344 lines
9.5 KiB
C
344 lines
9.5 KiB
C
/*
|
|
* This file contains code to reset and initialize USB host controllers.
|
|
* Some of it includes work-arounds for PCI hardware and BIOS quirks.
|
|
* It may need to run early during booting -- before USB would normally
|
|
* initialize -- to ensure that Linux doesn't use any legacy modes.
|
|
*
|
|
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
|
|
* (and others)
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/acpi.h>
|
|
|
|
|
|
#define UHCI_USBLEGSUP 0xc0 /* legacy support */
|
|
#define UHCI_USBCMD 0 /* command register */
|
|
#define UHCI_USBINTR 4 /* interrupt register */
|
|
#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
|
|
#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
|
|
#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
|
|
#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
|
|
#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
|
|
#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
|
|
#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
|
|
|
|
#define OHCI_CONTROL 0x04
|
|
#define OHCI_CMDSTATUS 0x08
|
|
#define OHCI_INTRSTATUS 0x0c
|
|
#define OHCI_INTRENABLE 0x10
|
|
#define OHCI_INTRDISABLE 0x14
|
|
#define OHCI_OCR (1 << 3) /* ownership change request */
|
|
#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
|
|
#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
|
|
#define OHCI_INTR_OC (1 << 30) /* ownership change */
|
|
|
|
#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
|
|
#define EHCI_USBCMD 0 /* command register */
|
|
#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
|
|
#define EHCI_USBSTS 4 /* status register */
|
|
#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
|
|
#define EHCI_USBINTR 8 /* interrupt register */
|
|
#define EHCI_USBLEGSUP 0 /* legacy support register */
|
|
#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
|
|
#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
|
|
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
|
|
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
|
|
|
|
|
|
/*
|
|
* Make sure the controller is completely inactive, unable to
|
|
* generate interrupts or do DMA.
|
|
*/
|
|
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
|
|
{
|
|
/* Turn off PIRQ enable and SMI enable. (This also turns off the
|
|
* BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
|
|
*/
|
|
pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
|
|
|
|
/* Reset the HC - this will force us to get a
|
|
* new notification of any already connected
|
|
* ports due to the virtual disconnect that it
|
|
* implies.
|
|
*/
|
|
outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
|
|
mb();
|
|
udelay(5);
|
|
if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
|
|
dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
|
|
|
|
/* Just to be safe, disable interrupt requests and
|
|
* make sure the controller is stopped.
|
|
*/
|
|
outw(0, base + UHCI_USBINTR);
|
|
outw(0, base + UHCI_USBCMD);
|
|
}
|
|
EXPORT_SYMBOL_GPL(uhci_reset_hc);
|
|
|
|
/*
|
|
* Initialize a controller that was newly discovered or has just been
|
|
* resumed. In either case we can't be sure of its previous state.
|
|
*
|
|
* Returns: 1 if the controller was reset, 0 otherwise.
|
|
*/
|
|
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
|
|
{
|
|
u16 legsup;
|
|
unsigned int cmd, intr;
|
|
|
|
/*
|
|
* When restarting a suspended controller, we expect all the
|
|
* settings to be the same as we left them:
|
|
*
|
|
* PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
|
|
* Controller is stopped and configured with EGSM set;
|
|
* No interrupts enabled except possibly Resume Detect.
|
|
*
|
|
* If any of these conditions are violated we do a complete reset.
|
|
*/
|
|
pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
|
|
if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
|
|
dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
|
|
__FUNCTION__, legsup);
|
|
goto reset_needed;
|
|
}
|
|
|
|
cmd = inw(base + UHCI_USBCMD);
|
|
if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
|
|
!(cmd & UHCI_USBCMD_EGSM)) {
|
|
dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
|
|
__FUNCTION__, cmd);
|
|
goto reset_needed;
|
|
}
|
|
|
|
intr = inw(base + UHCI_USBINTR);
|
|
if (intr & (~UHCI_USBINTR_RESUME)) {
|
|
dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
|
|
__FUNCTION__, intr);
|
|
goto reset_needed;
|
|
}
|
|
return 0;
|
|
|
|
reset_needed:
|
|
dev_dbg(&pdev->dev, "Performing full reset\n");
|
|
uhci_reset_hc(pdev, base);
|
|
return 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
|
|
|
|
static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
|
|
{
|
|
u16 cmd;
|
|
return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
|
|
}
|
|
|
|
#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
|
|
#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
|
|
|
|
static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
|
|
{
|
|
unsigned long base = 0;
|
|
int i;
|
|
|
|
if (!pio_enabled(pdev))
|
|
return;
|
|
|
|
for (i = 0; i < PCI_ROM_RESOURCE; i++)
|
|
if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
|
|
base = pci_resource_start(pdev, i);
|
|
break;
|
|
}
|
|
|
|
if (base)
|
|
uhci_check_and_reset_hc(pdev, base);
|
|
}
|
|
|
|
static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx)
|
|
{
|
|
return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
|
|
}
|
|
|
|
static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
|
|
{
|
|
void __iomem *base;
|
|
int wait_time;
|
|
u32 control;
|
|
|
|
if (!mmio_resource_enabled(pdev, 0))
|
|
return;
|
|
|
|
base = ioremap_nocache(pci_resource_start(pdev, 0),
|
|
pci_resource_len(pdev, 0));
|
|
if (base == NULL) return;
|
|
|
|
/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
|
|
#ifndef __hppa__
|
|
control = readl(base + OHCI_CONTROL);
|
|
if (control & OHCI_CTRL_IR) {
|
|
wait_time = 500; /* arbitrary; 5 seconds */
|
|
writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
|
|
writel(OHCI_OCR, base + OHCI_CMDSTATUS);
|
|
while (wait_time > 0 &&
|
|
readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
|
|
wait_time -= 10;
|
|
msleep(10);
|
|
}
|
|
if (wait_time <= 0)
|
|
printk(KERN_WARNING "%s %s: BIOS handoff "
|
|
"failed (BIOS bug ?)\n",
|
|
pdev->dev.bus_id, "OHCI");
|
|
|
|
/* reset controller, preserving RWC */
|
|
writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* disable interrupts
|
|
*/
|
|
writel(~(u32)0, base + OHCI_INTRDISABLE);
|
|
writel(~(u32)0, base + OHCI_INTRSTATUS);
|
|
|
|
iounmap(base);
|
|
}
|
|
|
|
static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
|
|
{
|
|
int wait_time, delta;
|
|
void __iomem *base, *op_reg_base;
|
|
u32 hcc_params, val;
|
|
u8 offset, cap_length;
|
|
int count = 256/4;
|
|
|
|
if (!mmio_resource_enabled(pdev, 0))
|
|
return;
|
|
|
|
base = ioremap_nocache(pci_resource_start(pdev, 0),
|
|
pci_resource_len(pdev, 0));
|
|
if (base == NULL) return;
|
|
|
|
cap_length = readb(base);
|
|
op_reg_base = base + cap_length;
|
|
|
|
/* EHCI 0.96 and later may have "extended capabilities"
|
|
* spec section 5.1 explains the bios handoff, e.g. for
|
|
* booting from USB disk or using a usb keyboard
|
|
*/
|
|
hcc_params = readl(base + EHCI_HCC_PARAMS);
|
|
offset = (hcc_params >> 8) & 0xff;
|
|
while (offset && count--) {
|
|
u32 cap;
|
|
int msec;
|
|
|
|
pci_read_config_dword(pdev, offset, &cap);
|
|
switch (cap & 0xff) {
|
|
case 1: /* BIOS/SMM/... handoff support */
|
|
if ((cap & EHCI_USBLEGSUP_BIOS)) {
|
|
pr_debug("%s %s: BIOS handoff\n",
|
|
pdev->dev.bus_id, "EHCI");
|
|
|
|
/* BIOS workaround (?): be sure the
|
|
* pre-Linux code receives the SMI
|
|
*/
|
|
pci_read_config_dword(pdev,
|
|
offset + EHCI_USBLEGCTLSTS,
|
|
&val);
|
|
pci_write_config_dword(pdev,
|
|
offset + EHCI_USBLEGCTLSTS,
|
|
val | EHCI_USBLEGCTLSTS_SOOE);
|
|
}
|
|
|
|
/* always say Linux will own the hardware
|
|
* by setting EHCI_USBLEGSUP_OS.
|
|
*/
|
|
pci_write_config_byte(pdev, offset + 3, 1);
|
|
|
|
/* if boot firmware now owns EHCI, spin till
|
|
* it hands it over.
|
|
*/
|
|
msec = 5000;
|
|
while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
|
|
msleep(10);
|
|
msec -= 10;
|
|
pci_read_config_dword(pdev, offset, &cap);
|
|
}
|
|
|
|
if (cap & EHCI_USBLEGSUP_BIOS) {
|
|
/* well, possibly buggy BIOS... try to shut
|
|
* it down, and hope nothing goes too wrong
|
|
*/
|
|
printk(KERN_WARNING "%s %s: BIOS handoff "
|
|
"failed (BIOS bug ?)\n",
|
|
pdev->dev.bus_id, "EHCI");
|
|
pci_write_config_byte(pdev, offset + 2, 0);
|
|
}
|
|
|
|
/* just in case, always disable EHCI SMIs */
|
|
pci_write_config_dword(pdev,
|
|
offset + EHCI_USBLEGCTLSTS,
|
|
0);
|
|
break;
|
|
case 0: /* illegal reserved capability */
|
|
cap = 0;
|
|
/* FALLTHROUGH */
|
|
default:
|
|
printk(KERN_WARNING "%s %s: unrecognized "
|
|
"capability %02x\n",
|
|
pdev->dev.bus_id, "EHCI",
|
|
cap & 0xff);
|
|
break;
|
|
}
|
|
offset = (cap >> 8) & 0xff;
|
|
}
|
|
if (!count)
|
|
printk(KERN_DEBUG "%s %s: capability loop?\n",
|
|
pdev->dev.bus_id, "EHCI");
|
|
|
|
/*
|
|
* halt EHCI & disable its interrupts in any case
|
|
*/
|
|
val = readl(op_reg_base + EHCI_USBSTS);
|
|
if ((val & EHCI_USBSTS_HALTED) == 0) {
|
|
val = readl(op_reg_base + EHCI_USBCMD);
|
|
val &= ~EHCI_USBCMD_RUN;
|
|
writel(val, op_reg_base + EHCI_USBCMD);
|
|
|
|
wait_time = 2000;
|
|
delta = 100;
|
|
do {
|
|
writel(0x3f, op_reg_base + EHCI_USBSTS);
|
|
udelay(delta);
|
|
wait_time -= delta;
|
|
val = readl(op_reg_base + EHCI_USBSTS);
|
|
if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
|
|
break;
|
|
}
|
|
} while (wait_time > 0);
|
|
}
|
|
writel(0, op_reg_base + EHCI_USBINTR);
|
|
writel(0x3f, op_reg_base + EHCI_USBSTS);
|
|
|
|
iounmap(base);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
|
|
static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
|
|
{
|
|
if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
|
|
quirk_usb_handoff_uhci(pdev);
|
|
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
|
|
quirk_usb_handoff_ohci(pdev);
|
|
else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
|
|
quirk_usb_disable_ehci(pdev);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
|