQUAD(iph->daddr));
|
|
} else {
|
|
info = ip_rt_frag_needed(iph,
|
|
ntohs(icmph->un.frag.mtu));
|
|
if (!info)
|
|
goto out;
|
|
}
|
|
break;
|
|
case ICMP_SR_FAILED:
|
|
LIMIT_NETDEBUG(KERN_INFO "ICMP: %u.%u.%u.%u: Source "
|
|
"Route Failed.\n",
|
|
NIPQUAD(iph->daddr));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
if (icmph->code > NR_ICMP_UNREACH)
|
|
goto out;
|
|
} else if (icmph->type == ICMP_PARAMETERPROB)
|
|
info = ntohl(icmph->un.gateway) >> 24;
|
|
|
|
/*
|
|
* Throw it at our lower layers
|
|
*
|
|
* RFC 1122: 3.2.2 MUST extract the protocol ID from the passed
|
|
* header.
|
|
* RFC 1122: 3.2.2.1 MUST pass ICMP unreach messages to the
|
|
* transport layer.
|
|
* RFC 1122: 3.2.2.2 MUST pass ICMP time expired messages to
|
|
* transport layer.
|
|
*/
|
|
|
|
/*
|
|
* Check the other end isnt violating RFC 1122. Some routers send
|
|
* bogus responses to broadcast frames. If you see this message
|
|
* first check your netmask matches at both ends, if it does then
|
|
* get the other vendor to fix their kit.
|
|
*/
|
|
|
|
if (!sysctl_icmp_ignore_bogus_error_responses &&
|
|
inet_addr_type(iph->daddr) == RTN_BROADCAST) {
|
|
if (net_ratelimit())
|
|
printk(KERN_WARNING "%u.%u.%u.%u sent an invalid ICMP "
|
|
"type %u, code %u "
|
|
"error to a broadcast: %u.%u.%u.%u on %s\n",
|
|
NIPQUAD(ip_hdr(skb)->saddr),
|
|
icmph->type, icmph->code,
|
|
NIPQUAD(iph->daddr),
|
|
skb->dev->name);
|
|
goto out;
|
|
}
|
|
|
|
/* Checkin full IP header plus 8 bytes of protocol to
|
|
* avoid additional coding at protocol handlers.
|
|
*/
|
|
if (!pskb_may_pull(skb, iph->ihl * 4 + 8))
|
|
goto out;
|
|
|
|
iph = (struct iphdr *)skb->data;
|
|
protocol = iph->protocol;
|
|
|
|
/*
|
|
* Deliver ICMP message to raw sockets. Pretty useless feature?
|
|
*/
|
|
|
|
/* Note: See raw.c and net/raw.h, RAWV4_HTABLE_SIZE==MAX_INET_PROTOS */
|
|
hash = protocol & (MAX_INET_PROTOS - 1);
|
|
read_lock(&raw_v4_lock);
|
|
if ((raw_sk = sk_head(&raw_v4_htable[hash])) != NULL) {
|
|
while ((raw_sk = __raw_v4_lookup(raw_sk, protocol, iph->daddr,
|
|
iph->saddr,
|
|
skb->dev->ifindex)) != NULL) {
|
|
raw_err(raw_sk, skb, info);
|
|
raw_sk = sk_next(raw_sk);
|
|
iph = (struct iphdr *)skb->data;
|
|
}
|
|
}
|
|
read_unlock(&raw_v4_lock);
|
|
|
|
rcu_read_lock();
|
|
ipprot = rcu_dereference(inet_protos[hash]);
|
|
if (ipprot && ipprot->err_handler)
|
|
ipprot->err_handler(skb, info);
|
|
rcu_read_unlock();
|
|
|
|
out:
|
|
return;
|
|
out_err:
|
|
ICMP_INC_STATS_BH(ICMP_MIB_INERRORS);
|
|
goto out;
|
|
}
|
|
|
|
|
|
/*
|
|
* Handle ICMP_REDIRECT.
|
|
*/
|
|
|
|
static void icmp_redirect(struct sk_buff *skb)
|
|
{
|
|
struct iphdr *iph;
|
|
|
|
if (skb->len < sizeof(struct iphdr))
|
|
goto out_err;
|
|
|
|
/*
|
|
* Get the copied header of the packet that caused the redirect
|
|
*/
|
|
if (!pskb_may_pull(skb, sizeof(struct iphdr)))
|
|
goto out;
|
|
|
|
iph = (struct iphdr *)skb->data;
|
|
|
|
switch (icmp_hdr(skb)->code & 7) {
|
|
case ICMP_REDIR_NET:
|
|
case ICMP_REDIR_NETTOS:
|
|
/*
|
|
* As per RFC recommendations now handle it as a host redirect.
|
|
*/
|
|
case ICMP_REDIR_HOST:
|
|
case ICMP_REDIR_HOSTTOS:
|
|
ip_rt_redirect(ip_hdr(skb)->saddr, iph->daddr,
|
|
icmp_hdr(skb)->un.gateway,
|
|
iph->saddr, skb->dev);
|
|
break;
|
|
}
|
|
out:
|
|
return;
|
|
out_err:
|
|
ICMP_INC_STATS_BH(ICMP_MIB_INERRORS);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Handle ICMP_ECHO ("ping") requests.
|
|
*
|
|
* RFC 1122: 3.2.2.6 MUST have an echo server that answers ICMP echo
|
|
* requests.
|
|
* RFC 1122: 3.2.2.6 Data received in the ICMP_ECHO request MUST be
|
|
* included in the reply.
|
|
* RFC 1812: 4.3.3.6 SHOULD have a config option for silently ignoring
|
|
* echo requests, MUST have default=NOT.
|
|
* See also WRT handling of options once they are done and working.
|
|
*/
|
|
|
|
static void icmp_echo(struct sk_buff *skb)
|
|
{
|
|
if (!sysctl_icmp_echo_ignore_all) {
|
|
struct icmp_bxm icmp_param;
|
|
|
|
icmp_param.data.icmph = *icmp_hdr(skb);
|
|
icmp_param.data.icmph.type = ICMP_ECHOREPLY;
|
|
icmp_param.skb = skb;
|
|
icmp_param.offset = 0;
|
|
icmp_param.data_len = skb->len;
|
|
icmp_param.head_len = sizeof(struct icmphdr);
|
|
icmp_reply(&icmp_param, skb);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle ICMP Timestamp requests.
|
|
* RFC 1122: 3.2.2.8 MAY implement ICMP timestamp requests.
|
|
* SHOULD be in the kernel for minimum random latency.
|
|
* MUST be accurate to a few minutes.
|
|
* MUST be updated at least at 15Hz.
|
|
*/
|
|
static void icmp_timestamp(struct sk_buff *skb)
|
|
{
|
|
struct timeval tv;
|
|
struct icmp_bxm icmp_param;
|
|
/*
|
|
* Too short.
|
|
*/
|
|
if (skb->len < 4)
|
|
goto out_err;
|
|
|
|
/*
|
|
* Fill in the current time as ms since midnight UT:
|
|
*/
|
|
do_gettimeofday(&tv);
|
|
icmp_param.data.times[1] = htonl((tv.tv_sec % 86400) * 1000 +
|
|
tv.tv_usec / 1000);
|
|
icmp_param.data.times[2] = icmp_param.data.times[1];
|
|
if (skb_copy_bits(skb, 0, &icmp_param.data.times[0], 4))
|
|
BUG();
|
|
icmp_param.data.icmph = *icmp_hdr(skb);
|
|
icmp_param.data.icmph.type = ICMP_TIMESTAMPREPLY;
|
|
icmp_param.data.icmph.code = 0;
|
|
icmp_param.skb = skb;
|
|
icmp_param.offset = 0;
|
|
icmp_param.data_len = 0;
|
|
icmp_param.head_len = sizeof(struct icmphdr) + 12;
|
|
icmp_reply(&icmp_param, skb);
|
|
out:
|
|
return;
|
|
out_err:
|
|
ICMP_INC_STATS_BH(ICMP_MIB_INERRORS);
|
|
goto out;
|
|
}
|
|
|
|
|
|
/*
|
|
* Handle ICMP_ADDRESS_MASK requests. (RFC950)
|
|
*
|
|
* RFC1122 (3.2.2.9). A host MUST only send replies to
|
|
* ADDRESS_MASK requests if it's been configured as an address mask
|
|
* agent. Receiving a request doesn't constitute implicit permission to
|
|
* act as one. Of course, implementing this correctly requires (SHOULD)
|
|
* a way to turn the functionality on and off. Another one for sysctl(),
|
|
* I guess. -- MS
|
|
*
|
|
* RFC1812 (4.3.3.9). A router MUST implement it.
|
|
* A router SHOULD have switch turning it on/off.
|
|
* This switch MUST be ON by default.
|
|
*
|
|
* Gratuitous replies, zero-source replies are not implemented,
|
|
* that complies with RFC. DO NOT implement them!!! All the idea
|
|
* of broadcast addrmask replies as specified in RFC950 is broken.
|
|
* The problem is that it is not uncommon to have several prefixes
|
|
* on one physical interface. Moreover, addrmask agent can even be
|
|
* not aware of existing another prefixes.
|
|
* If source is zero, addrmask agent cannot choose correct prefix.
|
|
* Gratuitous mask announcements suffer from the same problem.
|
|
* RFC1812 explains it, but still allows to use ADDRMASK,
|
|
* that is pretty silly. --ANK
|
|
*
|
|
* All these rules are so bizarre, that I removed kernel addrmask
|
|
* support at all. It is wrong, it is obsolete, nobody uses it in
|
|
* any case. --ANK
|
|
*
|
|
* Furthermore you can do it with a usermode address agent program
|
|
* anyway...
|
|
*/
|
|
|
|
static void icmp_address(struct sk_buff *skb)
|
|
{
|
|
#if 0
|
|
if (net_ratelimit())
|
|
printk(KERN_DEBUG "a guy asks for address mask. Who is it?\n");
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* RFC1812 (4.3.3.9). A router SHOULD listen all replies, and complain
|
|
* loudly if an inconsistency is found.
|
|
*/
|
|
|
|
static void icmp_address_reply(struct sk_buff *skb)
|
|
{
|
|
struct rtable *rt = (struct rtable *)skb->dst;
|
|
struct net_device *dev = skb->dev;
|
|
struct in_device *in_dev;
|
|
struct in_ifaddr *ifa;
|
|
|
|
if (skb->len < 4 || !(rt->rt_flags&RTCF_DIRECTSRC))
|
|
goto out;
|
|
|
|
in_dev = in_dev_get(dev);
|
|
if (!in_dev)
|
|
goto out;
|
|
rcu_read_lock();
|
|
if (in_dev->ifa_list &&
|
|
IN_DEV_LOG_MARTIANS(in_dev) &&
|
|
IN_DEV_FORWARD(in_dev)) {
|
|
__be32 _mask, *mp;
|
|
|
|
mp = skb_header_pointer(skb, 0, sizeof(_mask), &_mask);
|
|
BUG_ON(mp == NULL);
|
|
for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
|
|
if (*mp == ifa->ifa_mask &&
|
|
inet_ifa_match(rt->rt_src, ifa))
|
|
break;
|
|
}
|
|
if (!ifa && net_ratelimit()) {
|
|
printk(KERN_INFO "Wrong address mask %u.%u.%u.%u from "
|
|
"%s/%u.%u.%u.%u\n",
|
|
NIPQUAD(*mp), dev->name, NIPQUAD(rt->rt_src));
|
|
}
|
|
}
|
|
rcu_read_unlock();
|
|
in_dev_put(in_dev);
|
|
out:;
|
|
}
|
|
|
|
static void icmp_discard(struct sk_buff *skb)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Deal with incoming ICMP packets.
|
|
*/
|
|
int icmp_rcv(struct sk_buff *skb)
|
|
{
|
|
struct icmphdr *icmph;
|
|
struct rtable *rt = (struct rtable *)skb->dst;
|
|
|
|
ICMP_INC_STATS_BH(ICMP_MIB_INMSGS);
|
|
|
|
switch (skb->ip_summed) {
|
|
case CHECKSUM_COMPLETE:
|
|
if (!csum_fold(skb->csum))
|
|
break;
|
|
/* fall through */
|
|
case CHECKSUM_NONE:
|
|
skb->csum = 0;
|
|
if (__skb_checksum_complete(skb))
|
|
goto error;
|
|
}
|
|
|
|
if (!pskb_pull(skb, sizeof(struct icmphdr)))
|
|
goto error;
|
|
|
|
icmph = icmp_hdr(skb);
|
|
|
|
/*
|
|
* 18 is the highest 'known' ICMP type. Anything else is a mystery
|
|
*
|
|
* RFC 1122: 3.2.2 Unknown ICMP messages types MUST be silently
|
|
* discarded.
|
|
*/
|
|
if (icmph->type > NR_ICMP_TYPES)
|
|
goto error;
|
|
|
|
|
|
/*
|
|
* Parse the ICMP message
|
|
*/
|
|
|
|
if (rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST)) {
|
|
/*
|
|
* RFC 1122: 3.2.2.6 An ICMP_ECHO to broadcast MAY be
|
|
* silently ignored (we let user decide with a sysctl).
|
|
* RFC 1122: 3.2.2.8 An ICMP_TIMESTAMP MAY be silently
|
|
* discarded if to broadcast/multicast.
|
|
*/
|
|
if ((icmph->type == ICMP_ECHO ||
|
|
icmph->type == ICMP_TIMESTAMP) &&
|
|
sysctl_icmp_echo_ignore_broadcasts) {
|
|
goto error;
|
|
}
|
|
if (icmph->type != ICMP_ECHO &&
|
|
icmph->type != ICMP_TIMESTAMP &&
|
|
icmph->type != ICMP_ADDRESS &&
|
|
icmph->type != ICMP_ADDRESSREPLY) {
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
ICMP_INC_STATS_BH(icmp_pointers[icmph->type].input_entry);
|
|
icmp_pointers[icmph->type].handler(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return 0;
|
|
error:
|
|
ICMP_INC_STATS_BH(ICMP_MIB_INERRORS);
|
|
goto drop;
|
|
}
|
|
|
|
/*
|
|
* This table is the definition of how we handle ICMP.
|
|
*/
|
|
static const struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
|
|
[ICMP_ECHOREPLY] = {
|
|
.output_entry = ICMP_MIB_OUTECHOREPS,
|
|
.input_entry = ICMP_MIB_INECHOREPS,
|
|
.handler = icmp_discard,
|
|
},
|
|
[1] = {
|
|
.output_entry = ICMP_MIB_DUMMY,
|
|
.input_entry = ICMP_MIB_INERRORS,
|
|
.handler = icmp_discard,
|
|
.error = 1,
|
|
},
|
|
[2] = {
|
|
.output_entry = ICMP_MIB_DUMMY,
|
|
.input_entry = ICMP_MIB_INERRORS,
|
|
.handler = icmp_discard,
|
|
.error = 1,
|
|
},
|
|
[ICMP_DEST_UNREACH] = {
|
|
.output_entry = ICMP_MIB_OUTDESTUNREACHS,
|
|
.input_entry = ICMP_MIB_INDESTUNREACHS,
|
|
.handler = icmp_unreach,
|
|
.error = 1,
|
|
},
|
|
[ICMP_SOURCE_QUENCH] = {
|
|
.output_entry = ICMP_MIB_OUTSRCQUENCHS,
|
|
.input_entry = ICMP_MIB_INSRCQUENCHS,
|
|
.handler = icmp_unreach,
|
|
.error = 1,
|
|
},
|
|
[ICMP_REDIRECT] = {
|
|
.output_entry = ICMP_MIB_OUTREDIRECTS,
|
|
.input_entry = ICMP_MIB_INREDIRECTS,
|
|
.handler = icmp_redirect,
|
|
.error = 1,
|
|
},
|
|
[6] = {
|
|
.output_entry = ICMP_MIB_DUMMY,
|
|
.input_entry = ICMP_MIB_INERRORS,
|
|
.handler = icmp_discard,
|
|
.error = 1,
|
|
},
|
|
[7] = {
|
|
.output_entry = ICMP_MIB_DUMMY,
|
|
.input_entry = ICMP_MIB_INERRORS,
|
|
.handler = icmp_discard,
|
|
.error = 1,
|
|
},
|
|
[ICMP_ECHO] = {
|
|
.output_entry = ICMP_MIB_OUTECHOS,
|
|
.input_entry = ICMP_MIB_INECHOS,
|
|
.handler = icmp_echo,
|
|
},
|
|
[9] = {
|
|
.output_entry = ICMP_MIB_DUMMY,
|
|
.input_entry = ICMP_MIB_INERRORS,
|
|
.handler = icmp_discard,
|
|
.error = 1,
|
|
},
|
|
[10] = {
|
|
.output_entry = ICMP_MIB_DUMMY,
|
|
.input_entry = ICMP_MIB_INERRORS,
|
|
.handler = icmp_discard,
|
|
.error = 1,
|
|
},
|
|
[ICMP_TIME_EXCEEDED] = {
|
|
.output_entry = ICMP_MIB_OUTTIMEEXCDS,
|
|
.input_entry = ICMP_MIB_INTIMEEXCDS,
|
|
.handler = icmp_unreach,
|
|
.error = 1,
|
|
},
|
|
[ICMP_PARAMETERPROB] = {
|
|
.output_entry = ICMP_MIB_OUTPARMPROBS,
|
|
.input_entry = ICMP_MIB_INPARMPROBS,
|
|
.handler = icmp_unreach,
|
|
.error = 1,
|
|
},
|
|
[ICMP_TIMESTAMP] = {
|
|
.output_entry = ICMP_MIB_OUTTIMESTAMPS,
|
|
.input_entry = ICMP_MIB_INTIMESTAMPS,
|
|
.handler = icmp_timestamp,
|
|
},
|
|
[ICMP_TIMESTAMPREPLY] = {
|
|
.output_entry = ICMP_MIB_OUTTIMESTAMPREPS,
|
|
.input_entry = ICMP_MIB_INTIMESTAMPREPS,
|
|
.handler = icmp_discard,
|
|
},
|
|
[ICMP_INFO_REQUEST] = {
|
|
.output_entry = ICMP_MIB_DUMMY,
|
|
.input_entry = ICMP_MIB_DUMMY,
|
|
.handler = icmp_discard,
|
|
},
|
|
[ICMP_INFO_REPLY] = {
|
|
.output_entry = ICMP_MIB_DUMMY,
|
|
.input_entry = ICMP_MIB_DUMMY,
|
|
.handler = icmp_discard,
|
|
},
|
|
[ICMP_ADDRESS] = {
|
|
.output_entry = ICMP_MIB_OUTADDRMASKS,
|
|
.input_entry = ICMP_MIB_INADDRMASKS,
|
|
.handler = icmp_address,
|
|
},
|
|
[ICMP_ADDRESSREPLY] = {
|
|
.output_entry = ICMP_MIB_OUTADDRMASKREPS,
|
|
.input_entry = ICMP_MIB_INADDRMASKREPS,
|
|
.handler = icmp_address_reply,
|
|
},
|
|
};
|
|
|
|
void __init icmp_init(struct net_proto_family *ops)
|
|
{
|
|
struct inet_sock *inet;
|
|
int i;
|
|
|
|
for_each_possible_cpu(i) {
|
|
int err;
|
|
|
|
err = sock_create_kern(PF_INET, SOCK_RAW, IPPROTO_ICMP,
|
|
&per_cpu(__icmp_socket, i));
|
|
|
|
if (err < 0)
|
|
panic("Failed to create the ICMP control socket.\n");
|
|
|
|
per_cpu(__icmp_socket, i)->sk->sk_allocation = GFP_ATOMIC;
|
|
|
|
/* Enough space for 2 64K ICMP packets, including
|
|
* sk_buff struct overhead.
|
|
*/
|
|
per_cpu(__icmp_socket, i)->sk->sk_sndbuf =
|
|
(2 * ((64 * 1024) + sizeof(struct sk_buff)));
|
|
|
|
inet = inet_sk(per_cpu(__icmp_socket, i)->sk);
|
|
inet->uc_ttl = -1;
|
|
inet->pmtudisc = IP_PMTUDISC_DONT;
|
|
|
|
/* Unhash it so that IP input processing does not even
|
|
* see it, we do not wish this socket to see incoming
|
|
* packets.
|
|
*/
|
|
per_cpu(__icmp_socket, i)->sk->sk_prot->unhash(per_cpu(__icmp_socket, i)->sk);
|
|
}
|
|
}
|
|
|
|
EXPORT_SYMBOL(icmp_err_convert);
|
|
EXPORT_SYMBOL(icmp_send);
|
|
EXPORT_SYMBOL(icmp_statistics);
|
|
EXPORT_SYMBOL(xrlim_allow);
|