219 lines
6.2 KiB
C
219 lines
6.2 KiB
C
/*
|
|
* Copyright (C) 2014 Marvell Technology Group Ltd.
|
|
*
|
|
* Antoine Tenart <antoine.tenart@free-electrons.com>
|
|
* Jisheng Zhang <jszhang@marvell.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
|
|
#define USB_PHY_PLL 0x04
|
|
#define USB_PHY_PLL_CONTROL 0x08
|
|
#define USB_PHY_TX_CTRL0 0x10
|
|
#define USB_PHY_TX_CTRL1 0x14
|
|
#define USB_PHY_TX_CTRL2 0x18
|
|
#define USB_PHY_RX_CTRL 0x20
|
|
#define USB_PHY_ANALOG 0x34
|
|
|
|
/* USB_PHY_PLL */
|
|
#define CLK_REF_DIV(x) ((x) << 4)
|
|
#define FEEDBACK_CLK_DIV(x) ((x) << 8)
|
|
|
|
/* USB_PHY_PLL_CONTROL */
|
|
#define CLK_STABLE BIT(0)
|
|
#define PLL_CTRL_PIN BIT(1)
|
|
#define PLL_CTRL_REG BIT(2)
|
|
#define PLL_ON BIT(3)
|
|
#define PHASE_OFF_TOL_125 (0x0 << 5)
|
|
#define PHASE_OFF_TOL_250 BIT(5)
|
|
#define KVC0_CALIB (0x0 << 9)
|
|
#define KVC0_REG_CTRL BIT(9)
|
|
#define KVC0_HIGH (0x0 << 10)
|
|
#define KVC0_LOW (0x3 << 10)
|
|
#define CLK_BLK_EN BIT(13)
|
|
|
|
/* USB_PHY_TX_CTRL0 */
|
|
#define EXT_HS_RCAL_EN BIT(3)
|
|
#define EXT_FS_RCAL_EN BIT(4)
|
|
#define IMPCAL_VTH_DIV(x) ((x) << 5)
|
|
#define EXT_RS_RCAL_DIV(x) ((x) << 8)
|
|
#define EXT_FS_RCAL_DIV(x) ((x) << 12)
|
|
|
|
/* USB_PHY_TX_CTRL1 */
|
|
#define TX_VDD15_14 (0x0 << 4)
|
|
#define TX_VDD15_15 BIT(4)
|
|
#define TX_VDD15_16 (0x2 << 4)
|
|
#define TX_VDD15_17 (0x3 << 4)
|
|
#define TX_VDD12_VDD (0x0 << 6)
|
|
#define TX_VDD12_11 BIT(6)
|
|
#define TX_VDD12_12 (0x2 << 6)
|
|
#define TX_VDD12_13 (0x3 << 6)
|
|
#define LOW_VDD_EN BIT(8)
|
|
#define TX_OUT_AMP(x) ((x) << 9)
|
|
|
|
/* USB_PHY_TX_CTRL2 */
|
|
#define TX_CHAN_CTRL_REG(x) ((x) << 0)
|
|
#define DRV_SLEWRATE(x) ((x) << 4)
|
|
#define IMP_CAL_FS_HS_DLY_0 (0x0 << 6)
|
|
#define IMP_CAL_FS_HS_DLY_1 BIT(6)
|
|
#define IMP_CAL_FS_HS_DLY_2 (0x2 << 6)
|
|
#define IMP_CAL_FS_HS_DLY_3 (0x3 << 6)
|
|
#define FS_DRV_EN_MASK(x) ((x) << 8)
|
|
#define HS_DRV_EN_MASK(x) ((x) << 12)
|
|
|
|
/* USB_PHY_RX_CTRL */
|
|
#define PHASE_FREEZE_DLY_2_CL (0x0 << 0)
|
|
#define PHASE_FREEZE_DLY_4_CL BIT(0)
|
|
#define ACK_LENGTH_8_CL (0x0 << 2)
|
|
#define ACK_LENGTH_12_CL BIT(2)
|
|
#define ACK_LENGTH_16_CL (0x2 << 2)
|
|
#define ACK_LENGTH_20_CL (0x3 << 2)
|
|
#define SQ_LENGTH_3 (0x0 << 4)
|
|
#define SQ_LENGTH_6 BIT(4)
|
|
#define SQ_LENGTH_9 (0x2 << 4)
|
|
#define SQ_LENGTH_12 (0x3 << 4)
|
|
#define DISCON_THRESHOLD_260 (0x0 << 6)
|
|
#define DISCON_THRESHOLD_270 BIT(6)
|
|
#define DISCON_THRESHOLD_280 (0x2 << 6)
|
|
#define DISCON_THRESHOLD_290 (0x3 << 6)
|
|
#define SQ_THRESHOLD(x) ((x) << 8)
|
|
#define LPF_COEF(x) ((x) << 12)
|
|
#define INTPL_CUR_10 (0x0 << 14)
|
|
#define INTPL_CUR_20 BIT(14)
|
|
#define INTPL_CUR_30 (0x2 << 14)
|
|
#define INTPL_CUR_40 (0x3 << 14)
|
|
|
|
/* USB_PHY_ANALOG */
|
|
#define ANA_PWR_UP BIT(1)
|
|
#define ANA_PWR_DOWN BIT(2)
|
|
#define V2I_VCO_RATIO(x) ((x) << 7)
|
|
#define R_ROTATE_90 (0x0 << 10)
|
|
#define R_ROTATE_0 BIT(10)
|
|
#define MODE_TEST_EN BIT(11)
|
|
#define ANA_TEST_DC_CTRL(x) ((x) << 12)
|
|
|
|
static const u32 phy_berlin_pll_dividers[] = {
|
|
/* Berlin 2 */
|
|
CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
|
|
/* Berlin 2CD */
|
|
CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
|
|
};
|
|
|
|
struct phy_berlin_usb_priv {
|
|
void __iomem *base;
|
|
struct reset_control *rst_ctrl;
|
|
u32 pll_divider;
|
|
};
|
|
|
|
static int phy_berlin_usb_power_on(struct phy *phy)
|
|
{
|
|
struct phy_berlin_usb_priv *priv = phy_get_drvdata(phy);
|
|
|
|
reset_control_reset(priv->rst_ctrl);
|
|
|
|
writel(priv->pll_divider,
|
|
priv->base + USB_PHY_PLL);
|
|
writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL |
|
|
CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL);
|
|
writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5),
|
|
priv->base + USB_PHY_ANALOG);
|
|
writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 |
|
|
DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
|
|
INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL);
|
|
|
|
writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1);
|
|
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
|
|
priv->base + USB_PHY_TX_CTRL0);
|
|
|
|
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) |
|
|
EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0);
|
|
|
|
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
|
|
priv->base + USB_PHY_TX_CTRL0);
|
|
writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 |
|
|
FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_ops phy_berlin_usb_ops = {
|
|
.power_on = phy_berlin_usb_power_on,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id phy_berlin_sata_of_match[] = {
|
|
{
|
|
.compatible = "marvell,berlin2-usb-phy",
|
|
.data = &phy_berlin_pll_dividers[0],
|
|
},
|
|
{
|
|
.compatible = "marvell,berlin2cd-usb-phy",
|
|
.data = &phy_berlin_pll_dividers[1],
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
|
|
|
|
static int phy_berlin_usb_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match =
|
|
of_match_device(phy_berlin_sata_of_match, &pdev->dev);
|
|
struct phy_berlin_usb_priv *priv;
|
|
struct resource *res;
|
|
struct phy *phy;
|
|
struct phy_provider *phy_provider;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL);
|
|
if (IS_ERR(priv->rst_ctrl))
|
|
return PTR_ERR(priv->rst_ctrl);
|
|
|
|
priv->pll_divider = *((u32 *)match->data);
|
|
|
|
phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops);
|
|
if (IS_ERR(phy)) {
|
|
dev_err(&pdev->dev, "failed to create PHY\n");
|
|
return PTR_ERR(phy);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
phy_set_drvdata(phy, priv);
|
|
|
|
phy_provider =
|
|
devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static struct platform_driver phy_berlin_usb_driver = {
|
|
.probe = phy_berlin_usb_probe,
|
|
.driver = {
|
|
.name = "phy-berlin-usb",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = phy_berlin_sata_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(phy_berlin_usb_driver);
|
|
|
|
MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Marvell Berlin PHY driver for USB");
|
|
MODULE_LICENSE("GPL");
|