336 lines
12 KiB
C
336 lines
12 KiB
C
/*
|
|
* TI clock drivers support
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#ifndef __LINUX_CLK_TI_H__
|
|
#define __LINUX_CLK_TI_H__
|
|
|
|
#include <linux/clkdev.h>
|
|
|
|
/**
|
|
* struct dpll_data - DPLL registers and integration data
|
|
* @mult_div1_reg: register containing the DPLL M and N bitfields
|
|
* @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
|
|
* @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
|
|
* @clk_bypass: struct clk pointer to the clock's bypass clock input
|
|
* @clk_ref: struct clk pointer to the clock's reference clock input
|
|
* @control_reg: register containing the DPLL mode bitfield
|
|
* @enable_mask: mask of the DPLL mode bitfield in @control_reg
|
|
* @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
|
|
* @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
|
|
* @last_rounded_m4xen: cache of the last M4X result of
|
|
* omap4_dpll_regm4xen_round_rate()
|
|
* @last_rounded_lpmode: cache of the last lpmode result of
|
|
* omap4_dpll_lpmode_recalc()
|
|
* @max_multiplier: maximum valid non-bypass multiplier value (actual)
|
|
* @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
|
|
* @min_divider: minimum valid non-bypass divider value (actual)
|
|
* @max_divider: maximum valid non-bypass divider value (actual)
|
|
* @modes: possible values of @enable_mask
|
|
* @autoidle_reg: register containing the DPLL autoidle mode bitfield
|
|
* @idlest_reg: register containing the DPLL idle status bitfield
|
|
* @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
|
|
* @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
|
|
* @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg
|
|
* @dcc_rate: rate atleast which DCC @dcc_mask must be set
|
|
* @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
|
|
* @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
|
|
* @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
|
|
* @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
|
|
* @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
|
|
* @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
|
|
* @flags: DPLL type/features (see below)
|
|
*
|
|
* Possible values for @flags:
|
|
* DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
|
|
*
|
|
* @freqsel_mask is only used on the OMAP34xx family and AM35xx.
|
|
*
|
|
* XXX Some DPLLs have multiple bypass inputs, so it's not technically
|
|
* correct to only have one @clk_bypass pointer.
|
|
*
|
|
* XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
|
|
* @last_rounded_n) should be separated from the runtime-fixed fields
|
|
* and placed into a different structure, so that the runtime-fixed data
|
|
* can be placed into read-only space.
|
|
*/
|
|
struct dpll_data {
|
|
void __iomem *mult_div1_reg;
|
|
u32 mult_mask;
|
|
u32 div1_mask;
|
|
struct clk *clk_bypass;
|
|
struct clk *clk_ref;
|
|
void __iomem *control_reg;
|
|
u32 enable_mask;
|
|
unsigned long last_rounded_rate;
|
|
u16 last_rounded_m;
|
|
u8 last_rounded_m4xen;
|
|
u8 last_rounded_lpmode;
|
|
u16 max_multiplier;
|
|
u8 last_rounded_n;
|
|
u8 min_divider;
|
|
u16 max_divider;
|
|
u8 modes;
|
|
void __iomem *autoidle_reg;
|
|
void __iomem *idlest_reg;
|
|
u32 autoidle_mask;
|
|
u32 freqsel_mask;
|
|
u32 idlest_mask;
|
|
u32 dco_mask;
|
|
u32 sddiv_mask;
|
|
u32 dcc_mask;
|
|
unsigned long dcc_rate;
|
|
u32 lpmode_mask;
|
|
u32 m4xen_mask;
|
|
u8 auto_recal_bit;
|
|
u8 recal_en_bit;
|
|
u8 recal_st_bit;
|
|
u8 flags;
|
|
};
|
|
|
|
struct clk_hw_omap;
|
|
|
|
/**
|
|
* struct clk_hw_omap_ops - OMAP clk ops
|
|
* @find_idlest: find idlest register information for a clock
|
|
* @find_companion: find companion clock register information for a clock,
|
|
* basically converts CM_ICLKEN* <-> CM_FCLKEN*
|
|
* @allow_idle: enables autoidle hardware functionality for a clock
|
|
* @deny_idle: prevent autoidle hardware functionality for a clock
|
|
*/
|
|
struct clk_hw_omap_ops {
|
|
void (*find_idlest)(struct clk_hw_omap *oclk,
|
|
void __iomem **idlest_reg,
|
|
u8 *idlest_bit, u8 *idlest_val);
|
|
void (*find_companion)(struct clk_hw_omap *oclk,
|
|
void __iomem **other_reg,
|
|
u8 *other_bit);
|
|
void (*allow_idle)(struct clk_hw_omap *oclk);
|
|
void (*deny_idle)(struct clk_hw_omap *oclk);
|
|
};
|
|
|
|
/**
|
|
* struct clk_hw_omap - OMAP struct clk
|
|
* @node: list_head connecting this clock into the full clock list
|
|
* @enable_reg: register to write to enable the clock (see @enable_bit)
|
|
* @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
|
|
* @flags: see "struct clk.flags possibilities" above
|
|
* @clksel_reg: for clksel clks, register va containing src/divisor select
|
|
* @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
|
|
* @clksel: for clksel clks, pointer to struct clksel for this clock
|
|
* @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
|
|
* @clkdm_name: clockdomain name that this clock is contained in
|
|
* @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
|
|
* @ops: clock ops for this clock
|
|
*/
|
|
struct clk_hw_omap {
|
|
struct clk_hw hw;
|
|
struct list_head node;
|
|
unsigned long fixed_rate;
|
|
u8 fixed_div;
|
|
void __iomem *enable_reg;
|
|
u8 enable_bit;
|
|
u8 flags;
|
|
void __iomem *clksel_reg;
|
|
u32 clksel_mask;
|
|
const struct clksel *clksel;
|
|
struct dpll_data *dpll_data;
|
|
const char *clkdm_name;
|
|
struct clockdomain *clkdm;
|
|
const struct clk_hw_omap_ops *ops;
|
|
};
|
|
|
|
/*
|
|
* struct clk_hw_omap.flags possibilities
|
|
*
|
|
* XXX document the rest of the clock flags here
|
|
*
|
|
* ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
|
|
* with 32bit ops, by default OMAP1 uses 16bit ops.
|
|
* CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
|
|
* CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
|
|
* clock is put to no-idle mode.
|
|
* ENABLE_ON_INIT: Clock is enabled on init.
|
|
* INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
|
|
* disable. This inverts the behavior making '0' enable and '1' disable.
|
|
* CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
|
|
* bits share the same register. This flag allows the
|
|
* omap4_dpllmx*() code to determine which GATE_CTRL bit field
|
|
* should be used. This is a temporary solution - a better approach
|
|
* would be to associate clock type-specific data with the clock,
|
|
* similar to the struct dpll_data approach.
|
|
* MEMMAP_ADDRESSING: Use memmap addressing to access clock registers.
|
|
*/
|
|
#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
|
|
#define CLOCK_IDLE_CONTROL (1 << 1)
|
|
#define CLOCK_NO_IDLE_PARENT (1 << 2)
|
|
#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
|
|
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
|
|
#define CLOCK_CLKOUTX2 (1 << 5)
|
|
#define MEMMAP_ADDRESSING (1 << 6)
|
|
|
|
/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
|
|
#define DPLL_LOW_POWER_STOP 0x1
|
|
#define DPLL_LOW_POWER_BYPASS 0x5
|
|
#define DPLL_LOCKED 0x7
|
|
|
|
/* DPLL Type and DCO Selection Flags */
|
|
#define DPLL_J_TYPE 0x1
|
|
|
|
/* Composite clock component types */
|
|
enum {
|
|
CLK_COMPONENT_TYPE_GATE = 0,
|
|
CLK_COMPONENT_TYPE_DIVIDER,
|
|
CLK_COMPONENT_TYPE_MUX,
|
|
CLK_COMPONENT_TYPE_MAX,
|
|
};
|
|
|
|
/**
|
|
* struct ti_dt_clk - OMAP DT clock alias declarations
|
|
* @lk: clock lookup definition
|
|
* @node_name: clock DT node to map to
|
|
*/
|
|
struct ti_dt_clk {
|
|
struct clk_lookup lk;
|
|
char *node_name;
|
|
};
|
|
|
|
#define DT_CLK(dev, con, name) \
|
|
{ \
|
|
.lk = { \
|
|
.dev_id = dev, \
|
|
.con_id = con, \
|
|
}, \
|
|
.node_name = name, \
|
|
}
|
|
|
|
/* Maximum number of clock memmaps */
|
|
#define CLK_MAX_MEMMAPS 4
|
|
|
|
typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
|
|
|
|
/**
|
|
* struct clk_omap_reg - OMAP register declaration
|
|
* @offset: offset from the master IP module base address
|
|
* @index: index of the master IP module
|
|
*/
|
|
struct clk_omap_reg {
|
|
u16 offset;
|
|
u16 index;
|
|
};
|
|
|
|
/**
|
|
* struct ti_clk_ll_ops - low-level register access ops for a clock
|
|
* @clk_readl: pointer to register read function
|
|
* @clk_writel: pointer to register write function
|
|
*
|
|
* Low-level register access ops are generally used by the basic clock types
|
|
* (clk-gate, clk-mux, clk-divider etc.) to provide support for various
|
|
* low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
|
|
* used by other hardware-specific clock drivers if needed.
|
|
*/
|
|
struct ti_clk_ll_ops {
|
|
u32 (*clk_readl)(void __iomem *reg);
|
|
void (*clk_writel)(u32 val, void __iomem *reg);
|
|
};
|
|
|
|
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
|
|
|
|
extern const struct clk_ops ti_clk_divider_ops;
|
|
extern const struct clk_ops ti_clk_mux_ops;
|
|
|
|
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
|
|
|
|
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
|
|
int omap3_noncore_dpll_enable(struct clk_hw *hw);
|
|
void omap3_noncore_dpll_disable(struct clk_hw *hw);
|
|
int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate);
|
|
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
|
|
unsigned long parent_rate);
|
|
long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
|
|
unsigned long target_rate,
|
|
unsigned long *parent_rate);
|
|
u8 omap2_init_dpll_parent(struct clk_hw *hw);
|
|
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
|
|
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
|
|
unsigned long *parent_rate);
|
|
void omap2_init_clk_clkdm(struct clk_hw *clk);
|
|
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
|
|
unsigned long parent_rate);
|
|
int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate);
|
|
long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate);
|
|
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
|
|
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
|
|
int omap2_clk_disable_autoidle_all(void);
|
|
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
|
|
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
|
|
unsigned long parent_rate);
|
|
int omap2_dflt_clk_enable(struct clk_hw *hw);
|
|
void omap2_dflt_clk_disable(struct clk_hw *hw);
|
|
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
|
|
void omap3_clk_lock_dpll5(void);
|
|
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
|
|
unsigned long parent_rate);
|
|
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
|
|
unsigned long parent_rate);
|
|
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
|
|
void omap2xxx_clkt_vps_init(void);
|
|
|
|
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
|
|
void ti_dt_clocks_register(struct ti_dt_clk *oclks);
|
|
void ti_dt_clk_init_provider(struct device_node *np, int index);
|
|
void ti_dt_clockdomains_setup(void);
|
|
int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
|
|
ti_of_clk_init_cb_t func);
|
|
int of_ti_clk_autoidle_setup(struct device_node *node);
|
|
int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
|
|
|
|
int omap3430_dt_clk_init(void);
|
|
int omap3630_dt_clk_init(void);
|
|
int am35xx_dt_clk_init(void);
|
|
int ti81xx_dt_clk_init(void);
|
|
int omap4xxx_dt_clk_init(void);
|
|
int omap5xxx_dt_clk_init(void);
|
|
int dra7xx_dt_clk_init(void);
|
|
int am33xx_dt_clk_init(void);
|
|
int am43xx_dt_clk_init(void);
|
|
int omap2420_dt_clk_init(void);
|
|
int omap2430_dt_clk_init(void);
|
|
|
|
#ifdef CONFIG_OF
|
|
void of_ti_clk_allow_autoidle_all(void);
|
|
void of_ti_clk_deny_autoidle_all(void);
|
|
#else
|
|
static inline void of_ti_clk_allow_autoidle_all(void) { }
|
|
static inline void of_ti_clk_deny_autoidle_all(void) { }
|
|
#endif
|
|
|
|
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
|
|
extern const struct clk_hw_omap_ops clkhwops_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_iclk;
|
|
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
|
|
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
|
|
|
|
#endif
|