2559 lines
75 KiB
C
2559 lines
75 KiB
C
/*
|
|
* Copyright (c) 2017 Hisilicon Limited.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include "hisi_sas.h"
|
|
#define DRV_NAME "hisi_sas_v3_hw"
|
|
|
|
/* global registers need init*/
|
|
#define DLVRY_QUEUE_ENABLE 0x0
|
|
#define IOST_BASE_ADDR_LO 0x8
|
|
#define IOST_BASE_ADDR_HI 0xc
|
|
#define ITCT_BASE_ADDR_LO 0x10
|
|
#define ITCT_BASE_ADDR_HI 0x14
|
|
#define IO_BROKEN_MSG_ADDR_LO 0x18
|
|
#define IO_BROKEN_MSG_ADDR_HI 0x1c
|
|
#define PHY_CONTEXT 0x20
|
|
#define PHY_STATE 0x24
|
|
#define PHY_PORT_NUM_MA 0x28
|
|
#define PHY_CONN_RATE 0x30
|
|
#define ITCT_CLR 0x44
|
|
#define ITCT_CLR_EN_OFF 16
|
|
#define ITCT_CLR_EN_MSK (0x1 << ITCT_CLR_EN_OFF)
|
|
#define ITCT_DEV_OFF 0
|
|
#define ITCT_DEV_MSK (0x7ff << ITCT_DEV_OFF)
|
|
#define IO_SATA_BROKEN_MSG_ADDR_LO 0x58
|
|
#define IO_SATA_BROKEN_MSG_ADDR_HI 0x5c
|
|
#define SATA_INITI_D2H_STORE_ADDR_LO 0x60
|
|
#define SATA_INITI_D2H_STORE_ADDR_HI 0x64
|
|
#define CFG_MAX_TAG 0x68
|
|
#define HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL 0x84
|
|
#define HGC_SAS_TXFAIL_RETRY_CTRL 0x88
|
|
#define HGC_GET_ITV_TIME 0x90
|
|
#define DEVICE_MSG_WORK_MODE 0x94
|
|
#define OPENA_WT_CONTI_TIME 0x9c
|
|
#define I_T_NEXUS_LOSS_TIME 0xa0
|
|
#define MAX_CON_TIME_LIMIT_TIME 0xa4
|
|
#define BUS_INACTIVE_LIMIT_TIME 0xa8
|
|
#define REJECT_TO_OPEN_LIMIT_TIME 0xac
|
|
#define CFG_AGING_TIME 0xbc
|
|
#define HGC_DFX_CFG2 0xc0
|
|
#define CFG_ABT_SET_QUERY_IPTT 0xd4
|
|
#define CFG_SET_ABORTED_IPTT_OFF 0
|
|
#define CFG_SET_ABORTED_IPTT_MSK (0xfff << CFG_SET_ABORTED_IPTT_OFF)
|
|
#define CFG_SET_ABORTED_EN_OFF 12
|
|
#define CFG_ABT_SET_IPTT_DONE 0xd8
|
|
#define CFG_ABT_SET_IPTT_DONE_OFF 0
|
|
#define HGC_IOMB_PROC1_STATUS 0x104
|
|
#define CFG_1US_TIMER_TRSH 0xcc
|
|
#define CHNL_INT_STATUS 0x148
|
|
#define HGC_AXI_FIFO_ERR_INFO 0x154
|
|
#define AXI_ERR_INFO_OFF 0
|
|
#define AXI_ERR_INFO_MSK (0xff << AXI_ERR_INFO_OFF)
|
|
#define FIFO_ERR_INFO_OFF 8
|
|
#define FIFO_ERR_INFO_MSK (0xff << FIFO_ERR_INFO_OFF)
|
|
#define INT_COAL_EN 0x19c
|
|
#define OQ_INT_COAL_TIME 0x1a0
|
|
#define OQ_INT_COAL_CNT 0x1a4
|
|
#define ENT_INT_COAL_TIME 0x1a8
|
|
#define ENT_INT_COAL_CNT 0x1ac
|
|
#define OQ_INT_SRC 0x1b0
|
|
#define OQ_INT_SRC_MSK 0x1b4
|
|
#define ENT_INT_SRC1 0x1b8
|
|
#define ENT_INT_SRC1_D2H_FIS_CH0_OFF 0
|
|
#define ENT_INT_SRC1_D2H_FIS_CH0_MSK (0x1 << ENT_INT_SRC1_D2H_FIS_CH0_OFF)
|
|
#define ENT_INT_SRC1_D2H_FIS_CH1_OFF 8
|
|
#define ENT_INT_SRC1_D2H_FIS_CH1_MSK (0x1 << ENT_INT_SRC1_D2H_FIS_CH1_OFF)
|
|
#define ENT_INT_SRC2 0x1bc
|
|
#define ENT_INT_SRC3 0x1c0
|
|
#define ENT_INT_SRC3_WP_DEPTH_OFF 8
|
|
#define ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF 9
|
|
#define ENT_INT_SRC3_RP_DEPTH_OFF 10
|
|
#define ENT_INT_SRC3_AXI_OFF 11
|
|
#define ENT_INT_SRC3_FIFO_OFF 12
|
|
#define ENT_INT_SRC3_LM_OFF 14
|
|
#define ENT_INT_SRC3_ITC_INT_OFF 15
|
|
#define ENT_INT_SRC3_ITC_INT_MSK (0x1 << ENT_INT_SRC3_ITC_INT_OFF)
|
|
#define ENT_INT_SRC3_ABT_OFF 16
|
|
#define ENT_INT_SRC_MSK1 0x1c4
|
|
#define ENT_INT_SRC_MSK2 0x1c8
|
|
#define ENT_INT_SRC_MSK3 0x1cc
|
|
#define ENT_INT_SRC_MSK3_ENT95_MSK_OFF 31
|
|
#define CHNL_PHYUPDOWN_INT_MSK 0x1d0
|
|
#define CHNL_ENT_INT_MSK 0x1d4
|
|
#define HGC_COM_INT_MSK 0x1d8
|
|
#define ENT_INT_SRC_MSK3_ENT95_MSK_MSK (0x1 << ENT_INT_SRC_MSK3_ENT95_MSK_OFF)
|
|
#define SAS_ECC_INTR 0x1e8
|
|
#define SAS_ECC_INTR_MSK 0x1ec
|
|
#define HGC_ERR_STAT_EN 0x238
|
|
#define CQE_SEND_CNT 0x248
|
|
#define DLVRY_Q_0_BASE_ADDR_LO 0x260
|
|
#define DLVRY_Q_0_BASE_ADDR_HI 0x264
|
|
#define DLVRY_Q_0_DEPTH 0x268
|
|
#define DLVRY_Q_0_WR_PTR 0x26c
|
|
#define DLVRY_Q_0_RD_PTR 0x270
|
|
#define HYPER_STREAM_ID_EN_CFG 0xc80
|
|
#define OQ0_INT_SRC_MSK 0xc90
|
|
#define COMPL_Q_0_BASE_ADDR_LO 0x4e0
|
|
#define COMPL_Q_0_BASE_ADDR_HI 0x4e4
|
|
#define COMPL_Q_0_DEPTH 0x4e8
|
|
#define COMPL_Q_0_WR_PTR 0x4ec
|
|
#define COMPL_Q_0_RD_PTR 0x4f0
|
|
#define AWQOS_AWCACHE_CFG 0xc84
|
|
#define ARQOS_ARCACHE_CFG 0xc88
|
|
#define HILINK_ERR_DFX 0xe04
|
|
#define SAS_GPIO_CFG_0 0x1000
|
|
#define SAS_GPIO_CFG_1 0x1004
|
|
#define SAS_GPIO_TX_0_1 0x1040
|
|
#define SAS_CFG_DRIVE_VLD 0x1070
|
|
|
|
/* phy registers requiring init */
|
|
#define PORT_BASE (0x2000)
|
|
#define PHY_CFG (PORT_BASE + 0x0)
|
|
#define HARD_PHY_LINKRATE (PORT_BASE + 0x4)
|
|
#define PHY_CFG_ENA_OFF 0
|
|
#define PHY_CFG_ENA_MSK (0x1 << PHY_CFG_ENA_OFF)
|
|
#define PHY_CFG_DC_OPT_OFF 2
|
|
#define PHY_CFG_DC_OPT_MSK (0x1 << PHY_CFG_DC_OPT_OFF)
|
|
#define PROG_PHY_LINK_RATE (PORT_BASE + 0x8)
|
|
#define PHY_CTRL (PORT_BASE + 0x14)
|
|
#define PHY_CTRL_RESET_OFF 0
|
|
#define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF)
|
|
#define SL_CFG (PORT_BASE + 0x84)
|
|
#define SL_CONTROL (PORT_BASE + 0x94)
|
|
#define SL_CONTROL_NOTIFY_EN_OFF 0
|
|
#define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF)
|
|
#define SL_CTA_OFF 17
|
|
#define SL_CTA_MSK (0x1 << SL_CTA_OFF)
|
|
#define TX_ID_DWORD0 (PORT_BASE + 0x9c)
|
|
#define TX_ID_DWORD1 (PORT_BASE + 0xa0)
|
|
#define TX_ID_DWORD2 (PORT_BASE + 0xa4)
|
|
#define TX_ID_DWORD3 (PORT_BASE + 0xa8)
|
|
#define TX_ID_DWORD4 (PORT_BASE + 0xaC)
|
|
#define TX_ID_DWORD5 (PORT_BASE + 0xb0)
|
|
#define TX_ID_DWORD6 (PORT_BASE + 0xb4)
|
|
#define TXID_AUTO (PORT_BASE + 0xb8)
|
|
#define CT3_OFF 1
|
|
#define CT3_MSK (0x1 << CT3_OFF)
|
|
#define TX_HARDRST_OFF 2
|
|
#define TX_HARDRST_MSK (0x1 << TX_HARDRST_OFF)
|
|
#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
|
|
#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
|
|
#define STP_LINK_TIMER (PORT_BASE + 0x120)
|
|
#define STP_LINK_TIMEOUT_STATE (PORT_BASE + 0x124)
|
|
#define CON_CFG_DRIVER (PORT_BASE + 0x130)
|
|
#define SAS_SSP_CON_TIMER_CFG (PORT_BASE + 0x134)
|
|
#define SAS_SMP_CON_TIMER_CFG (PORT_BASE + 0x138)
|
|
#define SAS_STP_CON_TIMER_CFG (PORT_BASE + 0x13c)
|
|
#define CHL_INT0 (PORT_BASE + 0x1b4)
|
|
#define CHL_INT0_HOTPLUG_TOUT_OFF 0
|
|
#define CHL_INT0_HOTPLUG_TOUT_MSK (0x1 << CHL_INT0_HOTPLUG_TOUT_OFF)
|
|
#define CHL_INT0_SL_RX_BCST_ACK_OFF 1
|
|
#define CHL_INT0_SL_RX_BCST_ACK_MSK (0x1 << CHL_INT0_SL_RX_BCST_ACK_OFF)
|
|
#define CHL_INT0_SL_PHY_ENABLE_OFF 2
|
|
#define CHL_INT0_SL_PHY_ENABLE_MSK (0x1 << CHL_INT0_SL_PHY_ENABLE_OFF)
|
|
#define CHL_INT0_NOT_RDY_OFF 4
|
|
#define CHL_INT0_NOT_RDY_MSK (0x1 << CHL_INT0_NOT_RDY_OFF)
|
|
#define CHL_INT0_PHY_RDY_OFF 5
|
|
#define CHL_INT0_PHY_RDY_MSK (0x1 << CHL_INT0_PHY_RDY_OFF)
|
|
#define CHL_INT1 (PORT_BASE + 0x1b8)
|
|
#define CHL_INT1_DMAC_TX_ECC_ERR_OFF 15
|
|
#define CHL_INT1_DMAC_TX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_TX_ECC_ERR_OFF)
|
|
#define CHL_INT1_DMAC_RX_ECC_ERR_OFF 17
|
|
#define CHL_INT1_DMAC_RX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_RX_ECC_ERR_OFF)
|
|
#define CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF 19
|
|
#define CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF 20
|
|
#define CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF 21
|
|
#define CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF 22
|
|
#define CHL_INT2 (PORT_BASE + 0x1bc)
|
|
#define CHL_INT2_SL_IDAF_TOUT_CONF_OFF 0
|
|
#define CHL_INT2_RX_INVLD_DW_OFF 30
|
|
#define CHL_INT2_STP_LINK_TIMEOUT_OFF 31
|
|
#define CHL_INT0_MSK (PORT_BASE + 0x1c0)
|
|
#define CHL_INT1_MSK (PORT_BASE + 0x1c4)
|
|
#define CHL_INT2_MSK (PORT_BASE + 0x1c8)
|
|
#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0)
|
|
#define SAS_RX_TRAIN_TIMER (PORT_BASE + 0x2a4)
|
|
#define PHY_CTRL_RDY_MSK (PORT_BASE + 0x2b0)
|
|
#define PHYCTRL_NOT_RDY_MSK (PORT_BASE + 0x2b4)
|
|
#define PHYCTRL_DWS_RESET_MSK (PORT_BASE + 0x2b8)
|
|
#define PHYCTRL_PHY_ENA_MSK (PORT_BASE + 0x2bc)
|
|
#define SL_RX_BCAST_CHK_MSK (PORT_BASE + 0x2c0)
|
|
#define PHYCTRL_OOB_RESTART_MSK (PORT_BASE + 0x2c4)
|
|
#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
|
|
#define DMA_TX_STATUS_BUSY_OFF 0
|
|
#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
|
|
#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
|
|
#define DMA_RX_STATUS_BUSY_OFF 0
|
|
#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
|
|
|
|
#define COARSETUNE_TIME (PORT_BASE + 0x304)
|
|
#define ERR_CNT_DWS_LOST (PORT_BASE + 0x380)
|
|
#define ERR_CNT_RESET_PROB (PORT_BASE + 0x384)
|
|
#define ERR_CNT_INVLD_DW (PORT_BASE + 0x390)
|
|
#define ERR_CNT_DISP_ERR (PORT_BASE + 0x398)
|
|
|
|
#define DEFAULT_ITCT_HW 2048 /* reset value, not reprogrammed */
|
|
#if (HISI_SAS_MAX_DEVICES > DEFAULT_ITCT_HW)
|
|
#error Max ITCT exceeded
|
|
#endif
|
|
|
|
#define AXI_MASTER_CFG_BASE (0x5000)
|
|
#define AM_CTRL_GLOBAL (0x0)
|
|
#define AM_CURR_TRANS_RETURN (0x150)
|
|
|
|
#define AM_CFG_MAX_TRANS (0x5010)
|
|
#define AM_CFG_SINGLE_PORT_MAX_TRANS (0x5014)
|
|
#define AXI_CFG (0x5100)
|
|
#define AM_ROB_ECC_ERR_ADDR (0x510c)
|
|
#define AM_ROB_ECC_ONEBIT_ERR_ADDR_OFF 0
|
|
#define AM_ROB_ECC_ONEBIT_ERR_ADDR_MSK (0xff << AM_ROB_ECC_ONEBIT_ERR_ADDR_OFF)
|
|
#define AM_ROB_ECC_MULBIT_ERR_ADDR_OFF 8
|
|
#define AM_ROB_ECC_MULBIT_ERR_ADDR_MSK (0xff << AM_ROB_ECC_MULBIT_ERR_ADDR_OFF)
|
|
|
|
/* RAS registers need init */
|
|
#define RAS_BASE (0x6000)
|
|
#define SAS_RAS_INTR0 (RAS_BASE)
|
|
#define SAS_RAS_INTR1 (RAS_BASE + 0x04)
|
|
#define SAS_RAS_INTR0_MASK (RAS_BASE + 0x08)
|
|
#define SAS_RAS_INTR1_MASK (RAS_BASE + 0x0c)
|
|
#define CFG_SAS_RAS_INTR_MASK (RAS_BASE + 0x1c)
|
|
#define SAS_RAS_INTR2 (RAS_BASE + 0x20)
|
|
#define SAS_RAS_INTR2_MASK (RAS_BASE + 0x24)
|
|
|
|
/* HW dma structures */
|
|
/* Delivery queue header */
|
|
/* dw0 */
|
|
#define CMD_HDR_ABORT_FLAG_OFF 0
|
|
#define CMD_HDR_ABORT_FLAG_MSK (0x3 << CMD_HDR_ABORT_FLAG_OFF)
|
|
#define CMD_HDR_ABORT_DEVICE_TYPE_OFF 2
|
|
#define CMD_HDR_ABORT_DEVICE_TYPE_MSK (0x1 << CMD_HDR_ABORT_DEVICE_TYPE_OFF)
|
|
#define CMD_HDR_RESP_REPORT_OFF 5
|
|
#define CMD_HDR_RESP_REPORT_MSK (0x1 << CMD_HDR_RESP_REPORT_OFF)
|
|
#define CMD_HDR_TLR_CTRL_OFF 6
|
|
#define CMD_HDR_TLR_CTRL_MSK (0x3 << CMD_HDR_TLR_CTRL_OFF)
|
|
#define CMD_HDR_PORT_OFF 18
|
|
#define CMD_HDR_PORT_MSK (0xf << CMD_HDR_PORT_OFF)
|
|
#define CMD_HDR_PRIORITY_OFF 27
|
|
#define CMD_HDR_PRIORITY_MSK (0x1 << CMD_HDR_PRIORITY_OFF)
|
|
#define CMD_HDR_CMD_OFF 29
|
|
#define CMD_HDR_CMD_MSK (0x7 << CMD_HDR_CMD_OFF)
|
|
/* dw1 */
|
|
#define CMD_HDR_UNCON_CMD_OFF 3
|
|
#define CMD_HDR_DIR_OFF 5
|
|
#define CMD_HDR_DIR_MSK (0x3 << CMD_HDR_DIR_OFF)
|
|
#define CMD_HDR_RESET_OFF 7
|
|
#define CMD_HDR_RESET_MSK (0x1 << CMD_HDR_RESET_OFF)
|
|
#define CMD_HDR_VDTL_OFF 10
|
|
#define CMD_HDR_VDTL_MSK (0x1 << CMD_HDR_VDTL_OFF)
|
|
#define CMD_HDR_FRAME_TYPE_OFF 11
|
|
#define CMD_HDR_FRAME_TYPE_MSK (0x1f << CMD_HDR_FRAME_TYPE_OFF)
|
|
#define CMD_HDR_DEV_ID_OFF 16
|
|
#define CMD_HDR_DEV_ID_MSK (0xffff << CMD_HDR_DEV_ID_OFF)
|
|
/* dw2 */
|
|
#define CMD_HDR_CFL_OFF 0
|
|
#define CMD_HDR_CFL_MSK (0x1ff << CMD_HDR_CFL_OFF)
|
|
#define CMD_HDR_NCQ_TAG_OFF 10
|
|
#define CMD_HDR_NCQ_TAG_MSK (0x1f << CMD_HDR_NCQ_TAG_OFF)
|
|
#define CMD_HDR_MRFL_OFF 15
|
|
#define CMD_HDR_MRFL_MSK (0x1ff << CMD_HDR_MRFL_OFF)
|
|
#define CMD_HDR_SG_MOD_OFF 24
|
|
#define CMD_HDR_SG_MOD_MSK (0x3 << CMD_HDR_SG_MOD_OFF)
|
|
/* dw3 */
|
|
#define CMD_HDR_IPTT_OFF 0
|
|
#define CMD_HDR_IPTT_MSK (0xffff << CMD_HDR_IPTT_OFF)
|
|
/* dw6 */
|
|
#define CMD_HDR_DIF_SGL_LEN_OFF 0
|
|
#define CMD_HDR_DIF_SGL_LEN_MSK (0xffff << CMD_HDR_DIF_SGL_LEN_OFF)
|
|
#define CMD_HDR_DATA_SGL_LEN_OFF 16
|
|
#define CMD_HDR_DATA_SGL_LEN_MSK (0xffff << CMD_HDR_DATA_SGL_LEN_OFF)
|
|
/* dw7 */
|
|
#define CMD_HDR_ADDR_MODE_SEL_OFF 15
|
|
#define CMD_HDR_ADDR_MODE_SEL_MSK (1 << CMD_HDR_ADDR_MODE_SEL_OFF)
|
|
#define CMD_HDR_ABORT_IPTT_OFF 16
|
|
#define CMD_HDR_ABORT_IPTT_MSK (0xffff << CMD_HDR_ABORT_IPTT_OFF)
|
|
|
|
/* Completion header */
|
|
/* dw0 */
|
|
#define CMPLT_HDR_CMPLT_OFF 0
|
|
#define CMPLT_HDR_CMPLT_MSK (0x3 << CMPLT_HDR_CMPLT_OFF)
|
|
#define CMPLT_HDR_ERROR_PHASE_OFF 2
|
|
#define CMPLT_HDR_ERROR_PHASE_MSK (0xff << CMPLT_HDR_ERROR_PHASE_OFF)
|
|
#define CMPLT_HDR_RSPNS_XFRD_OFF 10
|
|
#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
|
|
#define CMPLT_HDR_ERX_OFF 12
|
|
#define CMPLT_HDR_ERX_MSK (0x1 << CMPLT_HDR_ERX_OFF)
|
|
#define CMPLT_HDR_ABORT_STAT_OFF 13
|
|
#define CMPLT_HDR_ABORT_STAT_MSK (0x7 << CMPLT_HDR_ABORT_STAT_OFF)
|
|
/* abort_stat */
|
|
#define STAT_IO_NOT_VALID 0x1
|
|
#define STAT_IO_NO_DEVICE 0x2
|
|
#define STAT_IO_COMPLETE 0x3
|
|
#define STAT_IO_ABORTED 0x4
|
|
/* dw1 */
|
|
#define CMPLT_HDR_IPTT_OFF 0
|
|
#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
|
|
#define CMPLT_HDR_DEV_ID_OFF 16
|
|
#define CMPLT_HDR_DEV_ID_MSK (0xffff << CMPLT_HDR_DEV_ID_OFF)
|
|
/* dw3 */
|
|
#define CMPLT_HDR_IO_IN_TARGET_OFF 17
|
|
#define CMPLT_HDR_IO_IN_TARGET_MSK (0x1 << CMPLT_HDR_IO_IN_TARGET_OFF)
|
|
|
|
/* ITCT header */
|
|
/* qw0 */
|
|
#define ITCT_HDR_DEV_TYPE_OFF 0
|
|
#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF)
|
|
#define ITCT_HDR_VALID_OFF 2
|
|
#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF)
|
|
#define ITCT_HDR_MCR_OFF 5
|
|
#define ITCT_HDR_MCR_MSK (0xf << ITCT_HDR_MCR_OFF)
|
|
#define ITCT_HDR_VLN_OFF 9
|
|
#define ITCT_HDR_VLN_MSK (0xf << ITCT_HDR_VLN_OFF)
|
|
#define ITCT_HDR_SMP_TIMEOUT_OFF 16
|
|
#define ITCT_HDR_AWT_CONTINUE_OFF 25
|
|
#define ITCT_HDR_PORT_ID_OFF 28
|
|
#define ITCT_HDR_PORT_ID_MSK (0xf << ITCT_HDR_PORT_ID_OFF)
|
|
/* qw2 */
|
|
#define ITCT_HDR_INLT_OFF 0
|
|
#define ITCT_HDR_INLT_MSK (0xffffULL << ITCT_HDR_INLT_OFF)
|
|
#define ITCT_HDR_RTOLT_OFF 48
|
|
#define ITCT_HDR_RTOLT_MSK (0xffffULL << ITCT_HDR_RTOLT_OFF)
|
|
|
|
struct hisi_sas_complete_v3_hdr {
|
|
__le32 dw0;
|
|
__le32 dw1;
|
|
__le32 act;
|
|
__le32 dw3;
|
|
};
|
|
|
|
struct hisi_sas_err_record_v3 {
|
|
/* dw0 */
|
|
__le32 trans_tx_fail_type;
|
|
|
|
/* dw1 */
|
|
__le32 trans_rx_fail_type;
|
|
|
|
/* dw2 */
|
|
__le16 dma_tx_err_type;
|
|
__le16 sipc_rx_err_type;
|
|
|
|
/* dw3 */
|
|
__le32 dma_rx_err_type;
|
|
};
|
|
|
|
#define RX_DATA_LEN_UNDERFLOW_OFF 6
|
|
#define RX_DATA_LEN_UNDERFLOW_MSK (1 << RX_DATA_LEN_UNDERFLOW_OFF)
|
|
|
|
#define HISI_SAS_COMMAND_ENTRIES_V3_HW 4096
|
|
#define HISI_SAS_MSI_COUNT_V3_HW 32
|
|
|
|
#define DIR_NO_DATA 0
|
|
#define DIR_TO_INI 1
|
|
#define DIR_TO_DEVICE 2
|
|
#define DIR_RESERVED 3
|
|
|
|
#define FIS_CMD_IS_UNCONSTRAINED(fis) \
|
|
((fis.command == ATA_CMD_READ_LOG_EXT) || \
|
|
(fis.command == ATA_CMD_READ_LOG_DMA_EXT) || \
|
|
((fis.command == ATA_CMD_DEV_RESET) && \
|
|
((fis.control & ATA_SRST) != 0)))
|
|
|
|
static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + off;
|
|
|
|
return readl(regs);
|
|
}
|
|
|
|
static u32 hisi_sas_read32_relaxed(struct hisi_hba *hisi_hba, u32 off)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + off;
|
|
|
|
return readl_relaxed(regs);
|
|
}
|
|
|
|
static void hisi_sas_write32(struct hisi_hba *hisi_hba, u32 off, u32 val)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + off;
|
|
|
|
writel(val, regs);
|
|
}
|
|
|
|
static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba, int phy_no,
|
|
u32 off, u32 val)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
|
|
|
|
writel(val, regs);
|
|
}
|
|
|
|
static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
|
|
int phy_no, u32 off)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
|
|
|
|
return readl(regs);
|
|
}
|
|
|
|
#define hisi_sas_read32_poll_timeout(off, val, cond, delay_us, \
|
|
timeout_us) \
|
|
({ \
|
|
void __iomem *regs = hisi_hba->regs + off; \
|
|
readl_poll_timeout(regs, val, cond, delay_us, timeout_us); \
|
|
})
|
|
|
|
#define hisi_sas_read32_poll_timeout_atomic(off, val, cond, delay_us, \
|
|
timeout_us) \
|
|
({ \
|
|
void __iomem *regs = hisi_hba->regs + off; \
|
|
readl_poll_timeout_atomic(regs, val, cond, delay_us, timeout_us);\
|
|
})
|
|
|
|
static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct pci_dev *pdev = hisi_hba->pci_dev;
|
|
int i;
|
|
|
|
/* Global registers init */
|
|
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
|
|
(u32)((1ULL << hisi_hba->queue_count) - 1));
|
|
hisi_sas_write32(hisi_hba, CFG_MAX_TAG, 0xfff0400);
|
|
hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108);
|
|
hisi_sas_write32(hisi_hba, CFG_1US_TIMER_TRSH, 0xd);
|
|
hisi_sas_write32(hisi_hba, INT_COAL_EN, 0x1);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 0x1);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0xffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xfefefefe);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xfefefefe);
|
|
if (pdev->revision >= 0x21)
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xffff7fff);
|
|
else
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xfffe20ff);
|
|
hisi_sas_write32(hisi_hba, CHNL_PHYUPDOWN_INT_MSK, 0x0);
|
|
hisi_sas_write32(hisi_hba, CHNL_ENT_INT_MSK, 0x0);
|
|
hisi_sas_write32(hisi_hba, HGC_COM_INT_MSK, 0x0);
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0x0);
|
|
hisi_sas_write32(hisi_hba, AWQOS_AWCACHE_CFG, 0xf0f0);
|
|
hisi_sas_write32(hisi_hba, ARQOS_ARCACHE_CFG, 0xf0f0);
|
|
for (i = 0; i < hisi_hba->queue_count; i++)
|
|
hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK+0x4*i, 0);
|
|
|
|
hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[i];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
u32 prog_phy_link_rate = 0x800;
|
|
|
|
if (!sas_phy->phy || (sas_phy->phy->maximum_linkrate <
|
|
SAS_LINK_RATE_1_5_GBPS)) {
|
|
prog_phy_link_rate = 0x855;
|
|
} else {
|
|
enum sas_linkrate max = sas_phy->phy->maximum_linkrate;
|
|
|
|
prog_phy_link_rate =
|
|
hisi_sas_get_prog_phy_linkrate_mask(max) |
|
|
0x800;
|
|
}
|
|
hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE,
|
|
prog_phy_link_rate);
|
|
hisi_sas_phy_write32(hisi_hba, i, SAS_RX_TRAIN_TIMER, 0x13e80);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xffffffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
|
|
if (pdev->revision >= 0x21)
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK,
|
|
0xffffffff);
|
|
else
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK,
|
|
0xff87ffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0xffffbfe);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_DWS_RESET_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x1);
|
|
hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER, 0x7f7a120);
|
|
|
|
/* used for 12G negotiate */
|
|
hisi_sas_phy_write32(hisi_hba, i, COARSETUNE_TIME, 0x1e);
|
|
}
|
|
|
|
for (i = 0; i < hisi_hba->queue_count; i++) {
|
|
/* Delivery queue */
|
|
hisi_sas_write32(hisi_hba,
|
|
DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
|
|
upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
|
|
lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_Q_0_DEPTH + (i * 0x14),
|
|
HISI_SAS_QUEUE_SLOTS);
|
|
|
|
/* Completion queue */
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
|
|
upper_32_bits(hisi_hba->complete_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
|
|
lower_32_bits(hisi_hba->complete_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
|
|
HISI_SAS_QUEUE_SLOTS);
|
|
}
|
|
|
|
/* itct */
|
|
hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
|
|
lower_32_bits(hisi_hba->itct_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
|
|
upper_32_bits(hisi_hba->itct_dma));
|
|
|
|
/* iost */
|
|
hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
|
|
lower_32_bits(hisi_hba->iost_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
|
|
upper_32_bits(hisi_hba->iost_dma));
|
|
|
|
/* breakpoint */
|
|
hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_LO,
|
|
lower_32_bits(hisi_hba->breakpoint_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_HI,
|
|
upper_32_bits(hisi_hba->breakpoint_dma));
|
|
|
|
/* SATA broken msg */
|
|
hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_LO,
|
|
lower_32_bits(hisi_hba->sata_breakpoint_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_HI,
|
|
upper_32_bits(hisi_hba->sata_breakpoint_dma));
|
|
|
|
/* SATA initial fis */
|
|
hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_LO,
|
|
lower_32_bits(hisi_hba->initial_fis_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_HI,
|
|
upper_32_bits(hisi_hba->initial_fis_dma));
|
|
|
|
/* RAS registers init */
|
|
hisi_sas_write32(hisi_hba, SAS_RAS_INTR0_MASK, 0x0);
|
|
hisi_sas_write32(hisi_hba, SAS_RAS_INTR1_MASK, 0x0);
|
|
hisi_sas_write32(hisi_hba, SAS_RAS_INTR2_MASK, 0x0);
|
|
hisi_sas_write32(hisi_hba, CFG_SAS_RAS_INTR_MASK, 0x0);
|
|
|
|
/* LED registers init */
|
|
hisi_sas_write32(hisi_hba, SAS_CFG_DRIVE_VLD, 0x80000ff);
|
|
hisi_sas_write32(hisi_hba, SAS_GPIO_TX_0_1, 0x80808080);
|
|
hisi_sas_write32(hisi_hba, SAS_GPIO_TX_0_1 + 0x4, 0x80808080);
|
|
/* Configure blink generator rate A to 1Hz and B to 4Hz */
|
|
hisi_sas_write32(hisi_hba, SAS_GPIO_CFG_1, 0x121700);
|
|
hisi_sas_write32(hisi_hba, SAS_GPIO_CFG_0, 0x800000);
|
|
}
|
|
|
|
static void config_phy_opt_mode_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
|
|
cfg &= ~PHY_CFG_DC_OPT_MSK;
|
|
cfg |= 1 << PHY_CFG_DC_OPT_OFF;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
}
|
|
|
|
static void config_id_frame_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
struct sas_identify_frame identify_frame;
|
|
u32 *identify_buffer;
|
|
|
|
memset(&identify_frame, 0, sizeof(identify_frame));
|
|
identify_frame.dev_type = SAS_END_DEVICE;
|
|
identify_frame.frame_type = 0;
|
|
identify_frame._un1 = 1;
|
|
identify_frame.initiator_bits = SAS_PROTOCOL_ALL;
|
|
identify_frame.target_bits = SAS_PROTOCOL_NONE;
|
|
memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
|
|
memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
|
|
identify_frame.phy_id = phy_no;
|
|
identify_buffer = (u32 *)(&identify_frame);
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
|
|
__swab32(identify_buffer[0]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
|
|
__swab32(identify_buffer[1]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
|
|
__swab32(identify_buffer[2]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
|
|
__swab32(identify_buffer[3]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
|
|
__swab32(identify_buffer[4]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
|
|
__swab32(identify_buffer[5]));
|
|
}
|
|
|
|
static void setup_itct_v3_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_device *sas_dev)
|
|
{
|
|
struct domain_device *device = sas_dev->sas_device;
|
|
struct device *dev = hisi_hba->dev;
|
|
u64 qw0, device_id = sas_dev->device_id;
|
|
struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
|
|
struct domain_device *parent_dev = device->parent;
|
|
struct asd_sas_port *sas_port = device->port;
|
|
struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
|
|
|
|
memset(itct, 0, sizeof(*itct));
|
|
|
|
/* qw0 */
|
|
qw0 = 0;
|
|
switch (sas_dev->dev_type) {
|
|
case SAS_END_DEVICE:
|
|
case SAS_EDGE_EXPANDER_DEVICE:
|
|
case SAS_FANOUT_EXPANDER_DEVICE:
|
|
qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF;
|
|
break;
|
|
case SAS_SATA_DEV:
|
|
case SAS_SATA_PENDING:
|
|
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
|
|
qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF;
|
|
else
|
|
qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF;
|
|
break;
|
|
default:
|
|
dev_warn(dev, "setup itct: unsupported dev type (%d)\n",
|
|
sas_dev->dev_type);
|
|
}
|
|
|
|
qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
|
|
(device->linkrate << ITCT_HDR_MCR_OFF) |
|
|
(1 << ITCT_HDR_VLN_OFF) |
|
|
(0xfa << ITCT_HDR_SMP_TIMEOUT_OFF) |
|
|
(1 << ITCT_HDR_AWT_CONTINUE_OFF) |
|
|
(port->id << ITCT_HDR_PORT_ID_OFF));
|
|
itct->qw0 = cpu_to_le64(qw0);
|
|
|
|
/* qw1 */
|
|
memcpy(&itct->sas_addr, device->sas_addr, SAS_ADDR_SIZE);
|
|
itct->sas_addr = __swab64(itct->sas_addr);
|
|
|
|
/* qw2 */
|
|
if (!dev_is_sata(device))
|
|
itct->qw2 = cpu_to_le64((5000ULL << ITCT_HDR_INLT_OFF) |
|
|
(0x1ULL << ITCT_HDR_RTOLT_OFF));
|
|
}
|
|
|
|
static void clear_itct_v3_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_device *sas_dev)
|
|
{
|
|
DECLARE_COMPLETION_ONSTACK(completion);
|
|
u64 dev_id = sas_dev->device_id;
|
|
struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
|
|
u32 reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
|
|
|
|
sas_dev->completion = &completion;
|
|
|
|
/* clear the itct interrupt state */
|
|
if (ENT_INT_SRC3_ITC_INT_MSK & reg_val)
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
|
|
ENT_INT_SRC3_ITC_INT_MSK);
|
|
|
|
/* clear the itct table*/
|
|
reg_val = ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK);
|
|
hisi_sas_write32(hisi_hba, ITCT_CLR, reg_val);
|
|
|
|
wait_for_completion(sas_dev->completion);
|
|
memset(itct, 0, sizeof(struct hisi_sas_itct));
|
|
}
|
|
|
|
static void dereg_device_v3_hw(struct hisi_hba *hisi_hba,
|
|
struct domain_device *device)
|
|
{
|
|
struct hisi_sas_slot *slot, *slot2;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
u32 cfg_abt_set_query_iptt;
|
|
|
|
cfg_abt_set_query_iptt = hisi_sas_read32(hisi_hba,
|
|
CFG_ABT_SET_QUERY_IPTT);
|
|
list_for_each_entry_safe(slot, slot2, &sas_dev->list, entry) {
|
|
cfg_abt_set_query_iptt &= ~CFG_SET_ABORTED_IPTT_MSK;
|
|
cfg_abt_set_query_iptt |= (1 << CFG_SET_ABORTED_EN_OFF) |
|
|
(slot->idx << CFG_SET_ABORTED_IPTT_OFF);
|
|
hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT,
|
|
cfg_abt_set_query_iptt);
|
|
}
|
|
cfg_abt_set_query_iptt &= ~(1 << CFG_SET_ABORTED_EN_OFF);
|
|
hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT,
|
|
cfg_abt_set_query_iptt);
|
|
hisi_sas_write32(hisi_hba, CFG_ABT_SET_IPTT_DONE,
|
|
1 << CFG_ABT_SET_IPTT_DONE_OFF);
|
|
}
|
|
|
|
static int reset_hw_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int ret;
|
|
u32 val;
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0);
|
|
|
|
/* Disable all of the PHYs */
|
|
hisi_sas_stop_phys(hisi_hba);
|
|
udelay(50);
|
|
|
|
/* Ensure axi bus idle */
|
|
ret = hisi_sas_read32_poll_timeout(AXI_CFG, val, !val,
|
|
20000, 1000000);
|
|
if (ret) {
|
|
dev_err(dev, "axi bus is not idle, ret = %d!\n", ret);
|
|
return -EIO;
|
|
}
|
|
|
|
if (ACPI_HANDLE(dev)) {
|
|
acpi_status s;
|
|
|
|
s = acpi_evaluate_object(ACPI_HANDLE(dev), "_RST", NULL, NULL);
|
|
if (ACPI_FAILURE(s)) {
|
|
dev_err(dev, "Reset failed\n");
|
|
return -EIO;
|
|
}
|
|
} else {
|
|
dev_err(dev, "no reset method!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int rc;
|
|
|
|
rc = reset_hw_v3_hw(hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
|
|
return rc;
|
|
}
|
|
|
|
msleep(100);
|
|
init_reg_v3_hw(hisi_hba);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void enable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
|
|
cfg |= PHY_CFG_ENA_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
}
|
|
|
|
static void disable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
|
|
cfg &= ~PHY_CFG_ENA_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
}
|
|
|
|
static void start_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
config_id_frame_v3_hw(hisi_hba, phy_no);
|
|
config_phy_opt_mode_v3_hw(hisi_hba, phy_no);
|
|
enable_phy_v3_hw(hisi_hba, phy_no);
|
|
}
|
|
|
|
static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
u32 txid_auto;
|
|
|
|
disable_phy_v3_hw(hisi_hba, phy_no);
|
|
if (phy->identify.device_type == SAS_END_DEVICE) {
|
|
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
|
|
txid_auto | TX_HARDRST_MSK);
|
|
}
|
|
msleep(100);
|
|
start_phy_v3_hw(hisi_hba, phy_no);
|
|
}
|
|
|
|
static enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
|
|
{
|
|
return SAS_LINK_RATE_12_0_GBPS;
|
|
}
|
|
|
|
static void phys_init_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[i];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
|
|
if (!sas_phy->phy->enabled)
|
|
continue;
|
|
|
|
start_phy_v3_hw(hisi_hba, i);
|
|
}
|
|
}
|
|
|
|
static void sl_notify_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 sl_control;
|
|
|
|
sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
|
|
sl_control |= SL_CONTROL_NOTIFY_EN_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
|
|
msleep(1);
|
|
sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
|
|
sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
|
|
}
|
|
|
|
static int get_wideport_bitmap_v3_hw(struct hisi_hba *hisi_hba, int port_id)
|
|
{
|
|
int i, bitmap = 0;
|
|
u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
|
|
u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++)
|
|
if (phy_state & BIT(i))
|
|
if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
|
|
bitmap |= BIT(i);
|
|
|
|
return bitmap;
|
|
}
|
|
|
|
/**
|
|
* The callpath to this function and upto writing the write
|
|
* queue pointer should be safe from interruption.
|
|
*/
|
|
static int
|
|
get_free_slot_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_dq *dq)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int queue = dq->id;
|
|
u32 r, w;
|
|
|
|
w = dq->wr_point;
|
|
r = hisi_sas_read32_relaxed(hisi_hba,
|
|
DLVRY_Q_0_RD_PTR + (queue * 0x14));
|
|
if (r == (w+1) % HISI_SAS_QUEUE_SLOTS) {
|
|
dev_warn(dev, "full queue=%d r=%d w=%d\n",
|
|
queue, r, w);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
dq->wr_point = (dq->wr_point + 1) % HISI_SAS_QUEUE_SLOTS;
|
|
|
|
return w;
|
|
}
|
|
|
|
static void start_delivery_v3_hw(struct hisi_sas_dq *dq)
|
|
{
|
|
struct hisi_hba *hisi_hba = dq->hisi_hba;
|
|
struct hisi_sas_slot *s, *s1;
|
|
struct list_head *dq_list;
|
|
int dlvry_queue = dq->id;
|
|
int wp, count = 0;
|
|
|
|
dq_list = &dq->list;
|
|
list_for_each_entry_safe(s, s1, &dq->list, delivery) {
|
|
if (!s->ready)
|
|
break;
|
|
count++;
|
|
wp = (s->dlvry_queue_slot + 1) % HISI_SAS_QUEUE_SLOTS;
|
|
list_del(&s->delivery);
|
|
}
|
|
|
|
if (!count)
|
|
return;
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_Q_0_WR_PTR + (dlvry_queue * 0x14), wp);
|
|
}
|
|
|
|
static void prep_prd_sge_v3_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot,
|
|
struct hisi_sas_cmd_hdr *hdr,
|
|
struct scatterlist *scatter,
|
|
int n_elem)
|
|
{
|
|
struct hisi_sas_sge_page *sge_page = hisi_sas_sge_addr_mem(slot);
|
|
struct scatterlist *sg;
|
|
int i;
|
|
|
|
for_each_sg(scatter, sg, n_elem, i) {
|
|
struct hisi_sas_sge *entry = &sge_page->sge[i];
|
|
|
|
entry->addr = cpu_to_le64(sg_dma_address(sg));
|
|
entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
|
|
entry->data_len = cpu_to_le32(sg_dma_len(sg));
|
|
entry->data_off = 0;
|
|
}
|
|
|
|
hdr->prd_table_addr = cpu_to_le64(hisi_sas_sge_addr_dma(slot));
|
|
|
|
hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
|
|
}
|
|
|
|
static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct domain_device *device = task->dev;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
struct hisi_sas_port *port = slot->port;
|
|
struct sas_ssp_task *ssp_task = &task->ssp_task;
|
|
struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
|
|
struct hisi_sas_tmf_task *tmf = slot->tmf;
|
|
int has_data = 0, priority = !!tmf;
|
|
u8 *buf_cmd;
|
|
u32 dw1 = 0, dw2 = 0;
|
|
|
|
hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
|
|
(2 << CMD_HDR_TLR_CTRL_OFF) |
|
|
(port->id << CMD_HDR_PORT_OFF) |
|
|
(priority << CMD_HDR_PRIORITY_OFF) |
|
|
(1 << CMD_HDR_CMD_OFF)); /* ssp */
|
|
|
|
dw1 = 1 << CMD_HDR_VDTL_OFF;
|
|
if (tmf) {
|
|
dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF;
|
|
dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF;
|
|
} else {
|
|
dw1 |= 1 << CMD_HDR_FRAME_TYPE_OFF;
|
|
switch (scsi_cmnd->sc_data_direction) {
|
|
case DMA_TO_DEVICE:
|
|
has_data = 1;
|
|
dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF;
|
|
break;
|
|
case DMA_FROM_DEVICE:
|
|
has_data = 1;
|
|
dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF;
|
|
break;
|
|
default:
|
|
dw1 &= ~CMD_HDR_DIR_MSK;
|
|
}
|
|
}
|
|
|
|
/* map itct entry */
|
|
dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
|
|
hdr->dw1 = cpu_to_le32(dw1);
|
|
|
|
dw2 = (((sizeof(struct ssp_command_iu) + sizeof(struct ssp_frame_hdr)
|
|
+ 3) / 4) << CMD_HDR_CFL_OFF) |
|
|
((HISI_SAS_MAX_SSP_RESP_SZ / 4) << CMD_HDR_MRFL_OFF) |
|
|
(2 << CMD_HDR_SG_MOD_OFF);
|
|
hdr->dw2 = cpu_to_le32(dw2);
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx);
|
|
|
|
if (has_data)
|
|
prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter,
|
|
slot->n_elem);
|
|
|
|
hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
|
|
hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
|
|
hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
|
|
|
|
buf_cmd = hisi_sas_cmd_hdr_addr_mem(slot) +
|
|
sizeof(struct ssp_frame_hdr);
|
|
|
|
memcpy(buf_cmd, &task->ssp_task.LUN, 8);
|
|
if (!tmf) {
|
|
buf_cmd[9] = ssp_task->task_attr | (ssp_task->task_prio << 3);
|
|
memcpy(buf_cmd + 12, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
|
|
} else {
|
|
buf_cmd[10] = tmf->tmf;
|
|
switch (tmf->tmf) {
|
|
case TMF_ABORT_TASK:
|
|
case TMF_QUERY_TASK:
|
|
buf_cmd[12] =
|
|
(tmf->tag_of_task_to_be_managed >> 8) & 0xff;
|
|
buf_cmd[13] =
|
|
tmf->tag_of_task_to_be_managed & 0xff;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void prep_smp_v3_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct domain_device *device = task->dev;
|
|
struct hisi_sas_port *port = slot->port;
|
|
struct scatterlist *sg_req;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
dma_addr_t req_dma_addr;
|
|
unsigned int req_len;
|
|
|
|
/* req */
|
|
sg_req = &task->smp_task.smp_req;
|
|
req_len = sg_dma_len(sg_req);
|
|
req_dma_addr = sg_dma_address(sg_req);
|
|
|
|
/* create header */
|
|
/* dw0 */
|
|
hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) |
|
|
(1 << CMD_HDR_PRIORITY_OFF) | /* high pri */
|
|
(2 << CMD_HDR_CMD_OFF)); /* smp */
|
|
|
|
/* map itct entry */
|
|
hdr->dw1 = cpu_to_le32((sas_dev->device_id << CMD_HDR_DEV_ID_OFF) |
|
|
(1 << CMD_HDR_FRAME_TYPE_OFF) |
|
|
(DIR_NO_DATA << CMD_HDR_DIR_OFF));
|
|
|
|
/* dw2 */
|
|
hdr->dw2 = cpu_to_le32((((req_len - 4) / 4) << CMD_HDR_CFL_OFF) |
|
|
(HISI_SAS_MAX_SMP_RESP_SZ / 4 <<
|
|
CMD_HDR_MRFL_OFF));
|
|
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
|
|
|
|
hdr->cmd_table_addr = cpu_to_le64(req_dma_addr);
|
|
hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
|
|
|
|
}
|
|
|
|
static void prep_ata_v3_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct domain_device *device = task->dev;
|
|
struct domain_device *parent_dev = device->parent;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct asd_sas_port *sas_port = device->port;
|
|
struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
|
|
u8 *buf_cmd;
|
|
int has_data = 0, hdr_tag = 0;
|
|
u32 dw1 = 0, dw2 = 0;
|
|
|
|
hdr->dw0 = cpu_to_le32(port->id << CMD_HDR_PORT_OFF);
|
|
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
|
|
hdr->dw0 |= cpu_to_le32(3 << CMD_HDR_CMD_OFF);
|
|
else
|
|
hdr->dw0 |= cpu_to_le32(4 << CMD_HDR_CMD_OFF);
|
|
|
|
switch (task->data_dir) {
|
|
case DMA_TO_DEVICE:
|
|
has_data = 1;
|
|
dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF;
|
|
break;
|
|
case DMA_FROM_DEVICE:
|
|
has_data = 1;
|
|
dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF;
|
|
break;
|
|
default:
|
|
dw1 &= ~CMD_HDR_DIR_MSK;
|
|
}
|
|
|
|
if ((task->ata_task.fis.command == ATA_CMD_DEV_RESET) &&
|
|
(task->ata_task.fis.control & ATA_SRST))
|
|
dw1 |= 1 << CMD_HDR_RESET_OFF;
|
|
|
|
dw1 |= (hisi_sas_get_ata_protocol(
|
|
&task->ata_task.fis, task->data_dir))
|
|
<< CMD_HDR_FRAME_TYPE_OFF;
|
|
dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
|
|
|
|
if (FIS_CMD_IS_UNCONSTRAINED(task->ata_task.fis))
|
|
dw1 |= 1 << CMD_HDR_UNCON_CMD_OFF;
|
|
|
|
hdr->dw1 = cpu_to_le32(dw1);
|
|
|
|
/* dw2 */
|
|
if (task->ata_task.use_ncq && hisi_sas_get_ncq_tag(task, &hdr_tag)) {
|
|
task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
|
|
dw2 |= hdr_tag << CMD_HDR_NCQ_TAG_OFF;
|
|
}
|
|
|
|
dw2 |= (HISI_SAS_MAX_STP_RESP_SZ / 4) << CMD_HDR_CFL_OFF |
|
|
2 << CMD_HDR_SG_MOD_OFF;
|
|
hdr->dw2 = cpu_to_le32(dw2);
|
|
|
|
/* dw3 */
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx);
|
|
|
|
if (has_data)
|
|
prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter,
|
|
slot->n_elem);
|
|
|
|
hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
|
|
hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
|
|
hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
|
|
|
|
buf_cmd = hisi_sas_cmd_hdr_addr_mem(slot);
|
|
|
|
if (likely(!task->ata_task.device_control_reg_update))
|
|
task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
|
|
/* fill in command FIS */
|
|
memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
|
|
}
|
|
|
|
static void prep_abort_v3_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot,
|
|
int device_id, int abort_flag, int tag_to_abort)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct domain_device *dev = task->dev;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct hisi_sas_port *port = slot->port;
|
|
|
|
/* dw0 */
|
|
hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/
|
|
(port->id << CMD_HDR_PORT_OFF) |
|
|
(dev_is_sata(dev)
|
|
<< CMD_HDR_ABORT_DEVICE_TYPE_OFF) |
|
|
(abort_flag
|
|
<< CMD_HDR_ABORT_FLAG_OFF));
|
|
|
|
/* dw1 */
|
|
hdr->dw1 = cpu_to_le32(device_id
|
|
<< CMD_HDR_DEV_ID_OFF);
|
|
|
|
/* dw7 */
|
|
hdr->dw7 = cpu_to_le32(tag_to_abort << CMD_HDR_ABORT_IPTT_OFF);
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx);
|
|
|
|
}
|
|
|
|
static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
|
|
{
|
|
int i, res;
|
|
u32 context, port_id, link_rate;
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
struct device *dev = hisi_hba->dev;
|
|
unsigned long flags;
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
|
|
|
|
port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
|
|
port_id = (port_id >> (4 * phy_no)) & 0xf;
|
|
link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
|
|
link_rate = (link_rate >> (phy_no * 4)) & 0xf;
|
|
|
|
if (port_id == 0xf) {
|
|
dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
|
|
res = IRQ_NONE;
|
|
goto end;
|
|
}
|
|
sas_phy->linkrate = link_rate;
|
|
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
|
|
|
|
/* Check for SATA dev */
|
|
context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
|
|
if (context & (1 << phy_no)) {
|
|
struct hisi_sas_initial_fis *initial_fis;
|
|
struct dev_to_host_fis *fis;
|
|
u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
|
|
|
|
dev_info(dev, "phyup: phy%d link_rate=%d(sata)\n", phy_no, link_rate);
|
|
initial_fis = &hisi_hba->initial_fis[phy_no];
|
|
fis = &initial_fis->fis;
|
|
sas_phy->oob_mode = SATA_OOB_MODE;
|
|
attached_sas_addr[0] = 0x50;
|
|
attached_sas_addr[7] = phy_no;
|
|
memcpy(sas_phy->attached_sas_addr,
|
|
attached_sas_addr,
|
|
SAS_ADDR_SIZE);
|
|
memcpy(sas_phy->frame_rcvd, fis,
|
|
sizeof(struct dev_to_host_fis));
|
|
phy->phy_type |= PORT_TYPE_SATA;
|
|
phy->identify.device_type = SAS_SATA_DEV;
|
|
phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
|
|
phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
|
|
} else {
|
|
u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
|
|
struct sas_identify_frame *id =
|
|
(struct sas_identify_frame *)frame_rcvd;
|
|
|
|
dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate);
|
|
for (i = 0; i < 6; i++) {
|
|
u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
RX_IDAF_DWORD0 + (i * 4));
|
|
frame_rcvd[i] = __swab32(idaf);
|
|
}
|
|
sas_phy->oob_mode = SAS_OOB_MODE;
|
|
memcpy(sas_phy->attached_sas_addr,
|
|
&id->sas_addr,
|
|
SAS_ADDR_SIZE);
|
|
phy->phy_type |= PORT_TYPE_SAS;
|
|
phy->identify.device_type = id->dev_type;
|
|
phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
|
|
if (phy->identify.device_type == SAS_END_DEVICE)
|
|
phy->identify.target_port_protocols =
|
|
SAS_PROTOCOL_SSP;
|
|
else if (phy->identify.device_type != SAS_PHY_UNUSED)
|
|
phy->identify.target_port_protocols =
|
|
SAS_PROTOCOL_SMP;
|
|
}
|
|
|
|
phy->port_id = port_id;
|
|
phy->phy_attached = 1;
|
|
hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
|
|
res = IRQ_HANDLED;
|
|
spin_lock_irqsave(&phy->lock, flags);
|
|
if (phy->reset_completion) {
|
|
phy->in_reset = 0;
|
|
complete(phy->reset_completion);
|
|
}
|
|
spin_unlock_irqrestore(&phy->lock, flags);
|
|
end:
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
|
|
CHL_INT0_SL_PHY_ENABLE_MSK);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 0);
|
|
|
|
return res;
|
|
}
|
|
|
|
static irqreturn_t phy_down_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
|
|
{
|
|
u32 phy_state, sl_ctrl, txid_auto;
|
|
struct device *dev = hisi_hba->dev;
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 1);
|
|
|
|
phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
dev_info(dev, "phydown: phy%d phy_state=0x%x\n", phy_no, phy_state);
|
|
hisi_sas_phy_down(hisi_hba, phy_no, (phy_state & 1 << phy_no) ? 1 : 0);
|
|
|
|
sl_ctrl = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL,
|
|
sl_ctrl&(~SL_CTA_MSK));
|
|
|
|
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
|
|
txid_auto | CT3_MSK);
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
|
|
{
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
struct sas_ha_struct *sas_ha = &hisi_hba->sha;
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
|
|
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
|
|
CHL_INT0_SL_RX_BCST_ACK_MSK);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t int_phy_up_down_bcast_v3_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_hba *hisi_hba = p;
|
|
u32 irq_msk;
|
|
int phy_no = 0;
|
|
irqreturn_t res = IRQ_NONE;
|
|
|
|
irq_msk = hisi_sas_read32(hisi_hba, CHNL_INT_STATUS)
|
|
& 0x11111111;
|
|
while (irq_msk) {
|
|
if (irq_msk & 1) {
|
|
u32 irq_value = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT0);
|
|
u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
int rdy = phy_state & (1 << phy_no);
|
|
|
|
if (rdy) {
|
|
if (irq_value & CHL_INT0_SL_PHY_ENABLE_MSK)
|
|
/* phy up */
|
|
if (phy_up_v3_hw(phy_no, hisi_hba)
|
|
== IRQ_HANDLED)
|
|
res = IRQ_HANDLED;
|
|
if (irq_value & CHL_INT0_SL_RX_BCST_ACK_MSK)
|
|
/* phy bcast */
|
|
if (phy_bcast_v3_hw(phy_no, hisi_hba)
|
|
== IRQ_HANDLED)
|
|
res = IRQ_HANDLED;
|
|
} else {
|
|
if (irq_value & CHL_INT0_NOT_RDY_MSK)
|
|
/* phy down */
|
|
if (phy_down_v3_hw(phy_no, hisi_hba)
|
|
== IRQ_HANDLED)
|
|
res = IRQ_HANDLED;
|
|
}
|
|
}
|
|
irq_msk >>= 4;
|
|
phy_no++;
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static const struct hisi_sas_hw_error port_axi_error[] = {
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF),
|
|
.msg = "dma_tx_axi_wr_err",
|
|
},
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF),
|
|
.msg = "dma_tx_axi_rd_err",
|
|
},
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF),
|
|
.msg = "dma_rx_axi_wr_err",
|
|
},
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF),
|
|
.msg = "dma_rx_axi_rd_err",
|
|
},
|
|
};
|
|
|
|
static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_hba *hisi_hba = p;
|
|
struct device *dev = hisi_hba->dev;
|
|
struct pci_dev *pci_dev = hisi_hba->pci_dev;
|
|
u32 irq_msk;
|
|
int phy_no = 0;
|
|
|
|
irq_msk = hisi_sas_read32(hisi_hba, CHNL_INT_STATUS)
|
|
& 0xeeeeeeee;
|
|
|
|
while (irq_msk) {
|
|
u32 irq_value0 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT0);
|
|
u32 irq_value1 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT1);
|
|
u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT2);
|
|
u32 irq_msk1 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT1_MSK);
|
|
u32 irq_msk2 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT2_MSK);
|
|
|
|
irq_value1 &= ~irq_msk1;
|
|
irq_value2 &= ~irq_msk2;
|
|
|
|
if ((irq_msk & (4 << (phy_no * 4))) &&
|
|
irq_value1) {
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(port_axi_error); i++) {
|
|
const struct hisi_sas_hw_error *error =
|
|
&port_axi_error[i];
|
|
|
|
if (!(irq_value1 & error->irq_msk))
|
|
continue;
|
|
|
|
dev_err(dev, "%s error (phy%d 0x%x) found!\n",
|
|
error->msg, phy_no, irq_value1);
|
|
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
|
|
}
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no,
|
|
CHL_INT1, irq_value1);
|
|
}
|
|
|
|
if (irq_msk & (8 << (phy_no * 4)) && irq_value2) {
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
|
|
if (irq_value2 & BIT(CHL_INT2_SL_IDAF_TOUT_CONF_OFF)) {
|
|
dev_warn(dev, "phy%d identify timeout\n",
|
|
phy_no);
|
|
hisi_sas_notify_phy_event(phy,
|
|
HISI_PHYE_LINK_RESET);
|
|
|
|
}
|
|
|
|
if (irq_value2 & BIT(CHL_INT2_STP_LINK_TIMEOUT_OFF)) {
|
|
u32 reg_value = hisi_sas_phy_read32(hisi_hba,
|
|
phy_no, STP_LINK_TIMEOUT_STATE);
|
|
|
|
dev_warn(dev, "phy%d stp link timeout (0x%x)\n",
|
|
phy_no, reg_value);
|
|
if (reg_value & BIT(4))
|
|
hisi_sas_notify_phy_event(phy,
|
|
HISI_PHYE_LINK_RESET);
|
|
}
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no,
|
|
CHL_INT2, irq_value2);
|
|
|
|
if ((irq_value2 & BIT(CHL_INT2_RX_INVLD_DW_OFF)) &&
|
|
(pci_dev->revision == 0x20)) {
|
|
u32 reg_value;
|
|
int rc;
|
|
|
|
rc = hisi_sas_read32_poll_timeout_atomic(
|
|
HILINK_ERR_DFX, reg_value,
|
|
!((reg_value >> 8) & BIT(phy_no)),
|
|
1000, 10000);
|
|
if (rc) {
|
|
disable_phy_v3_hw(hisi_hba, phy_no);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no,
|
|
CHL_INT2,
|
|
BIT(CHL_INT2_RX_INVLD_DW_OFF));
|
|
hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
ERR_CNT_INVLD_DW);
|
|
mdelay(1);
|
|
enable_phy_v3_hw(hisi_hba, phy_no);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (irq_msk & (2 << (phy_no * 4)) && irq_value0) {
|
|
hisi_sas_phy_write32(hisi_hba, phy_no,
|
|
CHL_INT0, irq_value0
|
|
& (~CHL_INT0_SL_RX_BCST_ACK_MSK)
|
|
& (~CHL_INT0_SL_PHY_ENABLE_MSK)
|
|
& (~CHL_INT0_NOT_RDY_MSK));
|
|
}
|
|
irq_msk &= ~(0xe << (phy_no * 4));
|
|
phy_no++;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct hisi_sas_hw_error axi_error[] = {
|
|
{ .msk = BIT(0), .msg = "IOST_AXI_W_ERR" },
|
|
{ .msk = BIT(1), .msg = "IOST_AXI_R_ERR" },
|
|
{ .msk = BIT(2), .msg = "ITCT_AXI_W_ERR" },
|
|
{ .msk = BIT(3), .msg = "ITCT_AXI_R_ERR" },
|
|
{ .msk = BIT(4), .msg = "SATA_AXI_W_ERR" },
|
|
{ .msk = BIT(5), .msg = "SATA_AXI_R_ERR" },
|
|
{ .msk = BIT(6), .msg = "DQE_AXI_R_ERR" },
|
|
{ .msk = BIT(7), .msg = "CQE_AXI_W_ERR" },
|
|
{},
|
|
};
|
|
|
|
static const struct hisi_sas_hw_error fifo_error[] = {
|
|
{ .msk = BIT(8), .msg = "CQE_WINFO_FIFO" },
|
|
{ .msk = BIT(9), .msg = "CQE_MSG_FIFIO" },
|
|
{ .msk = BIT(10), .msg = "GETDQE_FIFO" },
|
|
{ .msk = BIT(11), .msg = "CMDP_FIFO" },
|
|
{ .msk = BIT(12), .msg = "AWTCTRL_FIFO" },
|
|
{},
|
|
};
|
|
|
|
static const struct hisi_sas_hw_error fatal_axi_error[] = {
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_WP_DEPTH_OFF),
|
|
.msg = "write pointer and depth",
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF),
|
|
.msg = "iptt no match slot",
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_RP_DEPTH_OFF),
|
|
.msg = "read pointer and depth",
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_AXI_OFF),
|
|
.reg = HGC_AXI_FIFO_ERR_INFO,
|
|
.sub = axi_error,
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_FIFO_OFF),
|
|
.reg = HGC_AXI_FIFO_ERR_INFO,
|
|
.sub = fifo_error,
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_LM_OFF),
|
|
.msg = "LM add/fetch list",
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_ABT_OFF),
|
|
.msg = "SAS_HGC_ABT fetch LM list",
|
|
},
|
|
};
|
|
|
|
static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p)
|
|
{
|
|
u32 irq_value, irq_msk;
|
|
struct hisi_hba *hisi_hba = p;
|
|
struct device *dev = hisi_hba->dev;
|
|
int i;
|
|
|
|
irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk | 0x1df00);
|
|
|
|
irq_value = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
|
|
irq_value &= ~irq_msk;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(fatal_axi_error); i++) {
|
|
const struct hisi_sas_hw_error *error = &fatal_axi_error[i];
|
|
|
|
if (!(irq_value & error->irq_msk))
|
|
continue;
|
|
|
|
if (error->sub) {
|
|
const struct hisi_sas_hw_error *sub = error->sub;
|
|
u32 err_value = hisi_sas_read32(hisi_hba, error->reg);
|
|
|
|
for (; sub->msk || sub->msg; sub++) {
|
|
if (!(err_value & sub->msk))
|
|
continue;
|
|
|
|
dev_err(dev, "%s error (0x%x) found!\n",
|
|
sub->msg, irq_value);
|
|
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
|
|
}
|
|
} else {
|
|
dev_err(dev, "%s error (0x%x) found!\n",
|
|
error->msg, irq_value);
|
|
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
|
|
}
|
|
}
|
|
|
|
if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) {
|
|
u32 reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
|
|
u32 dev_id = reg_val & ITCT_DEV_MSK;
|
|
struct hisi_sas_device *sas_dev =
|
|
&hisi_hba->devices[dev_id];
|
|
|
|
hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
|
|
dev_dbg(dev, "clear ITCT ok\n");
|
|
complete(sas_dev->completion);
|
|
}
|
|
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC3, irq_value & 0x1df00);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void
|
|
slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct task_status_struct *ts = &task->task_status;
|
|
struct hisi_sas_complete_v3_hdr *complete_queue =
|
|
hisi_hba->complete_hdr[slot->cmplt_queue];
|
|
struct hisi_sas_complete_v3_hdr *complete_hdr =
|
|
&complete_queue[slot->cmplt_queue_slot];
|
|
struct hisi_sas_err_record_v3 *record =
|
|
hisi_sas_status_buf_addr_mem(slot);
|
|
u32 dma_rx_err_type = record->dma_rx_err_type;
|
|
u32 trans_tx_fail_type = record->trans_tx_fail_type;
|
|
|
|
switch (task->task_proto) {
|
|
case SAS_PROTOCOL_SSP:
|
|
if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
|
|
ts->residual = trans_tx_fail_type;
|
|
ts->stat = SAS_DATA_UNDERRUN;
|
|
} else if (complete_hdr->dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
|
|
ts->stat = SAS_QUEUE_FULL;
|
|
slot->abort = 1;
|
|
} else {
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
|
|
}
|
|
break;
|
|
case SAS_PROTOCOL_SATA:
|
|
case SAS_PROTOCOL_STP:
|
|
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
|
|
if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
|
|
ts->residual = trans_tx_fail_type;
|
|
ts->stat = SAS_DATA_UNDERRUN;
|
|
} else if (complete_hdr->dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
|
|
ts->stat = SAS_PHY_DOWN;
|
|
slot->abort = 1;
|
|
} else {
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
|
|
}
|
|
hisi_sas_sata_done(task, slot);
|
|
break;
|
|
case SAS_PROTOCOL_SMP:
|
|
ts->stat = SAM_STAT_CHECK_CONDITION;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_device *sas_dev;
|
|
struct device *dev = hisi_hba->dev;
|
|
struct task_status_struct *ts;
|
|
struct domain_device *device;
|
|
struct sas_ha_struct *ha;
|
|
enum exec_status sts;
|
|
struct hisi_sas_complete_v3_hdr *complete_queue =
|
|
hisi_hba->complete_hdr[slot->cmplt_queue];
|
|
struct hisi_sas_complete_v3_hdr *complete_hdr =
|
|
&complete_queue[slot->cmplt_queue_slot];
|
|
unsigned long flags;
|
|
bool is_internal = slot->is_internal;
|
|
|
|
if (unlikely(!task || !task->lldd_task || !task->dev))
|
|
return -EINVAL;
|
|
|
|
ts = &task->task_status;
|
|
device = task->dev;
|
|
ha = device->port->ha;
|
|
sas_dev = device->lldd_dev;
|
|
|
|
spin_lock_irqsave(&task->task_state_lock, flags);
|
|
task->task_state_flags &=
|
|
~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
|
|
spin_unlock_irqrestore(&task->task_state_lock, flags);
|
|
|
|
memset(ts, 0, sizeof(*ts));
|
|
ts->resp = SAS_TASK_COMPLETE;
|
|
|
|
if (unlikely(!sas_dev)) {
|
|
dev_dbg(dev, "slot complete: port has not device\n");
|
|
ts->stat = SAS_PHY_DOWN;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Use SAS+TMF status codes
|
|
*/
|
|
switch ((complete_hdr->dw0 & CMPLT_HDR_ABORT_STAT_MSK)
|
|
>> CMPLT_HDR_ABORT_STAT_OFF) {
|
|
case STAT_IO_ABORTED:
|
|
/* this IO has been aborted by abort command */
|
|
ts->stat = SAS_ABORTED_TASK;
|
|
goto out;
|
|
case STAT_IO_COMPLETE:
|
|
/* internal abort command complete */
|
|
ts->stat = TMF_RESP_FUNC_SUCC;
|
|
goto out;
|
|
case STAT_IO_NO_DEVICE:
|
|
ts->stat = TMF_RESP_FUNC_COMPLETE;
|
|
goto out;
|
|
case STAT_IO_NOT_VALID:
|
|
/*
|
|
* abort single IO, the controller can't find the IO
|
|
*/
|
|
ts->stat = TMF_RESP_FUNC_FAILED;
|
|
goto out;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* check for erroneous completion */
|
|
if ((complete_hdr->dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) {
|
|
u32 *error_info = hisi_sas_status_buf_addr_mem(slot);
|
|
|
|
slot_err_v3_hw(hisi_hba, task, slot);
|
|
if (ts->stat != SAS_DATA_UNDERRUN)
|
|
dev_info(dev, "erroneous completion iptt=%d task=%p dev id=%d "
|
|
"CQ hdr: 0x%x 0x%x 0x%x 0x%x "
|
|
"Error info: 0x%x 0x%x 0x%x 0x%x\n",
|
|
slot->idx, task, sas_dev->device_id,
|
|
complete_hdr->dw0, complete_hdr->dw1,
|
|
complete_hdr->act, complete_hdr->dw3,
|
|
error_info[0], error_info[1],
|
|
error_info[2], error_info[3]);
|
|
if (unlikely(slot->abort))
|
|
return ts->stat;
|
|
goto out;
|
|
}
|
|
|
|
switch (task->task_proto) {
|
|
case SAS_PROTOCOL_SSP: {
|
|
struct ssp_response_iu *iu =
|
|
hisi_sas_status_buf_addr_mem(slot) +
|
|
sizeof(struct hisi_sas_err_record);
|
|
|
|
sas_ssp_task_response(dev, task, iu);
|
|
break;
|
|
}
|
|
case SAS_PROTOCOL_SMP: {
|
|
struct scatterlist *sg_resp = &task->smp_task.smp_resp;
|
|
void *to;
|
|
|
|
ts->stat = SAM_STAT_GOOD;
|
|
to = kmap_atomic(sg_page(sg_resp));
|
|
|
|
dma_unmap_sg(dev, &task->smp_task.smp_resp, 1,
|
|
DMA_FROM_DEVICE);
|
|
dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
|
|
DMA_TO_DEVICE);
|
|
memcpy(to + sg_resp->offset,
|
|
hisi_sas_status_buf_addr_mem(slot) +
|
|
sizeof(struct hisi_sas_err_record),
|
|
sg_dma_len(sg_resp));
|
|
kunmap_atomic(to);
|
|
break;
|
|
}
|
|
case SAS_PROTOCOL_SATA:
|
|
case SAS_PROTOCOL_STP:
|
|
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
|
|
ts->stat = SAM_STAT_GOOD;
|
|
hisi_sas_sata_done(task, slot);
|
|
break;
|
|
default:
|
|
ts->stat = SAM_STAT_CHECK_CONDITION;
|
|
break;
|
|
}
|
|
|
|
if (!slot->port->port_attached) {
|
|
dev_warn(dev, "slot complete: port %d has removed\n",
|
|
slot->port->sas_port.id);
|
|
ts->stat = SAS_PHY_DOWN;
|
|
}
|
|
|
|
out:
|
|
hisi_sas_slot_task_free(hisi_hba, task, slot);
|
|
sts = ts->stat;
|
|
spin_lock_irqsave(&task->task_state_lock, flags);
|
|
if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
|
|
spin_unlock_irqrestore(&task->task_state_lock, flags);
|
|
dev_info(dev, "slot complete: task(%p) aborted\n", task);
|
|
return SAS_ABORTED_TASK;
|
|
}
|
|
task->task_state_flags |= SAS_TASK_STATE_DONE;
|
|
spin_unlock_irqrestore(&task->task_state_lock, flags);
|
|
|
|
if (!is_internal && (task->task_proto != SAS_PROTOCOL_SMP)) {
|
|
spin_lock_irqsave(&device->done_lock, flags);
|
|
if (test_bit(SAS_HA_FROZEN, &ha->state)) {
|
|
spin_unlock_irqrestore(&device->done_lock, flags);
|
|
dev_info(dev, "slot complete: task(%p) ignored\n ",
|
|
task);
|
|
return sts;
|
|
}
|
|
spin_unlock_irqrestore(&device->done_lock, flags);
|
|
}
|
|
|
|
if (task->task_done)
|
|
task->task_done(task);
|
|
|
|
return sts;
|
|
}
|
|
|
|
static void cq_tasklet_v3_hw(unsigned long val)
|
|
{
|
|
struct hisi_sas_cq *cq = (struct hisi_sas_cq *)val;
|
|
struct hisi_hba *hisi_hba = cq->hisi_hba;
|
|
struct hisi_sas_slot *slot;
|
|
struct hisi_sas_complete_v3_hdr *complete_queue;
|
|
u32 rd_point = cq->rd_point, wr_point;
|
|
int queue = cq->id;
|
|
|
|
complete_queue = hisi_hba->complete_hdr[queue];
|
|
|
|
wr_point = hisi_sas_read32(hisi_hba, COMPL_Q_0_WR_PTR +
|
|
(0x14 * queue));
|
|
|
|
while (rd_point != wr_point) {
|
|
struct hisi_sas_complete_v3_hdr *complete_hdr;
|
|
struct device *dev = hisi_hba->dev;
|
|
int iptt;
|
|
|
|
complete_hdr = &complete_queue[rd_point];
|
|
|
|
iptt = (complete_hdr->dw1) & CMPLT_HDR_IPTT_MSK;
|
|
if (likely(iptt < HISI_SAS_COMMAND_ENTRIES_V3_HW)) {
|
|
slot = &hisi_hba->slot_info[iptt];
|
|
slot->cmplt_queue_slot = rd_point;
|
|
slot->cmplt_queue = queue;
|
|
slot_complete_v3_hw(hisi_hba, slot);
|
|
} else
|
|
dev_err(dev, "IPTT %d is invalid, discard it.\n", iptt);
|
|
|
|
if (++rd_point >= HISI_SAS_QUEUE_SLOTS)
|
|
rd_point = 0;
|
|
}
|
|
|
|
/* update rd_point */
|
|
cq->rd_point = rd_point;
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
|
|
}
|
|
|
|
static irqreturn_t cq_interrupt_v3_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_sas_cq *cq = p;
|
|
struct hisi_hba *hisi_hba = cq->hisi_hba;
|
|
int queue = cq->id;
|
|
|
|
hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue);
|
|
|
|
tasklet_schedule(&cq->tasklet);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
struct pci_dev *pdev = hisi_hba->pci_dev;
|
|
int vectors, rc;
|
|
int i, k;
|
|
int max_msi = HISI_SAS_MSI_COUNT_V3_HW;
|
|
|
|
vectors = pci_alloc_irq_vectors(hisi_hba->pci_dev, 1,
|
|
max_msi, PCI_IRQ_MSI);
|
|
if (vectors < max_msi) {
|
|
dev_err(dev, "could not allocate all msi (%d)\n", vectors);
|
|
return -ENOENT;
|
|
}
|
|
|
|
rc = devm_request_irq(dev, pci_irq_vector(pdev, 1),
|
|
int_phy_up_down_bcast_v3_hw, 0,
|
|
DRV_NAME " phy", hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "could not request phy interrupt, rc=%d\n", rc);
|
|
rc = -ENOENT;
|
|
goto free_irq_vectors;
|
|
}
|
|
|
|
rc = devm_request_irq(dev, pci_irq_vector(pdev, 2),
|
|
int_chnl_int_v3_hw, 0,
|
|
DRV_NAME " channel", hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "could not request chnl interrupt, rc=%d\n", rc);
|
|
rc = -ENOENT;
|
|
goto free_phy_irq;
|
|
}
|
|
|
|
rc = devm_request_irq(dev, pci_irq_vector(pdev, 11),
|
|
fatal_axi_int_v3_hw, 0,
|
|
DRV_NAME " fatal", hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "could not request fatal interrupt, rc=%d\n", rc);
|
|
rc = -ENOENT;
|
|
goto free_chnl_interrupt;
|
|
}
|
|
|
|
/* Init tasklets for cq only */
|
|
for (i = 0; i < hisi_hba->queue_count; i++) {
|
|
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
|
|
struct tasklet_struct *t = &cq->tasklet;
|
|
|
|
rc = devm_request_irq(dev, pci_irq_vector(pdev, i+16),
|
|
cq_interrupt_v3_hw, 0,
|
|
DRV_NAME " cq", cq);
|
|
if (rc) {
|
|
dev_err(dev,
|
|
"could not request cq%d interrupt, rc=%d\n",
|
|
i, rc);
|
|
rc = -ENOENT;
|
|
goto free_cq_irqs;
|
|
}
|
|
|
|
tasklet_init(t, cq_tasklet_v3_hw, (unsigned long)cq);
|
|
}
|
|
|
|
return 0;
|
|
|
|
free_cq_irqs:
|
|
for (k = 0; k < i; k++) {
|
|
struct hisi_sas_cq *cq = &hisi_hba->cq[k];
|
|
|
|
free_irq(pci_irq_vector(pdev, k+16), cq);
|
|
}
|
|
free_irq(pci_irq_vector(pdev, 11), hisi_hba);
|
|
free_chnl_interrupt:
|
|
free_irq(pci_irq_vector(pdev, 2), hisi_hba);
|
|
free_phy_irq:
|
|
free_irq(pci_irq_vector(pdev, 1), hisi_hba);
|
|
free_irq_vectors:
|
|
pci_free_irq_vectors(pdev);
|
|
return rc;
|
|
}
|
|
|
|
static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
|
|
{
|
|
int rc;
|
|
|
|
rc = hw_init_v3_hw(hisi_hba);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = interrupt_init_v3_hw(hisi_hba);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
|
|
struct sas_phy_linkrates *r)
|
|
{
|
|
enum sas_linkrate max = r->maximum_linkrate;
|
|
u32 prog_phy_link_rate = 0x800;
|
|
|
|
prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
|
|
prog_phy_link_rate);
|
|
}
|
|
|
|
static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct pci_dev *pdev = hisi_hba->pci_dev;
|
|
int i;
|
|
|
|
synchronize_irq(pci_irq_vector(pdev, 1));
|
|
synchronize_irq(pci_irq_vector(pdev, 2));
|
|
synchronize_irq(pci_irq_vector(pdev, 11));
|
|
for (i = 0; i < hisi_hba->queue_count; i++) {
|
|
hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK + 0x4 * i, 0x1);
|
|
synchronize_irq(pci_irq_vector(pdev, i + 16));
|
|
}
|
|
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xffffffff);
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0xffffffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x1);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x1);
|
|
hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x1);
|
|
}
|
|
}
|
|
|
|
static u32 get_phys_state_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
return hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
}
|
|
|
|
static void phy_get_events_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
struct sas_phy *sphy = sas_phy->phy;
|
|
u32 reg_value;
|
|
|
|
/* loss dword sync */
|
|
reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DWS_LOST);
|
|
sphy->loss_of_dword_sync_count += reg_value;
|
|
|
|
/* phy reset problem */
|
|
reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_RESET_PROB);
|
|
sphy->phy_reset_problem_count += reg_value;
|
|
|
|
/* invalid dword */
|
|
reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_INVLD_DW);
|
|
sphy->invalid_dword_count += reg_value;
|
|
|
|
/* disparity err */
|
|
reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DISP_ERR);
|
|
sphy->running_disparity_error_count += reg_value;
|
|
|
|
}
|
|
|
|
static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int rc;
|
|
u32 status;
|
|
|
|
interrupt_disable_v3_hw(hisi_hba);
|
|
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
|
|
hisi_sas_kill_tasklets(hisi_hba);
|
|
|
|
hisi_sas_stop_phys(hisi_hba);
|
|
|
|
mdelay(10);
|
|
|
|
hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE + AM_CTRL_GLOBAL, 0x1);
|
|
|
|
/* wait until bus idle */
|
|
rc = hisi_sas_read32_poll_timeout(AXI_MASTER_CFG_BASE +
|
|
AM_CURR_TRANS_RETURN, status,
|
|
status == 0x3, 10, 100);
|
|
if (rc) {
|
|
dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
hisi_sas_init_mem(hisi_hba);
|
|
|
|
return hw_init_v3_hw(hisi_hba);
|
|
}
|
|
|
|
static int write_gpio_v3_hw(struct hisi_hba *hisi_hba, u8 reg_type,
|
|
u8 reg_index, u8 reg_count, u8 *write_data)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
u32 *data = (u32 *)write_data;
|
|
int i;
|
|
|
|
switch (reg_type) {
|
|
case SAS_GPIO_REG_TX:
|
|
if ((reg_index + reg_count) > ((hisi_hba->n_phy + 3) / 4)) {
|
|
dev_err(dev, "write gpio: invalid reg range[%d, %d]\n",
|
|
reg_index, reg_index + reg_count - 1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < reg_count; i++)
|
|
hisi_sas_write32(hisi_hba,
|
|
SAS_GPIO_TX_0_1 + (reg_index + i) * 4,
|
|
data[i]);
|
|
break;
|
|
default:
|
|
dev_err(dev, "write gpio: unsupported or bad reg type %d\n",
|
|
reg_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wait_cmds_complete_timeout_v3_hw(struct hisi_hba *hisi_hba,
|
|
int delay_ms, int timeout_ms)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int entries, entries_old = 0, time;
|
|
|
|
for (time = 0; time < timeout_ms; time += delay_ms) {
|
|
entries = hisi_sas_read32(hisi_hba, CQE_SEND_CNT);
|
|
if (entries == entries_old)
|
|
break;
|
|
|
|
entries_old = entries;
|
|
msleep(delay_ms);
|
|
}
|
|
|
|
dev_dbg(dev, "wait commands complete %dms\n", time);
|
|
}
|
|
|
|
static struct scsi_host_template sht_v3_hw = {
|
|
.name = DRV_NAME,
|
|
.module = THIS_MODULE,
|
|
.queuecommand = sas_queuecommand,
|
|
.target_alloc = sas_target_alloc,
|
|
.slave_configure = hisi_sas_slave_configure,
|
|
.scan_finished = hisi_sas_scan_finished,
|
|
.scan_start = hisi_sas_scan_start,
|
|
.change_queue_depth = sas_change_queue_depth,
|
|
.bios_param = sas_bios_param,
|
|
.can_queue = 1,
|
|
.this_id = -1,
|
|
.sg_tablesize = SG_ALL,
|
|
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.eh_device_reset_handler = sas_eh_device_reset_handler,
|
|
.eh_target_reset_handler = sas_eh_target_reset_handler,
|
|
.target_destroy = sas_target_destroy,
|
|
.ioctl = sas_ioctl,
|
|
.shost_attrs = host_attrs,
|
|
};
|
|
|
|
static const struct hisi_sas_hw hisi_sas_v3_hw = {
|
|
.hw_init = hisi_sas_v3_init,
|
|
.setup_itct = setup_itct_v3_hw,
|
|
.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V3_HW,
|
|
.get_wideport_bitmap = get_wideport_bitmap_v3_hw,
|
|
.complete_hdr_size = sizeof(struct hisi_sas_complete_v3_hdr),
|
|
.clear_itct = clear_itct_v3_hw,
|
|
.sl_notify = sl_notify_v3_hw,
|
|
.prep_ssp = prep_ssp_v3_hw,
|
|
.prep_smp = prep_smp_v3_hw,
|
|
.prep_stp = prep_ata_v3_hw,
|
|
.prep_abort = prep_abort_v3_hw,
|
|
.get_free_slot = get_free_slot_v3_hw,
|
|
.start_delivery = start_delivery_v3_hw,
|
|
.slot_complete = slot_complete_v3_hw,
|
|
.phys_init = phys_init_v3_hw,
|
|
.phy_start = start_phy_v3_hw,
|
|
.phy_disable = disable_phy_v3_hw,
|
|
.phy_hard_reset = phy_hard_reset_v3_hw,
|
|
.phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
|
|
.phy_set_linkrate = phy_set_linkrate_v3_hw,
|
|
.dereg_device = dereg_device_v3_hw,
|
|
.soft_reset = soft_reset_v3_hw,
|
|
.get_phys_state = get_phys_state_v3_hw,
|
|
.get_events = phy_get_events_v3_hw,
|
|
.write_gpio = write_gpio_v3_hw,
|
|
.wait_cmds_complete_timeout = wait_cmds_complete_timeout_v3_hw,
|
|
};
|
|
|
|
static struct Scsi_Host *
|
|
hisi_sas_shost_alloc_pci(struct pci_dev *pdev)
|
|
{
|
|
struct Scsi_Host *shost;
|
|
struct hisi_hba *hisi_hba;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
shost = scsi_host_alloc(&sht_v3_hw, sizeof(*hisi_hba));
|
|
if (!shost) {
|
|
dev_err(dev, "shost alloc failed\n");
|
|
return NULL;
|
|
}
|
|
hisi_hba = shost_priv(shost);
|
|
|
|
INIT_WORK(&hisi_hba->rst_work, hisi_sas_rst_work_handler);
|
|
hisi_hba->hw = &hisi_sas_v3_hw;
|
|
hisi_hba->pci_dev = pdev;
|
|
hisi_hba->dev = dev;
|
|
hisi_hba->shost = shost;
|
|
SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
|
|
|
|
timer_setup(&hisi_hba->timer, NULL, 0);
|
|
|
|
if (hisi_sas_get_fw_info(hisi_hba) < 0)
|
|
goto err_out;
|
|
|
|
if (hisi_sas_alloc(hisi_hba, shost)) {
|
|
hisi_sas_free(hisi_hba);
|
|
goto err_out;
|
|
}
|
|
|
|
return shost;
|
|
err_out:
|
|
scsi_host_put(shost);
|
|
dev_err(dev, "shost alloc failed\n");
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
struct Scsi_Host *shost;
|
|
struct hisi_hba *hisi_hba;
|
|
struct device *dev = &pdev->dev;
|
|
struct asd_sas_phy **arr_phy;
|
|
struct asd_sas_port **arr_port;
|
|
struct sas_ha_struct *sha;
|
|
int rc, phy_nr, port_nr, i;
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc)
|
|
goto err_out_disable_device;
|
|
|
|
if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) ||
|
|
(pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)) {
|
|
if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
|
|
(pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
|
|
dev_err(dev, "No usable DMA addressing method\n");
|
|
rc = -EIO;
|
|
goto err_out_regions;
|
|
}
|
|
}
|
|
|
|
shost = hisi_sas_shost_alloc_pci(pdev);
|
|
if (!shost) {
|
|
rc = -ENOMEM;
|
|
goto err_out_regions;
|
|
}
|
|
|
|
sha = SHOST_TO_SAS_HA(shost);
|
|
hisi_hba = shost_priv(shost);
|
|
dev_set_drvdata(dev, sha);
|
|
|
|
hisi_hba->regs = pcim_iomap(pdev, 5, 0);
|
|
if (!hisi_hba->regs) {
|
|
dev_err(dev, "cannot map register.\n");
|
|
rc = -ENOMEM;
|
|
goto err_out_ha;
|
|
}
|
|
|
|
phy_nr = port_nr = hisi_hba->n_phy;
|
|
|
|
arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
|
|
arr_port = devm_kcalloc(dev, port_nr, sizeof(void *), GFP_KERNEL);
|
|
if (!arr_phy || !arr_port) {
|
|
rc = -ENOMEM;
|
|
goto err_out_ha;
|
|
}
|
|
|
|
sha->sas_phy = arr_phy;
|
|
sha->sas_port = arr_port;
|
|
sha->core.shost = shost;
|
|
sha->lldd_ha = hisi_hba;
|
|
|
|
shost->transportt = hisi_sas_stt;
|
|
shost->max_id = HISI_SAS_MAX_DEVICES;
|
|
shost->max_lun = ~0;
|
|
shost->max_channel = 1;
|
|
shost->max_cmd_len = 16;
|
|
shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
|
|
shost->can_queue = hisi_hba->hw->max_command_entries;
|
|
shost->cmd_per_lun = hisi_hba->hw->max_command_entries;
|
|
|
|
sha->sas_ha_name = DRV_NAME;
|
|
sha->dev = dev;
|
|
sha->lldd_module = THIS_MODULE;
|
|
sha->sas_addr = &hisi_hba->sas_addr[0];
|
|
sha->num_phys = hisi_hba->n_phy;
|
|
sha->core.shost = hisi_hba->shost;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
sha->sas_phy[i] = &hisi_hba->phy[i].sas_phy;
|
|
sha->sas_port[i] = &hisi_hba->port[i].sas_port;
|
|
}
|
|
|
|
rc = scsi_add_host(shost, dev);
|
|
if (rc)
|
|
goto err_out_ha;
|
|
|
|
rc = sas_register_ha(sha);
|
|
if (rc)
|
|
goto err_out_register_ha;
|
|
|
|
rc = hisi_hba->hw->hw_init(hisi_hba);
|
|
if (rc)
|
|
goto err_out_register_ha;
|
|
|
|
scsi_scan_host(shost);
|
|
|
|
return 0;
|
|
|
|
err_out_register_ha:
|
|
scsi_remove_host(shost);
|
|
err_out_ha:
|
|
scsi_host_put(shost);
|
|
err_out_regions:
|
|
pci_release_regions(pdev);
|
|
err_out_disable_device:
|
|
pci_disable_device(pdev);
|
|
err_out:
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
hisi_sas_v3_destroy_irqs(struct pci_dev *pdev, struct hisi_hba *hisi_hba)
|
|
{
|
|
int i;
|
|
|
|
free_irq(pci_irq_vector(pdev, 1), hisi_hba);
|
|
free_irq(pci_irq_vector(pdev, 2), hisi_hba);
|
|
free_irq(pci_irq_vector(pdev, 11), hisi_hba);
|
|
for (i = 0; i < hisi_hba->queue_count; i++) {
|
|
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
|
|
|
|
free_irq(pci_irq_vector(pdev, i+16), cq);
|
|
}
|
|
pci_free_irq_vectors(pdev);
|
|
}
|
|
|
|
static void hisi_sas_v3_remove(struct pci_dev *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct sas_ha_struct *sha = dev_get_drvdata(dev);
|
|
struct hisi_hba *hisi_hba = sha->lldd_ha;
|
|
struct Scsi_Host *shost = sha->core.shost;
|
|
|
|
if (timer_pending(&hisi_hba->timer))
|
|
del_timer(&hisi_hba->timer);
|
|
|
|
sas_unregister_ha(sha);
|
|
sas_remove_host(sha->core.shost);
|
|
|
|
hisi_sas_v3_destroy_irqs(pdev, hisi_hba);
|
|
hisi_sas_kill_tasklets(hisi_hba);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
hisi_sas_free(hisi_hba);
|
|
scsi_host_put(shost);
|
|
}
|
|
|
|
static const struct hisi_sas_hw_error sas_ras_intr0_nfe[] = {
|
|
{ .irq_msk = BIT(19), .msg = "HILINK_INT" },
|
|
{ .irq_msk = BIT(20), .msg = "HILINK_PLL0_OUT_OF_LOCK" },
|
|
{ .irq_msk = BIT(21), .msg = "HILINK_PLL1_OUT_OF_LOCK" },
|
|
{ .irq_msk = BIT(22), .msg = "HILINK_LOSS_OF_REFCLK0" },
|
|
{ .irq_msk = BIT(23), .msg = "HILINK_LOSS_OF_REFCLK1" },
|
|
{ .irq_msk = BIT(24), .msg = "DMAC0_TX_POISON" },
|
|
{ .irq_msk = BIT(25), .msg = "DMAC1_TX_POISON" },
|
|
{ .irq_msk = BIT(26), .msg = "DMAC2_TX_POISON" },
|
|
{ .irq_msk = BIT(27), .msg = "DMAC3_TX_POISON" },
|
|
{ .irq_msk = BIT(28), .msg = "DMAC4_TX_POISON" },
|
|
{ .irq_msk = BIT(29), .msg = "DMAC5_TX_POISON" },
|
|
{ .irq_msk = BIT(30), .msg = "DMAC6_TX_POISON" },
|
|
{ .irq_msk = BIT(31), .msg = "DMAC7_TX_POISON" },
|
|
};
|
|
|
|
static const struct hisi_sas_hw_error sas_ras_intr1_nfe[] = {
|
|
{ .irq_msk = BIT(0), .msg = "RXM_CFG_MEM3_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(1), .msg = "RXM_CFG_MEM2_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(2), .msg = "RXM_CFG_MEM1_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(3), .msg = "RXM_CFG_MEM0_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(4), .msg = "HGC_CQE_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(5), .msg = "LM_CFG_IOSTL_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(6), .msg = "LM_CFG_ITCTL_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(7), .msg = "HGC_ITCT_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(8), .msg = "HGC_IOST_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(9), .msg = "HGC_DQE_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(10), .msg = "DMAC0_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(11), .msg = "DMAC1_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(12), .msg = "DMAC2_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(13), .msg = "DMAC3_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(14), .msg = "DMAC4_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(15), .msg = "DMAC5_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(16), .msg = "DMAC6_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(17), .msg = "DMAC7_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(18), .msg = "OOO_RAM_ECC2B_INTR" },
|
|
{ .irq_msk = BIT(20), .msg = "HGC_DQE_POISON_INTR" },
|
|
{ .irq_msk = BIT(21), .msg = "HGC_IOST_POISON_INTR" },
|
|
{ .irq_msk = BIT(22), .msg = "HGC_ITCT_POISON_INTR" },
|
|
{ .irq_msk = BIT(23), .msg = "HGC_ITCT_NCQ_POISON_INTR" },
|
|
{ .irq_msk = BIT(24), .msg = "DMAC0_RX_POISON" },
|
|
{ .irq_msk = BIT(25), .msg = "DMAC1_RX_POISON" },
|
|
{ .irq_msk = BIT(26), .msg = "DMAC2_RX_POISON" },
|
|
{ .irq_msk = BIT(27), .msg = "DMAC3_RX_POISON" },
|
|
{ .irq_msk = BIT(28), .msg = "DMAC4_RX_POISON" },
|
|
{ .irq_msk = BIT(29), .msg = "DMAC5_RX_POISON" },
|
|
{ .irq_msk = BIT(30), .msg = "DMAC6_RX_POISON" },
|
|
{ .irq_msk = BIT(31), .msg = "DMAC7_RX_POISON" },
|
|
};
|
|
|
|
static const struct hisi_sas_hw_error sas_ras_intr2_nfe[] = {
|
|
{ .irq_msk = BIT(0), .msg = "DMAC0_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(1), .msg = "DMAC1_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(2), .msg = "DMAC2_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(3), .msg = "DMAC3_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(4), .msg = "DMAC4_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(5), .msg = "DMAC5_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(6), .msg = "DMAC6_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(7), .msg = "DMAC7_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(8), .msg = "DMAC0_FIFO_OMIT_ERR" },
|
|
{ .irq_msk = BIT(9), .msg = "DMAC1_FIFO_OMIT_ERR" },
|
|
{ .irq_msk = BIT(10), .msg = "DMAC2_FIFO_OMIT_ERR" },
|
|
{ .irq_msk = BIT(11), .msg = "DMAC3_FIFO_OMIT_ERR" },
|
|
{ .irq_msk = BIT(12), .msg = "DMAC4_FIFO_OMIT_ERR" },
|
|
{ .irq_msk = BIT(13), .msg = "DMAC5_FIFO_OMIT_ERR" },
|
|
{ .irq_msk = BIT(14), .msg = "DMAC6_FIFO_OMIT_ERR" },
|
|
{ .irq_msk = BIT(15), .msg = "DMAC7_FIFO_OMIT_ERR" },
|
|
{ .irq_msk = BIT(16), .msg = "HGC_RLSE_SLOT_UNMATCH" },
|
|
{ .irq_msk = BIT(17), .msg = "HGC_LM_ADD_FCH_LIST_ERR" },
|
|
{ .irq_msk = BIT(18), .msg = "HGC_AXI_BUS_ERR" },
|
|
{ .irq_msk = BIT(19), .msg = "HGC_FIFO_OMIT_ERR" },
|
|
};
|
|
|
|
static bool process_non_fatal_error_v3_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
const struct hisi_sas_hw_error *ras_error;
|
|
bool need_reset = false;
|
|
u32 irq_value;
|
|
int i;
|
|
|
|
irq_value = hisi_sas_read32(hisi_hba, SAS_RAS_INTR0);
|
|
for (i = 0; i < ARRAY_SIZE(sas_ras_intr0_nfe); i++) {
|
|
ras_error = &sas_ras_intr0_nfe[i];
|
|
if (ras_error->irq_msk & irq_value) {
|
|
dev_warn(dev, "SAS_RAS_INTR0: %s(irq_value=0x%x) found.\n",
|
|
ras_error->msg, irq_value);
|
|
need_reset = true;
|
|
}
|
|
}
|
|
hisi_sas_write32(hisi_hba, SAS_RAS_INTR0, irq_value);
|
|
|
|
irq_value = hisi_sas_read32(hisi_hba, SAS_RAS_INTR1);
|
|
for (i = 0; i < ARRAY_SIZE(sas_ras_intr1_nfe); i++) {
|
|
ras_error = &sas_ras_intr1_nfe[i];
|
|
if (ras_error->irq_msk & irq_value) {
|
|
dev_warn(dev, "SAS_RAS_INTR1: %s(irq_value=0x%x) found.\n",
|
|
ras_error->msg, irq_value);
|
|
need_reset = true;
|
|
}
|
|
}
|
|
hisi_sas_write32(hisi_hba, SAS_RAS_INTR1, irq_value);
|
|
|
|
irq_value = hisi_sas_read32(hisi_hba, SAS_RAS_INTR2);
|
|
for (i = 0; i < ARRAY_SIZE(sas_ras_intr2_nfe); i++) {
|
|
ras_error = &sas_ras_intr2_nfe[i];
|
|
if (ras_error->irq_msk & irq_value) {
|
|
dev_warn(dev, "SAS_RAS_INTR2: %s(irq_value=0x%x) found.\n",
|
|
ras_error->msg, irq_value);
|
|
need_reset = true;
|
|
}
|
|
}
|
|
hisi_sas_write32(hisi_hba, SAS_RAS_INTR2, irq_value);
|
|
|
|
return need_reset;
|
|
}
|
|
|
|
static pci_ers_result_t hisi_sas_error_detected_v3_hw(struct pci_dev *pdev,
|
|
pci_channel_state_t state)
|
|
{
|
|
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
|
|
struct hisi_hba *hisi_hba = sha->lldd_ha;
|
|
struct device *dev = hisi_hba->dev;
|
|
|
|
dev_info(dev, "PCI error: detected callback, state(%d)!!\n", state);
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
if (process_non_fatal_error_v3_hw(hisi_hba))
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
|
|
return PCI_ERS_RESULT_CAN_RECOVER;
|
|
}
|
|
|
|
static pci_ers_result_t hisi_sas_mmio_enabled_v3_hw(struct pci_dev *pdev)
|
|
{
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
static pci_ers_result_t hisi_sas_slot_reset_v3_hw(struct pci_dev *pdev)
|
|
{
|
|
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
|
|
struct hisi_hba *hisi_hba = sha->lldd_ha;
|
|
struct device *dev = hisi_hba->dev;
|
|
HISI_SAS_DECLARE_RST_WORK_ON_STACK(r);
|
|
|
|
dev_info(dev, "PCI error: slot reset callback!!\n");
|
|
queue_work(hisi_hba->wq, &r.work);
|
|
wait_for_completion(r.completion);
|
|
if (r.done)
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
enum {
|
|
/* instances of the controller */
|
|
hip08,
|
|
};
|
|
|
|
static int hisi_sas_v3_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
|
|
struct hisi_hba *hisi_hba = sha->lldd_ha;
|
|
struct device *dev = hisi_hba->dev;
|
|
struct Scsi_Host *shost = hisi_hba->shost;
|
|
u32 device_state, status;
|
|
int rc;
|
|
u32 reg_val;
|
|
|
|
if (!pdev->pm_cap) {
|
|
dev_err(dev, "PCI PM not supported\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
|
|
scsi_block_requests(shost);
|
|
set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
|
|
flush_workqueue(hisi_hba->wq);
|
|
/* disable DQ/PHY/bus */
|
|
interrupt_disable_v3_hw(hisi_hba);
|
|
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
|
|
hisi_sas_kill_tasklets(hisi_hba);
|
|
|
|
hisi_sas_stop_phys(hisi_hba);
|
|
|
|
reg_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
|
|
AM_CTRL_GLOBAL);
|
|
reg_val |= 0x1;
|
|
hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
|
|
AM_CTRL_GLOBAL, reg_val);
|
|
|
|
/* wait until bus idle */
|
|
rc = hisi_sas_read32_poll_timeout(AXI_MASTER_CFG_BASE +
|
|
AM_CURR_TRANS_RETURN, status,
|
|
status == 0x3, 10, 100);
|
|
if (rc) {
|
|
dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
|
|
clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
|
|
clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
|
|
scsi_unblock_requests(shost);
|
|
return rc;
|
|
}
|
|
|
|
hisi_sas_init_mem(hisi_hba);
|
|
|
|
device_state = pci_choose_state(pdev, state);
|
|
dev_warn(dev, "entering operating state [D%d]\n",
|
|
device_state);
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, device_state);
|
|
|
|
hisi_sas_release_tasks(hisi_hba);
|
|
|
|
sas_suspend_ha(sha);
|
|
return 0;
|
|
}
|
|
|
|
static int hisi_sas_v3_resume(struct pci_dev *pdev)
|
|
{
|
|
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
|
|
struct hisi_hba *hisi_hba = sha->lldd_ha;
|
|
struct Scsi_Host *shost = hisi_hba->shost;
|
|
struct device *dev = hisi_hba->dev;
|
|
unsigned int rc;
|
|
u32 device_state = pdev->current_state;
|
|
|
|
dev_warn(dev, "resuming from operating state [D%d]\n",
|
|
device_state);
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_enable_wake(pdev, PCI_D0, 0);
|
|
pci_restore_state(pdev);
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
dev_err(dev, "enable device failed during resume (%d)\n", rc);
|
|
|
|
pci_set_master(pdev);
|
|
scsi_unblock_requests(shost);
|
|
clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
|
|
|
|
sas_prep_resume_ha(sha);
|
|
init_reg_v3_hw(hisi_hba);
|
|
hisi_hba->hw->phys_init(hisi_hba);
|
|
sas_resume_ha(sha);
|
|
clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pci_device_id sas_v3_pci_table[] = {
|
|
{ PCI_VDEVICE(HUAWEI, 0xa230), hip08 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, sas_v3_pci_table);
|
|
|
|
static const struct pci_error_handlers hisi_sas_err_handler = {
|
|
.error_detected = hisi_sas_error_detected_v3_hw,
|
|
.mmio_enabled = hisi_sas_mmio_enabled_v3_hw,
|
|
.slot_reset = hisi_sas_slot_reset_v3_hw,
|
|
};
|
|
|
|
static struct pci_driver sas_v3_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sas_v3_pci_table,
|
|
.probe = hisi_sas_v3_probe,
|
|
.remove = hisi_sas_v3_remove,
|
|
.suspend = hisi_sas_v3_suspend,
|
|
.resume = hisi_sas_v3_resume,
|
|
.err_handler = &hisi_sas_err_handler,
|
|
};
|
|
|
|
module_pci_driver(sas_v3_pci_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
|
|
MODULE_DESCRIPTION("HISILICON SAS controller v3 hw driver based on pci device");
|
|
MODULE_ALIAS("pci:" DRV_NAME);
|