240 lines
6.4 KiB
C
240 lines
6.4 KiB
C
/*
|
|
* MDIO bus driver for the Xilinx Axi Ethernet device
|
|
*
|
|
* Copyright (c) 2009 Secret Lab Technologies, Ltd.
|
|
* Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu>
|
|
* Copyright (c) 2010 - 2011 PetaLogix
|
|
* Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/jiffies.h>
|
|
|
|
#include "xilinx_axienet.h"
|
|
|
|
#define MAX_MDIO_FREQ 2500000 /* 2.5 MHz */
|
|
#define DEFAULT_CLOCK_DIVISOR XAE_MDIO_DIV_DFT
|
|
|
|
/* Wait till MDIO interface is ready to accept a new transaction.*/
|
|
int axienet_mdio_wait_until_ready(struct axienet_local *lp)
|
|
{
|
|
long end = jiffies + 2;
|
|
while (!(axienet_ior(lp, XAE_MDIO_MCR_OFFSET) &
|
|
XAE_MDIO_MCR_READY_MASK)) {
|
|
if (end - jiffies <= 0) {
|
|
WARN_ON(1);
|
|
return -ETIMEDOUT;
|
|
}
|
|
udelay(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* axienet_mdio_read - MDIO interface read function
|
|
* @bus: Pointer to mii bus structure
|
|
* @phy_id: Address of the PHY device
|
|
* @reg: PHY register to read
|
|
*
|
|
* returns: The register contents on success, -ETIMEDOUT on a timeout
|
|
*
|
|
* Reads the contents of the requested register from the requested PHY
|
|
* address by first writing the details into MCR register. After a while
|
|
* the register MRD is read to obtain the PHY register content.
|
|
*/
|
|
static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
|
|
{
|
|
u32 rc;
|
|
int ret;
|
|
struct axienet_local *lp = bus->priv;
|
|
|
|
ret = axienet_mdio_wait_until_ready(lp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
|
|
(((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
|
|
XAE_MDIO_MCR_PHYAD_MASK) |
|
|
((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
|
|
XAE_MDIO_MCR_REGAD_MASK) |
|
|
XAE_MDIO_MCR_INITIATE_MASK |
|
|
XAE_MDIO_MCR_OP_READ_MASK));
|
|
|
|
ret = axienet_mdio_wait_until_ready(lp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF;
|
|
|
|
dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n",
|
|
phy_id, reg, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* axienet_mdio_write - MDIO interface write function
|
|
* @bus: Pointer to mii bus structure
|
|
* @phy_id: Address of the PHY device
|
|
* @reg: PHY register to write to
|
|
* @val: Value to be written into the register
|
|
*
|
|
* returns: 0 on success, -ETIMEDOUT on a timeout
|
|
*
|
|
* Writes the value to the requested register by first writing the value
|
|
* into MWD register. The the MCR register is then appropriately setup
|
|
* to finish the write operation.
|
|
*/
|
|
static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
|
|
u16 val)
|
|
{
|
|
int ret;
|
|
struct axienet_local *lp = bus->priv;
|
|
|
|
dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
|
|
phy_id, reg, val);
|
|
|
|
ret = axienet_mdio_wait_until_ready(lp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val);
|
|
axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
|
|
(((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
|
|
XAE_MDIO_MCR_PHYAD_MASK) |
|
|
((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
|
|
XAE_MDIO_MCR_REGAD_MASK) |
|
|
XAE_MDIO_MCR_INITIATE_MASK |
|
|
XAE_MDIO_MCR_OP_WRITE_MASK));
|
|
|
|
ret = axienet_mdio_wait_until_ready(lp);
|
|
if (ret < 0)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* axienet_mdio_setup - MDIO setup function
|
|
* @lp: Pointer to axienet local data structure.
|
|
* @np: Pointer to device node
|
|
*
|
|
* returns: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
|
|
* mdiobus_alloc (to allocate memory for mii bus structure) fails.
|
|
*
|
|
* Sets up the MDIO interface by initializing the MDIO clock and enabling the
|
|
* MDIO interface in hardware. Register the MDIO interface.
|
|
**/
|
|
int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
|
|
{
|
|
int ret;
|
|
u32 clk_div, host_clock;
|
|
u32 *property_p;
|
|
struct mii_bus *bus;
|
|
struct resource res;
|
|
struct device_node *np1;
|
|
|
|
/* clk_div can be calculated by deriving it from the equation:
|
|
* fMDIO = fHOST / ((1 + clk_div) * 2)
|
|
*
|
|
* Where fMDIO <= 2500000, so we get:
|
|
* fHOST / ((1 + clk_div) * 2) <= 2500000
|
|
*
|
|
* Then we get:
|
|
* 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST)
|
|
*
|
|
* Then we get:
|
|
* 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST)
|
|
*
|
|
* Then we get:
|
|
* 1 / (1 + clk_div) <= (5000000 / fHOST)
|
|
*
|
|
* So:
|
|
* (1 + clk_div) >= (fHOST / 5000000)
|
|
*
|
|
* And finally:
|
|
* clk_div >= (fHOST / 5000000) - 1
|
|
*
|
|
* fHOST can be read from the flattened device tree as property
|
|
* "clock-frequency" from the CPU
|
|
*/
|
|
|
|
np1 = of_find_node_by_name(NULL, "cpu");
|
|
if (!np1) {
|
|
printk(KERN_WARNING "%s(): Could not find CPU device node.",
|
|
__func__);
|
|
printk(KERN_WARNING "Setting MDIO clock divisor to "
|
|
"default %d\n", DEFAULT_CLOCK_DIVISOR);
|
|
clk_div = DEFAULT_CLOCK_DIVISOR;
|
|
goto issue;
|
|
}
|
|
property_p = (u32 *) of_get_property(np1, "clock-frequency", NULL);
|
|
if (!property_p) {
|
|
printk(KERN_WARNING "%s(): Could not find CPU property: "
|
|
"clock-frequency.", __func__);
|
|
printk(KERN_WARNING "Setting MDIO clock divisor to "
|
|
"default %d\n", DEFAULT_CLOCK_DIVISOR);
|
|
clk_div = DEFAULT_CLOCK_DIVISOR;
|
|
of_node_put(np1);
|
|
goto issue;
|
|
}
|
|
|
|
host_clock = be32_to_cpup(property_p);
|
|
clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
|
|
/* If there is any remainder from the division of
|
|
* fHOST / (MAX_MDIO_FREQ * 2), then we need to add
|
|
* 1 to the clock divisor or we will surely be above 2.5 MHz */
|
|
if (host_clock % (MAX_MDIO_FREQ * 2))
|
|
clk_div++;
|
|
|
|
printk(KERN_DEBUG "%s(): Setting MDIO clock divisor to %u based "
|
|
"on %u Hz host clock.\n", __func__, clk_div, host_clock);
|
|
|
|
of_node_put(np1);
|
|
issue:
|
|
axienet_iow(lp, XAE_MDIO_MC_OFFSET,
|
|
(((u32) clk_div) | XAE_MDIO_MC_MDIOEN_MASK));
|
|
|
|
ret = axienet_mdio_wait_until_ready(lp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
bus = mdiobus_alloc();
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
np1 = of_get_parent(lp->phy_node);
|
|
of_address_to_resource(np1, 0, &res);
|
|
snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
|
|
(unsigned long long) res.start);
|
|
|
|
bus->priv = lp;
|
|
bus->name = "Xilinx Axi Ethernet MDIO";
|
|
bus->read = axienet_mdio_read;
|
|
bus->write = axienet_mdio_write;
|
|
bus->parent = lp->dev;
|
|
bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
|
|
lp->mii_bus = bus;
|
|
|
|
ret = of_mdiobus_register(bus, np1);
|
|
if (ret) {
|
|
mdiobus_free(bus);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* axienet_mdio_teardown - MDIO remove function
|
|
* @lp: Pointer to axienet local data structure.
|
|
*
|
|
* Unregisters the MDIO and frees any associate memory for mii bus.
|
|
*/
|
|
void axienet_mdio_teardown(struct axienet_local *lp)
|
|
{
|
|
mdiobus_unregister(lp->mii_bus);
|
|
kfree(lp->mii_bus->irq);
|
|
mdiobus_free(lp->mii_bus);
|
|
lp->mii_bus = NULL;
|
|
}
|