319 lines
8.9 KiB
C
319 lines
8.9 KiB
C
/*
|
|
* Emagic EMI 2|6 usb audio interface firmware loader.
|
|
* Copyright (C) 2002
|
|
* Tapio Laxström (tapio.laxstrom@iptime.fi)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, as published by
|
|
* the Free Software Foundation, version 2.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/ihex.h>
|
|
|
|
/* include firmware (variables)*/
|
|
|
|
/* FIXME: This is quick and dirty solution! */
|
|
#define SPDIF /* if you want SPDIF comment next line */
|
|
//#undef SPDIF /* if you want MIDI uncomment this line */
|
|
|
|
#ifdef SPDIF
|
|
#define FIRMWARE_FW "emi62/spdif.fw"
|
|
#else
|
|
#define FIRMWARE_FW "emi62/midi.fw"
|
|
#endif
|
|
|
|
#define EMI62_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */
|
|
#define EMI62_PRODUCT_ID 0x0110 /* EMI 6|2m without firmware */
|
|
|
|
#define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */
|
|
#define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */
|
|
#define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */
|
|
#define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */
|
|
#define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
|
|
#define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS)
|
|
|
|
static int emi62_writememory(struct usb_device *dev, int address,
|
|
const unsigned char *data, int length,
|
|
__u8 bRequest);
|
|
static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
|
|
static int emi62_load_firmware (struct usb_device *dev);
|
|
static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
|
|
static void emi62_disconnect(struct usb_interface *intf);
|
|
static int __init emi62_init (void);
|
|
static void __exit emi62_exit (void);
|
|
|
|
|
|
/* thanks to drivers/usb/serial/keyspan_pda.c code */
|
|
static int emi62_writememory(struct usb_device *dev, int address,
|
|
const unsigned char *data, int length,
|
|
__u8 request)
|
|
{
|
|
int result;
|
|
unsigned char *buffer = kmemdup(data, length, GFP_KERNEL);
|
|
|
|
if (!buffer) {
|
|
err("emi62: kmalloc(%d) failed.", length);
|
|
return -ENOMEM;
|
|
}
|
|
/* Note: usb_control_msg returns negative value on error or length of the
|
|
* data that was written! */
|
|
result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
|
|
kfree (buffer);
|
|
return result;
|
|
}
|
|
|
|
/* thanks to drivers/usb/serial/keyspan_pda.c code */
|
|
static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
|
|
{
|
|
int response;
|
|
info("%s - %d", __func__, reset_bit);
|
|
|
|
response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
|
|
if (response < 0) {
|
|
err("emi62: set_reset (%d) failed", reset_bit);
|
|
}
|
|
return response;
|
|
}
|
|
|
|
#define FW_LOAD_SIZE 1023
|
|
|
|
static int emi62_load_firmware (struct usb_device *dev)
|
|
{
|
|
const struct firmware *loader_fw = NULL;
|
|
const struct firmware *bitstream_fw = NULL;
|
|
const struct firmware *firmware_fw = NULL;
|
|
const struct ihex_binrec *rec;
|
|
int err;
|
|
int i;
|
|
__u32 addr; /* Address to write */
|
|
__u8 *buf;
|
|
|
|
dev_dbg(&dev->dev, "load_firmware\n");
|
|
buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
|
|
if (!buf) {
|
|
err( "%s - error loading firmware: error = %d", __func__, -ENOMEM);
|
|
err = -ENOMEM;
|
|
goto wraperr;
|
|
}
|
|
|
|
err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev);
|
|
if (err)
|
|
goto nofw;
|
|
|
|
err = request_ihex_firmware(&bitstream_fw, "emi62/bitstream.fw",
|
|
&dev->dev);
|
|
if (err)
|
|
goto nofw;
|
|
|
|
err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev);
|
|
if (err) {
|
|
nofw:
|
|
err( "%s - request_firmware() failed", __func__);
|
|
goto wraperr;
|
|
}
|
|
|
|
/* Assert reset (stop the CPU in the EMI) */
|
|
err = emi62_set_reset(dev,1);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
|
|
rec = (const struct ihex_binrec *)loader_fw->data;
|
|
|
|
/* 1. We need to put the loader for the FPGA into the EZ-USB */
|
|
while (rec) {
|
|
err = emi62_writememory(dev, be32_to_cpu(rec->addr),
|
|
rec->data, be16_to_cpu(rec->len),
|
|
ANCHOR_LOAD_INTERNAL);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
rec = ihex_next_binrec(rec);
|
|
}
|
|
|
|
/* De-assert reset (let the CPU run) */
|
|
err = emi62_set_reset(dev,0);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
msleep(250); /* let device settle */
|
|
|
|
/* 2. We upload the FPGA firmware into the EMI
|
|
* Note: collect up to 1023 (yes!) bytes and send them with
|
|
* a single request. This is _much_ faster! */
|
|
rec = (const struct ihex_binrec *)bitstream_fw->data;
|
|
do {
|
|
i = 0;
|
|
addr = be32_to_cpu(rec->addr);
|
|
|
|
/* intel hex records are terminated with type 0 element */
|
|
while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) {
|
|
memcpy(buf + i, rec->data, be16_to_cpu(rec->len));
|
|
i += be16_to_cpu(rec->len);
|
|
rec = ihex_next_binrec(rec);
|
|
}
|
|
err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
} while (i > 0);
|
|
|
|
/* Assert reset (stop the CPU in the EMI) */
|
|
err = emi62_set_reset(dev,1);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
|
|
/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
|
|
for (rec = (const struct ihex_binrec *)loader_fw->data;
|
|
rec; rec = ihex_next_binrec(rec)) {
|
|
err = emi62_writememory(dev, be32_to_cpu(rec->addr),
|
|
rec->data, be16_to_cpu(rec->len),
|
|
ANCHOR_LOAD_INTERNAL);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
}
|
|
|
|
/* De-assert reset (let the CPU run) */
|
|
err = emi62_set_reset(dev,0);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
msleep(250); /* let device settle */
|
|
|
|
/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
|
|
|
|
for (rec = (const struct ihex_binrec *)firmware_fw->data;
|
|
rec; rec = ihex_next_binrec(rec)) {
|
|
if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) {
|
|
err = emi62_writememory(dev, be32_to_cpu(rec->addr),
|
|
rec->data, be16_to_cpu(rec->len),
|
|
ANCHOR_LOAD_EXTERNAL);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Assert reset (stop the CPU in the EMI) */
|
|
err = emi62_set_reset(dev,1);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
|
|
for (rec = (const struct ihex_binrec *)firmware_fw->data;
|
|
rec; rec = ihex_next_binrec(rec)) {
|
|
if (INTERNAL_RAM(be32_to_cpu(rec->addr))) {
|
|
err = emi62_writememory(dev, be32_to_cpu(rec->addr),
|
|
rec->data, be16_to_cpu(rec->len),
|
|
ANCHOR_LOAD_EXTERNAL);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* De-assert reset (let the CPU run) */
|
|
err = emi62_set_reset(dev,0);
|
|
if (err < 0) {
|
|
err("%s - error loading firmware: error = %d", __func__, err);
|
|
goto wraperr;
|
|
}
|
|
msleep(250); /* let device settle */
|
|
|
|
release_firmware(loader_fw);
|
|
release_firmware(bitstream_fw);
|
|
release_firmware(firmware_fw);
|
|
|
|
kfree(buf);
|
|
|
|
/* return 1 to fail the driver inialization
|
|
* and give real driver change to load */
|
|
return 1;
|
|
|
|
wraperr:
|
|
release_firmware(loader_fw);
|
|
release_firmware(bitstream_fw);
|
|
release_firmware(firmware_fw);
|
|
|
|
kfree(buf);
|
|
dev_err(&dev->dev, "Error\n");
|
|
return err;
|
|
}
|
|
|
|
static __devinitdata struct usb_device_id id_table [] = {
|
|
{ USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (usb, id_table);
|
|
|
|
static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *dev = interface_to_usbdev(intf);
|
|
dev_dbg(&intf->dev, "emi62_probe\n");
|
|
|
|
info("%s start", __func__);
|
|
|
|
emi62_load_firmware(dev);
|
|
|
|
/* do not return the driver context, let real audio driver do that */
|
|
return -EIO;
|
|
}
|
|
|
|
static void emi62_disconnect(struct usb_interface *intf)
|
|
{
|
|
}
|
|
|
|
static struct usb_driver emi62_driver = {
|
|
.name = "emi62 - firmware loader",
|
|
.probe = emi62_probe,
|
|
.disconnect = emi62_disconnect,
|
|
.id_table = id_table,
|
|
};
|
|
|
|
static int __init emi62_init (void)
|
|
{
|
|
int retval;
|
|
retval = usb_register (&emi62_driver);
|
|
if (retval)
|
|
printk(KERN_ERR "adi-emi: registration failed\n");
|
|
return retval;
|
|
}
|
|
|
|
static void __exit emi62_exit (void)
|
|
{
|
|
usb_deregister (&emi62_driver);
|
|
}
|
|
|
|
module_init(emi62_init);
|
|
module_exit(emi62_exit);
|
|
|
|
MODULE_AUTHOR("Tapio Laxström");
|
|
MODULE_DESCRIPTION("Emagic EMI 6|2m firmware loader.");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_FIRMWARE("emi62/loader.fw");
|
|
MODULE_FIRMWARE("emi62/bitstream.fw");
|
|
MODULE_FIRMWARE(FIRMWARE_FW);
|
|
/* vi:ai:syntax=c:sw=8:ts=8:tw=80
|
|
*/
|