p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/drivers/media/video/tvp514x.c

1299 lines
34 KiB
C
Raw Blame History

/*
* drivers/media/video/tvp514x.c
*
* TI TVP5146/47 decoder driver
*
* Copyright (C) 2008 Texas Instruments Inc
* Author: Vaibhav Hiremath <hvaibhav@ti.com>
*
* Contributors:
* Sivaraj R <sivaraj@ti.com>
* Brijesh R Jadav <brijesh.j@ti.com>
* Hardik Shah <hardik.shah@ti.com>
* Manjunath Hadli <mrh@ti.com>
* Karicheri Muralidharan <m-karicheri2@ti.com>
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
#include <media/v4l2-mediabus.h>
#include <media/v4l2-chip-ident.h>
#include <media/tvp514x.h>
#include "tvp514x_regs.h"
/* Module Name */
#define TVP514X_MODULE_NAME "tvp514x"
/* Private macros for TVP */
#define I2C_RETRY_COUNT (5)
#define LOCK_RETRY_COUNT (5)
#define LOCK_RETRY_DELAY (200)
/* Debug functions */
static int debug;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("TVP514X linux decoder driver");
MODULE_LICENSE("GPL");
/* enum tvp514x_std - enum for supported standards */
enum tvp514x_std {
STD_NTSC_MJ = 0,
STD_PAL_BDGHIN,
STD_INVALID
};
/**
* struct tvp514x_std_info - Structure to store standard informations
* @width: Line width in pixels
* @height:Number of active lines
* @video_std: Value to write in REG_VIDEO_STD register
* @standard: v4l2 standard structure information
*/
struct tvp514x_std_info {
unsigned long width;
unsigned long height;
u8 video_std;
struct v4l2_standard standard;
};
static struct tvp514x_reg tvp514x_reg_list_default[0x40];
static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable);
/**
* struct tvp514x_decoder - TVP5146/47 decoder object
* @sd: Subdevice Slave handle
* @tvp514x_regs: copy of hw's regs with preset values.
* @pdata: Board specific
* @ver: Chip version
* @streaming: TVP5146/47 decoder streaming - enabled or disabled.
* @current_std: Current standard
* @num_stds: Number of standards
* @std_list: Standards list
* @input: Input routing at chip level
* @output: Output routing at chip level
*/
struct tvp514x_decoder {
struct v4l2_subdev sd;
struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)];
const struct tvp514x_platform_data *pdata;
int ver;
int streaming;
enum tvp514x_std current_std;
int num_stds;
const struct tvp514x_std_info *std_list;
/* Input and Output Routing parameters */
u32 input;
u32 output;
};
/* TVP514x default register values */
static struct tvp514x_reg tvp514x_reg_list_default[] = {
/* Composite selected */
{TOK_WRITE, REG_INPUT_SEL, 0x05},
{TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F},
/* Auto mode */
{TOK_WRITE, REG_VIDEO_STD, 0x00},
{TOK_WRITE, REG_OPERATION_MODE, 0x00},
{TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F},
{TOK_WRITE, REG_COLOR_KILLER, 0x10},
{TOK_WRITE, REG_LUMA_CONTROL1, 0x00},
{TOK_WRITE, REG_LUMA_CONTROL2, 0x00},
{TOK_WRITE, REG_LUMA_CONTROL3, 0x02},
{TOK_WRITE, REG_BRIGHTNESS, 0x80},
{TOK_WRITE, REG_CONTRAST, 0x80},
{TOK_WRITE, REG_SATURATION, 0x80},
{TOK_WRITE, REG_HUE, 0x00},
{TOK_WRITE, REG_CHROMA_CONTROL1, 0x00},
{TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E},
/* Reserved */
{TOK_SKIP, 0x0F, 0x00},
{TOK_WRITE, REG_COMP_PR_SATURATION, 0x80},
{TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80},
{TOK_WRITE, REG_COMP_PB_SATURATION, 0x80},
/* Reserved */
{TOK_SKIP, 0x13, 0x00},
{TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80},
/* Reserved */
{TOK_SKIP, 0x15, 0x00},
/* NTSC timing */
{TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55},
{TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00},
{TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25},
{TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03},
/* NTSC timing */
{TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00},
{TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00},
{TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40},
{TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00},
/* NTSC timing */
{TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04},
{TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00},
{TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07},
{TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00},
/* NTSC timing */
{TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01},
{TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00},
{TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15},
{TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00},
/* Reserved */
{TOK_SKIP, 0x26, 0x00},
/* Reserved */
{TOK_SKIP, 0x27, 0x00},
{TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC},
/* Reserved */
{TOK_SKIP, 0x29, 0x00},
{TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00},
/* Reserved */
{TOK_SKIP, 0x2B, 0x00},
{TOK_SKIP, REG_SCART_DELAY, 0x00},
{TOK_SKIP, REG_CTI_DELAY, 0x00},
{TOK_SKIP, REG_CTI_CONTROL, 0x00},
/* Reserved */
{TOK_SKIP, 0x2F, 0x00},
/* Reserved */
{TOK_SKIP, 0x30, 0x00},
/* Reserved */
{TOK_SKIP, 0x31, 0x00},
/* HS, VS active high */
{TOK_WRITE, REG_SYNC_CONTROL, 0x00},
/* 10-bit BT.656 */
{TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00},
/* Enable clk & data */
{TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11},
/* Enable AVID & FLD */
{TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE},
/* Enable VS & HS */
{TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF},
{TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF},
{TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF},
/* Clear status */
{TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01},
{TOK_TERM, 0, 0},
};
/**
* Supported standards -
*
* Currently supports two standards only, need to add support for rest of the
* modes, like SECAM, etc...
*/
static const struct tvp514x_std_info tvp514x_std_list[] = {
/* Standard: STD_NTSC_MJ */
[STD_NTSC_MJ] = {
.width = NTSC_NUM_ACTIVE_PIXELS,
.height = NTSC_NUM_ACTIVE_LINES,
.video_std = VIDEO_STD_NTSC_MJ_BIT,
.standard = {
.index = 0,
.id = V4L2_STD_NTSC,
.name = "NTSC",
.frameperiod = {1001, 30000},
.framelines = 525
},
/* Standard: STD_PAL_BDGHIN */
},
[STD_PAL_BDGHIN] = {
.width = PAL_NUM_ACTIVE_PIXELS,
.height = PAL_NUM_ACTIVE_LINES,
.video_std = VIDEO_STD_PAL_BDGHIN_BIT,
.standard = {
.index = 1,
.id = V4L2_STD_PAL,
.name = "PAL",
.frameperiod = {1, 25},
.framelines = 625
},
},
/* Standard: need to add for additional standard */
};
static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd)
{
return container_of(sd, struct tvp514x_decoder, sd);
}
/**
* tvp514x_read_reg() - Read a value from a register in an TVP5146/47.
* @sd: ptr to v4l2_subdev struct
* @reg: TVP5146/47 register address
*
* Returns value read if successful, or non-zero (-1) otherwise.
*/
static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg)
{
int err, retry = 0;
struct i2c_client *client = v4l2_get_subdevdata(sd);
read_again:
err = i2c_smbus_read_byte_data(client, reg);
if (err < 0) {
if (retry <= I2C_RETRY_COUNT) {
v4l2_warn(sd, "Read: retry ... %d\n", retry);
retry++;
msleep_interruptible(10);
goto read_again;
}
}
return err;
}
/**
* dump_reg() - dump the register content of TVP5146/47.
* @sd: ptr to v4l2_subdev struct
* @reg: TVP5146/47 register address
*/
static void dump_reg(struct v4l2_subdev *sd, u8 reg)
{
u32 val;
val = tvp514x_read_reg(sd, reg);
v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val);
}
/**
* tvp514x_write_reg() - Write a value to a register in TVP5146/47
* @sd: ptr to v4l2_subdev struct
* @reg: TVP5146/47 register address
* @val: value to be written to the register
*
* Write a value to a register in an TVP5146/47 decoder device.
* Returns zero if successful, or non-zero otherwise.
*/
static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val)
{
int err, retry = 0;
struct i2c_client *client = v4l2_get_subdevdata(sd);
write_again:
err = i2c_smbus_write_byte_data(client, reg, val);
if (err) {
if (retry <= I2C_RETRY_COUNT) {
v4l2_warn(sd, "Write: retry ... %d\n", retry);
retry++;
msleep_interruptible(10);
goto write_again;
}
}
return err;
}
/**
* tvp514x_write_regs() : Initializes a list of TVP5146/47 registers
* @sd: ptr to v4l2_subdev struct
* @reglist: list of TVP5146/47 registers and values
*
* Initializes a list of TVP5146/47 registers:-
* if token is TOK_TERM, then entire write operation terminates
* if token is TOK_DELAY, then a delay of 'val' msec is introduced
* if token is TOK_SKIP, then the register write is skipped
* if token is TOK_WRITE, then the register write is performed
* Returns zero if successful, or non-zero otherwise.
*/
static int tvp514x_write_regs(struct v4l2_subdev *sd,
const struct tvp514x_reg reglist[])
{
int err;
const struct tvp514x_reg *next = reglist;
for (; next->token != TOK_TERM; next++) {
if (next->token == TOK_DELAY) {
msleep(next->val);
continue;
}
if (next->token == TOK_SKIP)
continue;
err = tvp514x_write_reg(sd, next->reg, (u8) next->val);
if (err) {
v4l2_err(sd, "Write failed. Err[%d]\n", err);
return err;
}
}
return 0;
}
/**
* tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
* @sd: ptr to v4l2_subdev struct
*
* Returns the current standard detected by TVP5146/47, STD_INVALID if there is no
* standard detected.
*/
static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd)
{
u8 std, std_status;
std = tvp514x_read_reg(sd, REG_VIDEO_STD);
if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT)
/* use the standard status register */
std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS);
else
/* use the standard register itself */
std_status = std;
switch (std_status & VIDEO_STD_MASK) {
case VIDEO_STD_NTSC_MJ_BIT:
return STD_NTSC_MJ;
case VIDEO_STD_PAL_BDGHIN_BIT:
return STD_PAL_BDGHIN;
default:
return STD_INVALID;
}
return STD_INVALID;
}
/* TVP5146/47 register dump function */
static void tvp514x_reg_dump(struct v4l2_subdev *sd)
{
dump_reg(sd, REG_INPUT_SEL);
dump_reg(sd, REG_AFE_GAIN_CTRL);
dump_reg(sd, REG_VIDEO_STD);
dump_reg(sd, REG_OPERATION_MODE);
dump_reg(sd, REG_COLOR_KILLER);
dump_reg(sd, REG_LUMA_CONTROL1);
dump_reg(sd, REG_LUMA_CONTROL2);
dump_reg(sd, REG_LUMA_CONTROL3);
dump_reg(sd, REG_BRIGHTNESS);
dump_reg(sd, REG_CONTRAST);
dump_reg(sd, REG_SATURATION);
dump_reg(sd, REG_HUE);
dump_reg(sd, REG_CHROMA_CONTROL1);
dump_reg(sd, REG_CHROMA_CONTROL2);
dump_reg(sd, REG_COMP_PR_SATURATION);
dump_reg(sd, REG_COMP_Y_CONTRAST);
dump_reg(sd, REG_COMP_PB_SATURATION);
dump_reg(sd, REG_COMP_Y_BRIGHTNESS);
dump_reg(sd, REG_AVID_START_PIXEL_LSB);
dump_reg(sd, REG_AVID_START_PIXEL_MSB);
dump_reg(sd, REG_AVID_STOP_PIXEL_LSB);
dump_reg(sd, REG_AVID_STOP_PIXEL_MSB);
dump_reg(sd, REG_HSYNC_START_PIXEL_LSB);
dump_reg(sd, REG_HSYNC_START_PIXEL_MSB);
dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB);
dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB);
dump_reg(sd, REG_VSYNC_START_LINE_LSB);
dump_reg(sd, REG_VSYNC_START_LINE_MSB);
dump_reg(sd, REG_VSYNC_STOP_LINE_LSB);
dump_reg(sd, REG_VSYNC_STOP_LINE_MSB);
dump_reg(sd, REG_VBLK_START_LINE_LSB);
dump_reg(sd, REG_VBLK_START_LINE_MSB);
dump_reg(sd, REG_VBLK_STOP_LINE_LSB);
dump_reg(sd, REG_VBLK_STOP_LINE_MSB);
dump_reg(sd, REG_SYNC_CONTROL);
dump_reg(sd, REG_OUTPUT_FORMATTER1);
dump_reg(sd, REG_OUTPUT_FORMATTER2);
dump_reg(sd, REG_OUTPUT_FORMATTER3);
dump_reg(sd, REG_OUTPUT_FORMATTER4);
dump_reg(sd, REG_OUTPUT_FORMATTER5);
dump_reg(sd, REG_OUTPUT_FORMATTER6);
dump_reg(sd, REG_CLEAR_LOST_LOCK);
}
/**
* tvp514x_configure() - Configure the TVP5146/47 registers
* @sd: ptr to v4l2_subdev struct
* @decoder: ptr to tvp514x_decoder structure
*
* Returns zero if successful, or non-zero otherwise.
*/
static int tvp514x_configure(struct v4l2_subdev *sd,
struct tvp514x_decoder *decoder)
{
int err;
/* common register initialization */
err =
tvp514x_write_regs(sd, decoder->tvp514x_regs);
if (err)
return err;
if (debug)
tvp514x_reg_dump(sd);
return 0;
}
/**
* tvp514x_detect() - Detect if an tvp514x is present, and if so which revision.
* @sd: pointer to standard V4L2 sub-device structure
* @decoder: pointer to tvp514x_decoder structure
*
* A device is considered to be detected if the chip ID (LSB and MSB)
* registers match the expected values.
* Any value of the rom version register is accepted.
* Returns ENODEV error number if no device is detected, or zero
* if a device is detected.
*/
static int tvp514x_detect(struct v4l2_subdev *sd,
struct tvp514x_decoder *decoder)
{
u8 chip_id_msb, chip_id_lsb, rom_ver;
struct i2c_client *client = v4l2_get_subdevdata(sd);
chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB);
chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB);
rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION);
v4l2_dbg(1, debug, sd,
"chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n",
chip_id_msb, chip_id_lsb, rom_ver);
if ((chip_id_msb != TVP514X_CHIP_ID_MSB)
|| ((chip_id_lsb != TVP5146_CHIP_ID_LSB)
&& (chip_id_lsb != TVP5147_CHIP_ID_LSB))) {
/* We didn't read the values we expected, so this must not be
* an TVP5146/47.
*/
v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n",
chip_id_msb, chip_id_lsb);
return -ENODEV;
}
decoder->ver = rom_ver;
v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n",
client->name, decoder->ver,
client->addr << 1, client->adapter->name);
return 0;
}
/**
* tvp514x_querystd() - V4L2 decoder interface handler for querystd
* @sd: pointer to standard V4L2 sub-device structure
* @std_id: standard V4L2 std_id ioctl enum
*
* Returns the current standard detected by TVP5146/47. If no active input is
* detected then *std_id is set to 0 and the function returns 0.
*/
static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
enum tvp514x_std current_std;
enum tvp514x_input input_sel;
u8 sync_lock_status, lock_mask;
if (std_id == NULL)
return -EINVAL;
*std_id = V4L2_STD_UNKNOWN;
/* query the current standard */
current_std = tvp514x_query_current_std(sd);
if (current_std == STD_INVALID)
return 0;
input_sel = decoder->input;
switch (input_sel) {
case INPUT_CVBS_VI1A:
case INPUT_CVBS_VI1B:
case INPUT_CVBS_VI1C:
case INPUT_CVBS_VI2A:
case INPUT_CVBS_VI2B:
case INPUT_CVBS_VI2C:
case INPUT_CVBS_VI3A:
case INPUT_CVBS_VI3B:
case INPUT_CVBS_VI3C:
case INPUT_CVBS_VI4A:
lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT |
STATUS_HORZ_SYNC_LOCK_BIT |
STATUS_VIRT_SYNC_LOCK_BIT;
break;
case INPUT_SVIDEO_VI2A_VI1A:
case INPUT_SVIDEO_VI2B_VI1B:
case INPUT_SVIDEO_VI2C_VI1C:
case INPUT_SVIDEO_VI2A_VI3A:
case INPUT_SVIDEO_VI2B_VI3B:
case INPUT_SVIDEO_VI2C_VI3C:
case INPUT_SVIDEO_VI4A_VI1A:
case INPUT_SVIDEO_VI4A_VI1B:
case INPUT_SVIDEO_VI4A_VI1C:
case INPUT_SVIDEO_VI4A_VI3A:
case INPUT_SVIDEO_VI4A_VI3B:
case INPUT_SVIDEO_VI4A_VI3C:
lock_mask = STATUS_HORZ_SYNC_LOCK_BIT |
STATUS_VIRT_SYNC_LOCK_BIT;
break;
/*Need to add other interfaces*/
default:
return -EINVAL;
}
/* check whether signal is locked */
sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1);
if (lock_mask != (sync_lock_status & lock_mask))
return 0; /* No input detected */
*std_id = decoder->std_list[current_std].standard.id;
v4l2_dbg(1, debug, sd, "Current STD: %s\n",
decoder->std_list[current_std].standard.name);
return 0;
}
/**
* tvp514x_s_std() - V4L2 decoder interface handler for s_std
* @sd: pointer to standard V4L2 sub-device structure
* @std_id: standard V4L2 v4l2_std_id ioctl enum
*
* If std_id is supported, sets the requested standard. Otherwise, returns
* -EINVAL
*/
static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
int err, i;
for (i = 0; i < decoder->num_stds; i++)
if (std_id & decoder->std_list[i].standard.id)
break;
if ((i == decoder->num_stds) || (i == STD_INVALID))
return -EINVAL;
err = tvp514x_write_reg(sd, REG_VIDEO_STD,
decoder->std_list[i].video_std);
if (err)
return err;
decoder->current_std = i;
decoder->tvp514x_regs[REG_VIDEO_STD].val =
decoder->std_list[i].video_std;
v4l2_dbg(1, debug, sd, "Standard set to: %s\n",
decoder->std_list[i].standard.name);
return 0;
}
/**
* tvp514x_s_routing() - V4L2 decoder interface handler for s_routing
* @sd: pointer to standard V4L2 sub-device structure
* @input: input selector for routing the signal
* @output: output selector for routing the signal
* @config: config value. Not used
*
* If index is valid, selects the requested input. Otherwise, returns -EINVAL if
* the input is not supported or there is no active signal present in the
* selected input.
*/
static int tvp514x_s_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
int err;
enum tvp514x_input input_sel;
enum tvp514x_output output_sel;
u8 sync_lock_status, lock_mask;
int try_count = LOCK_RETRY_COUNT;
if ((input >= INPUT_INVALID) ||
(output >= OUTPUT_INVALID))
/* Index out of bound */
return -EINVAL;
/*
* For the sequence streamon -> streamoff and again s_input
* it fails to lock the signal, since streamoff puts TVP514x
* into power off state which leads to failure in sub-sequent s_input.
*
* So power up the TVP514x device here, since it is important to lock
* the signal at this stage.
*/
if (!decoder->streaming)
tvp514x_s_stream(sd, 1);
input_sel = input;
output_sel = output;
err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel);
if (err)
return err;
output_sel |= tvp514x_read_reg(sd,
REG_OUTPUT_FORMATTER1) & 0x7;
err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1,
output_sel);
if (err)
return err;
decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel;
decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel;
/* Clear status */
msleep(LOCK_RETRY_DELAY);
err =
tvp514x_write_reg(sd, REG_CLEAR_LOST_LOCK, 0x01);
if (err)
return err;
switch (input_sel) {
case INPUT_CVBS_VI1A:
case INPUT_CVBS_VI1B:
case INPUT_CVBS_VI1C:
case INPUT_CVBS_VI2A:
case INPUT_CVBS_VI2B:
case INPUT_CVBS_VI2C:
case INPUT_CVBS_VI3A:
case INPUT_CVBS_VI3B:
case INPUT_CVBS_VI3C:
case INPUT_CVBS_VI4A:
lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT |
STATUS_HORZ_SYNC_LOCK_BIT |
STATUS_VIRT_SYNC_LOCK_BIT;
break;
case INPUT_SVIDEO_VI2A_VI1A:
case INPUT_SVIDEO_VI2B_VI1B:
case INPUT_SVIDEO_VI2C_VI1C:
case INPUT_SVIDEO_VI2A_VI3A:
case INPUT_SVIDEO_VI2B_VI3B:
case INPUT_SVIDEO_VI2C_VI3C:
case INPUT_SVIDEO_VI4A_VI1A:
case INPUT_SVIDEO_VI4A_VI1B:
case INPUT_SVIDEO_VI4A_VI1C:
case INPUT_SVIDEO_VI4A_VI3A:
case INPUT_SVIDEO_VI4A_VI3B:
case INPUT_SVIDEO_VI4A_VI3C:
lock_mask = STATUS_HORZ_SYNC_LOCK_BIT |
STATUS_VIRT_SYNC_LOCK_BIT;
break;
/* Need to add other interfaces*/
default:
return -EINVAL;
}
while (try_count-- > 0) {
/* Allow decoder to sync up with new input */
msleep(LOCK_RETRY_DELAY);
sync_lock_status = tvp514x_read_reg(sd,
REG_STATUS1);
if (lock_mask == (sync_lock_status & lock_mask))
/* Input detected */
break;
}
if (try_count < 0)
return -EINVAL;
decoder->input = input;
decoder->output = output;
v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel);
return 0;
}
/**
* tvp514x_queryctrl() - V4L2 decoder interface handler for queryctrl
* @sd: pointer to standard V4L2 sub-device structure
* @qctrl: standard V4L2 v4l2_queryctrl structure
*
* If the requested control is supported, returns the control information.
* Otherwise, returns -EINVAL if the control is not supported.
*/
static int
tvp514x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl)
{
int err = -EINVAL;
if (qctrl == NULL)
return err;
switch (qctrl->id) {
case V4L2_CID_BRIGHTNESS:
/* Brightness supported is (0-255), */
err = v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 128);
break;
case V4L2_CID_CONTRAST:
case V4L2_CID_SATURATION:
/**
* Saturation and Contrast supported is -
* Contrast: 0 - 255 (Default - 128)
* Saturation: 0 - 255 (Default - 128)
*/
err = v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 128);
break;
case V4L2_CID_HUE:
/* Hue Supported is -
* Hue - -180 - +180 (Default - 0, Step - +180)
*/
err = v4l2_ctrl_query_fill(qctrl, -180, 180, 180, 0);
break;
case V4L2_CID_AUTOGAIN:
/**
* Auto Gain supported is -
* 0 - 1 (Default - 1)
*/
err = v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 1);
break;
default:
v4l2_err(sd, "invalid control id %d\n", qctrl->id);
return err;
}
v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d\n",
qctrl->name, qctrl->minimum, qctrl->maximum,
qctrl->default_value);
return err;
}
/**
* tvp514x_g_ctrl() - V4L2 decoder interface handler for g_ctrl
* @sd: pointer to standard V4L2 sub-device structure
* @ctrl: pointer to v4l2_control structure
*
* If the requested control is supported, returns the control's current
* value from the decoder. Otherwise, returns -EINVAL if the control is not
* supported.
*/
static int
tvp514x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
if (ctrl == NULL)
return -EINVAL;
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
ctrl->value = decoder->tvp514x_regs[REG_BRIGHTNESS].val;
break;
case V4L2_CID_CONTRAST:
ctrl->value = decoder->tvp514x_regs[REG_CONTRAST].val;
break;
case V4L2_CID_SATURATION:
ctrl->value = decoder->tvp514x_regs[REG_SATURATION].val;
break;
case V4L2_CID_HUE:
ctrl->value = decoder->tvp514x_regs[REG_HUE].val;
if (ctrl->value == 0x7F)
ctrl->value = 180;
else if (ctrl->value == 0x80)
ctrl->value = -180;
else
ctrl->value = 0;
break;
case V4L2_CID_AUTOGAIN:
ctrl->value = decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val;
if ((ctrl->value & 0x3) == 3)
ctrl->value = 1;
else
ctrl->value = 0;
break;
default:
v4l2_err(sd, "invalid control id %d\n", ctrl->id);
return -EINVAL;
}
v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d\n",
ctrl->id, ctrl->value);
return 0;
}
/**
* tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl
* @sd: pointer to standard V4L2 sub-device structure
* @ctrl: pointer to v4l2_control structure
*
* If the requested control is supported, sets the control's current
* value in HW. Otherwise, returns -EINVAL if the control is not supported.
*/
static int
tvp514x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
int err = -EINVAL, value;
if (ctrl == NULL)
return err;
value = ctrl->value;
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
if (ctrl->value < 0 || ctrl->value > 255) {
v4l2_err(sd, "invalid brightness setting %d\n",
ctrl->value);
return -ERANGE;
}
err = tvp514x_write_reg(sd, REG_BRIGHTNESS,
value);
if (err)
return err;
decoder->tvp514x_regs[REG_BRIGHTNESS].val = value;
break;
case V4L2_CID_CONTRAST:
if (ctrl->value < 0 || ctrl->value > 255) {
v4l2_err(sd, "invalid contrast setting %d\n",
ctrl->value);
return -ERANGE;
}
err = tvp514x_write_reg(sd, REG_CONTRAST, value);
if (err)
return err;
decoder->tvp514x_regs[REG_CONTRAST].val = value;
break;
case V4L2_CID_SATURATION:
if (ctrl->value < 0 || ctrl->value > 255) {
v4l2_err(sd, "invalid saturation setting %d\n",
ctrl->value);
return -ERANGE;
}
err = tvp514x_write_reg(sd, REG_SATURATION, value);
if (err)
return err;
decoder->tvp514x_regs[REG_SATURATION].val = value;
break;
case V4L2_CID_HUE:
if (value == 180)
value = 0x7F;
else if (value == -180)
value = 0x80;
else if (value == 0)
value = 0;
else {
v4l2_err(sd, "invalid hue setting %d\n", ctrl->value);
return -ERANGE;
}
err = tvp514x_write_reg(sd, REG_HUE, value);
if (err)
return err;
decoder->tvp514x_regs[REG_HUE].val = value;
break;
case V4L2_CID_AUTOGAIN:
if (value == 1)
value = 0x0F;
else if (value == 0)
value = 0x0C;
else {
v4l2_err(sd, "invalid auto gain setting %d\n",
ctrl->value);
return -ERANGE;
}
err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value);
if (err)
return err;
decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value;
break;
default:
v4l2_err(sd, "invalid control id %d\n", ctrl->id);
return err;
}
v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n",
ctrl->id, ctrl->value);
return err;
}
/**
* tvp514x_enum_mbus_fmt() - V4L2 decoder interface handler for enum_mbus_fmt
* @sd: pointer to standard V4L2 sub-device structure
* @index: index of pixelcode to retrieve
* @code: receives the pixelcode
*
* Enumerates supported mediabus formats
*/
static int
tvp514x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
enum v4l2_mbus_pixelcode *code)
{
if (index)
return -EINVAL;
*code = V4L2_MBUS_FMT_YUYV10_2X10;
return 0;
}
/**
* tvp514x_mbus_fmt_cap() - V4L2 decoder interface handler for try/s/g_mbus_fmt
* @sd: pointer to standard V4L2 sub-device structure
* @f: pointer to the mediabus format structure
*
* Negotiates the image capture size and mediabus format.
*/
static int
tvp514x_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
enum tvp514x_std current_std;
if (f == NULL)
return -EINVAL;
/* Calculate height and width based on current standard */
current_std = decoder->current_std;
f->code = V4L2_MBUS_FMT_YUYV10_2X10;
f->width = decoder->std_list[current_std].width;
f->height = decoder->std_list[current_std].height;
f->field = V4L2_FIELD_INTERLACED;
f->colorspace = V4L2_COLORSPACE_SMPTE170M;
v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d\n",
f->width, f->height);
return 0;
}
/**
* tvp514x_g_parm() - V4L2 decoder interface handler for g_parm
* @sd: pointer to standard V4L2 sub-device structure
* @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
*
* Returns the decoder's video CAPTURE parameters.
*/
static int
tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
struct v4l2_captureparm *cparm;
enum tvp514x_std current_std;
if (a == NULL)
return -EINVAL;
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
/* only capture is supported */
return -EINVAL;
/* get the current standard */
current_std = decoder->current_std;
cparm = &a->parm.capture;
cparm->capability = V4L2_CAP_TIMEPERFRAME;
cparm->timeperframe =
decoder->std_list[current_std].standard.frameperiod;
return 0;
}
/**
* tvp514x_s_parm() - V4L2 decoder interface handler for s_parm
* @sd: pointer to standard V4L2 sub-device structure
* @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
*
* Configures the decoder to use the input parameters, if possible. If
* not possible, returns the appropriate error code.
*/
static int
tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
struct v4l2_fract *timeperframe;
enum tvp514x_std current_std;
if (a == NULL)
return -EINVAL;
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
/* only capture is supported */
return -EINVAL;
timeperframe = &a->parm.capture.timeperframe;
/* get the current standard */
current_std = decoder->current_std;
*timeperframe =
decoder->std_list[current_std].standard.frameperiod;
return 0;
}
/**
* tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream
* @sd: pointer to standard V4L2 sub-device structure
* @enable: streaming enable or disable
*
* Sets streaming to enable or disable, if possible.
*/
static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable)
{
int err = 0;
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct tvp514x_decoder *decoder = to_decoder(sd);
if (decoder->streaming == enable)
return 0;
switch (enable) {
case 0:
{
/* Power Down Sequence */
err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01);
if (err) {
v4l2_err(sd, "Unable to turn off decoder\n");
return err;
}
decoder->streaming = enable;
break;
}
case 1:
{
struct tvp514x_reg *int_seq = (struct tvp514x_reg *)
client->driver->id_table->driver_data;
/* Power Up Sequence */
err = tvp514x_write_regs(sd, int_seq);
if (err) {
v4l2_err(sd, "Unable to turn on decoder\n");
return err;
}
/* Detect if not already detected */
err = tvp514x_detect(sd, decoder);
if (err) {
v4l2_err(sd, "Unable to detect decoder\n");
return err;
}
err = tvp514x_configure(sd, decoder);
if (err) {
v4l2_err(sd, "Unable to configure decoder\n");
return err;
}
decoder->streaming = enable;
break;
}
default:
err = -ENODEV;
break;
}
return err;
}
static const struct v4l2_subdev_core_ops tvp514x_core_ops = {
.queryctrl = tvp514x_queryctrl,
.g_ctrl = tvp514x_g_ctrl,
.s_ctrl = tvp514x_s_ctrl,
.s_std = tvp514x_s_std,
};
static const struct v4l2_subdev_video_ops tvp514x_video_ops = {
.s_routing = tvp514x_s_routing,
.querystd = tvp514x_querystd,
.enum_mbus_fmt = tvp514x_enum_mbus_fmt,
.g_mbus_fmt = tvp514x_mbus_fmt,
.try_mbus_fmt = tvp514x_mbus_fmt,
.s_mbus_fmt = tvp514x_mbus_fmt,
.g_parm = tvp514x_g_parm,
.s_parm = tvp514x_s_parm,
.s_stream = tvp514x_s_stream,
};
static const struct v4l2_subdev_ops tvp514x_ops = {
.core = &tvp514x_core_ops,
.video = &tvp514x_video_ops,
};
static struct tvp514x_decoder tvp514x_dev = {
.streaming = 0,
.current_std = STD_NTSC_MJ,
.std_list = tvp514x_std_list,
.num_stds = ARRAY_SIZE(tvp514x_std_list),
};
/**
* tvp514x_probe() - decoder driver i2c probe handler
* @client: i2c driver client device structure
* @id: i2c driver id table
*
* Register decoder as an i2c client device and V4L2
* device.
*/
static int
tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct tvp514x_decoder *decoder;
struct v4l2_subdev *sd;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
if (!client->dev.platform_data) {
v4l2_err(client, "No platform data!!\n");
return -ENODEV;
}
decoder = kzalloc(sizeof(*decoder), GFP_KERNEL);
if (!decoder)
return -ENOMEM;
/* Initialize the tvp514x_decoder with default configuration */
*decoder = tvp514x_dev;
/* Copy default register configuration */
memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
sizeof(tvp514x_reg_list_default));
/* Copy board specific information here */
decoder->pdata = client->dev.platform_data;
/**
* Fetch platform specific data, and configure the
* tvp514x_reg_list[] accordingly. Since this is one
* time configuration, no need to preserve.
*/
decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |=
(decoder->pdata->clk_polarity << 1);
decoder->tvp514x_regs[REG_SYNC_CONTROL].val |=
((decoder->pdata->hs_polarity << 2) |
(decoder->pdata->vs_polarity << 3));
/* Set default standard to auto */
decoder->tvp514x_regs[REG_VIDEO_STD].val =
VIDEO_STD_AUTO_SWITCH_BIT;
/* Register with V4L2 layer as slave device */
sd = &decoder->sd;
v4l2_i2c_subdev_init(sd, client, &tvp514x_ops);
v4l2_info(sd, "%s decoder driver registered !!\n", sd->name);
return 0;
}
/**
* tvp514x_remove() - decoder driver i2c remove handler
* @client: i2c driver client device structure
*
* Unregister decoder as an i2c client device and V4L2
* device. Complement of tvp514x_probe().
*/
static int tvp514x_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct tvp514x_decoder *decoder = to_decoder(sd);
v4l2_device_unregister_subdev(sd);
kfree(decoder);
return 0;
}
/* TVP5146 Init/Power on Sequence */
static const struct tvp514x_reg tvp5146_init_reg_seq[] = {
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80},
{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
{TOK_WRITE, REG_OPERATION_MODE, 0x01},
{TOK_WRITE, REG_OPERATION_MODE, 0x00},
{TOK_TERM, 0, 0},
};
/* TVP5147 Init/Power on Sequence */
static const struct tvp514x_reg tvp5147_init_reg_seq[] = {
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80},
{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x16},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xA0},
{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x16},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
{TOK_WRITE, REG_OPERATION_MODE, 0x01},
{TOK_WRITE, REG_OPERATION_MODE, 0x00},
{TOK_TERM, 0, 0},
};
/* TVP5146M2/TVP5147M1 Init/Power on Sequence */
static const struct tvp514x_reg tvp514xm_init_reg_seq[] = {
{TOK_WRITE, REG_OPERATION_MODE, 0x01},
{TOK_WRITE, REG_OPERATION_MODE, 0x00},
{TOK_TERM, 0, 0},
};
/**
* I2C Device Table -
*
* name - Name of the actual device/chip.
* driver_data - Driver data
*/
static const struct i2c_device_id tvp514x_id[] = {
{"tvp5146", (unsigned long)tvp5146_init_reg_seq},
{"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq},
{"tvp5147", (unsigned long)tvp5147_init_reg_seq},
{"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq},
{},
};
MODULE_DEVICE_TABLE(i2c, tvp514x_id);
static struct i2c_driver tvp514x_driver = {
.driver = {
.owner = THIS_MODULE,
.name = TVP514X_MODULE_NAME,
},
.probe = tvp514x_probe,
.remove = tvp514x_remove,
.id_table = tvp514x_id,
};
static int __init tvp514x_init(void)
{
return i2c_add_driver(&tvp514x_driver);
}
static void __exit tvp514x_exit(void)
{
i2c_del_driver(&tvp514x_driver);
}
module_init(tvp514x_init);
module_exit(tvp514x_exit);
Reference in New Issue View Git Blame Copy Permalink