5984 lines
172 KiB
C
5984 lines
172 KiB
C
/*******************************************************************************
|
|
|
|
Intel 10 Gigabit PCI Express Linux driver
|
|
Copyright(c) 1999 - 2009 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/string.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/pkt_sched.h>
|
|
#include <linux/ipv6.h>
|
|
#include <net/checksum.h>
|
|
#include <net/ip6_checksum.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <scsi/fc/fc_fcoe.h>
|
|
|
|
#include "ixgbe.h"
|
|
#include "ixgbe_common.h"
|
|
|
|
char ixgbe_driver_name[] = "ixgbe";
|
|
static const char ixgbe_driver_string[] =
|
|
"Intel(R) 10 Gigabit PCI Express Network Driver";
|
|
|
|
#define DRV_VERSION "2.0.37-k2"
|
|
const char ixgbe_driver_version[] = DRV_VERSION;
|
|
static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
|
|
|
|
static const struct ixgbe_info *ixgbe_info_tbl[] = {
|
|
[board_82598] = &ixgbe_82598_info,
|
|
[board_82599] = &ixgbe_82599_info,
|
|
};
|
|
|
|
/* ixgbe_pci_tbl - PCI Device ID Table
|
|
*
|
|
* Wildcard entries (PCI_ANY_ID) should come last
|
|
* Last entry must be all 0s
|
|
*
|
|
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
|
|
* Class, Class Mask, private data (not used) }
|
|
*/
|
|
static struct pci_device_id ixgbe_pci_tbl[] = {
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX),
|
|
board_82598 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4),
|
|
board_82599 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM),
|
|
board_82599 },
|
|
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
|
|
board_82599 },
|
|
|
|
/* required last entry */
|
|
{0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl);
|
|
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
static int ixgbe_notify_dca(struct notifier_block *, unsigned long event,
|
|
void *p);
|
|
static struct notifier_block dca_notifier = {
|
|
.notifier_call = ixgbe_notify_dca,
|
|
.next = NULL,
|
|
.priority = 0
|
|
};
|
|
#endif
|
|
|
|
MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
|
|
MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
#define DEFAULT_DEBUG_LEVEL_SHIFT 3
|
|
|
|
static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter)
|
|
{
|
|
u32 ctrl_ext;
|
|
|
|
/* Let firmware take over control of h/w */
|
|
ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT,
|
|
ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD);
|
|
}
|
|
|
|
static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter)
|
|
{
|
|
u32 ctrl_ext;
|
|
|
|
/* Let firmware know the driver has taken over */
|
|
ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT,
|
|
ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD);
|
|
}
|
|
|
|
/*
|
|
* ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
|
|
* @adapter: pointer to adapter struct
|
|
* @direction: 0 for Rx, 1 for Tx, -1 for other causes
|
|
* @queue: queue to map the corresponding interrupt to
|
|
* @msix_vector: the vector to map to the corresponding queue
|
|
*
|
|
*/
|
|
static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction,
|
|
u8 queue, u8 msix_vector)
|
|
{
|
|
u32 ivar, index;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
msix_vector |= IXGBE_IVAR_ALLOC_VAL;
|
|
if (direction == -1)
|
|
direction = 0;
|
|
index = (((direction * 64) + queue) >> 2) & 0x1F;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
|
|
ivar &= ~(0xFF << (8 * (queue & 0x3)));
|
|
ivar |= (msix_vector << (8 * (queue & 0x3)));
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar);
|
|
break;
|
|
case ixgbe_mac_82599EB:
|
|
if (direction == -1) {
|
|
/* other causes */
|
|
msix_vector |= IXGBE_IVAR_ALLOC_VAL;
|
|
index = ((queue & 1) * 8);
|
|
ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC);
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (msix_vector << index);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar);
|
|
break;
|
|
} else {
|
|
/* tx or rx causes */
|
|
msix_vector |= IXGBE_IVAR_ALLOC_VAL;
|
|
index = ((16 * (queue & 1)) + (8 * direction));
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1));
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (msix_vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter,
|
|
u64 qmask)
|
|
{
|
|
u32 mask;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
|
|
} else {
|
|
mask = (qmask & 0xFFFFFFFF);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
|
|
mask = (qmask >> 32);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_tx_buffer
|
|
*tx_buffer_info)
|
|
{
|
|
tx_buffer_info->dma = 0;
|
|
if (tx_buffer_info->skb) {
|
|
skb_dma_unmap(&adapter->pdev->dev, tx_buffer_info->skb,
|
|
DMA_TO_DEVICE);
|
|
dev_kfree_skb_any(tx_buffer_info->skb);
|
|
tx_buffer_info->skb = NULL;
|
|
}
|
|
tx_buffer_info->time_stamp = 0;
|
|
/* tx_buffer_info must be completely set up in the transmit path */
|
|
}
|
|
|
|
static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring,
|
|
unsigned int eop)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
/* Detect a transmit hang in hardware, this serializes the
|
|
* check with the clearing of time_stamp and movement of eop */
|
|
adapter->detect_tx_hung = false;
|
|
if (tx_ring->tx_buffer_info[eop].time_stamp &&
|
|
time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) &&
|
|
!(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) {
|
|
/* detected Tx unit hang */
|
|
union ixgbe_adv_tx_desc *tx_desc;
|
|
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
|
|
DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
|
|
" Tx Queue <%d>\n"
|
|
" TDH, TDT <%x>, <%x>\n"
|
|
" next_to_use <%x>\n"
|
|
" next_to_clean <%x>\n"
|
|
"tx_buffer_info[next_to_clean]\n"
|
|
" time_stamp <%lx>\n"
|
|
" jiffies <%lx>\n",
|
|
tx_ring->queue_index,
|
|
IXGBE_READ_REG(hw, tx_ring->head),
|
|
IXGBE_READ_REG(hw, tx_ring->tail),
|
|
tx_ring->next_to_use, eop,
|
|
tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
#define IXGBE_MAX_TXD_PWR 14
|
|
#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR)
|
|
|
|
/* Tx Descriptors needed, worst case */
|
|
#define TXD_USE_COUNT(S) (((S) >> IXGBE_MAX_TXD_PWR) + \
|
|
(((S) & (IXGBE_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
|
|
#define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \
|
|
MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */
|
|
|
|
static void ixgbe_tx_timeout(struct net_device *netdev);
|
|
|
|
/**
|
|
* ixgbe_clean_tx_irq - Reclaim resources after transmit completes
|
|
* @q_vector: structure containing interrupt and ring information
|
|
* @tx_ring: tx ring to clean
|
|
**/
|
|
static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
|
|
struct ixgbe_ring *tx_ring)
|
|
{
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct net_device *netdev = adapter->netdev;
|
|
union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
|
|
struct ixgbe_tx_buffer *tx_buffer_info;
|
|
unsigned int i, eop, count = 0;
|
|
unsigned int total_bytes = 0, total_packets = 0;
|
|
|
|
i = tx_ring->next_to_clean;
|
|
eop = tx_ring->tx_buffer_info[i].next_to_watch;
|
|
eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
|
|
|
|
while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
|
|
(count < tx_ring->work_limit)) {
|
|
bool cleaned = false;
|
|
for ( ; !cleaned; count++) {
|
|
struct sk_buff *skb;
|
|
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
|
|
tx_buffer_info = &tx_ring->tx_buffer_info[i];
|
|
cleaned = (i == eop);
|
|
skb = tx_buffer_info->skb;
|
|
|
|
if (cleaned && skb) {
|
|
unsigned int segs, bytecount;
|
|
unsigned int hlen = skb_headlen(skb);
|
|
|
|
/* gso_segs is currently only valid for tcp */
|
|
segs = skb_shinfo(skb)->gso_segs ?: 1;
|
|
#ifdef IXGBE_FCOE
|
|
/* adjust for FCoE Sequence Offload */
|
|
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
|
|
&& (skb->protocol == htons(ETH_P_FCOE)) &&
|
|
skb_is_gso(skb)) {
|
|
hlen = skb_transport_offset(skb) +
|
|
sizeof(struct fc_frame_header) +
|
|
sizeof(struct fcoe_crc_eof);
|
|
segs = DIV_ROUND_UP(skb->len - hlen,
|
|
skb_shinfo(skb)->gso_size);
|
|
}
|
|
#endif /* IXGBE_FCOE */
|
|
/* multiply data chunks by size of headers */
|
|
bytecount = ((segs - 1) * hlen) + skb->len;
|
|
total_packets += segs;
|
|
total_bytes += bytecount;
|
|
}
|
|
|
|
ixgbe_unmap_and_free_tx_resource(adapter,
|
|
tx_buffer_info);
|
|
|
|
tx_desc->wb.status = 0;
|
|
|
|
i++;
|
|
if (i == tx_ring->count)
|
|
i = 0;
|
|
}
|
|
|
|
eop = tx_ring->tx_buffer_info[i].next_to_watch;
|
|
eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
|
|
}
|
|
|
|
tx_ring->next_to_clean = i;
|
|
|
|
#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
|
|
if (unlikely(count && netif_carrier_ok(netdev) &&
|
|
(IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
|
|
/* Make sure that anybody stopping the queue after this
|
|
* sees the new next_to_clean.
|
|
*/
|
|
smp_mb();
|
|
if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
|
|
!test_bit(__IXGBE_DOWN, &adapter->state)) {
|
|
netif_wake_subqueue(netdev, tx_ring->queue_index);
|
|
++adapter->restart_queue;
|
|
}
|
|
}
|
|
|
|
if (adapter->detect_tx_hung) {
|
|
if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
|
|
/* schedule immediate reset if we believe we hung */
|
|
DPRINTK(PROBE, INFO,
|
|
"tx hang %d detected, resetting adapter\n",
|
|
adapter->tx_timeout_count + 1);
|
|
ixgbe_tx_timeout(adapter->netdev);
|
|
}
|
|
}
|
|
|
|
/* re-arm the interrupt */
|
|
if (count >= tx_ring->work_limit)
|
|
ixgbe_irq_rearm_queues(adapter, ((u64)1 << q_vector->v_idx));
|
|
|
|
tx_ring->total_bytes += total_bytes;
|
|
tx_ring->total_packets += total_packets;
|
|
tx_ring->stats.packets += total_packets;
|
|
tx_ring->stats.bytes += total_bytes;
|
|
adapter->net_stats.tx_bytes += total_bytes;
|
|
adapter->net_stats.tx_packets += total_packets;
|
|
return (count < tx_ring->work_limit);
|
|
}
|
|
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *rx_ring)
|
|
{
|
|
u32 rxctrl;
|
|
int cpu = get_cpu();
|
|
int q = rx_ring - adapter->rx_ring;
|
|
|
|
if (rx_ring->cpu != cpu) {
|
|
rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q));
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK;
|
|
rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
|
|
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK_82599;
|
|
rxctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
|
|
IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599);
|
|
}
|
|
rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
|
|
rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
|
|
rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
|
|
rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
|
|
IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl);
|
|
rx_ring->cpu = cpu;
|
|
}
|
|
put_cpu();
|
|
}
|
|
|
|
static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring)
|
|
{
|
|
u32 txctrl;
|
|
int cpu = get_cpu();
|
|
int q = tx_ring - adapter->tx_ring;
|
|
|
|
if (tx_ring->cpu != cpu) {
|
|
txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q));
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
|
|
txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
|
|
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
|
|
txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
|
|
IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
|
|
}
|
|
txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl);
|
|
tx_ring->cpu = cpu;
|
|
}
|
|
put_cpu();
|
|
}
|
|
|
|
static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
|
|
if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
|
|
return;
|
|
|
|
/* always use CB2 mode, difference is masked in the CB driver */
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
adapter->tx_ring[i].cpu = -1;
|
|
ixgbe_update_tx_dca(adapter, &adapter->tx_ring[i]);
|
|
}
|
|
for (i = 0; i < adapter->num_rx_queues; i++) {
|
|
adapter->rx_ring[i].cpu = -1;
|
|
ixgbe_update_rx_dca(adapter, &adapter->rx_ring[i]);
|
|
}
|
|
}
|
|
|
|
static int __ixgbe_notify_dca(struct device *dev, void *data)
|
|
{
|
|
struct net_device *netdev = dev_get_drvdata(dev);
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
unsigned long event = *(unsigned long *)data;
|
|
|
|
switch (event) {
|
|
case DCA_PROVIDER_ADD:
|
|
/* if we're already enabled, don't do it again */
|
|
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
|
|
break;
|
|
if (dca_add_requester(dev) == 0) {
|
|
adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
|
|
ixgbe_setup_dca(adapter);
|
|
break;
|
|
}
|
|
/* Fall Through since DCA is disabled. */
|
|
case DCA_PROVIDER_REMOVE:
|
|
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
|
|
dca_remove_requester(dev);
|
|
adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_IXGBE_DCA */
|
|
/**
|
|
* ixgbe_receive_skb - Send a completed packet up the stack
|
|
* @adapter: board private structure
|
|
* @skb: packet to send up
|
|
* @status: hardware indication of status of receive
|
|
* @rx_ring: rx descriptor ring (for a specific queue) to setup
|
|
* @rx_desc: rx descriptor
|
|
**/
|
|
static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
|
|
struct sk_buff *skb, u8 status,
|
|
struct ixgbe_ring *ring,
|
|
union ixgbe_adv_rx_desc *rx_desc)
|
|
{
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct napi_struct *napi = &q_vector->napi;
|
|
bool is_vlan = (status & IXGBE_RXD_STAT_VP);
|
|
u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
|
|
|
|
skb_record_rx_queue(skb, ring->queue_index);
|
|
if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
|
|
if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK))
|
|
vlan_gro_receive(napi, adapter->vlgrp, tag, skb);
|
|
else
|
|
napi_gro_receive(napi, skb);
|
|
} else {
|
|
if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK))
|
|
vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
|
|
else
|
|
netif_rx(skb);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum
|
|
* @adapter: address of board private structure
|
|
* @status_err: hardware indication of status of receive
|
|
* @skb: skb currently being received and modified
|
|
**/
|
|
static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
|
|
union ixgbe_adv_rx_desc *rx_desc,
|
|
struct sk_buff *skb)
|
|
{
|
|
u32 status_err = le32_to_cpu(rx_desc->wb.upper.status_error);
|
|
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
/* Rx csum disabled */
|
|
if (!(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED))
|
|
return;
|
|
|
|
/* if IP and error */
|
|
if ((status_err & IXGBE_RXD_STAT_IPCS) &&
|
|
(status_err & IXGBE_RXDADV_ERR_IPE)) {
|
|
adapter->hw_csum_rx_error++;
|
|
return;
|
|
}
|
|
|
|
if (!(status_err & IXGBE_RXD_STAT_L4CS))
|
|
return;
|
|
|
|
if (status_err & IXGBE_RXDADV_ERR_TCPE) {
|
|
u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
|
|
|
|
/*
|
|
* 82599 errata, UDP frames with a 0 checksum can be marked as
|
|
* checksum errors.
|
|
*/
|
|
if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) &&
|
|
(adapter->hw.mac.type == ixgbe_mac_82599EB))
|
|
return;
|
|
|
|
adapter->hw_csum_rx_error++;
|
|
return;
|
|
}
|
|
|
|
/* It must be a TCP or UDP packet with a valid checksum */
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
adapter->hw_csum_rx_good++;
|
|
}
|
|
|
|
static inline void ixgbe_release_rx_desc(struct ixgbe_hw *hw,
|
|
struct ixgbe_ring *rx_ring, u32 val)
|
|
{
|
|
/*
|
|
* Force memory writes to complete before letting h/w
|
|
* know there are new descriptors to fetch. (Only
|
|
* applicable for weak-ordered memory model archs,
|
|
* such as IA-64).
|
|
*/
|
|
wmb();
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(rx_ring->reg_idx), val);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_alloc_rx_buffers - Replace used receive buffers; packet split
|
|
* @adapter: address of board private structure
|
|
**/
|
|
static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *rx_ring,
|
|
int cleaned_count)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
union ixgbe_adv_rx_desc *rx_desc;
|
|
struct ixgbe_rx_buffer *bi;
|
|
unsigned int i;
|
|
|
|
i = rx_ring->next_to_use;
|
|
bi = &rx_ring->rx_buffer_info[i];
|
|
|
|
while (cleaned_count--) {
|
|
rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
|
|
|
|
if (!bi->page_dma &&
|
|
(rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)) {
|
|
if (!bi->page) {
|
|
bi->page = alloc_page(GFP_ATOMIC);
|
|
if (!bi->page) {
|
|
adapter->alloc_rx_page_failed++;
|
|
goto no_buffers;
|
|
}
|
|
bi->page_offset = 0;
|
|
} else {
|
|
/* use a half page if we're re-using */
|
|
bi->page_offset ^= (PAGE_SIZE / 2);
|
|
}
|
|
|
|
bi->page_dma = pci_map_page(pdev, bi->page,
|
|
bi->page_offset,
|
|
(PAGE_SIZE / 2),
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
|
|
if (!bi->skb) {
|
|
struct sk_buff *skb;
|
|
skb = netdev_alloc_skb(adapter->netdev,
|
|
(rx_ring->rx_buf_len +
|
|
NET_IP_ALIGN));
|
|
|
|
if (!skb) {
|
|
adapter->alloc_rx_buff_failed++;
|
|
goto no_buffers;
|
|
}
|
|
|
|
/*
|
|
* Make buffer alignment 2 beyond a 16 byte boundary
|
|
* this will result in a 16 byte aligned IP header after
|
|
* the 14 byte MAC header is removed
|
|
*/
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
|
|
bi->skb = skb;
|
|
bi->dma = pci_map_single(pdev, skb->data,
|
|
rx_ring->rx_buf_len,
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
/* Refresh the desc even if buffer_addrs didn't change because
|
|
* each write-back erases this info. */
|
|
if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
|
|
rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
|
|
rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
|
|
} else {
|
|
rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
|
|
}
|
|
|
|
i++;
|
|
if (i == rx_ring->count)
|
|
i = 0;
|
|
bi = &rx_ring->rx_buffer_info[i];
|
|
}
|
|
|
|
no_buffers:
|
|
if (rx_ring->next_to_use != i) {
|
|
rx_ring->next_to_use = i;
|
|
if (i-- == 0)
|
|
i = (rx_ring->count - 1);
|
|
|
|
ixgbe_release_rx_desc(&adapter->hw, rx_ring, i);
|
|
}
|
|
}
|
|
|
|
static inline u16 ixgbe_get_hdr_info(union ixgbe_adv_rx_desc *rx_desc)
|
|
{
|
|
return rx_desc->wb.lower.lo_dword.hs_rss.hdr_info;
|
|
}
|
|
|
|
static inline u16 ixgbe_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc)
|
|
{
|
|
return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
|
|
}
|
|
|
|
static inline u32 ixgbe_get_rsc_count(union ixgbe_adv_rx_desc *rx_desc)
|
|
{
|
|
return (le32_to_cpu(rx_desc->wb.lower.lo_dword.data) &
|
|
IXGBE_RXDADV_RSCCNT_MASK) >>
|
|
IXGBE_RXDADV_RSCCNT_SHIFT;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_transform_rsc_queue - change rsc queue into a full packet
|
|
* @skb: pointer to the last skb in the rsc queue
|
|
*
|
|
* This function changes a queue full of hw rsc buffers into a completed
|
|
* packet. It uses the ->prev pointers to find the first packet and then
|
|
* turns it into the frag list owner.
|
|
**/
|
|
static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb)
|
|
{
|
|
unsigned int frag_list_size = 0;
|
|
|
|
while (skb->prev) {
|
|
struct sk_buff *prev = skb->prev;
|
|
frag_list_size += skb->len;
|
|
skb->prev = NULL;
|
|
skb = prev;
|
|
}
|
|
|
|
skb_shinfo(skb)->frag_list = skb->next;
|
|
skb->next = NULL;
|
|
skb->len += frag_list_size;
|
|
skb->data_len += frag_list_size;
|
|
skb->truesize += frag_list_size;
|
|
return skb;
|
|
}
|
|
|
|
static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
|
|
struct ixgbe_ring *rx_ring,
|
|
int *work_done, int work_to_do)
|
|
{
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
|
|
struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer;
|
|
struct sk_buff *skb;
|
|
unsigned int i, rsc_count = 0;
|
|
u32 len, staterr;
|
|
u16 hdr_info;
|
|
bool cleaned = false;
|
|
int cleaned_count = 0;
|
|
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
|
|
#ifdef IXGBE_FCOE
|
|
int ddp_bytes = 0;
|
|
#endif /* IXGBE_FCOE */
|
|
|
|
i = rx_ring->next_to_clean;
|
|
rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
|
|
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
|
|
rx_buffer_info = &rx_ring->rx_buffer_info[i];
|
|
|
|
while (staterr & IXGBE_RXD_STAT_DD) {
|
|
u32 upper_len = 0;
|
|
if (*work_done >= work_to_do)
|
|
break;
|
|
(*work_done)++;
|
|
|
|
if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
|
|
hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc));
|
|
len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
|
|
IXGBE_RXDADV_HDRBUFLEN_SHIFT;
|
|
if (hdr_info & IXGBE_RXDADV_SPH)
|
|
adapter->rx_hdr_split++;
|
|
if (len > IXGBE_RX_HDR_SIZE)
|
|
len = IXGBE_RX_HDR_SIZE;
|
|
upper_len = le16_to_cpu(rx_desc->wb.upper.length);
|
|
} else {
|
|
len = le16_to_cpu(rx_desc->wb.upper.length);
|
|
}
|
|
|
|
cleaned = true;
|
|
skb = rx_buffer_info->skb;
|
|
prefetch(skb->data - NET_IP_ALIGN);
|
|
rx_buffer_info->skb = NULL;
|
|
|
|
if (rx_buffer_info->dma) {
|
|
pci_unmap_single(pdev, rx_buffer_info->dma,
|
|
rx_ring->rx_buf_len,
|
|
PCI_DMA_FROMDEVICE);
|
|
rx_buffer_info->dma = 0;
|
|
skb_put(skb, len);
|
|
}
|
|
|
|
if (upper_len) {
|
|
pci_unmap_page(pdev, rx_buffer_info->page_dma,
|
|
PAGE_SIZE / 2, PCI_DMA_FROMDEVICE);
|
|
rx_buffer_info->page_dma = 0;
|
|
skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
|
|
rx_buffer_info->page,
|
|
rx_buffer_info->page_offset,
|
|
upper_len);
|
|
|
|
if ((rx_ring->rx_buf_len > (PAGE_SIZE / 2)) ||
|
|
(page_count(rx_buffer_info->page) != 1))
|
|
rx_buffer_info->page = NULL;
|
|
else
|
|
get_page(rx_buffer_info->page);
|
|
|
|
skb->len += upper_len;
|
|
skb->data_len += upper_len;
|
|
skb->truesize += upper_len;
|
|
}
|
|
|
|
i++;
|
|
if (i == rx_ring->count)
|
|
i = 0;
|
|
|
|
next_rxd = IXGBE_RX_DESC_ADV(*rx_ring, i);
|
|
prefetch(next_rxd);
|
|
cleaned_count++;
|
|
|
|
if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
|
|
rsc_count = ixgbe_get_rsc_count(rx_desc);
|
|
|
|
if (rsc_count) {
|
|
u32 nextp = (staterr & IXGBE_RXDADV_NEXTP_MASK) >>
|
|
IXGBE_RXDADV_NEXTP_SHIFT;
|
|
next_buffer = &rx_ring->rx_buffer_info[nextp];
|
|
rx_ring->rsc_count += (rsc_count - 1);
|
|
} else {
|
|
next_buffer = &rx_ring->rx_buffer_info[i];
|
|
}
|
|
|
|
if (staterr & IXGBE_RXD_STAT_EOP) {
|
|
if (skb->prev)
|
|
skb = ixgbe_transform_rsc_queue(skb);
|
|
rx_ring->stats.packets++;
|
|
rx_ring->stats.bytes += skb->len;
|
|
} else {
|
|
if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
|
|
rx_buffer_info->skb = next_buffer->skb;
|
|
rx_buffer_info->dma = next_buffer->dma;
|
|
next_buffer->skb = skb;
|
|
next_buffer->dma = 0;
|
|
} else {
|
|
skb->next = next_buffer->skb;
|
|
skb->next->prev = skb;
|
|
}
|
|
adapter->non_eop_descs++;
|
|
goto next_desc;
|
|
}
|
|
|
|
if (staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK) {
|
|
dev_kfree_skb_irq(skb);
|
|
goto next_desc;
|
|
}
|
|
|
|
ixgbe_rx_checksum(adapter, rx_desc, skb);
|
|
|
|
/* probably a little skewed due to removing CRC */
|
|
total_rx_bytes += skb->len;
|
|
total_rx_packets++;
|
|
|
|
skb->protocol = eth_type_trans(skb, adapter->netdev);
|
|
#ifdef IXGBE_FCOE
|
|
/* if ddp, not passing to ULD unless for FCP_RSP or error */
|
|
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
|
|
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
|
|
if (!ddp_bytes)
|
|
goto next_desc;
|
|
}
|
|
#endif /* IXGBE_FCOE */
|
|
ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
|
|
|
|
next_desc:
|
|
rx_desc->wb.upper.status_error = 0;
|
|
|
|
/* return some buffers to hardware, one at a time is too slow */
|
|
if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) {
|
|
ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
|
|
cleaned_count = 0;
|
|
}
|
|
|
|
/* use prefetched values */
|
|
rx_desc = next_rxd;
|
|
rx_buffer_info = &rx_ring->rx_buffer_info[i];
|
|
|
|
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
|
|
}
|
|
|
|
rx_ring->next_to_clean = i;
|
|
cleaned_count = IXGBE_DESC_UNUSED(rx_ring);
|
|
|
|
if (cleaned_count)
|
|
ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
|
|
|
|
#ifdef IXGBE_FCOE
|
|
/* include DDPed FCoE data */
|
|
if (ddp_bytes > 0) {
|
|
unsigned int mss;
|
|
|
|
mss = adapter->netdev->mtu - sizeof(struct fcoe_hdr) -
|
|
sizeof(struct fc_frame_header) -
|
|
sizeof(struct fcoe_crc_eof);
|
|
if (mss > 512)
|
|
mss &= ~511;
|
|
total_rx_bytes += ddp_bytes;
|
|
total_rx_packets += DIV_ROUND_UP(ddp_bytes, mss);
|
|
}
|
|
#endif /* IXGBE_FCOE */
|
|
|
|
rx_ring->total_packets += total_rx_packets;
|
|
rx_ring->total_bytes += total_rx_bytes;
|
|
adapter->net_stats.rx_bytes += total_rx_bytes;
|
|
adapter->net_stats.rx_packets += total_rx_packets;
|
|
|
|
return cleaned;
|
|
}
|
|
|
|
static int ixgbe_clean_rxonly(struct napi_struct *, int);
|
|
/**
|
|
* ixgbe_configure_msix - Configure MSI-X hardware
|
|
* @adapter: board private structure
|
|
*
|
|
* ixgbe_configure_msix sets up the hardware to properly generate MSI-X
|
|
* interrupts.
|
|
**/
|
|
static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_q_vector *q_vector;
|
|
int i, j, q_vectors, v_idx, r_idx;
|
|
u32 mask;
|
|
|
|
q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
|
|
|
|
/*
|
|
* Populate the IVAR table and set the ITR values to the
|
|
* corresponding register.
|
|
*/
|
|
for (v_idx = 0; v_idx < q_vectors; v_idx++) {
|
|
q_vector = adapter->q_vector[v_idx];
|
|
/* XXX for_each_bit(...) */
|
|
r_idx = find_first_bit(q_vector->rxr_idx,
|
|
adapter->num_rx_queues);
|
|
|
|
for (i = 0; i < q_vector->rxr_count; i++) {
|
|
j = adapter->rx_ring[r_idx].reg_idx;
|
|
ixgbe_set_ivar(adapter, 0, j, v_idx);
|
|
r_idx = find_next_bit(q_vector->rxr_idx,
|
|
adapter->num_rx_queues,
|
|
r_idx + 1);
|
|
}
|
|
r_idx = find_first_bit(q_vector->txr_idx,
|
|
adapter->num_tx_queues);
|
|
|
|
for (i = 0; i < q_vector->txr_count; i++) {
|
|
j = adapter->tx_ring[r_idx].reg_idx;
|
|
ixgbe_set_ivar(adapter, 1, j, v_idx);
|
|
r_idx = find_next_bit(q_vector->txr_idx,
|
|
adapter->num_tx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
/* if this is a tx only vector halve the interrupt rate */
|
|
if (q_vector->txr_count && !q_vector->rxr_count)
|
|
q_vector->eitr = (adapter->eitr_param >> 1);
|
|
else if (q_vector->rxr_count)
|
|
/* rx only */
|
|
q_vector->eitr = adapter->eitr_param;
|
|
|
|
ixgbe_write_eitr(q_vector);
|
|
}
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
|
|
ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX,
|
|
v_idx);
|
|
else if (adapter->hw.mac.type == ixgbe_mac_82599EB)
|
|
ixgbe_set_ivar(adapter, -1, 1, v_idx);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950);
|
|
|
|
/* set up to autoclear timer, and the vectors */
|
|
mask = IXGBE_EIMS_ENABLE_MASK;
|
|
mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
|
|
}
|
|
|
|
enum latency_range {
|
|
lowest_latency = 0,
|
|
low_latency = 1,
|
|
bulk_latency = 2,
|
|
latency_invalid = 255
|
|
};
|
|
|
|
/**
|
|
* ixgbe_update_itr - update the dynamic ITR value based on statistics
|
|
* @adapter: pointer to adapter
|
|
* @eitr: eitr setting (ints per sec) to give last timeslice
|
|
* @itr_setting: current throttle rate in ints/second
|
|
* @packets: the number of packets during this measurement interval
|
|
* @bytes: the number of bytes during this measurement interval
|
|
*
|
|
* Stores a new ITR value based on packets and byte
|
|
* counts during the last interrupt. The advantage of per interrupt
|
|
* computation is faster updates and more accurate ITR for the current
|
|
* traffic pattern. Constants in this function were computed
|
|
* based on theoretical maximum wire speed and thresholds were set based
|
|
* on testing data as well as attempting to minimize response time
|
|
* while increasing bulk throughput.
|
|
* this functionality is controlled by the InterruptThrottleRate module
|
|
* parameter (see ixgbe_param.c)
|
|
**/
|
|
static u8 ixgbe_update_itr(struct ixgbe_adapter *adapter,
|
|
u32 eitr, u8 itr_setting,
|
|
int packets, int bytes)
|
|
{
|
|
unsigned int retval = itr_setting;
|
|
u32 timepassed_us;
|
|
u64 bytes_perint;
|
|
|
|
if (packets == 0)
|
|
goto update_itr_done;
|
|
|
|
|
|
/* simple throttlerate management
|
|
* 0-20MB/s lowest (100000 ints/s)
|
|
* 20-100MB/s low (20000 ints/s)
|
|
* 100-1249MB/s bulk (8000 ints/s)
|
|
*/
|
|
/* what was last interrupt timeslice? */
|
|
timepassed_us = 1000000/eitr;
|
|
bytes_perint = bytes / timepassed_us; /* bytes/usec */
|
|
|
|
switch (itr_setting) {
|
|
case lowest_latency:
|
|
if (bytes_perint > adapter->eitr_low)
|
|
retval = low_latency;
|
|
break;
|
|
case low_latency:
|
|
if (bytes_perint > adapter->eitr_high)
|
|
retval = bulk_latency;
|
|
else if (bytes_perint <= adapter->eitr_low)
|
|
retval = lowest_latency;
|
|
break;
|
|
case bulk_latency:
|
|
if (bytes_perint <= adapter->eitr_high)
|
|
retval = low_latency;
|
|
break;
|
|
}
|
|
|
|
update_itr_done:
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_eitr - write EITR register in hardware specific way
|
|
* @q_vector: structure containing interrupt and ring information
|
|
*
|
|
* This function is made to be called by ethtool and by the driver
|
|
* when it needs to update EITR registers at runtime. Hardware
|
|
* specific quirks/differences are taken care of here.
|
|
*/
|
|
void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
|
|
{
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int v_idx = q_vector->v_idx;
|
|
u32 itr_reg = EITR_INTS_PER_SEC_TO_REG(q_vector->eitr);
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
/* must write high and low 16 bits to reset counter */
|
|
itr_reg |= (itr_reg << 16);
|
|
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
/*
|
|
* set the WDIS bit to not clear the timer bits and cause an
|
|
* immediate assertion of the interrupt
|
|
*/
|
|
itr_reg |= IXGBE_EITR_CNT_WDIS;
|
|
}
|
|
IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg);
|
|
}
|
|
|
|
static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
|
|
{
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
u32 new_itr;
|
|
u8 current_itr, ret_itr;
|
|
int i, r_idx;
|
|
struct ixgbe_ring *rx_ring, *tx_ring;
|
|
|
|
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
|
|
for (i = 0; i < q_vector->txr_count; i++) {
|
|
tx_ring = &(adapter->tx_ring[r_idx]);
|
|
ret_itr = ixgbe_update_itr(adapter, q_vector->eitr,
|
|
q_vector->tx_itr,
|
|
tx_ring->total_packets,
|
|
tx_ring->total_bytes);
|
|
/* if the result for this queue would decrease interrupt
|
|
* rate for this vector then use that result */
|
|
q_vector->tx_itr = ((q_vector->tx_itr > ret_itr) ?
|
|
q_vector->tx_itr - 1 : ret_itr);
|
|
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
|
|
for (i = 0; i < q_vector->rxr_count; i++) {
|
|
rx_ring = &(adapter->rx_ring[r_idx]);
|
|
ret_itr = ixgbe_update_itr(adapter, q_vector->eitr,
|
|
q_vector->rx_itr,
|
|
rx_ring->total_packets,
|
|
rx_ring->total_bytes);
|
|
/* if the result for this queue would decrease interrupt
|
|
* rate for this vector then use that result */
|
|
q_vector->rx_itr = ((q_vector->rx_itr > ret_itr) ?
|
|
q_vector->rx_itr - 1 : ret_itr);
|
|
r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
current_itr = max(q_vector->rx_itr, q_vector->tx_itr);
|
|
|
|
switch (current_itr) {
|
|
/* counts and packets in update_itr are dependent on these numbers */
|
|
case lowest_latency:
|
|
new_itr = 100000;
|
|
break;
|
|
case low_latency:
|
|
new_itr = 20000; /* aka hwitr = ~200 */
|
|
break;
|
|
case bulk_latency:
|
|
default:
|
|
new_itr = 8000;
|
|
break;
|
|
}
|
|
|
|
if (new_itr != q_vector->eitr) {
|
|
/* do an exponential smoothing */
|
|
new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
|
|
|
|
/* save the algorithm value here, not the smoothed one */
|
|
q_vector->eitr = new_itr;
|
|
|
|
ixgbe_write_eitr(q_vector);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
|
|
(eicr & IXGBE_EICR_GPI_SDP1)) {
|
|
DPRINTK(PROBE, CRIT, "Fan has stopped, replace the adapter\n");
|
|
/* write to clear the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
|
|
}
|
|
}
|
|
|
|
static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
if (eicr & IXGBE_EICR_GPI_SDP1) {
|
|
/* Clear the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
|
|
schedule_work(&adapter->multispeed_fiber_task);
|
|
} else if (eicr & IXGBE_EICR_GPI_SDP2) {
|
|
/* Clear the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
|
|
schedule_work(&adapter->sfp_config_module_task);
|
|
} else {
|
|
/* Interrupt isn't for us... */
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void ixgbe_check_lsc(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
adapter->lsc_int++;
|
|
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
|
|
adapter->link_check_timeout = jiffies;
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
|
|
schedule_work(&adapter->watchdog_task);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
|
|
{
|
|
struct net_device *netdev = data;
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 eicr;
|
|
|
|
/*
|
|
* Workaround for Silicon errata. Use clear-by-write instead
|
|
* of clear-by-read. Reading with EICS will return the
|
|
* interrupt causes without clearing, which later be done
|
|
* with the write to EICR.
|
|
*/
|
|
eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr);
|
|
|
|
if (eicr & IXGBE_EICR_LSC)
|
|
ixgbe_check_lsc(adapter);
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
ixgbe_check_fan_failure(adapter, eicr);
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
ixgbe_check_sfp_event(adapter, eicr);
|
|
|
|
/* Handle Flow Director Full threshold interrupt */
|
|
if (eicr & IXGBE_EICR_FLOW_DIR) {
|
|
int i;
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_FLOW_DIR);
|
|
/* Disable transmits before FDIR Re-initialization */
|
|
netif_tx_stop_all_queues(netdev);
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
struct ixgbe_ring *tx_ring =
|
|
&adapter->tx_ring[i];
|
|
if (test_and_clear_bit(__IXGBE_FDIR_INIT_DONE,
|
|
&tx_ring->reinit_state))
|
|
schedule_work(&adapter->fdir_reinit_task);
|
|
}
|
|
}
|
|
}
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter,
|
|
u64 qmask)
|
|
{
|
|
u32 mask;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
|
|
} else {
|
|
mask = (qmask & 0xFFFFFFFF);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(0), mask);
|
|
mask = (qmask >> 32);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1), mask);
|
|
}
|
|
/* skip the flush */
|
|
}
|
|
|
|
static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
|
|
u64 qmask)
|
|
{
|
|
u32 mask;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, mask);
|
|
} else {
|
|
mask = (qmask & 0xFFFFFFFF);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), mask);
|
|
mask = (qmask >> 32);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), mask);
|
|
}
|
|
/* skip the flush */
|
|
}
|
|
|
|
static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
|
|
{
|
|
struct ixgbe_q_vector *q_vector = data;
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct ixgbe_ring *tx_ring;
|
|
int i, r_idx;
|
|
|
|
if (!q_vector->txr_count)
|
|
return IRQ_HANDLED;
|
|
|
|
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
|
|
for (i = 0; i < q_vector->txr_count; i++) {
|
|
tx_ring = &(adapter->tx_ring[r_idx]);
|
|
tx_ring->total_bytes = 0;
|
|
tx_ring->total_packets = 0;
|
|
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
/* disable interrupts on this vector only */
|
|
ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
|
|
napi_schedule(&q_vector->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_msix_clean_rx - single unshared vector rx clean (all queues)
|
|
* @irq: unused
|
|
* @data: pointer to our q_vector struct for this interrupt vector
|
|
**/
|
|
static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
|
|
{
|
|
struct ixgbe_q_vector *q_vector = data;
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct ixgbe_ring *rx_ring;
|
|
int r_idx;
|
|
int i;
|
|
|
|
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
|
|
for (i = 0; i < q_vector->rxr_count; i++) {
|
|
rx_ring = &(adapter->rx_ring[r_idx]);
|
|
rx_ring->total_bytes = 0;
|
|
rx_ring->total_packets = 0;
|
|
r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
if (!q_vector->rxr_count)
|
|
return IRQ_HANDLED;
|
|
|
|
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
|
|
rx_ring = &(adapter->rx_ring[r_idx]);
|
|
/* disable interrupts on this vector only */
|
|
ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
|
|
napi_schedule(&q_vector->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
|
|
{
|
|
struct ixgbe_q_vector *q_vector = data;
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct ixgbe_ring *ring;
|
|
int r_idx;
|
|
int i;
|
|
|
|
if (!q_vector->txr_count && !q_vector->rxr_count)
|
|
return IRQ_HANDLED;
|
|
|
|
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
|
|
for (i = 0; i < q_vector->txr_count; i++) {
|
|
ring = &(adapter->tx_ring[r_idx]);
|
|
ring->total_bytes = 0;
|
|
ring->total_packets = 0;
|
|
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
|
|
for (i = 0; i < q_vector->rxr_count; i++) {
|
|
ring = &(adapter->rx_ring[r_idx]);
|
|
ring->total_bytes = 0;
|
|
ring->total_packets = 0;
|
|
r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
/* disable interrupts on this vector only */
|
|
ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
|
|
napi_schedule(&q_vector->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clean_rxonly - msix (aka one shot) rx clean routine
|
|
* @napi: napi struct with our devices info in it
|
|
* @budget: amount of work driver is allowed to do this pass, in packets
|
|
*
|
|
* This function is optimized for cleaning one queue only on a single
|
|
* q_vector!!!
|
|
**/
|
|
static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
|
|
{
|
|
struct ixgbe_q_vector *q_vector =
|
|
container_of(napi, struct ixgbe_q_vector, napi);
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct ixgbe_ring *rx_ring = NULL;
|
|
int work_done = 0;
|
|
long r_idx;
|
|
|
|
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
|
|
rx_ring = &(adapter->rx_ring[r_idx]);
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
|
|
ixgbe_update_rx_dca(adapter, rx_ring);
|
|
#endif
|
|
|
|
ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
|
|
|
|
/* If all Rx work done, exit the polling mode */
|
|
if (work_done < budget) {
|
|
napi_complete(napi);
|
|
if (adapter->itr_setting & 1)
|
|
ixgbe_set_itr_msix(q_vector);
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
ixgbe_irq_enable_queues(adapter,
|
|
((u64)1 << q_vector->v_idx));
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clean_rxtx_many - msix (aka one shot) rx clean routine
|
|
* @napi: napi struct with our devices info in it
|
|
* @budget: amount of work driver is allowed to do this pass, in packets
|
|
*
|
|
* This function will clean more than one rx queue associated with a
|
|
* q_vector.
|
|
**/
|
|
static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
|
|
{
|
|
struct ixgbe_q_vector *q_vector =
|
|
container_of(napi, struct ixgbe_q_vector, napi);
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct ixgbe_ring *ring = NULL;
|
|
int work_done = 0, i;
|
|
long r_idx;
|
|
bool tx_clean_complete = true;
|
|
|
|
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
|
|
for (i = 0; i < q_vector->txr_count; i++) {
|
|
ring = &(adapter->tx_ring[r_idx]);
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
|
|
ixgbe_update_tx_dca(adapter, ring);
|
|
#endif
|
|
tx_clean_complete &= ixgbe_clean_tx_irq(q_vector, ring);
|
|
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
/* attempt to distribute budget to each queue fairly, but don't allow
|
|
* the budget to go below 1 because we'll exit polling */
|
|
budget /= (q_vector->rxr_count ?: 1);
|
|
budget = max(budget, 1);
|
|
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
|
|
for (i = 0; i < q_vector->rxr_count; i++) {
|
|
ring = &(adapter->rx_ring[r_idx]);
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
|
|
ixgbe_update_rx_dca(adapter, ring);
|
|
#endif
|
|
ixgbe_clean_rx_irq(q_vector, ring, &work_done, budget);
|
|
r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
|
|
r_idx + 1);
|
|
}
|
|
|
|
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
|
|
ring = &(adapter->rx_ring[r_idx]);
|
|
/* If all Rx work done, exit the polling mode */
|
|
if (work_done < budget) {
|
|
napi_complete(napi);
|
|
if (adapter->itr_setting & 1)
|
|
ixgbe_set_itr_msix(q_vector);
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
ixgbe_irq_enable_queues(adapter,
|
|
((u64)1 << q_vector->v_idx));
|
|
return 0;
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clean_txonly - msix (aka one shot) tx clean routine
|
|
* @napi: napi struct with our devices info in it
|
|
* @budget: amount of work driver is allowed to do this pass, in packets
|
|
*
|
|
* This function is optimized for cleaning one queue only on a single
|
|
* q_vector!!!
|
|
**/
|
|
static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
|
|
{
|
|
struct ixgbe_q_vector *q_vector =
|
|
container_of(napi, struct ixgbe_q_vector, napi);
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
struct ixgbe_ring *tx_ring = NULL;
|
|
int work_done = 0;
|
|
long r_idx;
|
|
|
|
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
|
|
tx_ring = &(adapter->tx_ring[r_idx]);
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
|
|
ixgbe_update_tx_dca(adapter, tx_ring);
|
|
#endif
|
|
|
|
if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
|
|
work_done = budget;
|
|
|
|
/* If all Rx work done, exit the polling mode */
|
|
if (work_done < budget) {
|
|
napi_complete(napi);
|
|
if (adapter->itr_setting & 1)
|
|
ixgbe_set_itr_msix(q_vector);
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
|
|
int r_idx)
|
|
{
|
|
struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
|
|
|
|
set_bit(r_idx, q_vector->rxr_idx);
|
|
q_vector->rxr_count++;
|
|
}
|
|
|
|
static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
|
|
int t_idx)
|
|
{
|
|
struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
|
|
|
|
set_bit(t_idx, q_vector->txr_idx);
|
|
q_vector->txr_count++;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_map_rings_to_vectors - Maps descriptor rings to vectors
|
|
* @adapter: board private structure to initialize
|
|
* @vectors: allotted vector count for descriptor rings
|
|
*
|
|
* This function maps descriptor rings to the queue-specific vectors
|
|
* we were allotted through the MSI-X enabling code. Ideally, we'd have
|
|
* one vector per ring/queue, but on a constrained vector budget, we
|
|
* group the rings as "efficiently" as possible. You would add new
|
|
* mapping configurations in here.
|
|
**/
|
|
static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter,
|
|
int vectors)
|
|
{
|
|
int v_start = 0;
|
|
int rxr_idx = 0, txr_idx = 0;
|
|
int rxr_remaining = adapter->num_rx_queues;
|
|
int txr_remaining = adapter->num_tx_queues;
|
|
int i, j;
|
|
int rqpv, tqpv;
|
|
int err = 0;
|
|
|
|
/* No mapping required if MSI-X is disabled. */
|
|
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
|
|
goto out;
|
|
|
|
/*
|
|
* The ideal configuration...
|
|
* We have enough vectors to map one per queue.
|
|
*/
|
|
if (vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
|
|
for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++)
|
|
map_vector_to_rxq(adapter, v_start, rxr_idx);
|
|
|
|
for (; txr_idx < txr_remaining; v_start++, txr_idx++)
|
|
map_vector_to_txq(adapter, v_start, txr_idx);
|
|
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* If we don't have enough vectors for a 1-to-1
|
|
* mapping, we'll have to group them so there are
|
|
* multiple queues per vector.
|
|
*/
|
|
/* Re-adjusting *qpv takes care of the remainder. */
|
|
for (i = v_start; i < vectors; i++) {
|
|
rqpv = DIV_ROUND_UP(rxr_remaining, vectors - i);
|
|
for (j = 0; j < rqpv; j++) {
|
|
map_vector_to_rxq(adapter, i, rxr_idx);
|
|
rxr_idx++;
|
|
rxr_remaining--;
|
|
}
|
|
}
|
|
for (i = v_start; i < vectors; i++) {
|
|
tqpv = DIV_ROUND_UP(txr_remaining, vectors - i);
|
|
for (j = 0; j < tqpv; j++) {
|
|
map_vector_to_txq(adapter, i, txr_idx);
|
|
txr_idx++;
|
|
txr_remaining--;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_request_msix_irqs - Initialize MSI-X interrupts
|
|
* @adapter: board private structure
|
|
*
|
|
* ixgbe_request_msix_irqs allocates MSI-X vectors and requests
|
|
* interrupts from the kernel.
|
|
**/
|
|
static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
irqreturn_t (*handler)(int, void *);
|
|
int i, vector, q_vectors, err;
|
|
int ri=0, ti=0;
|
|
|
|
/* Decrement for Other and TCP Timer vectors */
|
|
q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
|
|
|
|
/* Map the Tx/Rx rings to the vectors we were allotted. */
|
|
err = ixgbe_map_rings_to_vectors(adapter, q_vectors);
|
|
if (err)
|
|
goto out;
|
|
|
|
#define SET_HANDLER(_v) ((!(_v)->rxr_count) ? &ixgbe_msix_clean_tx : \
|
|
(!(_v)->txr_count) ? &ixgbe_msix_clean_rx : \
|
|
&ixgbe_msix_clean_many)
|
|
for (vector = 0; vector < q_vectors; vector++) {
|
|
handler = SET_HANDLER(adapter->q_vector[vector]);
|
|
|
|
if(handler == &ixgbe_msix_clean_rx) {
|
|
sprintf(adapter->name[vector], "%s-%s-%d",
|
|
netdev->name, "rx", ri++);
|
|
}
|
|
else if(handler == &ixgbe_msix_clean_tx) {
|
|
sprintf(adapter->name[vector], "%s-%s-%d",
|
|
netdev->name, "tx", ti++);
|
|
}
|
|
else
|
|
sprintf(adapter->name[vector], "%s-%s-%d",
|
|
netdev->name, "TxRx", vector);
|
|
|
|
err = request_irq(adapter->msix_entries[vector].vector,
|
|
handler, 0, adapter->name[vector],
|
|
adapter->q_vector[vector]);
|
|
if (err) {
|
|
DPRINTK(PROBE, ERR,
|
|
"request_irq failed for MSIX interrupt "
|
|
"Error: %d\n", err);
|
|
goto free_queue_irqs;
|
|
}
|
|
}
|
|
|
|
sprintf(adapter->name[vector], "%s:lsc", netdev->name);
|
|
err = request_irq(adapter->msix_entries[vector].vector,
|
|
&ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
|
|
if (err) {
|
|
DPRINTK(PROBE, ERR,
|
|
"request_irq for msix_lsc failed: %d\n", err);
|
|
goto free_queue_irqs;
|
|
}
|
|
|
|
return 0;
|
|
|
|
free_queue_irqs:
|
|
for (i = vector - 1; i >= 0; i--)
|
|
free_irq(adapter->msix_entries[--vector].vector,
|
|
adapter->q_vector[i]);
|
|
adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
|
|
pci_disable_msix(adapter->pdev);
|
|
kfree(adapter->msix_entries);
|
|
adapter->msix_entries = NULL;
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
|
|
u8 current_itr;
|
|
u32 new_itr = q_vector->eitr;
|
|
struct ixgbe_ring *rx_ring = &adapter->rx_ring[0];
|
|
struct ixgbe_ring *tx_ring = &adapter->tx_ring[0];
|
|
|
|
q_vector->tx_itr = ixgbe_update_itr(adapter, new_itr,
|
|
q_vector->tx_itr,
|
|
tx_ring->total_packets,
|
|
tx_ring->total_bytes);
|
|
q_vector->rx_itr = ixgbe_update_itr(adapter, new_itr,
|
|
q_vector->rx_itr,
|
|
rx_ring->total_packets,
|
|
rx_ring->total_bytes);
|
|
|
|
current_itr = max(q_vector->rx_itr, q_vector->tx_itr);
|
|
|
|
switch (current_itr) {
|
|
/* counts and packets in update_itr are dependent on these numbers */
|
|
case lowest_latency:
|
|
new_itr = 100000;
|
|
break;
|
|
case low_latency:
|
|
new_itr = 20000; /* aka hwitr = ~200 */
|
|
break;
|
|
case bulk_latency:
|
|
new_itr = 8000;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (new_itr != q_vector->eitr) {
|
|
/* do an exponential smoothing */
|
|
new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
|
|
|
|
/* save the algorithm value here, not the smoothed one */
|
|
q_vector->eitr = new_itr;
|
|
|
|
ixgbe_write_eitr(q_vector);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_irq_enable - Enable default interrupt generation settings
|
|
* @adapter: board private structure
|
|
**/
|
|
static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
|
|
{
|
|
u32 mask;
|
|
|
|
mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
|
|
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
|
|
mask |= IXGBE_EIMS_GPI_SDP1;
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
mask |= IXGBE_EIMS_ECC;
|
|
mask |= IXGBE_EIMS_GPI_SDP1;
|
|
mask |= IXGBE_EIMS_GPI_SDP2;
|
|
}
|
|
if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
|
|
adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
|
|
mask |= IXGBE_EIMS_FLOW_DIR;
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
|
|
ixgbe_irq_enable_queues(adapter, ~0);
|
|
IXGBE_WRITE_FLUSH(&adapter->hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_intr - legacy mode Interrupt Handler
|
|
* @irq: interrupt number
|
|
* @data: pointer to a network interface device structure
|
|
**/
|
|
static irqreturn_t ixgbe_intr(int irq, void *data)
|
|
{
|
|
struct net_device *netdev = data;
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
|
|
u32 eicr;
|
|
|
|
/*
|
|
* Workaround for silicon errata. Mask the interrupts
|
|
* before the read of EICR.
|
|
*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
|
|
|
|
/* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read
|
|
* therefore no explict interrupt disable is necessary */
|
|
eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
|
|
if (!eicr) {
|
|
/* shared interrupt alert!
|
|
* make sure interrupts are enabled because the read will
|
|
* have disabled interrupts due to EIAM */
|
|
ixgbe_irq_enable(adapter);
|
|
return IRQ_NONE; /* Not our interrupt */
|
|
}
|
|
|
|
if (eicr & IXGBE_EICR_LSC)
|
|
ixgbe_check_lsc(adapter);
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB)
|
|
ixgbe_check_sfp_event(adapter, eicr);
|
|
|
|
ixgbe_check_fan_failure(adapter, eicr);
|
|
|
|
if (napi_schedule_prep(&(q_vector->napi))) {
|
|
adapter->tx_ring[0].total_packets = 0;
|
|
adapter->tx_ring[0].total_bytes = 0;
|
|
adapter->rx_ring[0].total_packets = 0;
|
|
adapter->rx_ring[0].total_bytes = 0;
|
|
/* would disable interrupts here but EIAM disabled it */
|
|
__napi_schedule(&(q_vector->napi));
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
|
|
|
|
for (i = 0; i < q_vectors; i++) {
|
|
struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
|
|
bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES);
|
|
bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES);
|
|
q_vector->rxr_count = 0;
|
|
q_vector->txr_count = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_request_irq - initialize interrupts
|
|
* @adapter: board private structure
|
|
*
|
|
* Attempts to configure interrupts using the best available
|
|
* capabilities of the hardware and kernel.
|
|
**/
|
|
static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
int err;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
|
|
err = ixgbe_request_msix_irqs(adapter);
|
|
} else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
|
|
err = request_irq(adapter->pdev->irq, &ixgbe_intr, 0,
|
|
netdev->name, netdev);
|
|
} else {
|
|
err = request_irq(adapter->pdev->irq, &ixgbe_intr, IRQF_SHARED,
|
|
netdev->name, netdev);
|
|
}
|
|
|
|
if (err)
|
|
DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
|
|
int i, q_vectors;
|
|
|
|
q_vectors = adapter->num_msix_vectors;
|
|
|
|
i = q_vectors - 1;
|
|
free_irq(adapter->msix_entries[i].vector, netdev);
|
|
|
|
i--;
|
|
for (; i >= 0; i--) {
|
|
free_irq(adapter->msix_entries[i].vector,
|
|
adapter->q_vector[i]);
|
|
}
|
|
|
|
ixgbe_reset_q_vectors(adapter);
|
|
} else {
|
|
free_irq(adapter->pdev->irq, netdev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_irq_disable - Mask off interrupt generation on the NIC
|
|
* @adapter: board private structure
|
|
**/
|
|
static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
|
|
{
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
|
|
} else {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
|
|
}
|
|
IXGBE_WRITE_FLUSH(&adapter->hw);
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
|
|
int i;
|
|
for (i = 0; i < adapter->num_msix_vectors; i++)
|
|
synchronize_irq(adapter->msix_entries[i].vector);
|
|
} else {
|
|
synchronize_irq(adapter->pdev->irq);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
|
|
*
|
|
**/
|
|
static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
|
|
EITR_INTS_PER_SEC_TO_REG(adapter->eitr_param));
|
|
|
|
ixgbe_set_ivar(adapter, 0, 0, 0);
|
|
ixgbe_set_ivar(adapter, 1, 0, 0);
|
|
|
|
map_vector_to_rxq(adapter, 0, 0);
|
|
map_vector_to_txq(adapter, 0, 0);
|
|
|
|
DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n");
|
|
}
|
|
|
|
/**
|
|
* ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset
|
|
* @adapter: board private structure
|
|
*
|
|
* Configure the Tx unit of the MAC after a reset.
|
|
**/
|
|
static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
|
|
{
|
|
u64 tdba;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 i, j, tdlen, txctrl;
|
|
|
|
/* Setup the HW Tx Head and Tail descriptor pointers */
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
struct ixgbe_ring *ring = &adapter->tx_ring[i];
|
|
j = ring->reg_idx;
|
|
tdba = ring->dma;
|
|
tdlen = ring->count * sizeof(union ixgbe_adv_tx_desc);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAL(j),
|
|
(tdba & DMA_BIT_MASK(32)));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAH(j), (tdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDLEN(j), tdlen);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDH(j), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0);
|
|
adapter->tx_ring[i].head = IXGBE_TDH(j);
|
|
adapter->tx_ring[i].tail = IXGBE_TDT(j);
|
|
/* Disable Tx Head Writeback RO bit, since this hoses
|
|
* bookkeeping if things aren't delivered in order.
|
|
*/
|
|
txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
|
|
txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
|
|
}
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
/* We enable 8 traffic classes, DCB only */
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
|
|
IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA |
|
|
IXGBE_MTQC_8TC_8TQ));
|
|
}
|
|
}
|
|
|
|
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
|
|
|
|
static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *rx_ring)
|
|
{
|
|
u32 srrctl;
|
|
int index;
|
|
struct ixgbe_ring_feature *feature = adapter->ring_feature;
|
|
|
|
index = rx_ring->reg_idx;
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
unsigned long mask;
|
|
mask = (unsigned long) feature[RING_F_RSS].mask;
|
|
index = index & mask;
|
|
}
|
|
srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index));
|
|
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
|
|
|
|
srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
|
|
IXGBE_SRRCTL_BSIZEHDR_MASK;
|
|
|
|
if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
|
|
#if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
|
|
srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
#else
|
|
srrctl |= (PAGE_SIZE / 2) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
#endif
|
|
srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
|
|
} else {
|
|
srrctl |= ALIGN(rx_ring->rx_buf_len, 1024) >>
|
|
IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl);
|
|
}
|
|
|
|
static u32 ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
|
|
{
|
|
u32 mrqc = 0;
|
|
int mask;
|
|
|
|
if (!(adapter->hw.mac.type == ixgbe_mac_82599EB))
|
|
return mrqc;
|
|
|
|
mask = adapter->flags & (IXGBE_FLAG_RSS_ENABLED
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
| IXGBE_FLAG_DCB_ENABLED
|
|
#endif
|
|
);
|
|
|
|
switch (mask) {
|
|
case (IXGBE_FLAG_RSS_ENABLED):
|
|
mrqc = IXGBE_MRQC_RSSEN;
|
|
break;
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
case (IXGBE_FLAG_DCB_ENABLED):
|
|
mrqc = IXGBE_MRQC_RT8TCEN;
|
|
break;
|
|
#endif /* CONFIG_IXGBE_DCB */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return mrqc;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
|
|
* @adapter: board private structure
|
|
*
|
|
* Configure the Rx unit of the MAC after a reset.
|
|
**/
|
|
static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
|
|
{
|
|
u64 rdba;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ixgbe_ring *rx_ring;
|
|
struct net_device *netdev = adapter->netdev;
|
|
int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
|
|
int i, j;
|
|
u32 rdlen, rxctrl, rxcsum;
|
|
static const u32 seed[10] = { 0xE291D73D, 0x1805EC6C, 0x2A94B30D,
|
|
0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE,
|
|
0x6A3E67EA, 0x14364D17, 0x3BED200D};
|
|
u32 fctrl, hlreg0;
|
|
u32 reta = 0, mrqc = 0;
|
|
u32 rdrxctl;
|
|
u32 rscctrl;
|
|
int rx_buf_len;
|
|
|
|
/* Decide whether to use packet split mode or not */
|
|
adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
|
|
|
|
/* Set the RX buffer length according to the mode */
|
|
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
|
|
rx_buf_len = IXGBE_RX_HDR_SIZE;
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
/* PSRTYPE must be initialized in 82599 */
|
|
u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
|
|
IXGBE_PSRTYPE_UDPHDR |
|
|
IXGBE_PSRTYPE_IPV4HDR |
|
|
IXGBE_PSRTYPE_IPV6HDR |
|
|
IXGBE_PSRTYPE_L2HDR;
|
|
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
|
|
}
|
|
} else {
|
|
if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
|
|
(netdev->mtu <= ETH_DATA_LEN))
|
|
rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
|
|
else
|
|
rx_buf_len = ALIGN(max_frame, 1024);
|
|
}
|
|
|
|
fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
fctrl |= IXGBE_FCTRL_BAM;
|
|
fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */
|
|
fctrl |= IXGBE_FCTRL_PMCF;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl);
|
|
|
|
hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
if (adapter->netdev->mtu <= ETH_DATA_LEN)
|
|
hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
|
|
else
|
|
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
|
|
#ifdef IXGBE_FCOE
|
|
if (netdev->features & NETIF_F_FCOE_MTU)
|
|
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
|
|
#endif
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
|
|
|
|
rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
|
|
/* disable receives while setting up the descriptors */
|
|
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
|
|
|
|
/*
|
|
* Setup the HW Rx Head and Tail Descriptor Pointers and
|
|
* the Base and Length of the Rx Descriptor Ring
|
|
*/
|
|
for (i = 0; i < adapter->num_rx_queues; i++) {
|
|
rx_ring = &adapter->rx_ring[i];
|
|
rdba = rx_ring->dma;
|
|
j = rx_ring->reg_idx;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j), (rdba & DMA_BIT_MASK(32)));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAH(j), (rdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDLEN(j), rdlen);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDH(j), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(j), 0);
|
|
rx_ring->head = IXGBE_RDH(j);
|
|
rx_ring->tail = IXGBE_RDT(j);
|
|
rx_ring->rx_buf_len = rx_buf_len;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
|
|
rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED;
|
|
|
|
#ifdef IXGBE_FCOE
|
|
if (netdev->features & NETIF_F_FCOE_MTU) {
|
|
struct ixgbe_ring_feature *f;
|
|
f = &adapter->ring_feature[RING_F_FCOE];
|
|
if ((i >= f->mask) && (i < f->mask + f->indices)) {
|
|
rx_ring->flags &= ~IXGBE_RING_RX_PS_ENABLED;
|
|
if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE)
|
|
rx_ring->rx_buf_len =
|
|
IXGBE_FCOE_JUMBO_FRAME_SIZE;
|
|
}
|
|
}
|
|
|
|
#endif /* IXGBE_FCOE */
|
|
ixgbe_configure_srrctl(adapter, rx_ring);
|
|
}
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
/*
|
|
* For VMDq support of different descriptor types or
|
|
* buffer sizes through the use of multiple SRRCTL
|
|
* registers, RDRXCTL.MVMEN must be set to 1
|
|
*
|
|
* also, the manual doesn't mention it clearly but DCA hints
|
|
* will only use queue 0's tags unless this bit is set. Side
|
|
* effects of setting this bit are only that SRRCTL must be
|
|
* fully programmed [0..15]
|
|
*/
|
|
rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
|
|
rdrxctl |= IXGBE_RDRXCTL_MVMEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
|
|
}
|
|
|
|
/* Program MRQC for the distribution of queues */
|
|
mrqc = ixgbe_setup_mrqc(adapter);
|
|
|
|
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
|
|
/* Fill out redirection table */
|
|
for (i = 0, j = 0; i < 128; i++, j++) {
|
|
if (j == adapter->ring_feature[RING_F_RSS].indices)
|
|
j = 0;
|
|
/* reta = 4-byte sliding window of
|
|
* 0x00..(indices-1)(indices-1)00..etc. */
|
|
reta = (reta << 8) | (j * 0x11);
|
|
if ((i & 3) == 3)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
|
|
}
|
|
|
|
/* Fill out hash function seeds */
|
|
for (i = 0; i < 10; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), seed[i]);
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
mrqc |= IXGBE_MRQC_RSSEN;
|
|
/* Perform hash on these packet types */
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4_UDP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_UDP;
|
|
}
|
|
IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
|
|
|
|
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
|
|
|
|
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED ||
|
|
adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED) {
|
|
/* Disable indicating checksum in descriptor, enables
|
|
* RSS hash */
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
}
|
|
if (!(rxcsum & IXGBE_RXCSUM_PCSD)) {
|
|
/* Enable IPv4 payload checksum for UDP fragments
|
|
* if PCSD is not set */
|
|
rxcsum |= IXGBE_RXCSUM_IPPCSE;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
|
|
rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP;
|
|
rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
|
|
}
|
|
|
|
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
|
|
/* Enable 82599 HW-RSC */
|
|
for (i = 0; i < adapter->num_rx_queues; i++) {
|
|
rx_ring = &adapter->rx_ring[i];
|
|
j = rx_ring->reg_idx;
|
|
rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
|
|
rscctrl |= IXGBE_RSCCTL_RSCEN;
|
|
/*
|
|
* we must limit the number of descriptors so that the
|
|
* total size of max desc * buf_len is not greater
|
|
* than 65535
|
|
*/
|
|
if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
|
|
#if (MAX_SKB_FRAGS > 16)
|
|
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
|
|
#elif (MAX_SKB_FRAGS > 8)
|
|
rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
|
|
#elif (MAX_SKB_FRAGS > 4)
|
|
rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
|
|
#else
|
|
rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
|
|
#endif
|
|
} else {
|
|
if (rx_buf_len < IXGBE_RXBUFFER_4096)
|
|
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
|
|
else if (rx_buf_len < IXGBE_RXBUFFER_8192)
|
|
rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
|
|
else
|
|
rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
|
|
}
|
|
IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
|
|
}
|
|
/* Disable RSC for ACK packets */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
|
|
(IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
|
|
}
|
|
}
|
|
|
|
static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
/* add VID to filter table */
|
|
hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true);
|
|
}
|
|
|
|
static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
ixgbe_irq_disable(adapter);
|
|
|
|
vlan_group_set_device(adapter->vlgrp, vid, NULL);
|
|
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
ixgbe_irq_enable(adapter);
|
|
|
|
/* remove VID from filter table */
|
|
hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
|
|
}
|
|
|
|
static void ixgbe_vlan_rx_register(struct net_device *netdev,
|
|
struct vlan_group *grp)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
u32 ctrl;
|
|
int i, j;
|
|
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
ixgbe_irq_disable(adapter);
|
|
adapter->vlgrp = grp;
|
|
|
|
/*
|
|
* For a DCB driver, always enable VLAN tag stripping so we can
|
|
* still receive traffic from a DCB-enabled host even if we're
|
|
* not in DCB mode.
|
|
*/
|
|
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
ctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE;
|
|
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
|
|
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
ctrl |= IXGBE_VLNCTRL_VFE;
|
|
/* enable VLAN tag insert/strip */
|
|
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
|
|
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
|
|
for (i = 0; i < adapter->num_rx_queues; i++) {
|
|
j = adapter->rx_ring[i].reg_idx;
|
|
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(j));
|
|
ctrl |= IXGBE_RXDCTL_VME;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(j), ctrl);
|
|
}
|
|
}
|
|
ixgbe_vlan_rx_add_vid(netdev, 0);
|
|
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
ixgbe_irq_enable(adapter);
|
|
}
|
|
|
|
static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
|
|
{
|
|
ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
|
|
|
|
if (adapter->vlgrp) {
|
|
u16 vid;
|
|
for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
|
|
if (!vlan_group_get_device(adapter->vlgrp, vid))
|
|
continue;
|
|
ixgbe_vlan_rx_add_vid(adapter->netdev, vid);
|
|
}
|
|
}
|
|
}
|
|
|
|
static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq)
|
|
{
|
|
struct dev_mc_list *mc_ptr;
|
|
u8 *addr = *mc_addr_ptr;
|
|
*vmdq = 0;
|
|
|
|
mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]);
|
|
if (mc_ptr->next)
|
|
*mc_addr_ptr = mc_ptr->next->dmi_addr;
|
|
else
|
|
*mc_addr_ptr = NULL;
|
|
|
|
return addr;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
|
|
* @netdev: network interface device structure
|
|
*
|
|
* The set_rx_method entry point is called whenever the unicast/multicast
|
|
* address list or the network interface flags are updated. This routine is
|
|
* responsible for configuring the hardware for proper unicast, multicast and
|
|
* promiscuous mode.
|
|
**/
|
|
static void ixgbe_set_rx_mode(struct net_device *netdev)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 fctrl, vlnctrl;
|
|
u8 *addr_list = NULL;
|
|
int addr_count = 0;
|
|
|
|
/* Check for Promiscuous and All Multicast modes */
|
|
|
|
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
|
|
|
|
if (netdev->flags & IFF_PROMISC) {
|
|
hw->addr_ctrl.user_set_promisc = 1;
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
vlnctrl &= ~IXGBE_VLNCTRL_VFE;
|
|
} else {
|
|
if (netdev->flags & IFF_ALLMULTI) {
|
|
fctrl |= IXGBE_FCTRL_MPE;
|
|
fctrl &= ~IXGBE_FCTRL_UPE;
|
|
} else {
|
|
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
}
|
|
vlnctrl |= IXGBE_VLNCTRL_VFE;
|
|
hw->addr_ctrl.user_set_promisc = 0;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
|
|
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
|
|
|
|
/* reprogram secondary unicast list */
|
|
hw->mac.ops.update_uc_addr_list(hw, &netdev->uc.list);
|
|
|
|
/* reprogram multicast list */
|
|
addr_count = netdev->mc_count;
|
|
if (addr_count)
|
|
addr_list = netdev->mc_list->dmi_addr;
|
|
hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count,
|
|
ixgbe_addr_list_itr);
|
|
}
|
|
|
|
static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
|
|
{
|
|
int q_idx;
|
|
struct ixgbe_q_vector *q_vector;
|
|
int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
|
|
|
|
/* legacy and MSI only use one vector */
|
|
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
|
|
q_vectors = 1;
|
|
|
|
for (q_idx = 0; q_idx < q_vectors; q_idx++) {
|
|
struct napi_struct *napi;
|
|
q_vector = adapter->q_vector[q_idx];
|
|
napi = &q_vector->napi;
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
|
|
if (!q_vector->rxr_count || !q_vector->txr_count) {
|
|
if (q_vector->txr_count == 1)
|
|
napi->poll = &ixgbe_clean_txonly;
|
|
else if (q_vector->rxr_count == 1)
|
|
napi->poll = &ixgbe_clean_rxonly;
|
|
}
|
|
}
|
|
|
|
napi_enable(napi);
|
|
}
|
|
}
|
|
|
|
static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
|
|
{
|
|
int q_idx;
|
|
struct ixgbe_q_vector *q_vector;
|
|
int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
|
|
|
|
/* legacy and MSI only use one vector */
|
|
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
|
|
q_vectors = 1;
|
|
|
|
for (q_idx = 0; q_idx < q_vectors; q_idx++) {
|
|
q_vector = adapter->q_vector[q_idx];
|
|
napi_disable(&q_vector->napi);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
/*
|
|
* ixgbe_configure_dcb - Configure DCB hardware
|
|
* @adapter: ixgbe adapter struct
|
|
*
|
|
* This is called by the driver on open to configure the DCB hardware.
|
|
* This is also called by the gennetlink interface when reconfiguring
|
|
* the DCB state.
|
|
*/
|
|
static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 txdctl, vlnctrl;
|
|
int i, j;
|
|
|
|
ixgbe_dcb_check_config(&adapter->dcb_cfg);
|
|
ixgbe_dcb_calculate_tc_credits(&adapter->dcb_cfg, DCB_TX_CONFIG);
|
|
ixgbe_dcb_calculate_tc_credits(&adapter->dcb_cfg, DCB_RX_CONFIG);
|
|
|
|
/* reconfigure the hardware */
|
|
ixgbe_dcb_hw_config(&adapter->hw, &adapter->dcb_cfg);
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
j = adapter->tx_ring[i].reg_idx;
|
|
txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
|
|
/* PThresh workaround for Tx hang with DFP enabled. */
|
|
txdctl |= 32;
|
|
IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl);
|
|
}
|
|
/* Enable VLAN tag insert/strip */
|
|
vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
vlnctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE;
|
|
vlnctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
|
|
} else if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
vlnctrl |= IXGBE_VLNCTRL_VFE;
|
|
vlnctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
|
|
for (i = 0; i < adapter->num_rx_queues; i++) {
|
|
j = adapter->rx_ring[i].reg_idx;
|
|
vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
|
|
vlnctrl |= IXGBE_RXDCTL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl);
|
|
}
|
|
}
|
|
hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
|
|
}
|
|
|
|
#endif
|
|
static void ixgbe_configure(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int i;
|
|
|
|
ixgbe_set_rx_mode(netdev);
|
|
|
|
ixgbe_restore_vlan(adapter);
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
|
|
netif_set_gso_max_size(netdev, 32768);
|
|
ixgbe_configure_dcb(adapter);
|
|
} else {
|
|
netif_set_gso_max_size(netdev, 65536);
|
|
}
|
|
#else
|
|
netif_set_gso_max_size(netdev, 65536);
|
|
#endif
|
|
|
|
#ifdef IXGBE_FCOE
|
|
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
|
|
ixgbe_configure_fcoe(adapter);
|
|
|
|
#endif /* IXGBE_FCOE */
|
|
if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
|
|
for (i = 0; i < adapter->num_tx_queues; i++)
|
|
adapter->tx_ring[i].atr_sample_rate =
|
|
adapter->atr_sample_rate;
|
|
ixgbe_init_fdir_signature_82599(hw, adapter->fdir_pballoc);
|
|
} else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) {
|
|
ixgbe_init_fdir_perfect_82599(hw, adapter->fdir_pballoc);
|
|
}
|
|
|
|
ixgbe_configure_tx(adapter);
|
|
ixgbe_configure_rx(adapter);
|
|
for (i = 0; i < adapter->num_rx_queues; i++)
|
|
ixgbe_alloc_rx_buffers(adapter, &adapter->rx_ring[i],
|
|
(adapter->rx_ring[i].count - 1));
|
|
}
|
|
|
|
static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw)
|
|
{
|
|
switch (hw->phy.type) {
|
|
case ixgbe_phy_sfp_avago:
|
|
case ixgbe_phy_sfp_ftl:
|
|
case ixgbe_phy_sfp_intel:
|
|
case ixgbe_phy_sfp_unknown:
|
|
case ixgbe_phy_tw_tyco:
|
|
case ixgbe_phy_tw_unknown:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_sfp_link_config - set up SFP+ link
|
|
* @adapter: pointer to private adapter struct
|
|
**/
|
|
static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
if (hw->phy.multispeed_fiber) {
|
|
/*
|
|
* In multispeed fiber setups, the device may not have
|
|
* had a physical connection when the driver loaded.
|
|
* If that's the case, the initial link configuration
|
|
* couldn't get the MAC into 10G or 1G mode, so we'll
|
|
* never have a link status change interrupt fire.
|
|
* We need to try and force an autonegotiation
|
|
* session, then bring up link.
|
|
*/
|
|
hw->mac.ops.setup_sfp(hw);
|
|
if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
|
|
schedule_work(&adapter->multispeed_fiber_task);
|
|
} else {
|
|
/*
|
|
* Direct Attach Cu and non-multispeed fiber modules
|
|
* still need to be configured properly prior to
|
|
* attempting link.
|
|
*/
|
|
if (!(adapter->flags & IXGBE_FLAG_IN_SFP_MOD_TASK))
|
|
schedule_work(&adapter->sfp_config_module_task);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_non_sfp_link_config - set up non-SFP+ link
|
|
* @hw: pointer to private hardware struct
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
|
|
{
|
|
u32 autoneg;
|
|
bool negotiation, link_up = false;
|
|
u32 ret = IXGBE_ERR_LINK_SETUP;
|
|
|
|
if (hw->mac.ops.check_link)
|
|
ret = hw->mac.ops.check_link(hw, &autoneg, &link_up, false);
|
|
|
|
if (ret)
|
|
goto link_cfg_out;
|
|
|
|
if (hw->mac.ops.get_link_capabilities)
|
|
ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
|
|
if (ret)
|
|
goto link_cfg_out;
|
|
|
|
if (hw->mac.ops.setup_link)
|
|
ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up);
|
|
link_cfg_out:
|
|
return ret;
|
|
}
|
|
|
|
#define IXGBE_MAX_RX_DESC_POLL 10
|
|
static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
|
|
int rxr)
|
|
{
|
|
int j = adapter->rx_ring[rxr].reg_idx;
|
|
int k;
|
|
|
|
for (k = 0; k < IXGBE_MAX_RX_DESC_POLL; k++) {
|
|
if (IXGBE_READ_REG(&adapter->hw,
|
|
IXGBE_RXDCTL(j)) & IXGBE_RXDCTL_ENABLE)
|
|
break;
|
|
else
|
|
msleep(1);
|
|
}
|
|
if (k >= IXGBE_MAX_RX_DESC_POLL) {
|
|
DPRINTK(DRV, ERR, "RXDCTL.ENABLE on Rx queue %d "
|
|
"not set within the polling period\n", rxr);
|
|
}
|
|
ixgbe_release_rx_desc(&adapter->hw, &adapter->rx_ring[rxr],
|
|
(adapter->rx_ring[rxr].count - 1));
|
|
}
|
|
|
|
static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int i, j = 0;
|
|
int num_rx_rings = adapter->num_rx_queues;
|
|
int err;
|
|
int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
|
|
u32 txdctl, rxdctl, mhadd;
|
|
u32 dmatxctl;
|
|
u32 gpie;
|
|
|
|
ixgbe_get_hw_control(adapter);
|
|
|
|
if ((adapter->flags & IXGBE_FLAG_MSIX_ENABLED) ||
|
|
(adapter->flags & IXGBE_FLAG_MSI_ENABLED)) {
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
|
|
gpie = (IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_EIAME |
|
|
IXGBE_GPIE_PBA_SUPPORT | IXGBE_GPIE_OCD);
|
|
} else {
|
|
/* MSI only */
|
|
gpie = 0;
|
|
}
|
|
/* XXX: to interrupt immediately for EICS writes, enable this */
|
|
/* gpie |= IXGBE_GPIE_EIMEN; */
|
|
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
|
|
}
|
|
|
|
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
|
|
/* legacy interrupts, use EIAM to auto-mask when reading EICR,
|
|
* specifically only auto mask tx and rx interrupts */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
|
|
}
|
|
|
|
/* Enable fan failure interrupt if media type is copper */
|
|
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
|
|
gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
|
|
gpie |= IXGBE_SDP1_GPIEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
|
|
}
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
|
|
gpie |= IXGBE_SDP1_GPIEN;
|
|
gpie |= IXGBE_SDP2_GPIEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
|
|
}
|
|
|
|
#ifdef IXGBE_FCOE
|
|
/* adjust max frame to be able to do baby jumbo for FCoE */
|
|
if ((netdev->features & NETIF_F_FCOE_MTU) &&
|
|
(max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE))
|
|
max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE;
|
|
|
|
#endif /* IXGBE_FCOE */
|
|
mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
|
|
if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) {
|
|
mhadd &= ~IXGBE_MHADD_MFS_MASK;
|
|
mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd);
|
|
}
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
j = adapter->tx_ring[i].reg_idx;
|
|
txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
|
|
/* enable WTHRESH=8 descriptors, to encourage burst writeback */
|
|
txdctl |= (8 << 16);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl);
|
|
}
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
/* DMATXCTL.EN must be set after all Tx queue config is done */
|
|
dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
|
|
dmatxctl |= IXGBE_DMATXCTL_TE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
|
|
}
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
j = adapter->tx_ring[i].reg_idx;
|
|
txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
|
|
txdctl |= IXGBE_TXDCTL_ENABLE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl);
|
|
}
|
|
|
|
for (i = 0; i < num_rx_rings; i++) {
|
|
j = adapter->rx_ring[i].reg_idx;
|
|
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
|
|
/* enable PTHRESH=32 descriptors (half the internal cache)
|
|
* and HTHRESH=0 descriptors (to minimize latency on fetch),
|
|
* this also removes a pesky rx_no_buffer_count increment */
|
|
rxdctl |= 0x0020;
|
|
rxdctl |= IXGBE_RXDCTL_ENABLE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), rxdctl);
|
|
if (hw->mac.type == ixgbe_mac_82599EB)
|
|
ixgbe_rx_desc_queue_enable(adapter, i);
|
|
}
|
|
/* enable all receives */
|
|
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
rxdctl |= (IXGBE_RXCTRL_DMBYPS | IXGBE_RXCTRL_RXEN);
|
|
else
|
|
rxdctl |= IXGBE_RXCTRL_RXEN;
|
|
hw->mac.ops.enable_rx_dma(hw, rxdctl);
|
|
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
|
|
ixgbe_configure_msix(adapter);
|
|
else
|
|
ixgbe_configure_msi_and_legacy(adapter);
|
|
|
|
clear_bit(__IXGBE_DOWN, &adapter->state);
|
|
ixgbe_napi_enable_all(adapter);
|
|
|
|
/* clear any pending interrupts, may auto mask */
|
|
IXGBE_READ_REG(hw, IXGBE_EICR);
|
|
|
|
ixgbe_irq_enable(adapter);
|
|
|
|
/*
|
|
* If this adapter has a fan, check to see if we had a failure
|
|
* before we enabled the interrupt.
|
|
*/
|
|
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
|
|
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
|
|
if (esdp & IXGBE_ESDP_SDP1)
|
|
DPRINTK(DRV, CRIT,
|
|
"Fan has stopped, replace the adapter\n");
|
|
}
|
|
|
|
/*
|
|
* For hot-pluggable SFP+ devices, a new SFP+ module may have
|
|
* arrived before interrupts were enabled but after probe. Such
|
|
* devices wouldn't have their type identified yet. We need to
|
|
* kick off the SFP+ module setup first, then try to bring up link.
|
|
* If we're not hot-pluggable SFP+, we just need to configure link
|
|
* and bring it up.
|
|
*/
|
|
if (hw->phy.type == ixgbe_phy_unknown) {
|
|
err = hw->phy.ops.identify(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
/*
|
|
* Take the device down and schedule the sfp tasklet
|
|
* which will unregister_netdev and log it.
|
|
*/
|
|
ixgbe_down(adapter);
|
|
schedule_work(&adapter->sfp_config_module_task);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
if (ixgbe_is_sfp(hw)) {
|
|
ixgbe_sfp_link_config(adapter);
|
|
} else {
|
|
err = ixgbe_non_sfp_link_config(hw);
|
|
if (err)
|
|
DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err);
|
|
}
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++)
|
|
set_bit(__IXGBE_FDIR_INIT_DONE,
|
|
&(adapter->tx_ring[i].reinit_state));
|
|
|
|
/* enable transmits */
|
|
netif_tx_start_all_queues(netdev);
|
|
|
|
/* bring the link up in the watchdog, this could race with our first
|
|
* link up interrupt but shouldn't be a problem */
|
|
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
|
|
adapter->link_check_timeout = jiffies;
|
|
mod_timer(&adapter->watchdog_timer, jiffies);
|
|
return 0;
|
|
}
|
|
|
|
void ixgbe_reinit_locked(struct ixgbe_adapter *adapter)
|
|
{
|
|
WARN_ON(in_interrupt());
|
|
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
|
|
msleep(1);
|
|
ixgbe_down(adapter);
|
|
ixgbe_up(adapter);
|
|
clear_bit(__IXGBE_RESETTING, &adapter->state);
|
|
}
|
|
|
|
int ixgbe_up(struct ixgbe_adapter *adapter)
|
|
{
|
|
/* hardware has been reset, we need to reload some things */
|
|
ixgbe_configure(adapter);
|
|
|
|
return ixgbe_up_complete(adapter);
|
|
}
|
|
|
|
void ixgbe_reset(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int err;
|
|
|
|
err = hw->mac.ops.init_hw(hw);
|
|
switch (err) {
|
|
case 0:
|
|
case IXGBE_ERR_SFP_NOT_PRESENT:
|
|
break;
|
|
case IXGBE_ERR_MASTER_REQUESTS_PENDING:
|
|
dev_err(&adapter->pdev->dev, "master disable timed out\n");
|
|
break;
|
|
case IXGBE_ERR_EEPROM_VERSION:
|
|
/* We are running on a pre-production device, log a warning */
|
|
dev_warn(&adapter->pdev->dev, "This device is a pre-production "
|
|
"adapter/LOM. Please be aware there may be issues "
|
|
"associated with your hardware. If you are "
|
|
"experiencing problems please contact your Intel or "
|
|
"hardware representative who provided you with this "
|
|
"hardware.\n");
|
|
break;
|
|
default:
|
|
dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
|
|
}
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clean_rx_ring - Free Rx Buffers per Queue
|
|
* @adapter: board private structure
|
|
* @rx_ring: ring to free buffers from
|
|
**/
|
|
static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *rx_ring)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
unsigned long size;
|
|
unsigned int i;
|
|
|
|
/* Free all the Rx ring sk_buffs */
|
|
|
|
for (i = 0; i < rx_ring->count; i++) {
|
|
struct ixgbe_rx_buffer *rx_buffer_info;
|
|
|
|
rx_buffer_info = &rx_ring->rx_buffer_info[i];
|
|
if (rx_buffer_info->dma) {
|
|
pci_unmap_single(pdev, rx_buffer_info->dma,
|
|
rx_ring->rx_buf_len,
|
|
PCI_DMA_FROMDEVICE);
|
|
rx_buffer_info->dma = 0;
|
|
}
|
|
if (rx_buffer_info->skb) {
|
|
struct sk_buff *skb = rx_buffer_info->skb;
|
|
rx_buffer_info->skb = NULL;
|
|
do {
|
|
struct sk_buff *this = skb;
|
|
skb = skb->prev;
|
|
dev_kfree_skb(this);
|
|
} while (skb);
|
|
}
|
|
if (!rx_buffer_info->page)
|
|
continue;
|
|
if (rx_buffer_info->page_dma) {
|
|
pci_unmap_page(pdev, rx_buffer_info->page_dma,
|
|
PAGE_SIZE / 2, PCI_DMA_FROMDEVICE);
|
|
rx_buffer_info->page_dma = 0;
|
|
}
|
|
put_page(rx_buffer_info->page);
|
|
rx_buffer_info->page = NULL;
|
|
rx_buffer_info->page_offset = 0;
|
|
}
|
|
|
|
size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
|
|
memset(rx_ring->rx_buffer_info, 0, size);
|
|
|
|
/* Zero out the descriptor ring */
|
|
memset(rx_ring->desc, 0, rx_ring->size);
|
|
|
|
rx_ring->next_to_clean = 0;
|
|
rx_ring->next_to_use = 0;
|
|
|
|
if (rx_ring->head)
|
|
writel(0, adapter->hw.hw_addr + rx_ring->head);
|
|
if (rx_ring->tail)
|
|
writel(0, adapter->hw.hw_addr + rx_ring->tail);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clean_tx_ring - Free Tx Buffers
|
|
* @adapter: board private structure
|
|
* @tx_ring: ring to be cleaned
|
|
**/
|
|
static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring)
|
|
{
|
|
struct ixgbe_tx_buffer *tx_buffer_info;
|
|
unsigned long size;
|
|
unsigned int i;
|
|
|
|
/* Free all the Tx ring sk_buffs */
|
|
|
|
for (i = 0; i < tx_ring->count; i++) {
|
|
tx_buffer_info = &tx_ring->tx_buffer_info[i];
|
|
ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
|
|
}
|
|
|
|
size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
|
|
memset(tx_ring->tx_buffer_info, 0, size);
|
|
|
|
/* Zero out the descriptor ring */
|
|
memset(tx_ring->desc, 0, tx_ring->size);
|
|
|
|
tx_ring->next_to_use = 0;
|
|
tx_ring->next_to_clean = 0;
|
|
|
|
if (tx_ring->head)
|
|
writel(0, adapter->hw.hw_addr + tx_ring->head);
|
|
if (tx_ring->tail)
|
|
writel(0, adapter->hw.hw_addr + tx_ring->tail);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues
|
|
* @adapter: board private structure
|
|
**/
|
|
static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < adapter->num_rx_queues; i++)
|
|
ixgbe_clean_rx_ring(adapter, &adapter->rx_ring[i]);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues
|
|
* @adapter: board private structure
|
|
**/
|
|
static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++)
|
|
ixgbe_clean_tx_ring(adapter, &adapter->tx_ring[i]);
|
|
}
|
|
|
|
void ixgbe_down(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 rxctrl;
|
|
u32 txdctl;
|
|
int i, j;
|
|
|
|
/* signal that we are down to the interrupt handler */
|
|
set_bit(__IXGBE_DOWN, &adapter->state);
|
|
|
|
/* disable receives */
|
|
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
|
|
|
|
netif_tx_disable(netdev);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
msleep(10);
|
|
|
|
netif_tx_stop_all_queues(netdev);
|
|
|
|
ixgbe_irq_disable(adapter);
|
|
|
|
ixgbe_napi_disable_all(adapter);
|
|
|
|
del_timer_sync(&adapter->watchdog_timer);
|
|
cancel_work_sync(&adapter->watchdog_task);
|
|
|
|
if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
|
|
adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
|
|
cancel_work_sync(&adapter->fdir_reinit_task);
|
|
|
|
/* disable transmits in the hardware now that interrupts are off */
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
j = adapter->tx_ring[i].reg_idx;
|
|
txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j),
|
|
(txdctl & ~IXGBE_TXDCTL_ENABLE));
|
|
}
|
|
/* Disable the Tx DMA engine on 82599 */
|
|
if (hw->mac.type == ixgbe_mac_82599EB)
|
|
IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL,
|
|
(IXGBE_READ_REG(hw, IXGBE_DMATXCTL) &
|
|
~IXGBE_DMATXCTL_TE));
|
|
|
|
netif_carrier_off(netdev);
|
|
|
|
if (!pci_channel_offline(adapter->pdev))
|
|
ixgbe_reset(adapter);
|
|
ixgbe_clean_all_tx_rings(adapter);
|
|
ixgbe_clean_all_rx_rings(adapter);
|
|
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
/* since we reset the hardware DCA settings were cleared */
|
|
ixgbe_setup_dca(adapter);
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* ixgbe_poll - NAPI Rx polling callback
|
|
* @napi: structure for representing this polling device
|
|
* @budget: how many packets driver is allowed to clean
|
|
*
|
|
* This function is used for legacy and MSI, NAPI mode
|
|
**/
|
|
static int ixgbe_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct ixgbe_q_vector *q_vector =
|
|
container_of(napi, struct ixgbe_q_vector, napi);
|
|
struct ixgbe_adapter *adapter = q_vector->adapter;
|
|
int tx_clean_complete, work_done = 0;
|
|
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
|
|
ixgbe_update_tx_dca(adapter, adapter->tx_ring);
|
|
ixgbe_update_rx_dca(adapter, adapter->rx_ring);
|
|
}
|
|
#endif
|
|
|
|
tx_clean_complete = ixgbe_clean_tx_irq(q_vector, adapter->tx_ring);
|
|
ixgbe_clean_rx_irq(q_vector, adapter->rx_ring, &work_done, budget);
|
|
|
|
if (!tx_clean_complete)
|
|
work_done = budget;
|
|
|
|
/* If budget not fully consumed, exit the polling mode */
|
|
if (work_done < budget) {
|
|
napi_complete(napi);
|
|
if (adapter->itr_setting & 1)
|
|
ixgbe_set_itr(adapter);
|
|
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
|
ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
|
|
}
|
|
return work_done;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_tx_timeout - Respond to a Tx Hang
|
|
* @netdev: network interface device structure
|
|
**/
|
|
static void ixgbe_tx_timeout(struct net_device *netdev)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
/* Do the reset outside of interrupt context */
|
|
schedule_work(&adapter->reset_task);
|
|
}
|
|
|
|
static void ixgbe_reset_task(struct work_struct *work)
|
|
{
|
|
struct ixgbe_adapter *adapter;
|
|
adapter = container_of(work, struct ixgbe_adapter, reset_task);
|
|
|
|
/* If we're already down or resetting, just bail */
|
|
if (test_bit(__IXGBE_DOWN, &adapter->state) ||
|
|
test_bit(__IXGBE_RESETTING, &adapter->state))
|
|
return;
|
|
|
|
adapter->tx_timeout_count++;
|
|
|
|
ixgbe_reinit_locked(adapter);
|
|
}
|
|
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
|
|
{
|
|
bool ret = false;
|
|
struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_DCB];
|
|
|
|
if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
|
|
return ret;
|
|
|
|
f->mask = 0x7 << 3;
|
|
adapter->num_rx_queues = f->indices;
|
|
adapter->num_tx_queues = f->indices;
|
|
ret = true;
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* ixgbe_set_rss_queues: Allocate queues for RSS
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try
|
|
* to allocate one Rx queue per CPU, and if available, one Tx queue per CPU.
|
|
*
|
|
**/
|
|
static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
|
|
{
|
|
bool ret = false;
|
|
struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_RSS];
|
|
|
|
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
|
|
f->mask = 0xF;
|
|
adapter->num_rx_queues = f->indices;
|
|
adapter->num_tx_queues = f->indices;
|
|
ret = true;
|
|
} else {
|
|
ret = false;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_fdir_queues: Allocate queues for Flow Director
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* Flow Director is an advanced Rx filter, attempting to get Rx flows back
|
|
* to the original CPU that initiated the Tx session. This runs in addition
|
|
* to RSS, so if a packet doesn't match an FDIR filter, we can still spread the
|
|
* Rx load across CPUs using RSS.
|
|
*
|
|
**/
|
|
static bool inline ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter)
|
|
{
|
|
bool ret = false;
|
|
struct ixgbe_ring_feature *f_fdir = &adapter->ring_feature[RING_F_FDIR];
|
|
|
|
f_fdir->indices = min((int)num_online_cpus(), f_fdir->indices);
|
|
f_fdir->mask = 0;
|
|
|
|
/* Flow Director must have RSS enabled */
|
|
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED &&
|
|
((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
|
|
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)))) {
|
|
adapter->num_tx_queues = f_fdir->indices;
|
|
adapter->num_rx_queues = f_fdir->indices;
|
|
ret = true;
|
|
} else {
|
|
adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
|
|
adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#ifdef IXGBE_FCOE
|
|
/**
|
|
* ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE)
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
|
|
* The ring feature mask is not used as a mask for FCoE, as it can take any 8
|
|
* rx queues out of the max number of rx queues, instead, it is used as the
|
|
* index of the first rx queue used by FCoE.
|
|
*
|
|
**/
|
|
static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
|
|
{
|
|
bool ret = false;
|
|
struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
|
|
|
|
f->indices = min((int)num_online_cpus(), f->indices);
|
|
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
|
|
DPRINTK(PROBE, INFO, "FCOE enabled with DCB \n");
|
|
ixgbe_set_dcb_queues(adapter);
|
|
}
|
|
#endif
|
|
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
|
|
DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
|
|
if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
|
|
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
|
|
ixgbe_set_fdir_queues(adapter);
|
|
else
|
|
ixgbe_set_rss_queues(adapter);
|
|
}
|
|
/* adding FCoE rx rings to the end */
|
|
f->mask = adapter->num_rx_queues;
|
|
adapter->num_rx_queues += f->indices;
|
|
if (adapter->num_tx_queues == 0)
|
|
adapter->num_tx_queues = f->indices;
|
|
|
|
ret = true;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif /* IXGBE_FCOE */
|
|
/*
|
|
* ixgbe_set_num_queues: Allocate queues for device, feature dependant
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* This is the top level queue allocation routine. The order here is very
|
|
* important, starting with the "most" number of features turned on at once,
|
|
* and ending with the smallest set of features. This way large combinations
|
|
* can be allocated if they're turned on, and smaller combinations are the
|
|
* fallthrough conditions.
|
|
*
|
|
**/
|
|
static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
|
|
{
|
|
#ifdef IXGBE_FCOE
|
|
if (ixgbe_set_fcoe_queues(adapter))
|
|
goto done;
|
|
|
|
#endif /* IXGBE_FCOE */
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
if (ixgbe_set_dcb_queues(adapter))
|
|
goto done;
|
|
|
|
#endif
|
|
if (ixgbe_set_fdir_queues(adapter))
|
|
goto done;
|
|
|
|
if (ixgbe_set_rss_queues(adapter))
|
|
goto done;
|
|
|
|
/* fallback to base case */
|
|
adapter->num_rx_queues = 1;
|
|
adapter->num_tx_queues = 1;
|
|
|
|
done:
|
|
/* Notify the stack of the (possibly) reduced Tx Queue count. */
|
|
adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
|
|
}
|
|
|
|
static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
|
|
int vectors)
|
|
{
|
|
int err, vector_threshold;
|
|
|
|
/* We'll want at least 3 (vector_threshold):
|
|
* 1) TxQ[0] Cleanup
|
|
* 2) RxQ[0] Cleanup
|
|
* 3) Other (Link Status Change, etc.)
|
|
* 4) TCP Timer (optional)
|
|
*/
|
|
vector_threshold = MIN_MSIX_COUNT;
|
|
|
|
/* The more we get, the more we will assign to Tx/Rx Cleanup
|
|
* for the separate queues...where Rx Cleanup >= Tx Cleanup.
|
|
* Right now, we simply care about how many we'll get; we'll
|
|
* set them up later while requesting irq's.
|
|
*/
|
|
while (vectors >= vector_threshold) {
|
|
err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
|
|
vectors);
|
|
if (!err) /* Success in acquiring all requested vectors. */
|
|
break;
|
|
else if (err < 0)
|
|
vectors = 0; /* Nasty failure, quit now */
|
|
else /* err == number of vectors we should try again with */
|
|
vectors = err;
|
|
}
|
|
|
|
if (vectors < vector_threshold) {
|
|
/* Can't allocate enough MSI-X interrupts? Oh well.
|
|
* This just means we'll go with either a single MSI
|
|
* vector or fall back to legacy interrupts.
|
|
*/
|
|
DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n");
|
|
adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
|
|
kfree(adapter->msix_entries);
|
|
adapter->msix_entries = NULL;
|
|
} else {
|
|
adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
|
|
/*
|
|
* Adjust for only the vectors we'll use, which is minimum
|
|
* of max_msix_q_vectors + NON_Q_VECTORS, or the number of
|
|
* vectors we were allocated.
|
|
*/
|
|
adapter->num_msix_vectors = min(vectors,
|
|
adapter->max_msix_q_vectors + NON_Q_VECTORS);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* Cache the descriptor ring offsets for RSS to the assigned rings.
|
|
*
|
|
**/
|
|
static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
bool ret = false;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
|
|
for (i = 0; i < adapter->num_rx_queues; i++)
|
|
adapter->rx_ring[i].reg_idx = i;
|
|
for (i = 0; i < adapter->num_tx_queues; i++)
|
|
adapter->tx_ring[i].reg_idx = i;
|
|
ret = true;
|
|
} else {
|
|
ret = false;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
/**
|
|
* ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* Cache the descriptor ring offsets for DCB to the assigned rings.
|
|
*
|
|
**/
|
|
static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
bool ret = false;
|
|
int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
/* the number of queues is assumed to be symmetric */
|
|
for (i = 0; i < dcb_i; i++) {
|
|
adapter->rx_ring[i].reg_idx = i << 3;
|
|
adapter->tx_ring[i].reg_idx = i << 2;
|
|
}
|
|
ret = true;
|
|
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
if (dcb_i == 8) {
|
|
/*
|
|
* Tx TC0 starts at: descriptor queue 0
|
|
* Tx TC1 starts at: descriptor queue 32
|
|
* Tx TC2 starts at: descriptor queue 64
|
|
* Tx TC3 starts at: descriptor queue 80
|
|
* Tx TC4 starts at: descriptor queue 96
|
|
* Tx TC5 starts at: descriptor queue 104
|
|
* Tx TC6 starts at: descriptor queue 112
|
|
* Tx TC7 starts at: descriptor queue 120
|
|
*
|
|
* Rx TC0-TC7 are offset by 16 queues each
|
|
*/
|
|
for (i = 0; i < 3; i++) {
|
|
adapter->tx_ring[i].reg_idx = i << 5;
|
|
adapter->rx_ring[i].reg_idx = i << 4;
|
|
}
|
|
for ( ; i < 5; i++) {
|
|
adapter->tx_ring[i].reg_idx =
|
|
((i + 2) << 4);
|
|
adapter->rx_ring[i].reg_idx = i << 4;
|
|
}
|
|
for ( ; i < dcb_i; i++) {
|
|
adapter->tx_ring[i].reg_idx =
|
|
((i + 8) << 3);
|
|
adapter->rx_ring[i].reg_idx = i << 4;
|
|
}
|
|
|
|
ret = true;
|
|
} else if (dcb_i == 4) {
|
|
/*
|
|
* Tx TC0 starts at: descriptor queue 0
|
|
* Tx TC1 starts at: descriptor queue 64
|
|
* Tx TC2 starts at: descriptor queue 96
|
|
* Tx TC3 starts at: descriptor queue 112
|
|
*
|
|
* Rx TC0-TC3 are offset by 32 queues each
|
|
*/
|
|
adapter->tx_ring[0].reg_idx = 0;
|
|
adapter->tx_ring[1].reg_idx = 64;
|
|
adapter->tx_ring[2].reg_idx = 96;
|
|
adapter->tx_ring[3].reg_idx = 112;
|
|
for (i = 0 ; i < dcb_i; i++)
|
|
adapter->rx_ring[i].reg_idx = i << 5;
|
|
|
|
ret = true;
|
|
} else {
|
|
ret = false;
|
|
}
|
|
} else {
|
|
ret = false;
|
|
}
|
|
} else {
|
|
ret = false;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* ixgbe_cache_ring_fdir - Descriptor ring to register mapping for Flow Director
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* Cache the descriptor ring offsets for Flow Director to the assigned rings.
|
|
*
|
|
**/
|
|
static bool inline ixgbe_cache_ring_fdir(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
bool ret = false;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED &&
|
|
((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
|
|
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))) {
|
|
for (i = 0; i < adapter->num_rx_queues; i++)
|
|
adapter->rx_ring[i].reg_idx = i;
|
|
for (i = 0; i < adapter->num_tx_queues; i++)
|
|
adapter->tx_ring[i].reg_idx = i;
|
|
ret = true;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef IXGBE_FCOE
|
|
/**
|
|
* ixgbe_cache_ring_fcoe - Descriptor ring to register mapping for the FCoE
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* Cache the descriptor ring offsets for FCoE mode to the assigned rings.
|
|
*
|
|
*/
|
|
static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i, fcoe_i = 0;
|
|
bool ret = false;
|
|
struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
|
|
|
|
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
|
|
ixgbe_cache_ring_dcb(adapter);
|
|
fcoe_i = adapter->rx_ring[0].reg_idx + 1;
|
|
}
|
|
#endif /* CONFIG_IXGBE_DCB */
|
|
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
|
|
if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
|
|
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
|
|
ixgbe_cache_ring_fdir(adapter);
|
|
else
|
|
ixgbe_cache_ring_rss(adapter);
|
|
|
|
fcoe_i = f->mask;
|
|
}
|
|
for (i = 0; i < f->indices; i++, fcoe_i++)
|
|
adapter->rx_ring[f->mask + i].reg_idx = fcoe_i;
|
|
ret = true;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#endif /* IXGBE_FCOE */
|
|
/**
|
|
* ixgbe_cache_ring_register - Descriptor ring to register mapping
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* Once we know the feature-set enabled for the device, we'll cache
|
|
* the register offset the descriptor ring is assigned to.
|
|
*
|
|
* Note, the order the various feature calls is important. It must start with
|
|
* the "most" features enabled at the same time, then trickle down to the
|
|
* least amount of features turned on at once.
|
|
**/
|
|
static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
|
|
{
|
|
/* start with default case */
|
|
adapter->rx_ring[0].reg_idx = 0;
|
|
adapter->tx_ring[0].reg_idx = 0;
|
|
|
|
#ifdef IXGBE_FCOE
|
|
if (ixgbe_cache_ring_fcoe(adapter))
|
|
return;
|
|
|
|
#endif /* IXGBE_FCOE */
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
if (ixgbe_cache_ring_dcb(adapter))
|
|
return;
|
|
|
|
#endif
|
|
if (ixgbe_cache_ring_fdir(adapter))
|
|
return;
|
|
|
|
if (ixgbe_cache_ring_rss(adapter))
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_alloc_queues - Allocate memory for all rings
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* We allocate one ring per queue at run-time since we don't know the
|
|
* number of queues at compile-time. The polling_netdev array is
|
|
* intended for Multiqueue, but should work fine with a single queue.
|
|
**/
|
|
static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
|
|
adapter->tx_ring = kcalloc(adapter->num_tx_queues,
|
|
sizeof(struct ixgbe_ring), GFP_KERNEL);
|
|
if (!adapter->tx_ring)
|
|
goto err_tx_ring_allocation;
|
|
|
|
adapter->rx_ring = kcalloc(adapter->num_rx_queues,
|
|
sizeof(struct ixgbe_ring), GFP_KERNEL);
|
|
if (!adapter->rx_ring)
|
|
goto err_rx_ring_allocation;
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
adapter->tx_ring[i].count = adapter->tx_ring_count;
|
|
adapter->tx_ring[i].queue_index = i;
|
|
}
|
|
|
|
for (i = 0; i < adapter->num_rx_queues; i++) {
|
|
adapter->rx_ring[i].count = adapter->rx_ring_count;
|
|
adapter->rx_ring[i].queue_index = i;
|
|
}
|
|
|
|
ixgbe_cache_ring_register(adapter);
|
|
|
|
return 0;
|
|
|
|
err_rx_ring_allocation:
|
|
kfree(adapter->tx_ring);
|
|
err_tx_ring_allocation:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_interrupt_capability - set MSI-X or MSI if supported
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* Attempt to configure the interrupts using the best available
|
|
* capabilities of the hardware and the kernel.
|
|
**/
|
|
static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int err = 0;
|
|
int vector, v_budget;
|
|
|
|
/*
|
|
* It's easy to be greedy for MSI-X vectors, but it really
|
|
* doesn't do us much good if we have a lot more vectors
|
|
* than CPU's. So let's be conservative and only ask for
|
|
* (roughly) twice the number of vectors as there are CPU's.
|
|
*/
|
|
v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues,
|
|
(int)(num_online_cpus() * 2)) + NON_Q_VECTORS;
|
|
|
|
/*
|
|
* At the same time, hardware can only support a maximum of
|
|
* hw.mac->max_msix_vectors vectors. With features
|
|
* such as RSS and VMDq, we can easily surpass the number of Rx and Tx
|
|
* descriptor queues supported by our device. Thus, we cap it off in
|
|
* those rare cases where the cpu count also exceeds our vector limit.
|
|
*/
|
|
v_budget = min(v_budget, (int)hw->mac.max_msix_vectors);
|
|
|
|
/* A failure in MSI-X entry allocation isn't fatal, but it does
|
|
* mean we disable MSI-X capabilities of the adapter. */
|
|
adapter->msix_entries = kcalloc(v_budget,
|
|
sizeof(struct msix_entry), GFP_KERNEL);
|
|
if (adapter->msix_entries) {
|
|
for (vector = 0; vector < v_budget; vector++)
|
|
adapter->msix_entries[vector].entry = vector;
|
|
|
|
ixgbe_acquire_msix_vectors(adapter, v_budget);
|
|
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
|
|
goto out;
|
|
}
|
|
|
|
adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
|
|
adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
|
|
adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
|
|
adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
|
|
adapter->atr_sample_rate = 0;
|
|
ixgbe_set_num_queues(adapter);
|
|
|
|
err = pci_enable_msi(adapter->pdev);
|
|
if (!err) {
|
|
adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
|
|
} else {
|
|
DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, "
|
|
"falling back to legacy. Error: %d\n", err);
|
|
/* reset err */
|
|
err = 0;
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* We allocate one q_vector per queue interrupt. If allocation fails we
|
|
* return -ENOMEM.
|
|
**/
|
|
static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
|
|
{
|
|
int q_idx, num_q_vectors;
|
|
struct ixgbe_q_vector *q_vector;
|
|
int napi_vectors;
|
|
int (*poll)(struct napi_struct *, int);
|
|
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
|
|
num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
|
|
napi_vectors = adapter->num_rx_queues;
|
|
poll = &ixgbe_clean_rxtx_many;
|
|
} else {
|
|
num_q_vectors = 1;
|
|
napi_vectors = 1;
|
|
poll = &ixgbe_poll;
|
|
}
|
|
|
|
for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
|
|
q_vector = kzalloc(sizeof(struct ixgbe_q_vector), GFP_KERNEL);
|
|
if (!q_vector)
|
|
goto err_out;
|
|
q_vector->adapter = adapter;
|
|
q_vector->eitr = adapter->eitr_param;
|
|
q_vector->v_idx = q_idx;
|
|
netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
|
|
adapter->q_vector[q_idx] = q_vector;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
while (q_idx) {
|
|
q_idx--;
|
|
q_vector = adapter->q_vector[q_idx];
|
|
netif_napi_del(&q_vector->napi);
|
|
kfree(q_vector);
|
|
adapter->q_vector[q_idx] = NULL;
|
|
}
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_free_q_vectors - Free memory allocated for interrupt vectors
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* This function frees the memory allocated to the q_vectors. In addition if
|
|
* NAPI is enabled it will delete any references to the NAPI struct prior
|
|
* to freeing the q_vector.
|
|
**/
|
|
static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter)
|
|
{
|
|
int q_idx, num_q_vectors;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
|
|
num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
|
|
else
|
|
num_q_vectors = 1;
|
|
|
|
for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
|
|
struct ixgbe_q_vector *q_vector = adapter->q_vector[q_idx];
|
|
adapter->q_vector[q_idx] = NULL;
|
|
netif_napi_del(&q_vector->napi);
|
|
kfree(q_vector);
|
|
}
|
|
}
|
|
|
|
static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
|
|
{
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
|
|
adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
|
|
pci_disable_msix(adapter->pdev);
|
|
kfree(adapter->msix_entries);
|
|
adapter->msix_entries = NULL;
|
|
} else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
|
|
adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED;
|
|
pci_disable_msi(adapter->pdev);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_interrupt_scheme - Determine proper interrupt scheme
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* We determine which interrupt scheme to use based on...
|
|
* - Kernel support (MSI, MSI-X)
|
|
* - which can be user-defined (via MODULE_PARAM)
|
|
* - Hardware queue count (num_*_queues)
|
|
* - defined by miscellaneous hardware support/features (RSS, etc.)
|
|
**/
|
|
int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
|
|
{
|
|
int err;
|
|
|
|
/* Number of supported queues */
|
|
ixgbe_set_num_queues(adapter);
|
|
|
|
err = ixgbe_set_interrupt_capability(adapter);
|
|
if (err) {
|
|
DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n");
|
|
goto err_set_interrupt;
|
|
}
|
|
|
|
err = ixgbe_alloc_q_vectors(adapter);
|
|
if (err) {
|
|
DPRINTK(PROBE, ERR, "Unable to allocate memory for queue "
|
|
"vectors\n");
|
|
goto err_alloc_q_vectors;
|
|
}
|
|
|
|
err = ixgbe_alloc_queues(adapter);
|
|
if (err) {
|
|
DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
|
|
goto err_alloc_queues;
|
|
}
|
|
|
|
DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, "
|
|
"Tx Queue count = %u\n",
|
|
(adapter->num_rx_queues > 1) ? "Enabled" :
|
|
"Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
|
|
|
|
set_bit(__IXGBE_DOWN, &adapter->state);
|
|
|
|
return 0;
|
|
|
|
err_alloc_queues:
|
|
ixgbe_free_q_vectors(adapter);
|
|
err_alloc_q_vectors:
|
|
ixgbe_reset_interrupt_capability(adapter);
|
|
err_set_interrupt:
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
|
|
* @adapter: board private structure to clear interrupt scheme on
|
|
*
|
|
* We go through and clear interrupt specific resources and reset the structure
|
|
* to pre-load conditions
|
|
**/
|
|
void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
|
|
{
|
|
kfree(adapter->tx_ring);
|
|
kfree(adapter->rx_ring);
|
|
adapter->tx_ring = NULL;
|
|
adapter->rx_ring = NULL;
|
|
|
|
ixgbe_free_q_vectors(adapter);
|
|
ixgbe_reset_interrupt_capability(adapter);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_sfp_timer - worker thread to find a missing module
|
|
* @data: pointer to our adapter struct
|
|
**/
|
|
static void ixgbe_sfp_timer(unsigned long data)
|
|
{
|
|
struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
|
|
|
|
/*
|
|
* Do the sfp_timer outside of interrupt context due to the
|
|
* delays that sfp+ detection requires
|
|
*/
|
|
schedule_work(&adapter->sfp_task);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_sfp_task - worker thread to find a missing module
|
|
* @work: pointer to work_struct containing our data
|
|
**/
|
|
static void ixgbe_sfp_task(struct work_struct *work)
|
|
{
|
|
struct ixgbe_adapter *adapter = container_of(work,
|
|
struct ixgbe_adapter,
|
|
sfp_task);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
if ((hw->phy.type == ixgbe_phy_nl) &&
|
|
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
|
|
s32 ret = hw->phy.ops.identify_sfp(hw);
|
|
if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
|
|
goto reschedule;
|
|
ret = hw->phy.ops.reset(hw);
|
|
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
dev_err(&adapter->pdev->dev, "failed to initialize "
|
|
"because an unsupported SFP+ module type "
|
|
"was detected.\n"
|
|
"Reload the driver after installing a "
|
|
"supported module.\n");
|
|
unregister_netdev(adapter->netdev);
|
|
} else {
|
|
DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
|
|
hw->phy.sfp_type);
|
|
}
|
|
/* don't need this routine any more */
|
|
clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
|
|
}
|
|
return;
|
|
reschedule:
|
|
if (test_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state))
|
|
mod_timer(&adapter->sfp_timer,
|
|
round_jiffies(jiffies + (2 * HZ)));
|
|
}
|
|
|
|
/**
|
|
* ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* ixgbe_sw_init initializes the Adapter private data structure.
|
|
* Fields are initialized based on PCI device information and
|
|
* OS network device settings (MTU size).
|
|
**/
|
|
static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
unsigned int rss;
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
int j;
|
|
struct tc_configuration *tc;
|
|
#endif
|
|
|
|
/* PCI config space info */
|
|
|
|
hw->vendor_id = pdev->vendor;
|
|
hw->device_id = pdev->device;
|
|
hw->revision_id = pdev->revision;
|
|
hw->subsystem_vendor_id = pdev->subsystem_vendor;
|
|
hw->subsystem_device_id = pdev->subsystem_device;
|
|
|
|
/* Set capability flags */
|
|
rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus());
|
|
adapter->ring_feature[RING_F_RSS].indices = rss;
|
|
adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
|
|
adapter->ring_feature[RING_F_DCB].indices = IXGBE_MAX_DCB_INDICES;
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT)
|
|
adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
|
|
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
|
|
} else if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
|
|
adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
|
|
adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
|
|
adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
|
|
adapter->ring_feature[RING_F_FDIR].indices =
|
|
IXGBE_MAX_FDIR_INDICES;
|
|
adapter->atr_sample_rate = 20;
|
|
adapter->fdir_pballoc = 0;
|
|
#ifdef IXGBE_FCOE
|
|
adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
|
|
adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
|
|
adapter->ring_feature[RING_F_FCOE].indices = 0;
|
|
/* Default traffic class to use for FCoE */
|
|
adapter->fcoe.tc = IXGBE_FCOE_DEFTC;
|
|
#endif /* IXGBE_FCOE */
|
|
}
|
|
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
/* Configure DCB traffic classes */
|
|
for (j = 0; j < MAX_TRAFFIC_CLASS; j++) {
|
|
tc = &adapter->dcb_cfg.tc_config[j];
|
|
tc->path[DCB_TX_CONFIG].bwg_id = 0;
|
|
tc->path[DCB_TX_CONFIG].bwg_percent = 12 + (j & 1);
|
|
tc->path[DCB_RX_CONFIG].bwg_id = 0;
|
|
tc->path[DCB_RX_CONFIG].bwg_percent = 12 + (j & 1);
|
|
tc->dcb_pfc = pfc_disabled;
|
|
}
|
|
adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100;
|
|
adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100;
|
|
adapter->dcb_cfg.rx_pba_cfg = pba_equal;
|
|
adapter->dcb_cfg.pfc_mode_enable = false;
|
|
adapter->dcb_cfg.round_robin_enable = false;
|
|
adapter->dcb_set_bitmap = 0x00;
|
|
ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg,
|
|
adapter->ring_feature[RING_F_DCB].indices);
|
|
|
|
#endif
|
|
|
|
/* default flow control settings */
|
|
hw->fc.requested_mode = ixgbe_fc_full;
|
|
hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */
|
|
#ifdef CONFIG_DCB
|
|
adapter->last_lfc_mode = hw->fc.current_mode;
|
|
#endif
|
|
hw->fc.high_water = IXGBE_DEFAULT_FCRTH;
|
|
hw->fc.low_water = IXGBE_DEFAULT_FCRTL;
|
|
hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
|
|
hw->fc.send_xon = true;
|
|
hw->fc.disable_fc_autoneg = false;
|
|
|
|
/* enable itr by default in dynamic mode */
|
|
adapter->itr_setting = 1;
|
|
adapter->eitr_param = 20000;
|
|
|
|
/* set defaults for eitr in MegaBytes */
|
|
adapter->eitr_low = 10;
|
|
adapter->eitr_high = 20;
|
|
|
|
/* set default ring sizes */
|
|
adapter->tx_ring_count = IXGBE_DEFAULT_TXD;
|
|
adapter->rx_ring_count = IXGBE_DEFAULT_RXD;
|
|
|
|
/* initialize eeprom parameters */
|
|
if (ixgbe_init_eeprom_params_generic(hw)) {
|
|
dev_err(&pdev->dev, "EEPROM initialization failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* enable rx csum by default */
|
|
adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
|
|
|
|
set_bit(__IXGBE_DOWN, &adapter->state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_tx_resources - allocate Tx resources (Descriptors)
|
|
* @adapter: board private structure
|
|
* @tx_ring: tx descriptor ring (for a specific queue) to setup
|
|
*
|
|
* Return 0 on success, negative on failure
|
|
**/
|
|
int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int size;
|
|
|
|
size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
|
|
tx_ring->tx_buffer_info = vmalloc(size);
|
|
if (!tx_ring->tx_buffer_info)
|
|
goto err;
|
|
memset(tx_ring->tx_buffer_info, 0, size);
|
|
|
|
/* round up to nearest 4K */
|
|
tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
|
|
tx_ring->size = ALIGN(tx_ring->size, 4096);
|
|
|
|
tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
|
|
&tx_ring->dma);
|
|
if (!tx_ring->desc)
|
|
goto err;
|
|
|
|
tx_ring->next_to_use = 0;
|
|
tx_ring->next_to_clean = 0;
|
|
tx_ring->work_limit = tx_ring->count;
|
|
return 0;
|
|
|
|
err:
|
|
vfree(tx_ring->tx_buffer_info);
|
|
tx_ring->tx_buffer_info = NULL;
|
|
DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit "
|
|
"descriptor ring\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_all_tx_resources - allocate all queues Tx resources
|
|
* @adapter: board private structure
|
|
*
|
|
* If this function returns with an error, then it's possible one or
|
|
* more of the rings is populated (while the rest are not). It is the
|
|
* callers duty to clean those orphaned rings.
|
|
*
|
|
* Return 0 on success, negative on failure
|
|
**/
|
|
static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i, err = 0;
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
err = ixgbe_setup_tx_resources(adapter, &adapter->tx_ring[i]);
|
|
if (!err)
|
|
continue;
|
|
DPRINTK(PROBE, ERR, "Allocation for Tx Queue %u failed\n", i);
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_rx_resources - allocate Rx resources (Descriptors)
|
|
* @adapter: board private structure
|
|
* @rx_ring: rx descriptor ring (for a specific queue) to setup
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *rx_ring)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int size;
|
|
|
|
size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
|
|
rx_ring->rx_buffer_info = vmalloc(size);
|
|
if (!rx_ring->rx_buffer_info) {
|
|
DPRINTK(PROBE, ERR,
|
|
"vmalloc allocation failed for the rx desc ring\n");
|
|
goto alloc_failed;
|
|
}
|
|
memset(rx_ring->rx_buffer_info, 0, size);
|
|
|
|
/* Round up to nearest 4K */
|
|
rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
|
|
rx_ring->size = ALIGN(rx_ring->size, 4096);
|
|
|
|
rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size, &rx_ring->dma);
|
|
|
|
if (!rx_ring->desc) {
|
|
DPRINTK(PROBE, ERR,
|
|
"Memory allocation failed for the rx desc ring\n");
|
|
vfree(rx_ring->rx_buffer_info);
|
|
goto alloc_failed;
|
|
}
|
|
|
|
rx_ring->next_to_clean = 0;
|
|
rx_ring->next_to_use = 0;
|
|
|
|
return 0;
|
|
|
|
alloc_failed:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_all_rx_resources - allocate all queues Rx resources
|
|
* @adapter: board private structure
|
|
*
|
|
* If this function returns with an error, then it's possible one or
|
|
* more of the rings is populated (while the rest are not). It is the
|
|
* callers duty to clean those orphaned rings.
|
|
*
|
|
* Return 0 on success, negative on failure
|
|
**/
|
|
|
|
static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i, err = 0;
|
|
|
|
for (i = 0; i < adapter->num_rx_queues; i++) {
|
|
err = ixgbe_setup_rx_resources(adapter, &adapter->rx_ring[i]);
|
|
if (!err)
|
|
continue;
|
|
DPRINTK(PROBE, ERR, "Allocation for Rx Queue %u failed\n", i);
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_free_tx_resources - Free Tx Resources per Queue
|
|
* @adapter: board private structure
|
|
* @tx_ring: Tx descriptor ring for a specific queue
|
|
*
|
|
* Free all transmit software resources
|
|
**/
|
|
void ixgbe_free_tx_resources(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
|
|
ixgbe_clean_tx_ring(adapter, tx_ring);
|
|
|
|
vfree(tx_ring->tx_buffer_info);
|
|
tx_ring->tx_buffer_info = NULL;
|
|
|
|
pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
|
|
|
|
tx_ring->desc = NULL;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_free_all_tx_resources - Free Tx Resources for All Queues
|
|
* @adapter: board private structure
|
|
*
|
|
* Free all transmit software resources
|
|
**/
|
|
static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < adapter->num_tx_queues; i++)
|
|
if (adapter->tx_ring[i].desc)
|
|
ixgbe_free_tx_resources(adapter, &adapter->tx_ring[i]);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_free_rx_resources - Free Rx Resources
|
|
* @adapter: board private structure
|
|
* @rx_ring: ring to clean the resources from
|
|
*
|
|
* Free all receive software resources
|
|
**/
|
|
void ixgbe_free_rx_resources(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *rx_ring)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
|
|
ixgbe_clean_rx_ring(adapter, rx_ring);
|
|
|
|
vfree(rx_ring->rx_buffer_info);
|
|
rx_ring->rx_buffer_info = NULL;
|
|
|
|
pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
|
|
|
|
rx_ring->desc = NULL;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_free_all_rx_resources - Free Rx Resources for All Queues
|
|
* @adapter: board private structure
|
|
*
|
|
* Free all receive software resources
|
|
**/
|
|
static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < adapter->num_rx_queues; i++)
|
|
if (adapter->rx_ring[i].desc)
|
|
ixgbe_free_rx_resources(adapter, &adapter->rx_ring[i]);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_change_mtu - Change the Maximum Transfer Unit
|
|
* @netdev: network interface device structure
|
|
* @new_mtu: new value for maximum frame size
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
|
|
|
|
/* MTU < 68 is an error and causes problems on some kernels */
|
|
if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
|
|
return -EINVAL;
|
|
|
|
DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n",
|
|
netdev->mtu, new_mtu);
|
|
/* must set new MTU before calling down or up */
|
|
netdev->mtu = new_mtu;
|
|
|
|
if (netif_running(netdev))
|
|
ixgbe_reinit_locked(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_open - Called when a network interface is made active
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
*
|
|
* The open entry point is called when a network interface is made
|
|
* active by the system (IFF_UP). At this point all resources needed
|
|
* for transmit and receive operations are allocated, the interrupt
|
|
* handler is registered with the OS, the watchdog timer is started,
|
|
* and the stack is notified that the interface is ready.
|
|
**/
|
|
static int ixgbe_open(struct net_device *netdev)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
int err;
|
|
|
|
/* disallow open during test */
|
|
if (test_bit(__IXGBE_TESTING, &adapter->state))
|
|
return -EBUSY;
|
|
|
|
netif_carrier_off(netdev);
|
|
|
|
/* allocate transmit descriptors */
|
|
err = ixgbe_setup_all_tx_resources(adapter);
|
|
if (err)
|
|
goto err_setup_tx;
|
|
|
|
/* allocate receive descriptors */
|
|
err = ixgbe_setup_all_rx_resources(adapter);
|
|
if (err)
|
|
goto err_setup_rx;
|
|
|
|
ixgbe_configure(adapter);
|
|
|
|
err = ixgbe_request_irq(adapter);
|
|
if (err)
|
|
goto err_req_irq;
|
|
|
|
err = ixgbe_up_complete(adapter);
|
|
if (err)
|
|
goto err_up;
|
|
|
|
netif_tx_start_all_queues(netdev);
|
|
|
|
return 0;
|
|
|
|
err_up:
|
|
ixgbe_release_hw_control(adapter);
|
|
ixgbe_free_irq(adapter);
|
|
err_req_irq:
|
|
err_setup_rx:
|
|
ixgbe_free_all_rx_resources(adapter);
|
|
err_setup_tx:
|
|
ixgbe_free_all_tx_resources(adapter);
|
|
ixgbe_reset(adapter);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_close - Disables a network interface
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns 0, this is not allowed to fail
|
|
*
|
|
* The close entry point is called when an interface is de-activated
|
|
* by the OS. The hardware is still under the drivers control, but
|
|
* needs to be disabled. A global MAC reset is issued to stop the
|
|
* hardware, and all transmit and receive resources are freed.
|
|
**/
|
|
static int ixgbe_close(struct net_device *netdev)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
ixgbe_down(adapter);
|
|
ixgbe_free_irq(adapter);
|
|
|
|
ixgbe_free_all_tx_resources(adapter);
|
|
ixgbe_free_all_rx_resources(adapter);
|
|
|
|
ixgbe_release_hw_control(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ixgbe_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
u32 err;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
|
|
err = pci_enable_device_mem(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR "ixgbe: Cannot enable PCI device from "
|
|
"suspend\n");
|
|
return err;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
pci_wake_from_d3(pdev, false);
|
|
|
|
err = ixgbe_init_interrupt_scheme(adapter);
|
|
if (err) {
|
|
printk(KERN_ERR "ixgbe: Cannot initialize interrupts for "
|
|
"device\n");
|
|
return err;
|
|
}
|
|
|
|
ixgbe_reset(adapter);
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
|
|
|
|
if (netif_running(netdev)) {
|
|
err = ixgbe_open(adapter->netdev);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
netif_device_attach(netdev);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ctrl, fctrl;
|
|
u32 wufc = adapter->wol;
|
|
#ifdef CONFIG_PM
|
|
int retval = 0;
|
|
#endif
|
|
|
|
netif_device_detach(netdev);
|
|
|
|
if (netif_running(netdev)) {
|
|
ixgbe_down(adapter);
|
|
ixgbe_free_irq(adapter);
|
|
ixgbe_free_all_tx_resources(adapter);
|
|
ixgbe_free_all_rx_resources(adapter);
|
|
}
|
|
ixgbe_clear_interrupt_scheme(adapter);
|
|
|
|
#ifdef CONFIG_PM
|
|
retval = pci_save_state(pdev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
#endif
|
|
if (wufc) {
|
|
ixgbe_set_rx_mode(netdev);
|
|
|
|
/* turn on all-multi mode if wake on multicast is enabled */
|
|
if (wufc & IXGBE_WUFC_MC) {
|
|
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
fctrl |= IXGBE_FCTRL_MPE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
|
|
}
|
|
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
|
|
ctrl |= IXGBE_CTRL_GIO_DIS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc);
|
|
} else {
|
|
IXGBE_WRITE_REG(hw, IXGBE_WUC, 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0);
|
|
}
|
|
|
|
if (wufc && hw->mac.type == ixgbe_mac_82599EB)
|
|
pci_wake_from_d3(pdev, true);
|
|
else
|
|
pci_wake_from_d3(pdev, false);
|
|
|
|
*enable_wake = !!wufc;
|
|
|
|
ixgbe_release_hw_control(adapter);
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
int retval;
|
|
bool wake;
|
|
|
|
retval = __ixgbe_shutdown(pdev, &wake);
|
|
if (retval)
|
|
return retval;
|
|
|
|
if (wake) {
|
|
pci_prepare_to_sleep(pdev);
|
|
} else {
|
|
pci_wake_from_d3(pdev, false);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static void ixgbe_shutdown(struct pci_dev *pdev)
|
|
{
|
|
bool wake;
|
|
|
|
__ixgbe_shutdown(pdev, &wake);
|
|
|
|
if (system_state == SYSTEM_POWER_OFF) {
|
|
pci_wake_from_d3(pdev, wake);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_update_stats - Update the board statistics counters.
|
|
* @adapter: board private structure
|
|
**/
|
|
void ixgbe_update_stats(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 total_mpc = 0;
|
|
u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
u64 rsc_count = 0;
|
|
for (i = 0; i < 16; i++)
|
|
adapter->hw_rx_no_dma_resources +=
|
|
IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
|
|
for (i = 0; i < adapter->num_rx_queues; i++)
|
|
rsc_count += adapter->rx_ring[i].rsc_count;
|
|
adapter->rsc_count = rsc_count;
|
|
}
|
|
|
|
adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
|
|
for (i = 0; i < 8; i++) {
|
|
/* for packet buffers not used, the register should read 0 */
|
|
mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i));
|
|
missed_rx += mpc;
|
|
adapter->stats.mpc[i] += mpc;
|
|
total_mpc += adapter->stats.mpc[i];
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
adapter->stats.rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i));
|
|
adapter->stats.qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i));
|
|
adapter->stats.qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i));
|
|
adapter->stats.qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
|
|
adapter->stats.qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i));
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
adapter->stats.pxonrxc[i] += IXGBE_READ_REG(hw,
|
|
IXGBE_PXONRXCNT(i));
|
|
adapter->stats.pxoffrxc[i] += IXGBE_READ_REG(hw,
|
|
IXGBE_PXOFFRXCNT(i));
|
|
adapter->stats.qprdc[i] += IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
|
|
} else {
|
|
adapter->stats.pxonrxc[i] += IXGBE_READ_REG(hw,
|
|
IXGBE_PXONRXC(i));
|
|
adapter->stats.pxoffrxc[i] += IXGBE_READ_REG(hw,
|
|
IXGBE_PXOFFRXC(i));
|
|
}
|
|
adapter->stats.pxontxc[i] += IXGBE_READ_REG(hw,
|
|
IXGBE_PXONTXC(i));
|
|
adapter->stats.pxofftxc[i] += IXGBE_READ_REG(hw,
|
|
IXGBE_PXOFFTXC(i));
|
|
}
|
|
adapter->stats.gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
|
|
/* work around hardware counting issue */
|
|
adapter->stats.gprc -= missed_rx;
|
|
|
|
/* 82598 hardware only has a 32 bit counter in the high register */
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
|
|
IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
|
|
adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
|
|
IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
|
|
adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL);
|
|
IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
|
|
adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
|
|
adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
|
|
adapter->stats.fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
|
|
adapter->stats.fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
|
|
#ifdef IXGBE_FCOE
|
|
adapter->stats.fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
|
|
adapter->stats.fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
|
|
adapter->stats.fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
|
|
adapter->stats.fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
|
|
adapter->stats.fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
|
|
adapter->stats.fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
|
|
#endif /* IXGBE_FCOE */
|
|
} else {
|
|
adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
|
|
adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
|
|
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
|
|
adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
|
|
adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORH);
|
|
}
|
|
bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
|
|
adapter->stats.bprc += bprc;
|
|
adapter->stats.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
adapter->stats.mprc -= bprc;
|
|
adapter->stats.roc += IXGBE_READ_REG(hw, IXGBE_ROC);
|
|
adapter->stats.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
|
|
adapter->stats.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
|
|
adapter->stats.prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
|
|
adapter->stats.prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
|
|
adapter->stats.prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
|
|
adapter->stats.prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
|
|
adapter->stats.rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
|
|
lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC);
|
|
adapter->stats.lxontxc += lxon;
|
|
lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
|
|
adapter->stats.lxofftxc += lxoff;
|
|
adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
|
|
adapter->stats.gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
|
|
adapter->stats.mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
|
|
/*
|
|
* 82598 errata - tx of flow control packets is included in tx counters
|
|
*/
|
|
xon_off_tot = lxon + lxoff;
|
|
adapter->stats.gptc -= xon_off_tot;
|
|
adapter->stats.mptc -= xon_off_tot;
|
|
adapter->stats.gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN));
|
|
adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
|
|
adapter->stats.rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
|
|
adapter->stats.rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
|
|
adapter->stats.tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
|
|
adapter->stats.ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
|
|
adapter->stats.ptc64 -= xon_off_tot;
|
|
adapter->stats.ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
|
|
adapter->stats.ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
|
|
adapter->stats.ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
|
|
adapter->stats.ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
|
|
adapter->stats.ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
|
|
adapter->stats.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
|
|
|
|
/* Fill out the OS statistics structure */
|
|
adapter->net_stats.multicast = adapter->stats.mprc;
|
|
|
|
/* Rx Errors */
|
|
adapter->net_stats.rx_errors = adapter->stats.crcerrs +
|
|
adapter->stats.rlec;
|
|
adapter->net_stats.rx_dropped = 0;
|
|
adapter->net_stats.rx_length_errors = adapter->stats.rlec;
|
|
adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
|
|
adapter->net_stats.rx_missed_errors = total_mpc;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_watchdog - Timer Call-back
|
|
* @data: pointer to adapter cast into an unsigned long
|
|
**/
|
|
static void ixgbe_watchdog(unsigned long data)
|
|
{
|
|
struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 eics = 0;
|
|
int i;
|
|
|
|
/*
|
|
* Do the watchdog outside of interrupt context due to the lovely
|
|
* delays that some of the newer hardware requires
|
|
*/
|
|
|
|
if (test_bit(__IXGBE_DOWN, &adapter->state))
|
|
goto watchdog_short_circuit;
|
|
|
|
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
|
|
/*
|
|
* for legacy and MSI interrupts don't set any bits
|
|
* that are enabled for EIAM, because this operation
|
|
* would set *both* EIMS and EICS for any bit in EIAM
|
|
*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICS,
|
|
(IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
|
|
goto watchdog_reschedule;
|
|
}
|
|
|
|
/* get one bit for every active tx/rx interrupt vector */
|
|
for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
|
|
struct ixgbe_q_vector *qv = adapter->q_vector[i];
|
|
if (qv->rxr_count || qv->txr_count)
|
|
eics |= ((u64)1 << i);
|
|
}
|
|
|
|
/* Cause software interrupt to ensure rx rings are cleaned */
|
|
ixgbe_irq_rearm_queues(adapter, eics);
|
|
|
|
watchdog_reschedule:
|
|
/* Reset the timer */
|
|
mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
|
|
|
|
watchdog_short_circuit:
|
|
schedule_work(&adapter->watchdog_task);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_multispeed_fiber_task - worker thread to configure multispeed fiber
|
|
* @work: pointer to work_struct containing our data
|
|
**/
|
|
static void ixgbe_multispeed_fiber_task(struct work_struct *work)
|
|
{
|
|
struct ixgbe_adapter *adapter = container_of(work,
|
|
struct ixgbe_adapter,
|
|
multispeed_fiber_task);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 autoneg;
|
|
bool negotiation;
|
|
|
|
adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
|
|
autoneg = hw->phy.autoneg_advertised;
|
|
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
|
|
hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
|
|
if (hw->mac.ops.setup_link)
|
|
hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
|
|
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
|
|
adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_sfp_config_module_task - worker thread to configure a new SFP+ module
|
|
* @work: pointer to work_struct containing our data
|
|
**/
|
|
static void ixgbe_sfp_config_module_task(struct work_struct *work)
|
|
{
|
|
struct ixgbe_adapter *adapter = container_of(work,
|
|
struct ixgbe_adapter,
|
|
sfp_config_module_task);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 err;
|
|
|
|
adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
|
|
|
|
/* Time for electrical oscillations to settle down */
|
|
msleep(100);
|
|
err = hw->phy.ops.identify_sfp(hw);
|
|
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
dev_err(&adapter->pdev->dev, "failed to initialize because "
|
|
"an unsupported SFP+ module type was detected.\n"
|
|
"Reload the driver after installing a supported "
|
|
"module.\n");
|
|
unregister_netdev(adapter->netdev);
|
|
return;
|
|
}
|
|
hw->mac.ops.setup_sfp(hw);
|
|
|
|
if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
|
|
/* This will also work for DA Twinax connections */
|
|
schedule_work(&adapter->multispeed_fiber_task);
|
|
adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_fdir_reinit_task - worker thread to reinit FDIR filter table
|
|
* @work: pointer to work_struct containing our data
|
|
**/
|
|
static void ixgbe_fdir_reinit_task(struct work_struct *work)
|
|
{
|
|
struct ixgbe_adapter *adapter = container_of(work,
|
|
struct ixgbe_adapter,
|
|
fdir_reinit_task);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int i;
|
|
|
|
if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
|
|
for (i = 0; i < adapter->num_tx_queues; i++)
|
|
set_bit(__IXGBE_FDIR_INIT_DONE,
|
|
&(adapter->tx_ring[i].reinit_state));
|
|
} else {
|
|
DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, "
|
|
"ignored adding FDIR ATR filters \n");
|
|
}
|
|
/* Done FDIR Re-initialization, enable transmits */
|
|
netif_tx_start_all_queues(adapter->netdev);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_watchdog_task - worker thread to bring link up
|
|
* @work: pointer to work_struct containing our data
|
|
**/
|
|
static void ixgbe_watchdog_task(struct work_struct *work)
|
|
{
|
|
struct ixgbe_adapter *adapter = container_of(work,
|
|
struct ixgbe_adapter,
|
|
watchdog_task);
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 link_speed = adapter->link_speed;
|
|
bool link_up = adapter->link_up;
|
|
int i;
|
|
struct ixgbe_ring *tx_ring;
|
|
int some_tx_pending = 0;
|
|
|
|
adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
|
|
hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
|
|
if (link_up) {
|
|
#ifdef CONFIG_DCB
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
|
|
for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
|
|
hw->mac.ops.fc_enable(hw, i);
|
|
} else {
|
|
hw->mac.ops.fc_enable(hw, 0);
|
|
}
|
|
#else
|
|
hw->mac.ops.fc_enable(hw, 0);
|
|
#endif
|
|
}
|
|
|
|
if (link_up ||
|
|
time_after(jiffies, (adapter->link_check_timeout +
|
|
IXGBE_TRY_LINK_TIMEOUT))) {
|
|
adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
|
|
}
|
|
adapter->link_up = link_up;
|
|
adapter->link_speed = link_speed;
|
|
}
|
|
|
|
if (link_up) {
|
|
if (!netif_carrier_ok(netdev)) {
|
|
bool flow_rx, flow_tx;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
|
|
u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
|
|
flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
|
|
flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
|
|
} else {
|
|
u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
|
|
flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
|
|
flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
|
|
}
|
|
|
|
printk(KERN_INFO "ixgbe: %s NIC Link is Up %s, "
|
|
"Flow Control: %s\n",
|
|
netdev->name,
|
|
(link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
|
|
"10 Gbps" :
|
|
(link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
|
|
"1 Gbps" : "unknown speed")),
|
|
((flow_rx && flow_tx) ? "RX/TX" :
|
|
(flow_rx ? "RX" :
|
|
(flow_tx ? "TX" : "None"))));
|
|
|
|
netif_carrier_on(netdev);
|
|
} else {
|
|
/* Force detection of hung controller */
|
|
adapter->detect_tx_hung = true;
|
|
}
|
|
} else {
|
|
adapter->link_up = false;
|
|
adapter->link_speed = 0;
|
|
if (netif_carrier_ok(netdev)) {
|
|
printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
|
|
netdev->name);
|
|
netif_carrier_off(netdev);
|
|
}
|
|
}
|
|
|
|
if (!netif_carrier_ok(netdev)) {
|
|
for (i = 0; i < adapter->num_tx_queues; i++) {
|
|
tx_ring = &adapter->tx_ring[i];
|
|
if (tx_ring->next_to_use != tx_ring->next_to_clean) {
|
|
some_tx_pending = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (some_tx_pending) {
|
|
/* We've lost link, so the controller stops DMA,
|
|
* but we've got queued Tx work that's never going
|
|
* to get done, so reset controller to flush Tx.
|
|
* (Do the reset outside of interrupt context).
|
|
*/
|
|
schedule_work(&adapter->reset_task);
|
|
}
|
|
}
|
|
|
|
ixgbe_update_stats(adapter);
|
|
adapter->flags &= ~IXGBE_FLAG_IN_WATCHDOG_TASK;
|
|
}
|
|
|
|
static int ixgbe_tso(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring, struct sk_buff *skb,
|
|
u32 tx_flags, u8 *hdr_len)
|
|
{
|
|
struct ixgbe_adv_tx_context_desc *context_desc;
|
|
unsigned int i;
|
|
int err;
|
|
struct ixgbe_tx_buffer *tx_buffer_info;
|
|
u32 vlan_macip_lens = 0, type_tucmd_mlhl;
|
|
u32 mss_l4len_idx, l4len;
|
|
|
|
if (skb_is_gso(skb)) {
|
|
if (skb_header_cloned(skb)) {
|
|
err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
|
|
if (err)
|
|
return err;
|
|
}
|
|
l4len = tcp_hdrlen(skb);
|
|
*hdr_len += l4len;
|
|
|
|
if (skb->protocol == htons(ETH_P_IP)) {
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
iph->tot_len = 0;
|
|
iph->check = 0;
|
|
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
|
|
iph->daddr, 0,
|
|
IPPROTO_TCP,
|
|
0);
|
|
adapter->hw_tso_ctxt++;
|
|
} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
|
|
ipv6_hdr(skb)->payload_len = 0;
|
|
tcp_hdr(skb)->check =
|
|
~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
|
|
&ipv6_hdr(skb)->daddr,
|
|
0, IPPROTO_TCP, 0);
|
|
adapter->hw_tso6_ctxt++;
|
|
}
|
|
|
|
i = tx_ring->next_to_use;
|
|
|
|
tx_buffer_info = &tx_ring->tx_buffer_info[i];
|
|
context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
|
|
|
|
/* VLAN MACLEN IPLEN */
|
|
if (tx_flags & IXGBE_TX_FLAGS_VLAN)
|
|
vlan_macip_lens |=
|
|
(tx_flags & IXGBE_TX_FLAGS_VLAN_MASK);
|
|
vlan_macip_lens |= ((skb_network_offset(skb)) <<
|
|
IXGBE_ADVTXD_MACLEN_SHIFT);
|
|
*hdr_len += skb_network_offset(skb);
|
|
vlan_macip_lens |=
|
|
(skb_transport_header(skb) - skb_network_header(skb));
|
|
*hdr_len +=
|
|
(skb_transport_header(skb) - skb_network_header(skb));
|
|
context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
|
|
context_desc->seqnum_seed = 0;
|
|
|
|
/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
|
|
type_tucmd_mlhl = (IXGBE_TXD_CMD_DEXT |
|
|
IXGBE_ADVTXD_DTYP_CTXT);
|
|
|
|
if (skb->protocol == htons(ETH_P_IP))
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
|
|
|
|
/* MSS L4LEN IDX */
|
|
mss_l4len_idx =
|
|
(skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT);
|
|
mss_l4len_idx |= (l4len << IXGBE_ADVTXD_L4LEN_SHIFT);
|
|
/* use index 1 for TSO */
|
|
mss_l4len_idx |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
|
|
context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
|
|
|
|
tx_buffer_info->time_stamp = jiffies;
|
|
tx_buffer_info->next_to_watch = i;
|
|
|
|
i++;
|
|
if (i == tx_ring->count)
|
|
i = 0;
|
|
tx_ring->next_to_use = i;
|
|
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring,
|
|
struct sk_buff *skb, u32 tx_flags)
|
|
{
|
|
struct ixgbe_adv_tx_context_desc *context_desc;
|
|
unsigned int i;
|
|
struct ixgbe_tx_buffer *tx_buffer_info;
|
|
u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
|
|
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL ||
|
|
(tx_flags & IXGBE_TX_FLAGS_VLAN)) {
|
|
i = tx_ring->next_to_use;
|
|
tx_buffer_info = &tx_ring->tx_buffer_info[i];
|
|
context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
|
|
|
|
if (tx_flags & IXGBE_TX_FLAGS_VLAN)
|
|
vlan_macip_lens |=
|
|
(tx_flags & IXGBE_TX_FLAGS_VLAN_MASK);
|
|
vlan_macip_lens |= (skb_network_offset(skb) <<
|
|
IXGBE_ADVTXD_MACLEN_SHIFT);
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL)
|
|
vlan_macip_lens |= (skb_transport_header(skb) -
|
|
skb_network_header(skb));
|
|
|
|
context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
|
|
context_desc->seqnum_seed = 0;
|
|
|
|
type_tucmd_mlhl |= (IXGBE_TXD_CMD_DEXT |
|
|
IXGBE_ADVTXD_DTYP_CTXT);
|
|
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL) {
|
|
switch (skb->protocol) {
|
|
case cpu_to_be16(ETH_P_IP):
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
if (ip_hdr(skb)->protocol == IPPROTO_TCP)
|
|
type_tucmd_mlhl |=
|
|
IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
|
|
type_tucmd_mlhl |=
|
|
IXGBE_ADVTXD_TUCMD_L4T_SCTP;
|
|
break;
|
|
case cpu_to_be16(ETH_P_IPV6):
|
|
/* XXX what about other V6 headers?? */
|
|
if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
|
|
type_tucmd_mlhl |=
|
|
IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
|
|
type_tucmd_mlhl |=
|
|
IXGBE_ADVTXD_TUCMD_L4T_SCTP;
|
|
break;
|
|
default:
|
|
if (unlikely(net_ratelimit())) {
|
|
DPRINTK(PROBE, WARNING,
|
|
"partial checksum but proto=%x!\n",
|
|
skb->protocol);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
|
|
/* use index zero for tx checksum offload */
|
|
context_desc->mss_l4len_idx = 0;
|
|
|
|
tx_buffer_info->time_stamp = jiffies;
|
|
tx_buffer_info->next_to_watch = i;
|
|
|
|
adapter->hw_csum_tx_good++;
|
|
i++;
|
|
if (i == tx_ring->count)
|
|
i = 0;
|
|
tx_ring->next_to_use = i;
|
|
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring,
|
|
struct sk_buff *skb, u32 tx_flags,
|
|
unsigned int first)
|
|
{
|
|
struct ixgbe_tx_buffer *tx_buffer_info;
|
|
unsigned int len;
|
|
unsigned int total = skb->len;
|
|
unsigned int offset = 0, size, count = 0, i;
|
|
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
|
|
unsigned int f;
|
|
dma_addr_t *map;
|
|
|
|
i = tx_ring->next_to_use;
|
|
|
|
if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
|
|
dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
|
|
return 0;
|
|
}
|
|
|
|
map = skb_shinfo(skb)->dma_maps;
|
|
|
|
if (tx_flags & IXGBE_TX_FLAGS_FCOE)
|
|
/* excluding fcoe_crc_eof for FCoE */
|
|
total -= sizeof(struct fcoe_crc_eof);
|
|
|
|
len = min(skb_headlen(skb), total);
|
|
while (len) {
|
|
tx_buffer_info = &tx_ring->tx_buffer_info[i];
|
|
size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
|
|
|
|
tx_buffer_info->length = size;
|
|
tx_buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
|
|
tx_buffer_info->time_stamp = jiffies;
|
|
tx_buffer_info->next_to_watch = i;
|
|
|
|
len -= size;
|
|
total -= size;
|
|
offset += size;
|
|
count++;
|
|
|
|
if (len) {
|
|
i++;
|
|
if (i == tx_ring->count)
|
|
i = 0;
|
|
}
|
|
}
|
|
|
|
for (f = 0; f < nr_frags; f++) {
|
|
struct skb_frag_struct *frag;
|
|
|
|
frag = &skb_shinfo(skb)->frags[f];
|
|
len = min((unsigned int)frag->size, total);
|
|
offset = 0;
|
|
|
|
while (len) {
|
|
i++;
|
|
if (i == tx_ring->count)
|
|
i = 0;
|
|
|
|
tx_buffer_info = &tx_ring->tx_buffer_info[i];
|
|
size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
|
|
|
|
tx_buffer_info->length = size;
|
|
tx_buffer_info->dma = map[f] + offset;
|
|
tx_buffer_info->time_stamp = jiffies;
|
|
tx_buffer_info->next_to_watch = i;
|
|
|
|
len -= size;
|
|
total -= size;
|
|
offset += size;
|
|
count++;
|
|
}
|
|
if (total == 0)
|
|
break;
|
|
}
|
|
|
|
tx_ring->tx_buffer_info[i].skb = skb;
|
|
tx_ring->tx_buffer_info[first].next_to_watch = i;
|
|
|
|
return count;
|
|
}
|
|
|
|
static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
|
|
struct ixgbe_ring *tx_ring,
|
|
int tx_flags, int count, u32 paylen, u8 hdr_len)
|
|
{
|
|
union ixgbe_adv_tx_desc *tx_desc = NULL;
|
|
struct ixgbe_tx_buffer *tx_buffer_info;
|
|
u32 olinfo_status = 0, cmd_type_len = 0;
|
|
unsigned int i;
|
|
u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS;
|
|
|
|
cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA;
|
|
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT;
|
|
|
|
if (tx_flags & IXGBE_TX_FLAGS_VLAN)
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
|
|
|
|
if (tx_flags & IXGBE_TX_FLAGS_TSO) {
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
|
|
|
|
olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
|
|
IXGBE_ADVTXD_POPTS_SHIFT;
|
|
|
|
/* use index 1 context for tso */
|
|
olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
|
|
if (tx_flags & IXGBE_TX_FLAGS_IPV4)
|
|
olinfo_status |= IXGBE_TXD_POPTS_IXSM <<
|
|
IXGBE_ADVTXD_POPTS_SHIFT;
|
|
|
|
} else if (tx_flags & IXGBE_TX_FLAGS_CSUM)
|
|
olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
|
|
IXGBE_ADVTXD_POPTS_SHIFT;
|
|
|
|
if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
|
|
olinfo_status |= IXGBE_ADVTXD_CC;
|
|
olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
|
|
if (tx_flags & IXGBE_TX_FLAGS_FSO)
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
|
|
}
|
|
|
|
olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
|
|
|
|
i = tx_ring->next_to_use;
|
|
while (count--) {
|
|
tx_buffer_info = &tx_ring->tx_buffer_info[i];
|
|
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
|
|
tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma);
|
|
tx_desc->read.cmd_type_len =
|
|
cpu_to_le32(cmd_type_len | tx_buffer_info->length);
|
|
tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
|
|
i++;
|
|
if (i == tx_ring->count)
|
|
i = 0;
|
|
}
|
|
|
|
tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd);
|
|
|
|
/*
|
|
* Force memory writes to complete before letting h/w
|
|
* know there are new descriptors to fetch. (Only
|
|
* applicable for weak-ordered memory model archs,
|
|
* such as IA-64).
|
|
*/
|
|
wmb();
|
|
|
|
tx_ring->next_to_use = i;
|
|
writel(i, adapter->hw.hw_addr + tx_ring->tail);
|
|
}
|
|
|
|
static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
|
|
int queue, u32 tx_flags)
|
|
{
|
|
/* Right now, we support IPv4 only */
|
|
struct ixgbe_atr_input atr_input;
|
|
struct tcphdr *th;
|
|
struct udphdr *uh;
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
struct ethhdr *eth = (struct ethhdr *)skb->data;
|
|
u16 vlan_id, src_port, dst_port, flex_bytes;
|
|
u32 src_ipv4_addr, dst_ipv4_addr;
|
|
u8 l4type = 0;
|
|
|
|
/* check if we're UDP or TCP */
|
|
if (iph->protocol == IPPROTO_TCP) {
|
|
th = tcp_hdr(skb);
|
|
src_port = th->source;
|
|
dst_port = th->dest;
|
|
l4type |= IXGBE_ATR_L4TYPE_TCP;
|
|
/* l4type IPv4 type is 0, no need to assign */
|
|
} else if(iph->protocol == IPPROTO_UDP) {
|
|
uh = udp_hdr(skb);
|
|
src_port = uh->source;
|
|
dst_port = uh->dest;
|
|
l4type |= IXGBE_ATR_L4TYPE_UDP;
|
|
/* l4type IPv4 type is 0, no need to assign */
|
|
} else {
|
|
/* Unsupported L4 header, just bail here */
|
|
return;
|
|
}
|
|
|
|
memset(&atr_input, 0, sizeof(struct ixgbe_atr_input));
|
|
|
|
vlan_id = (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK) >>
|
|
IXGBE_TX_FLAGS_VLAN_SHIFT;
|
|
src_ipv4_addr = iph->saddr;
|
|
dst_ipv4_addr = iph->daddr;
|
|
flex_bytes = eth->h_proto;
|
|
|
|
ixgbe_atr_set_vlan_id_82599(&atr_input, vlan_id);
|
|
ixgbe_atr_set_src_port_82599(&atr_input, dst_port);
|
|
ixgbe_atr_set_dst_port_82599(&atr_input, src_port);
|
|
ixgbe_atr_set_flex_byte_82599(&atr_input, flex_bytes);
|
|
ixgbe_atr_set_l4type_82599(&atr_input, l4type);
|
|
/* src and dst are inverted, think how the receiver sees them */
|
|
ixgbe_atr_set_src_ipv4_82599(&atr_input, dst_ipv4_addr);
|
|
ixgbe_atr_set_dst_ipv4_82599(&atr_input, src_ipv4_addr);
|
|
|
|
/* This assumes the Rx queue and Tx queue are bound to the same CPU */
|
|
ixgbe_fdir_add_signature_filter_82599(&adapter->hw, &atr_input, queue);
|
|
}
|
|
|
|
static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
|
|
struct ixgbe_ring *tx_ring, int size)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
netif_stop_subqueue(netdev, tx_ring->queue_index);
|
|
/* Herbert's original patch had:
|
|
* smp_mb__after_netif_stop_queue();
|
|
* but since that doesn't exist yet, just open code it. */
|
|
smp_mb();
|
|
|
|
/* We need to check again in a case another CPU has just
|
|
* made room available. */
|
|
if (likely(IXGBE_DESC_UNUSED(tx_ring) < size))
|
|
return -EBUSY;
|
|
|
|
/* A reprieve! - use start_queue because it doesn't call schedule */
|
|
netif_start_subqueue(netdev, tx_ring->queue_index);
|
|
++adapter->restart_queue;
|
|
return 0;
|
|
}
|
|
|
|
static int ixgbe_maybe_stop_tx(struct net_device *netdev,
|
|
struct ixgbe_ring *tx_ring, int size)
|
|
{
|
|
if (likely(IXGBE_DESC_UNUSED(tx_ring) >= size))
|
|
return 0;
|
|
return __ixgbe_maybe_stop_tx(netdev, tx_ring, size);
|
|
}
|
|
|
|
static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(dev);
|
|
|
|
if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
|
|
return smp_processor_id();
|
|
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
|
|
return (skb->vlan_tci & IXGBE_TX_FLAGS_VLAN_PRIO_MASK) >> 13;
|
|
|
|
return skb_tx_hash(dev, skb);
|
|
}
|
|
|
|
static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_ring *tx_ring;
|
|
unsigned int first;
|
|
unsigned int tx_flags = 0;
|
|
u8 hdr_len = 0;
|
|
int r_idx = 0, tso;
|
|
int count = 0;
|
|
unsigned int f;
|
|
|
|
if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
|
|
tx_flags |= vlan_tx_tag_get(skb);
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
|
|
tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK;
|
|
tx_flags |= (skb->queue_mapping << 13);
|
|
}
|
|
tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
|
|
tx_flags |= IXGBE_TX_FLAGS_VLAN;
|
|
} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
|
|
if (skb->priority != TC_PRIO_CONTROL) {
|
|
tx_flags |= (skb->queue_mapping << 13);
|
|
tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
|
|
tx_flags |= IXGBE_TX_FLAGS_VLAN;
|
|
} else {
|
|
skb->queue_mapping =
|
|
adapter->ring_feature[RING_F_DCB].indices-1;
|
|
}
|
|
}
|
|
|
|
r_idx = skb->queue_mapping;
|
|
tx_ring = &adapter->tx_ring[r_idx];
|
|
|
|
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
|
|
(skb->protocol == htons(ETH_P_FCOE)))
|
|
tx_flags |= IXGBE_TX_FLAGS_FCOE;
|
|
|
|
/* four things can cause us to need a context descriptor */
|
|
if (skb_is_gso(skb) ||
|
|
(skb->ip_summed == CHECKSUM_PARTIAL) ||
|
|
(tx_flags & IXGBE_TX_FLAGS_VLAN) ||
|
|
(tx_flags & IXGBE_TX_FLAGS_FCOE))
|
|
count++;
|
|
|
|
count += TXD_USE_COUNT(skb_headlen(skb));
|
|
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
|
|
count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
|
|
|
|
if (ixgbe_maybe_stop_tx(netdev, tx_ring, count)) {
|
|
adapter->tx_busy++;
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
first = tx_ring->next_to_use;
|
|
if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
|
|
#ifdef IXGBE_FCOE
|
|
/* setup tx offload for FCoE */
|
|
tso = ixgbe_fso(adapter, tx_ring, skb, tx_flags, &hdr_len);
|
|
if (tso < 0) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
if (tso)
|
|
tx_flags |= IXGBE_TX_FLAGS_FSO;
|
|
#endif /* IXGBE_FCOE */
|
|
} else {
|
|
if (skb->protocol == htons(ETH_P_IP))
|
|
tx_flags |= IXGBE_TX_FLAGS_IPV4;
|
|
tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
|
|
if (tso < 0) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
if (tso)
|
|
tx_flags |= IXGBE_TX_FLAGS_TSO;
|
|
else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) &&
|
|
(skb->ip_summed == CHECKSUM_PARTIAL))
|
|
tx_flags |= IXGBE_TX_FLAGS_CSUM;
|
|
}
|
|
|
|
count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first);
|
|
if (count) {
|
|
/* add the ATR filter if ATR is on */
|
|
if (tx_ring->atr_sample_rate) {
|
|
++tx_ring->atr_count;
|
|
if ((tx_ring->atr_count >= tx_ring->atr_sample_rate) &&
|
|
test_bit(__IXGBE_FDIR_INIT_DONE,
|
|
&tx_ring->reinit_state)) {
|
|
ixgbe_atr(adapter, skb, tx_ring->queue_index,
|
|
tx_flags);
|
|
tx_ring->atr_count = 0;
|
|
}
|
|
}
|
|
ixgbe_tx_queue(adapter, tx_ring, tx_flags, count, skb->len,
|
|
hdr_len);
|
|
ixgbe_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
|
|
|
|
} else {
|
|
dev_kfree_skb_any(skb);
|
|
tx_ring->tx_buffer_info[first].time_stamp = 0;
|
|
tx_ring->next_to_use = first;
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_stats - Get System Network Statistics
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns the address of the device statistics structure.
|
|
* The statistics are actually updated from the timer callback.
|
|
**/
|
|
static struct net_device_stats *ixgbe_get_stats(struct net_device *netdev)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
/* only return the current stats */
|
|
return &adapter->net_stats;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_mac - Change the Ethernet Address of the NIC
|
|
* @netdev: network interface device structure
|
|
* @p: pointer to an address structure
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
**/
|
|
static int ixgbe_set_mac(struct net_device *netdev, void *p)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct sockaddr *addr = p;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
|
|
memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
|
|
|
|
hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u16 value;
|
|
int rc;
|
|
|
|
if (prtad != hw->phy.mdio.prtad)
|
|
return -EINVAL;
|
|
rc = hw->phy.ops.read_reg(hw, addr, devad, &value);
|
|
if (!rc)
|
|
rc = value;
|
|
return rc;
|
|
}
|
|
|
|
static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad,
|
|
u16 addr, u16 value)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
if (prtad != hw->phy.mdio.prtad)
|
|
return -EINVAL;
|
|
return hw->phy.ops.write_reg(hw, addr, devad, value);
|
|
}
|
|
|
|
static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
|
|
* netdev->dev_addrs
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns non-zero on failure
|
|
**/
|
|
static int ixgbe_add_sanmac_netdev(struct net_device *dev)
|
|
{
|
|
int err = 0;
|
|
struct ixgbe_adapter *adapter = netdev_priv(dev);
|
|
struct ixgbe_mac_info *mac = &adapter->hw.mac;
|
|
|
|
if (is_valid_ether_addr(mac->san_addr)) {
|
|
rtnl_lock();
|
|
err = dev_addr_add(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
|
|
rtnl_unlock();
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
|
|
* netdev->dev_addrs
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns non-zero on failure
|
|
**/
|
|
static int ixgbe_del_sanmac_netdev(struct net_device *dev)
|
|
{
|
|
int err = 0;
|
|
struct ixgbe_adapter *adapter = netdev_priv(dev);
|
|
struct ixgbe_mac_info *mac = &adapter->hw.mac;
|
|
|
|
if (is_valid_ether_addr(mac->san_addr)) {
|
|
rtnl_lock();
|
|
err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
|
|
rtnl_unlock();
|
|
}
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/*
|
|
* Polling 'interrupt' - used by things like netconsole to send skbs
|
|
* without having to re-enable interrupts. It's not called while
|
|
* the interrupt routine is executing.
|
|
*/
|
|
static void ixgbe_netpoll(struct net_device *netdev)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
int i;
|
|
|
|
adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
|
|
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
|
|
int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
|
|
for (i = 0; i < num_q_vectors; i++) {
|
|
struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
|
|
ixgbe_msix_clean_many(0, q_vector);
|
|
}
|
|
} else {
|
|
ixgbe_intr(adapter->pdev->irq, netdev);
|
|
}
|
|
adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
|
|
}
|
|
#endif
|
|
|
|
static const struct net_device_ops ixgbe_netdev_ops = {
|
|
.ndo_open = ixgbe_open,
|
|
.ndo_stop = ixgbe_close,
|
|
.ndo_start_xmit = ixgbe_xmit_frame,
|
|
.ndo_select_queue = ixgbe_select_queue,
|
|
.ndo_get_stats = ixgbe_get_stats,
|
|
.ndo_set_rx_mode = ixgbe_set_rx_mode,
|
|
.ndo_set_multicast_list = ixgbe_set_rx_mode,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = ixgbe_set_mac,
|
|
.ndo_change_mtu = ixgbe_change_mtu,
|
|
.ndo_tx_timeout = ixgbe_tx_timeout,
|
|
.ndo_vlan_rx_register = ixgbe_vlan_rx_register,
|
|
.ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid,
|
|
.ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid,
|
|
.ndo_do_ioctl = ixgbe_ioctl,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = ixgbe_netpoll,
|
|
#endif
|
|
#ifdef IXGBE_FCOE
|
|
.ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get,
|
|
.ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
|
|
.ndo_fcoe_enable = ixgbe_fcoe_enable,
|
|
.ndo_fcoe_disable = ixgbe_fcoe_disable,
|
|
#endif /* IXGBE_FCOE */
|
|
};
|
|
|
|
/**
|
|
* ixgbe_probe - Device Initialization Routine
|
|
* @pdev: PCI device information struct
|
|
* @ent: entry in ixgbe_pci_tbl
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*
|
|
* ixgbe_probe initializes an adapter identified by a pci_dev structure.
|
|
* The OS initialization, configuring of the adapter private structure,
|
|
* and a hardware reset occur.
|
|
**/
|
|
static int __devinit ixgbe_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *netdev;
|
|
struct ixgbe_adapter *adapter = NULL;
|
|
struct ixgbe_hw *hw;
|
|
const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
|
|
static int cards_found;
|
|
int i, err, pci_using_dac;
|
|
#ifdef IXGBE_FCOE
|
|
u16 device_caps;
|
|
#endif
|
|
u32 part_num, eec;
|
|
|
|
err = pci_enable_device_mem(pdev);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
|
|
!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
|
|
pci_using_dac = 1;
|
|
} else {
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
dev_err(&pdev->dev, "No usable DMA "
|
|
"configuration, aborting\n");
|
|
goto err_dma;
|
|
}
|
|
}
|
|
pci_using_dac = 0;
|
|
}
|
|
|
|
err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
|
|
IORESOURCE_MEM), ixgbe_driver_name);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"pci_request_selected_regions failed 0x%x\n", err);
|
|
goto err_pci_reg;
|
|
}
|
|
|
|
err = pci_enable_pcie_error_reporting(pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
|
|
"0x%x\n", err);
|
|
/* non-fatal, continue */
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
pci_save_state(pdev);
|
|
|
|
netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES);
|
|
if (!netdev) {
|
|
err = -ENOMEM;
|
|
goto err_alloc_etherdev;
|
|
}
|
|
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
pci_set_drvdata(pdev, netdev);
|
|
adapter = netdev_priv(netdev);
|
|
|
|
adapter->netdev = netdev;
|
|
adapter->pdev = pdev;
|
|
hw = &adapter->hw;
|
|
hw->back = adapter;
|
|
adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
|
|
|
|
hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
|
|
pci_resource_len(pdev, 0));
|
|
if (!hw->hw_addr) {
|
|
err = -EIO;
|
|
goto err_ioremap;
|
|
}
|
|
|
|
for (i = 1; i <= 5; i++) {
|
|
if (pci_resource_len(pdev, i) == 0)
|
|
continue;
|
|
}
|
|
|
|
netdev->netdev_ops = &ixgbe_netdev_ops;
|
|
ixgbe_set_ethtool_ops(netdev);
|
|
netdev->watchdog_timeo = 5 * HZ;
|
|
strcpy(netdev->name, pci_name(pdev));
|
|
|
|
adapter->bd_number = cards_found;
|
|
|
|
/* Setup hw api */
|
|
memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
|
|
hw->mac.type = ii->mac;
|
|
|
|
/* EEPROM */
|
|
memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops));
|
|
eec = IXGBE_READ_REG(hw, IXGBE_EEC);
|
|
/* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */
|
|
if (!(eec & (1 << 8)))
|
|
hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic;
|
|
|
|
/* PHY */
|
|
memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
|
|
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
|
|
/* ixgbe_identify_phy_generic will set prtad and mmds properly */
|
|
hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
|
|
hw->phy.mdio.mmds = 0;
|
|
hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
|
|
hw->phy.mdio.dev = netdev;
|
|
hw->phy.mdio.mdio_read = ixgbe_mdio_read;
|
|
hw->phy.mdio.mdio_write = ixgbe_mdio_write;
|
|
|
|
/* set up this timer and work struct before calling get_invariants
|
|
* which might start the timer
|
|
*/
|
|
init_timer(&adapter->sfp_timer);
|
|
adapter->sfp_timer.function = &ixgbe_sfp_timer;
|
|
adapter->sfp_timer.data = (unsigned long) adapter;
|
|
|
|
INIT_WORK(&adapter->sfp_task, ixgbe_sfp_task);
|
|
|
|
/* multispeed fiber has its own tasklet, called from GPI SDP1 context */
|
|
INIT_WORK(&adapter->multispeed_fiber_task, ixgbe_multispeed_fiber_task);
|
|
|
|
/* a new SFP+ module arrival, called from GPI SDP2 context */
|
|
INIT_WORK(&adapter->sfp_config_module_task,
|
|
ixgbe_sfp_config_module_task);
|
|
|
|
ii->get_invariants(hw);
|
|
|
|
/* setup the private structure */
|
|
err = ixgbe_sw_init(adapter);
|
|
if (err)
|
|
goto err_sw_init;
|
|
|
|
/*
|
|
* If there is a fan on this device and it has failed log the
|
|
* failure.
|
|
*/
|
|
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
|
|
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
|
|
if (esdp & IXGBE_ESDP_SDP1)
|
|
DPRINTK(PROBE, CRIT,
|
|
"Fan has stopped, replace the adapter\n");
|
|
}
|
|
|
|
/* reset_hw fills in the perm_addr as well */
|
|
err = hw->mac.ops.reset_hw(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
|
|
hw->mac.type == ixgbe_mac_82598EB) {
|
|
/*
|
|
* Start a kernel thread to watch for a module to arrive.
|
|
* Only do this for 82598, since 82599 will generate
|
|
* interrupts on module arrival.
|
|
*/
|
|
set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
|
|
mod_timer(&adapter->sfp_timer,
|
|
round_jiffies(jiffies + (2 * HZ)));
|
|
err = 0;
|
|
} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
dev_err(&adapter->pdev->dev, "failed to initialize because "
|
|
"an unsupported SFP+ module type was detected.\n"
|
|
"Reload the driver after installing a supported "
|
|
"module.\n");
|
|
goto err_sw_init;
|
|
} else if (err) {
|
|
dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
|
|
goto err_sw_init;
|
|
}
|
|
|
|
netdev->features = NETIF_F_SG |
|
|
NETIF_F_IP_CSUM |
|
|
NETIF_F_HW_VLAN_TX |
|
|
NETIF_F_HW_VLAN_RX |
|
|
NETIF_F_HW_VLAN_FILTER;
|
|
|
|
netdev->features |= NETIF_F_IPV6_CSUM;
|
|
netdev->features |= NETIF_F_TSO;
|
|
netdev->features |= NETIF_F_TSO6;
|
|
netdev->features |= NETIF_F_GRO;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB)
|
|
netdev->features |= NETIF_F_SCTP_CSUM;
|
|
|
|
netdev->vlan_features |= NETIF_F_TSO;
|
|
netdev->vlan_features |= NETIF_F_TSO6;
|
|
netdev->vlan_features |= NETIF_F_IP_CSUM;
|
|
netdev->vlan_features |= NETIF_F_IPV6_CSUM;
|
|
netdev->vlan_features |= NETIF_F_SG;
|
|
|
|
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
|
|
adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
|
|
|
|
#ifdef CONFIG_IXGBE_DCB
|
|
netdev->dcbnl_ops = &dcbnl_ops;
|
|
#endif
|
|
|
|
#ifdef IXGBE_FCOE
|
|
if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
|
|
if (hw->mac.ops.get_device_caps) {
|
|
hw->mac.ops.get_device_caps(hw, &device_caps);
|
|
if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
|
|
adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
|
|
}
|
|
}
|
|
#endif /* IXGBE_FCOE */
|
|
if (pci_using_dac)
|
|
netdev->features |= NETIF_F_HIGHDMA;
|
|
|
|
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
|
|
netdev->features |= NETIF_F_LRO;
|
|
|
|
/* make sure the EEPROM is good */
|
|
if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
|
|
dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
|
|
err = -EIO;
|
|
goto err_eeprom;
|
|
}
|
|
|
|
memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len);
|
|
memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
|
|
|
|
if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
|
|
dev_err(&pdev->dev, "invalid MAC address\n");
|
|
err = -EIO;
|
|
goto err_eeprom;
|
|
}
|
|
|
|
init_timer(&adapter->watchdog_timer);
|
|
adapter->watchdog_timer.function = &ixgbe_watchdog;
|
|
adapter->watchdog_timer.data = (unsigned long)adapter;
|
|
|
|
INIT_WORK(&adapter->reset_task, ixgbe_reset_task);
|
|
INIT_WORK(&adapter->watchdog_task, ixgbe_watchdog_task);
|
|
|
|
err = ixgbe_init_interrupt_scheme(adapter);
|
|
if (err)
|
|
goto err_sw_init;
|
|
|
|
switch (pdev->device) {
|
|
case IXGBE_DEV_ID_82599_KX4:
|
|
adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
|
|
IXGBE_WUFC_MC | IXGBE_WUFC_BC);
|
|
/* Enable ACPI wakeup in GRC */
|
|
IXGBE_WRITE_REG(hw, IXGBE_GRC,
|
|
(IXGBE_READ_REG(hw, IXGBE_GRC) & ~IXGBE_GRC_APME));
|
|
break;
|
|
default:
|
|
adapter->wol = 0;
|
|
break;
|
|
}
|
|
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
|
|
|
|
/* pick up the PCI bus settings for reporting later */
|
|
hw->mac.ops.get_bus_info(hw);
|
|
|
|
/* print bus type/speed/width info */
|
|
dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n",
|
|
((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s":
|
|
(hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5Gb/s":"Unknown"),
|
|
((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" :
|
|
(hw->bus.width == ixgbe_bus_width_pcie_x4) ? "Width x4" :
|
|
(hw->bus.width == ixgbe_bus_width_pcie_x1) ? "Width x1" :
|
|
"Unknown"),
|
|
netdev->dev_addr);
|
|
ixgbe_read_pba_num_generic(hw, &part_num);
|
|
if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
|
|
dev_info(&pdev->dev, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %06x-%03x\n",
|
|
hw->mac.type, hw->phy.type, hw->phy.sfp_type,
|
|
(part_num >> 8), (part_num & 0xff));
|
|
else
|
|
dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
|
|
hw->mac.type, hw->phy.type,
|
|
(part_num >> 8), (part_num & 0xff));
|
|
|
|
if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
|
|
dev_warn(&pdev->dev, "PCI-Express bandwidth available for "
|
|
"this card is not sufficient for optimal "
|
|
"performance.\n");
|
|
dev_warn(&pdev->dev, "For optimal performance a x8 "
|
|
"PCI-Express slot is required.\n");
|
|
}
|
|
|
|
/* save off EEPROM version number */
|
|
hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version);
|
|
|
|
/* reset the hardware with the new settings */
|
|
err = hw->mac.ops.start_hw(hw);
|
|
|
|
if (err == IXGBE_ERR_EEPROM_VERSION) {
|
|
/* We are running on a pre-production device, log a warning */
|
|
dev_warn(&pdev->dev, "This device is a pre-production "
|
|
"adapter/LOM. Please be aware there may be issues "
|
|
"associated with your hardware. If you are "
|
|
"experiencing problems please contact your Intel or "
|
|
"hardware representative who provided you with this "
|
|
"hardware.\n");
|
|
}
|
|
strcpy(netdev->name, "eth%d");
|
|
err = register_netdev(netdev);
|
|
if (err)
|
|
goto err_register;
|
|
|
|
/* carrier off reporting is important to ethtool even BEFORE open */
|
|
netif_carrier_off(netdev);
|
|
|
|
if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
|
|
adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
|
|
INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task);
|
|
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
if (dca_add_requester(&pdev->dev) == 0) {
|
|
adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
|
|
ixgbe_setup_dca(adapter);
|
|
}
|
|
#endif
|
|
/* add san mac addr to netdev */
|
|
ixgbe_add_sanmac_netdev(netdev);
|
|
|
|
dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n");
|
|
cards_found++;
|
|
return 0;
|
|
|
|
err_register:
|
|
ixgbe_release_hw_control(adapter);
|
|
ixgbe_clear_interrupt_scheme(adapter);
|
|
err_sw_init:
|
|
err_eeprom:
|
|
clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
|
|
del_timer_sync(&adapter->sfp_timer);
|
|
cancel_work_sync(&adapter->sfp_task);
|
|
cancel_work_sync(&adapter->multispeed_fiber_task);
|
|
cancel_work_sync(&adapter->sfp_config_module_task);
|
|
iounmap(hw->hw_addr);
|
|
err_ioremap:
|
|
free_netdev(netdev);
|
|
err_alloc_etherdev:
|
|
pci_release_selected_regions(pdev, pci_select_bars(pdev,
|
|
IORESOURCE_MEM));
|
|
err_pci_reg:
|
|
err_dma:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_remove - Device Removal Routine
|
|
* @pdev: PCI device information struct
|
|
*
|
|
* ixgbe_remove is called by the PCI subsystem to alert the driver
|
|
* that it should release a PCI device. The could be caused by a
|
|
* Hot-Plug event, or because the driver is going to be removed from
|
|
* memory.
|
|
**/
|
|
static void __devexit ixgbe_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
int err;
|
|
|
|
set_bit(__IXGBE_DOWN, &adapter->state);
|
|
/* clear the module not found bit to make sure the worker won't
|
|
* reschedule
|
|
*/
|
|
clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
|
|
del_timer_sync(&adapter->watchdog_timer);
|
|
|
|
del_timer_sync(&adapter->sfp_timer);
|
|
cancel_work_sync(&adapter->watchdog_task);
|
|
cancel_work_sync(&adapter->sfp_task);
|
|
cancel_work_sync(&adapter->multispeed_fiber_task);
|
|
cancel_work_sync(&adapter->sfp_config_module_task);
|
|
if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
|
|
adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
|
|
cancel_work_sync(&adapter->fdir_reinit_task);
|
|
flush_scheduled_work();
|
|
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
|
|
adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
|
|
dca_remove_requester(&pdev->dev);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
|
|
}
|
|
|
|
#endif
|
|
#ifdef IXGBE_FCOE
|
|
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
|
|
ixgbe_cleanup_fcoe(adapter);
|
|
|
|
#endif /* IXGBE_FCOE */
|
|
|
|
/* remove the added san mac */
|
|
ixgbe_del_sanmac_netdev(netdev);
|
|
|
|
if (netdev->reg_state == NETREG_REGISTERED)
|
|
unregister_netdev(netdev);
|
|
|
|
ixgbe_clear_interrupt_scheme(adapter);
|
|
|
|
ixgbe_release_hw_control(adapter);
|
|
|
|
iounmap(adapter->hw.hw_addr);
|
|
pci_release_selected_regions(pdev, pci_select_bars(pdev,
|
|
IORESOURCE_MEM));
|
|
|
|
DPRINTK(PROBE, INFO, "complete\n");
|
|
|
|
free_netdev(netdev);
|
|
|
|
err = pci_disable_pcie_error_reporting(pdev);
|
|
if (err)
|
|
dev_err(&pdev->dev,
|
|
"pci_disable_pcie_error_reporting failed 0x%x\n", err);
|
|
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_io_error_detected - called when PCI error is detected
|
|
* @pdev: Pointer to PCI device
|
|
* @state: The current pci connection state
|
|
*
|
|
* This function is called after a PCI bus error affecting
|
|
* this device has been detected.
|
|
*/
|
|
static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
|
|
pci_channel_state_t state)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
netif_device_detach(netdev);
|
|
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
if (netif_running(netdev))
|
|
ixgbe_down(adapter);
|
|
pci_disable_device(pdev);
|
|
|
|
/* Request a slot reset. */
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_io_slot_reset - called after the pci bus has been reset.
|
|
* @pdev: Pointer to PCI device
|
|
*
|
|
* Restart the card from scratch, as if from a cold-boot.
|
|
*/
|
|
static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
pci_ers_result_t result;
|
|
int err;
|
|
|
|
if (pci_enable_device_mem(pdev)) {
|
|
DPRINTK(PROBE, ERR,
|
|
"Cannot re-enable PCI device after reset.\n");
|
|
result = PCI_ERS_RESULT_DISCONNECT;
|
|
} else {
|
|
pci_set_master(pdev);
|
|
pci_restore_state(pdev);
|
|
|
|
pci_wake_from_d3(pdev, false);
|
|
|
|
ixgbe_reset(adapter);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
|
|
result = PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
err = pci_cleanup_aer_uncorrect_error_status(pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n", err);
|
|
/* non-fatal, continue */
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_io_resume - called when traffic can start flowing again.
|
|
* @pdev: Pointer to PCI device
|
|
*
|
|
* This callback is called when the error recovery driver tells us that
|
|
* its OK to resume normal operation.
|
|
*/
|
|
static void ixgbe_io_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (netif_running(netdev)) {
|
|
if (ixgbe_up(adapter)) {
|
|
DPRINTK(PROBE, INFO, "ixgbe_up failed after reset\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
netif_device_attach(netdev);
|
|
}
|
|
|
|
static struct pci_error_handlers ixgbe_err_handler = {
|
|
.error_detected = ixgbe_io_error_detected,
|
|
.slot_reset = ixgbe_io_slot_reset,
|
|
.resume = ixgbe_io_resume,
|
|
};
|
|
|
|
static struct pci_driver ixgbe_driver = {
|
|
.name = ixgbe_driver_name,
|
|
.id_table = ixgbe_pci_tbl,
|
|
.probe = ixgbe_probe,
|
|
.remove = __devexit_p(ixgbe_remove),
|
|
#ifdef CONFIG_PM
|
|
.suspend = ixgbe_suspend,
|
|
.resume = ixgbe_resume,
|
|
#endif
|
|
.shutdown = ixgbe_shutdown,
|
|
.err_handler = &ixgbe_err_handler
|
|
};
|
|
|
|
/**
|
|
* ixgbe_init_module - Driver Registration Routine
|
|
*
|
|
* ixgbe_init_module is the first routine called when the driver is
|
|
* loaded. All it does is register with the PCI subsystem.
|
|
**/
|
|
static int __init ixgbe_init_module(void)
|
|
{
|
|
int ret;
|
|
printk(KERN_INFO "%s: %s - version %s\n", ixgbe_driver_name,
|
|
ixgbe_driver_string, ixgbe_driver_version);
|
|
|
|
printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright);
|
|
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
dca_register_notify(&dca_notifier);
|
|
#endif
|
|
|
|
ret = pci_register_driver(&ixgbe_driver);
|
|
return ret;
|
|
}
|
|
|
|
module_init(ixgbe_init_module);
|
|
|
|
/**
|
|
* ixgbe_exit_module - Driver Exit Cleanup Routine
|
|
*
|
|
* ixgbe_exit_module is called just before the driver is removed
|
|
* from memory.
|
|
**/
|
|
static void __exit ixgbe_exit_module(void)
|
|
{
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
dca_unregister_notify(&dca_notifier);
|
|
#endif
|
|
pci_unregister_driver(&ixgbe_driver);
|
|
}
|
|
|
|
#ifdef CONFIG_IXGBE_DCA
|
|
static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
|
|
void *p)
|
|
{
|
|
int ret_val;
|
|
|
|
ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event,
|
|
__ixgbe_notify_dca);
|
|
|
|
return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
|
|
}
|
|
|
|
#endif /* CONFIG_IXGBE_DCA */
|
|
#ifdef DEBUG
|
|
/**
|
|
* ixgbe_get_hw_dev_name - return device name string
|
|
* used by hardware layer to print debugging information
|
|
**/
|
|
char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw)
|
|
{
|
|
struct ixgbe_adapter *adapter = hw->back;
|
|
return adapter->netdev->name;
|
|
}
|
|
|
|
#endif
|
|
module_exit(ixgbe_exit_module);
|
|
|
|
/* ixgbe_main.c */
|