601 lines
15 KiB
C
601 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* MediaTek USB3.1 gen2 xsphy Driver
|
|
*
|
|
* Copyright (c) 2018 MediaTek Inc.
|
|
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/* u2 phy banks */
|
|
#define SSUSB_SIFSLV_MISC 0x000
|
|
#define SSUSB_SIFSLV_U2FREQ 0x100
|
|
#define SSUSB_SIFSLV_U2PHY_COM 0x300
|
|
|
|
/* u3 phy shared banks */
|
|
#define SSPXTP_SIFSLV_DIG_GLB 0x000
|
|
#define SSPXTP_SIFSLV_PHYA_GLB 0x100
|
|
|
|
/* u3 phy banks */
|
|
#define SSPXTP_SIFSLV_DIG_LN_TOP 0x000
|
|
#define SSPXTP_SIFSLV_DIG_LN_TX0 0x100
|
|
#define SSPXTP_SIFSLV_DIG_LN_RX0 0x200
|
|
#define SSPXTP_SIFSLV_DIG_LN_DAIF 0x300
|
|
#define SSPXTP_SIFSLV_PHYA_LN 0x400
|
|
|
|
#define XSP_U2FREQ_FMCR0 ((SSUSB_SIFSLV_U2FREQ) + 0x00)
|
|
#define P2F_RG_FREQDET_EN BIT(24)
|
|
#define P2F_RG_CYCLECNT GENMASK(23, 0)
|
|
#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x))
|
|
|
|
#define XSP_U2FREQ_MMONR0 ((SSUSB_SIFSLV_U2FREQ) + 0x0c)
|
|
|
|
#define XSP_U2FREQ_FMMONR1 ((SSUSB_SIFSLV_U2FREQ) + 0x10)
|
|
#define P2F_RG_FRCK_EN BIT(8)
|
|
#define P2F_USB_FM_VALID BIT(0)
|
|
|
|
#define XSP_USBPHYACR0 ((SSUSB_SIFSLV_U2PHY_COM) + 0x00)
|
|
#define P2A0_RG_INTR_EN BIT(5)
|
|
|
|
#define XSP_USBPHYACR1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x04)
|
|
#define P2A1_RG_INTR_CAL GENMASK(23, 19)
|
|
#define P2A1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19)
|
|
#define P2A1_RG_VRT_SEL GENMASK(14, 12)
|
|
#define P2A1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12)
|
|
#define P2A1_RG_TERM_SEL GENMASK(10, 8)
|
|
#define P2A1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8)
|
|
|
|
#define XSP_USBPHYACR5 ((SSUSB_SIFSLV_U2PHY_COM) + 0x014)
|
|
#define P2A5_RG_HSTX_SRCAL_EN BIT(15)
|
|
#define P2A5_RG_HSTX_SRCTRL GENMASK(14, 12)
|
|
#define P2A5_RG_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
|
|
|
|
#define XSP_USBPHYACR6 ((SSUSB_SIFSLV_U2PHY_COM) + 0x018)
|
|
#define P2A6_RG_BC11_SW_EN BIT(23)
|
|
#define P2A6_RG_OTG_VBUSCMP_EN BIT(20)
|
|
|
|
#define XSP_U2PHYDTM1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x06C)
|
|
#define P2D_FORCE_IDDIG BIT(9)
|
|
#define P2D_RG_VBUSVALID BIT(5)
|
|
#define P2D_RG_SESSEND BIT(4)
|
|
#define P2D_RG_AVALID BIT(2)
|
|
#define P2D_RG_IDDIG BIT(1)
|
|
|
|
#define SSPXTP_PHYA_GLB_00 ((SSPXTP_SIFSLV_PHYA_GLB) + 0x00)
|
|
#define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(21, 16)
|
|
#define RG_XTP_GLB_BIAS_INTR_CTRL_VAL(x) ((0x3f & (x)) << 16)
|
|
|
|
#define SSPXTP_PHYA_LN_04 ((SSPXTP_SIFSLV_PHYA_LN) + 0x04)
|
|
#define RG_XTP_LN0_TX_IMPSEL GENMASK(4, 0)
|
|
#define RG_XTP_LN0_TX_IMPSEL_VAL(x) (0x1f & (x))
|
|
|
|
#define SSPXTP_PHYA_LN_14 ((SSPXTP_SIFSLV_PHYA_LN) + 0x014)
|
|
#define RG_XTP_LN0_RX_IMPSEL GENMASK(4, 0)
|
|
#define RG_XTP_LN0_RX_IMPSEL_VAL(x) (0x1f & (x))
|
|
|
|
#define XSP_REF_CLK 26 /* MHZ */
|
|
#define XSP_SLEW_RATE_COEF 17
|
|
#define XSP_SR_COEF_DIVISOR 1000
|
|
#define XSP_FM_DET_CYCLE_CNT 1024
|
|
|
|
struct xsphy_instance {
|
|
struct phy *phy;
|
|
void __iomem *port_base;
|
|
struct clk *ref_clk; /* reference clock of anolog phy */
|
|
u32 index;
|
|
u32 type;
|
|
/* only for HQA test */
|
|
int efuse_intr;
|
|
int efuse_tx_imp;
|
|
int efuse_rx_imp;
|
|
/* u2 eye diagram */
|
|
int eye_src;
|
|
int eye_vrt;
|
|
int eye_term;
|
|
};
|
|
|
|
struct mtk_xsphy {
|
|
struct device *dev;
|
|
void __iomem *glb_base; /* only shared u3 sif */
|
|
struct xsphy_instance **phys;
|
|
int nphys;
|
|
int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
|
|
int src_coef; /* coefficient for slew rate calibrate */
|
|
};
|
|
|
|
static void u2_phy_slew_rate_calibrate(struct mtk_xsphy *xsphy,
|
|
struct xsphy_instance *inst)
|
|
{
|
|
void __iomem *pbase = inst->port_base;
|
|
int calib_val;
|
|
int fm_out;
|
|
u32 tmp;
|
|
|
|
/* use force value */
|
|
if (inst->eye_src)
|
|
return;
|
|
|
|
/* enable USB ring oscillator */
|
|
tmp = readl(pbase + XSP_USBPHYACR5);
|
|
tmp |= P2A5_RG_HSTX_SRCAL_EN;
|
|
writel(tmp, pbase + XSP_USBPHYACR5);
|
|
udelay(1); /* wait clock stable */
|
|
|
|
/* enable free run clock */
|
|
tmp = readl(pbase + XSP_U2FREQ_FMMONR1);
|
|
tmp |= P2F_RG_FRCK_EN;
|
|
writel(tmp, pbase + XSP_U2FREQ_FMMONR1);
|
|
|
|
/* set cycle count as 1024 */
|
|
tmp = readl(pbase + XSP_U2FREQ_FMCR0);
|
|
tmp &= ~(P2F_RG_CYCLECNT);
|
|
tmp |= P2F_RG_CYCLECNT_VAL(XSP_FM_DET_CYCLE_CNT);
|
|
writel(tmp, pbase + XSP_U2FREQ_FMCR0);
|
|
|
|
/* enable frequency meter */
|
|
tmp = readl(pbase + XSP_U2FREQ_FMCR0);
|
|
tmp |= P2F_RG_FREQDET_EN;
|
|
writel(tmp, pbase + XSP_U2FREQ_FMCR0);
|
|
|
|
/* ignore return value */
|
|
readl_poll_timeout(pbase + XSP_U2FREQ_FMMONR1, tmp,
|
|
(tmp & P2F_USB_FM_VALID), 10, 200);
|
|
|
|
fm_out = readl(pbase + XSP_U2FREQ_MMONR0);
|
|
|
|
/* disable frequency meter */
|
|
tmp = readl(pbase + XSP_U2FREQ_FMCR0);
|
|
tmp &= ~P2F_RG_FREQDET_EN;
|
|
writel(tmp, pbase + XSP_U2FREQ_FMCR0);
|
|
|
|
/* disable free run clock */
|
|
tmp = readl(pbase + XSP_U2FREQ_FMMONR1);
|
|
tmp &= ~P2F_RG_FRCK_EN;
|
|
writel(tmp, pbase + XSP_U2FREQ_FMMONR1);
|
|
|
|
if (fm_out) {
|
|
/* (1024 / FM_OUT) x reference clock frequency x coefficient */
|
|
tmp = xsphy->src_ref_clk * xsphy->src_coef;
|
|
tmp = (tmp * XSP_FM_DET_CYCLE_CNT) / fm_out;
|
|
calib_val = DIV_ROUND_CLOSEST(tmp, XSP_SR_COEF_DIVISOR);
|
|
} else {
|
|
/* if FM detection fail, set default value */
|
|
calib_val = 3;
|
|
}
|
|
dev_dbg(xsphy->dev, "phy.%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n",
|
|
inst->index, fm_out, calib_val,
|
|
xsphy->src_ref_clk, xsphy->src_coef);
|
|
|
|
/* set HS slew rate */
|
|
tmp = readl(pbase + XSP_USBPHYACR5);
|
|
tmp &= ~P2A5_RG_HSTX_SRCTRL;
|
|
tmp |= P2A5_RG_HSTX_SRCTRL_VAL(calib_val);
|
|
writel(tmp, pbase + XSP_USBPHYACR5);
|
|
|
|
/* disable USB ring oscillator */
|
|
tmp = readl(pbase + XSP_USBPHYACR5);
|
|
tmp &= ~P2A5_RG_HSTX_SRCAL_EN;
|
|
writel(tmp, pbase + XSP_USBPHYACR5);
|
|
}
|
|
|
|
static void u2_phy_instance_init(struct mtk_xsphy *xsphy,
|
|
struct xsphy_instance *inst)
|
|
{
|
|
void __iomem *pbase = inst->port_base;
|
|
u32 tmp;
|
|
|
|
/* DP/DM BC1.1 path Disable */
|
|
tmp = readl(pbase + XSP_USBPHYACR6);
|
|
tmp &= ~P2A6_RG_BC11_SW_EN;
|
|
writel(tmp, pbase + XSP_USBPHYACR6);
|
|
|
|
tmp = readl(pbase + XSP_USBPHYACR0);
|
|
tmp |= P2A0_RG_INTR_EN;
|
|
writel(tmp, pbase + XSP_USBPHYACR0);
|
|
}
|
|
|
|
static void u2_phy_instance_power_on(struct mtk_xsphy *xsphy,
|
|
struct xsphy_instance *inst)
|
|
{
|
|
void __iomem *pbase = inst->port_base;
|
|
u32 index = inst->index;
|
|
u32 tmp;
|
|
|
|
tmp = readl(pbase + XSP_USBPHYACR6);
|
|
tmp |= P2A6_RG_OTG_VBUSCMP_EN;
|
|
writel(tmp, pbase + XSP_USBPHYACR6);
|
|
|
|
tmp = readl(pbase + XSP_U2PHYDTM1);
|
|
tmp |= P2D_RG_VBUSVALID | P2D_RG_AVALID;
|
|
tmp &= ~P2D_RG_SESSEND;
|
|
writel(tmp, pbase + XSP_U2PHYDTM1);
|
|
|
|
dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index);
|
|
}
|
|
|
|
static void u2_phy_instance_power_off(struct mtk_xsphy *xsphy,
|
|
struct xsphy_instance *inst)
|
|
{
|
|
void __iomem *pbase = inst->port_base;
|
|
u32 index = inst->index;
|
|
u32 tmp;
|
|
|
|
tmp = readl(pbase + XSP_USBPHYACR6);
|
|
tmp &= ~P2A6_RG_OTG_VBUSCMP_EN;
|
|
writel(tmp, pbase + XSP_USBPHYACR6);
|
|
|
|
tmp = readl(pbase + XSP_U2PHYDTM1);
|
|
tmp &= ~(P2D_RG_VBUSVALID | P2D_RG_AVALID);
|
|
tmp |= P2D_RG_SESSEND;
|
|
writel(tmp, pbase + XSP_U2PHYDTM1);
|
|
|
|
dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index);
|
|
}
|
|
|
|
static void u2_phy_instance_set_mode(struct mtk_xsphy *xsphy,
|
|
struct xsphy_instance *inst,
|
|
enum phy_mode mode)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = readl(inst->port_base + XSP_U2PHYDTM1);
|
|
switch (mode) {
|
|
case PHY_MODE_USB_DEVICE:
|
|
tmp |= P2D_FORCE_IDDIG | P2D_RG_IDDIG;
|
|
break;
|
|
case PHY_MODE_USB_HOST:
|
|
tmp |= P2D_FORCE_IDDIG;
|
|
tmp &= ~P2D_RG_IDDIG;
|
|
break;
|
|
case PHY_MODE_USB_OTG:
|
|
tmp &= ~(P2D_FORCE_IDDIG | P2D_RG_IDDIG);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
writel(tmp, inst->port_base + XSP_U2PHYDTM1);
|
|
}
|
|
|
|
static void phy_parse_property(struct mtk_xsphy *xsphy,
|
|
struct xsphy_instance *inst)
|
|
{
|
|
struct device *dev = &inst->phy->dev;
|
|
|
|
switch (inst->type) {
|
|
case PHY_TYPE_USB2:
|
|
device_property_read_u32(dev, "mediatek,efuse-intr",
|
|
&inst->efuse_intr);
|
|
device_property_read_u32(dev, "mediatek,eye-src",
|
|
&inst->eye_src);
|
|
device_property_read_u32(dev, "mediatek,eye-vrt",
|
|
&inst->eye_vrt);
|
|
device_property_read_u32(dev, "mediatek,eye-term",
|
|
&inst->eye_term);
|
|
dev_dbg(dev, "intr:%d, src:%d, vrt:%d, term:%d\n",
|
|
inst->efuse_intr, inst->eye_src,
|
|
inst->eye_vrt, inst->eye_term);
|
|
break;
|
|
case PHY_TYPE_USB3:
|
|
device_property_read_u32(dev, "mediatek,efuse-intr",
|
|
&inst->efuse_intr);
|
|
device_property_read_u32(dev, "mediatek,efuse-tx-imp",
|
|
&inst->efuse_tx_imp);
|
|
device_property_read_u32(dev, "mediatek,efuse-rx-imp",
|
|
&inst->efuse_rx_imp);
|
|
dev_dbg(dev, "intr:%d, tx-imp:%d, rx-imp:%d\n",
|
|
inst->efuse_intr, inst->efuse_tx_imp,
|
|
inst->efuse_rx_imp);
|
|
break;
|
|
default:
|
|
dev_err(xsphy->dev, "incompatible phy type\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void u2_phy_props_set(struct mtk_xsphy *xsphy,
|
|
struct xsphy_instance *inst)
|
|
{
|
|
void __iomem *pbase = inst->port_base;
|
|
u32 tmp;
|
|
|
|
if (inst->efuse_intr) {
|
|
tmp = readl(pbase + XSP_USBPHYACR1);
|
|
tmp &= ~P2A1_RG_INTR_CAL;
|
|
tmp |= P2A1_RG_INTR_CAL_VAL(inst->efuse_intr);
|
|
writel(tmp, pbase + XSP_USBPHYACR1);
|
|
}
|
|
|
|
if (inst->eye_src) {
|
|
tmp = readl(pbase + XSP_USBPHYACR5);
|
|
tmp &= ~P2A5_RG_HSTX_SRCTRL;
|
|
tmp |= P2A5_RG_HSTX_SRCTRL_VAL(inst->eye_src);
|
|
writel(tmp, pbase + XSP_USBPHYACR5);
|
|
}
|
|
|
|
if (inst->eye_vrt) {
|
|
tmp = readl(pbase + XSP_USBPHYACR1);
|
|
tmp &= ~P2A1_RG_VRT_SEL;
|
|
tmp |= P2A1_RG_VRT_SEL_VAL(inst->eye_vrt);
|
|
writel(tmp, pbase + XSP_USBPHYACR1);
|
|
}
|
|
|
|
if (inst->eye_term) {
|
|
tmp = readl(pbase + XSP_USBPHYACR1);
|
|
tmp &= ~P2A1_RG_TERM_SEL;
|
|
tmp |= P2A1_RG_TERM_SEL_VAL(inst->eye_term);
|
|
writel(tmp, pbase + XSP_USBPHYACR1);
|
|
}
|
|
}
|
|
|
|
static void u3_phy_props_set(struct mtk_xsphy *xsphy,
|
|
struct xsphy_instance *inst)
|
|
{
|
|
void __iomem *pbase = inst->port_base;
|
|
u32 tmp;
|
|
|
|
if (inst->efuse_intr) {
|
|
tmp = readl(xsphy->glb_base + SSPXTP_PHYA_GLB_00);
|
|
tmp &= ~RG_XTP_GLB_BIAS_INTR_CTRL;
|
|
tmp |= RG_XTP_GLB_BIAS_INTR_CTRL_VAL(inst->efuse_intr);
|
|
writel(tmp, xsphy->glb_base + SSPXTP_PHYA_GLB_00);
|
|
}
|
|
|
|
if (inst->efuse_tx_imp) {
|
|
tmp = readl(pbase + SSPXTP_PHYA_LN_04);
|
|
tmp &= ~RG_XTP_LN0_TX_IMPSEL;
|
|
tmp |= RG_XTP_LN0_TX_IMPSEL_VAL(inst->efuse_tx_imp);
|
|
writel(tmp, pbase + SSPXTP_PHYA_LN_04);
|
|
}
|
|
|
|
if (inst->efuse_rx_imp) {
|
|
tmp = readl(pbase + SSPXTP_PHYA_LN_14);
|
|
tmp &= ~RG_XTP_LN0_RX_IMPSEL;
|
|
tmp |= RG_XTP_LN0_RX_IMPSEL_VAL(inst->efuse_rx_imp);
|
|
writel(tmp, pbase + SSPXTP_PHYA_LN_14);
|
|
}
|
|
}
|
|
|
|
static int mtk_phy_init(struct phy *phy)
|
|
{
|
|
struct xsphy_instance *inst = phy_get_drvdata(phy);
|
|
struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(inst->ref_clk);
|
|
if (ret) {
|
|
dev_err(xsphy->dev, "failed to enable ref_clk\n");
|
|
return ret;
|
|
}
|
|
|
|
switch (inst->type) {
|
|
case PHY_TYPE_USB2:
|
|
u2_phy_instance_init(xsphy, inst);
|
|
u2_phy_props_set(xsphy, inst);
|
|
break;
|
|
case PHY_TYPE_USB3:
|
|
u3_phy_props_set(xsphy, inst);
|
|
break;
|
|
default:
|
|
dev_err(xsphy->dev, "incompatible phy type\n");
|
|
clk_disable_unprepare(inst->ref_clk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_phy_power_on(struct phy *phy)
|
|
{
|
|
struct xsphy_instance *inst = phy_get_drvdata(phy);
|
|
struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent);
|
|
|
|
if (inst->type == PHY_TYPE_USB2) {
|
|
u2_phy_instance_power_on(xsphy, inst);
|
|
u2_phy_slew_rate_calibrate(xsphy, inst);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_phy_power_off(struct phy *phy)
|
|
{
|
|
struct xsphy_instance *inst = phy_get_drvdata(phy);
|
|
struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent);
|
|
|
|
if (inst->type == PHY_TYPE_USB2)
|
|
u2_phy_instance_power_off(xsphy, inst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_phy_exit(struct phy *phy)
|
|
{
|
|
struct xsphy_instance *inst = phy_get_drvdata(phy);
|
|
|
|
clk_disable_unprepare(inst->ref_clk);
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode)
|
|
{
|
|
struct xsphy_instance *inst = phy_get_drvdata(phy);
|
|
struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent);
|
|
|
|
if (inst->type == PHY_TYPE_USB2)
|
|
u2_phy_instance_set_mode(xsphy, inst, mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy *mtk_phy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct mtk_xsphy *xsphy = dev_get_drvdata(dev);
|
|
struct xsphy_instance *inst = NULL;
|
|
struct device_node *phy_np = args->np;
|
|
int index;
|
|
|
|
if (args->args_count != 1) {
|
|
dev_err(dev, "invalid number of cells in 'phy' property\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
for (index = 0; index < xsphy->nphys; index++)
|
|
if (phy_np == xsphy->phys[index]->phy->dev.of_node) {
|
|
inst = xsphy->phys[index];
|
|
break;
|
|
}
|
|
|
|
if (!inst) {
|
|
dev_err(dev, "failed to find appropriate phy\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
inst->type = args->args[0];
|
|
if (!(inst->type == PHY_TYPE_USB2 ||
|
|
inst->type == PHY_TYPE_USB3)) {
|
|
dev_err(dev, "unsupported phy type: %d\n", inst->type);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
phy_parse_property(xsphy, inst);
|
|
|
|
return inst->phy;
|
|
}
|
|
|
|
static const struct phy_ops mtk_xsphy_ops = {
|
|
.init = mtk_phy_init,
|
|
.exit = mtk_phy_exit,
|
|
.power_on = mtk_phy_power_on,
|
|
.power_off = mtk_phy_power_off,
|
|
.set_mode = mtk_phy_set_mode,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id mtk_xsphy_id_table[] = {
|
|
{ .compatible = "mediatek,xsphy", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mtk_xsphy_id_table);
|
|
|
|
static int mtk_xsphy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct device_node *child_np;
|
|
struct phy_provider *provider;
|
|
struct resource *glb_res;
|
|
struct mtk_xsphy *xsphy;
|
|
struct resource res;
|
|
int port, retval;
|
|
|
|
xsphy = devm_kzalloc(dev, sizeof(*xsphy), GFP_KERNEL);
|
|
if (!xsphy)
|
|
return -ENOMEM;
|
|
|
|
xsphy->nphys = of_get_child_count(np);
|
|
xsphy->phys = devm_kcalloc(dev, xsphy->nphys,
|
|
sizeof(*xsphy->phys), GFP_KERNEL);
|
|
if (!xsphy->phys)
|
|
return -ENOMEM;
|
|
|
|
xsphy->dev = dev;
|
|
platform_set_drvdata(pdev, xsphy);
|
|
|
|
glb_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
/* optional, may not exist if no u3 phys */
|
|
if (glb_res) {
|
|
/* get banks shared by multiple u3 phys */
|
|
xsphy->glb_base = devm_ioremap_resource(dev, glb_res);
|
|
if (IS_ERR(xsphy->glb_base)) {
|
|
dev_err(dev, "failed to remap glb regs\n");
|
|
return PTR_ERR(xsphy->glb_base);
|
|
}
|
|
}
|
|
|
|
xsphy->src_ref_clk = XSP_REF_CLK;
|
|
xsphy->src_coef = XSP_SLEW_RATE_COEF;
|
|
/* update parameters of slew rate calibrate if exist */
|
|
device_property_read_u32(dev, "mediatek,src-ref-clk-mhz",
|
|
&xsphy->src_ref_clk);
|
|
device_property_read_u32(dev, "mediatek,src-coef", &xsphy->src_coef);
|
|
|
|
port = 0;
|
|
for_each_child_of_node(np, child_np) {
|
|
struct xsphy_instance *inst;
|
|
struct phy *phy;
|
|
|
|
inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL);
|
|
if (!inst) {
|
|
retval = -ENOMEM;
|
|
goto put_child;
|
|
}
|
|
|
|
xsphy->phys[port] = inst;
|
|
|
|
phy = devm_phy_create(dev, child_np, &mtk_xsphy_ops);
|
|
if (IS_ERR(phy)) {
|
|
dev_err(dev, "failed to create phy\n");
|
|
retval = PTR_ERR(phy);
|
|
goto put_child;
|
|
}
|
|
|
|
retval = of_address_to_resource(child_np, 0, &res);
|
|
if (retval) {
|
|
dev_err(dev, "failed to get address resource(id-%d)\n",
|
|
port);
|
|
goto put_child;
|
|
}
|
|
|
|
inst->port_base = devm_ioremap_resource(&phy->dev, &res);
|
|
if (IS_ERR(inst->port_base)) {
|
|
dev_err(dev, "failed to remap phy regs\n");
|
|
retval = PTR_ERR(inst->port_base);
|
|
goto put_child;
|
|
}
|
|
|
|
inst->phy = phy;
|
|
inst->index = port;
|
|
phy_set_drvdata(phy, inst);
|
|
port++;
|
|
|
|
inst->ref_clk = devm_clk_get(&phy->dev, "ref");
|
|
if (IS_ERR(inst->ref_clk)) {
|
|
dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
|
|
retval = PTR_ERR(inst->ref_clk);
|
|
goto put_child;
|
|
}
|
|
}
|
|
|
|
provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
|
|
return PTR_ERR_OR_ZERO(provider);
|
|
|
|
put_child:
|
|
of_node_put(child_np);
|
|
return retval;
|
|
}
|
|
|
|
static struct platform_driver mtk_xsphy_driver = {
|
|
.probe = mtk_xsphy_probe,
|
|
.driver = {
|
|
.name = "mtk-xsphy",
|
|
.of_match_table = mtk_xsphy_id_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mtk_xsphy_driver);
|
|
|
|
MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
|
|
MODULE_DESCRIPTION("MediaTek USB XS-PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|