504 lines
16 KiB
Plaintext
504 lines
16 KiB
Plaintext
#
|
|
# Misc strange devices
|
|
#
|
|
|
|
menuconfig MISC_DEVICES
|
|
bool "Misc devices"
|
|
default y
|
|
---help---
|
|
Say Y here to get to see options for device drivers from various
|
|
different categories. This option alone does not add any kernel code.
|
|
|
|
If you say N, all options in this submenu will be skipped and disabled.
|
|
|
|
if MISC_DEVICES
|
|
|
|
config ATMEL_PWM
|
|
tristate "Atmel AT32/AT91 PWM support"
|
|
depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
|
|
help
|
|
This option enables device driver support for the PWM channels
|
|
on certain Atmel prcoessors. Pulse Width Modulation is used for
|
|
purposes including software controlled power-efficent backlights
|
|
on LCD displays, motor control, and waveform generation.
|
|
|
|
config ATMEL_TCLIB
|
|
bool "Atmel AT32/AT91 Timer/Counter Library"
|
|
depends on (AVR32 || ARCH_AT91)
|
|
help
|
|
Select this if you want a library to allocate the Timer/Counter
|
|
blocks found on many Atmel processors. This facilitates using
|
|
these blocks by different drivers despite processor differences.
|
|
|
|
config ATMEL_TCB_CLKSRC
|
|
bool "TC Block Clocksource"
|
|
depends on ATMEL_TCLIB && GENERIC_TIME
|
|
default y
|
|
help
|
|
Select this to get a high precision clocksource based on a
|
|
TC block with a 5+ MHz base clock rate. Two timer channels
|
|
are combined to make a single 32-bit timer.
|
|
|
|
When GENERIC_CLOCKEVENTS is defined, the third timer channel
|
|
may be used as a clock event device supporting oneshot mode
|
|
(delays of up to two seconds) based on the 32 KiHz clock.
|
|
|
|
config ATMEL_TCB_CLKSRC_BLOCK
|
|
int
|
|
depends on ATMEL_TCB_CLKSRC
|
|
prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
|
|
default 0
|
|
range 0 1
|
|
help
|
|
Some chips provide more than one TC block, so you have the
|
|
choice of which one to use for the clock framework. The other
|
|
TC can be used for other purposes, such as PWM generation and
|
|
interval timing.
|
|
|
|
config IBM_ASM
|
|
tristate "Device driver for IBM RSA service processor"
|
|
depends on X86 && PCI && INPUT && EXPERIMENTAL
|
|
---help---
|
|
This option enables device driver support for in-band access to the
|
|
IBM RSA (Condor) service processor in eServer xSeries systems.
|
|
The ibmasm device driver allows user space application to access
|
|
ASM (Advanced Systems Management) functions on the service
|
|
processor. The driver is meant to be used in conjunction with
|
|
a user space API.
|
|
The ibmasm driver also enables the OS to use the UART on the
|
|
service processor board as a regular serial port. To make use of
|
|
this feature serial driver support (CONFIG_SERIAL_8250) must be
|
|
enabled.
|
|
|
|
WARNING: This software may not be supported or function
|
|
correctly on your IBM server. Please consult the IBM ServerProven
|
|
website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
|
|
information on the specific driver level and support statement
|
|
for your IBM server.
|
|
|
|
config PHANTOM
|
|
tristate "Sensable PHANToM (PCI)"
|
|
depends on PCI
|
|
help
|
|
Say Y here if you want to build a driver for Sensable PHANToM device.
|
|
|
|
This driver is only for PCI PHANToMs.
|
|
|
|
If you choose to build module, its name will be phantom. If unsure,
|
|
say N here.
|
|
|
|
config EEPROM_93CX6
|
|
tristate "EEPROM 93CX6 support"
|
|
---help---
|
|
This is a driver for the EEPROM chipsets 93c46 and 93c66.
|
|
The driver supports both read as well as write commands.
|
|
|
|
If unsure, say N.
|
|
|
|
config SGI_IOC4
|
|
tristate "SGI IOC4 Base IO support"
|
|
depends on PCI
|
|
---help---
|
|
This option enables basic support for the IOC4 chip on certain
|
|
SGI IO controller cards (IO9, IO10, and PCI-RT). This option
|
|
does not enable any specific functions on such a card, but provides
|
|
necessary infrastructure for other drivers to utilize.
|
|
|
|
If you have an SGI Altix with an IOC4-based card say Y.
|
|
Otherwise say N.
|
|
|
|
config TIFM_CORE
|
|
tristate "TI Flash Media interface support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && PCI
|
|
help
|
|
If you want support for Texas Instruments(R) Flash Media adapters
|
|
you should select this option and then also choose an appropriate
|
|
host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
|
|
support', if you have a TI PCI74xx compatible card reader, for
|
|
example.
|
|
You will also have to select some flash card format drivers. MMC/SD
|
|
cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
|
|
Interface support (MMC_TIFM_SD)'.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called tifm_core.
|
|
|
|
config TIFM_7XX1
|
|
tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
|
|
depends on PCI && TIFM_CORE && EXPERIMENTAL
|
|
default TIFM_CORE
|
|
help
|
|
This option enables support for Texas Instruments(R) PCI74xx and
|
|
PCI76xx families of Flash Media adapters, found in many laptops.
|
|
To make actual use of the device, you will have to select some
|
|
flash card format drivers, as outlined in the TIFM_CORE Help.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called tifm_7xx1.
|
|
|
|
config ACER_WMI
|
|
tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
|
|
depends on X86
|
|
depends on EXPERIMENTAL
|
|
depends on ACPI
|
|
depends on LEDS_CLASS
|
|
depends on NEW_LEDS
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
depends on SERIO_I8042
|
|
depends on RFKILL
|
|
select ACPI_WMI
|
|
---help---
|
|
This is a driver for newer Acer (and Wistron) laptops. It adds
|
|
wireless radio and bluetooth control, and on some laptops,
|
|
exposes the mail LED and LCD backlight.
|
|
|
|
For more information about this driver see
|
|
<file:Documentation/laptops/acer-wmi.txt>
|
|
|
|
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
|
|
here.
|
|
|
|
config ASUS_LAPTOP
|
|
tristate "Asus Laptop Extras (EXPERIMENTAL)"
|
|
depends on X86
|
|
depends on ACPI
|
|
depends on EXPERIMENTAL && !ACPI_ASUS
|
|
depends on LEDS_CLASS
|
|
depends on NEW_LEDS
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
---help---
|
|
This is the new Linux driver for Asus laptops. It may also support some
|
|
MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
|
|
standard ACPI events that go through /proc/acpi/events. It also adds
|
|
support for video output switching, LCD backlight control, Bluetooth and
|
|
Wlan control, and most importantly, allows you to blink those fancy LEDs.
|
|
|
|
For more information and a userspace daemon for handling the extra
|
|
buttons see <http://acpi4asus.sf.net/>.
|
|
|
|
If you have an ACPI-compatible ASUS laptop, say Y or M here.
|
|
|
|
config FUJITSU_LAPTOP
|
|
tristate "Fujitsu Laptop Extras"
|
|
depends on X86
|
|
depends on ACPI
|
|
depends on INPUT
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
---help---
|
|
This is a driver for laptops built by Fujitsu:
|
|
|
|
* P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
|
|
* Possibly other Fujitsu laptop models
|
|
* Tested with S6410 and S7020
|
|
|
|
It adds support for LCD brightness control and some hotkeys.
|
|
|
|
If you have a Fujitsu laptop, say Y or M here.
|
|
|
|
config FUJITSU_LAPTOP_DEBUG
|
|
bool "Verbose debug mode for Fujitsu Laptop Extras"
|
|
depends on FUJITSU_LAPTOP
|
|
default n
|
|
---help---
|
|
Enables extra debug output from the fujitsu extras driver, at the
|
|
expense of a slight increase in driver size.
|
|
|
|
If you are not sure, say N here.
|
|
|
|
config TC1100_WMI
|
|
tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)"
|
|
depends on X86 && !X86_64
|
|
depends on EXPERIMENTAL
|
|
depends on ACPI
|
|
select ACPI_WMI
|
|
---help---
|
|
This is a driver for the WMI extensions (wireless and bluetooth power
|
|
control) of the HP Compaq TC1100 tablet.
|
|
|
|
config HP_WMI
|
|
tristate "HP WMI extras"
|
|
depends on ACPI_WMI
|
|
depends on INPUT
|
|
depends on RFKILL
|
|
help
|
|
Say Y here if you want to support WMI-based hotkeys on HP laptops and
|
|
to read data from WMI such as docking or ambient light sensor state.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called hp-wmi.
|
|
|
|
config ICS932S401
|
|
tristate "Integrated Circuits ICS932S401"
|
|
depends on I2C && EXPERIMENTAL
|
|
help
|
|
If you say yes here you get support for the Integrated Circuits
|
|
ICS932S401 clock control chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ics932s401.
|
|
|
|
config MSI_LAPTOP
|
|
tristate "MSI Laptop Extras"
|
|
depends on X86
|
|
depends on ACPI
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
---help---
|
|
This is a driver for laptops built by MSI (MICRO-STAR
|
|
INTERNATIONAL):
|
|
|
|
MSI MegaBook S270 (MS-1013)
|
|
Cytron/TCM/Medion/Tchibo MD96100/SAM2000
|
|
|
|
It adds support for Bluetooth, WLAN and LCD brightness control.
|
|
|
|
More information about this driver is available at
|
|
<http://0pointer.de/lennart/tchibo.html>.
|
|
|
|
If you have an MSI S270 laptop, say Y or M here.
|
|
|
|
config PANASONIC_LAPTOP
|
|
tristate "Panasonic Laptop Extras"
|
|
depends on X86 && INPUT && ACPI
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
---help---
|
|
This driver adds support for access to backlight control and hotkeys
|
|
on Panasonic Let's Note laptops.
|
|
|
|
If you have a Panasonic Let's note laptop (such as the R1(N variant),
|
|
R2, R3, R5, T2, W2 and Y2 series), say Y.
|
|
|
|
config COMPAL_LAPTOP
|
|
tristate "Compal Laptop Extras"
|
|
depends on X86
|
|
depends on ACPI
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
---help---
|
|
This is a driver for laptops built by Compal:
|
|
|
|
Compal FL90/IFL90
|
|
Compal FL91/IFL91
|
|
Compal FL92/JFL92
|
|
Compal FT00/IFT00
|
|
|
|
It adds support for Bluetooth, WLAN and LCD brightness control.
|
|
|
|
If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.
|
|
|
|
config SONY_LAPTOP
|
|
tristate "Sony Laptop Extras"
|
|
depends on X86 && ACPI
|
|
select BACKLIGHT_CLASS_DEVICE
|
|
depends on INPUT
|
|
---help---
|
|
This mini-driver drives the SNC and SPIC devices present in the ACPI
|
|
BIOS of the Sony Vaio laptops.
|
|
|
|
It gives access to some extra laptop functionalities like Bluetooth,
|
|
screen brightness control, Fn keys and allows powering on/off some
|
|
devices.
|
|
|
|
Read <file:Documentation/laptops/sony-laptop.txt> for more information.
|
|
|
|
config SONYPI_COMPAT
|
|
bool "Sonypi compatibility"
|
|
depends on SONY_LAPTOP
|
|
---help---
|
|
Build the sonypi driver compatibility code into the sony-laptop driver.
|
|
|
|
config THINKPAD_ACPI
|
|
tristate "ThinkPad ACPI Laptop Extras"
|
|
depends on X86 && ACPI
|
|
select BACKLIGHT_LCD_SUPPORT
|
|
select BACKLIGHT_CLASS_DEVICE
|
|
select HWMON
|
|
select NVRAM
|
|
select INPUT
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
select NET
|
|
select RFKILL
|
|
---help---
|
|
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
|
|
support for Fn-Fx key combinations, Bluetooth control, video
|
|
output switching, ThinkLight control, UltraBay eject and more.
|
|
For more information about this driver see
|
|
<file:Documentation/laptops/thinkpad-acpi.txt> and
|
|
<http://ibm-acpi.sf.net/> .
|
|
|
|
This driver was formerly known as ibm-acpi.
|
|
|
|
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
|
|
|
|
config THINKPAD_ACPI_DEBUG
|
|
bool "Verbose debug mode"
|
|
depends on THINKPAD_ACPI
|
|
default n
|
|
---help---
|
|
Enables extra debugging information, at the expense of a slightly
|
|
increase in driver size.
|
|
|
|
If you are not sure, say N here.
|
|
|
|
config THINKPAD_ACPI_DOCK
|
|
bool "Legacy Docking Station Support"
|
|
depends on THINKPAD_ACPI
|
|
depends on ACPI_DOCK=n
|
|
default n
|
|
---help---
|
|
Allows the thinkpad_acpi driver to handle docking station events.
|
|
This support was made obsolete by the generic ACPI docking station
|
|
support (CONFIG_ACPI_DOCK). It will allow locking and removing the
|
|
laptop from the docking station, but will not properly connect PCI
|
|
devices.
|
|
|
|
If you are not sure, say N here.
|
|
|
|
config THINKPAD_ACPI_BAY
|
|
bool "Legacy Removable Bay Support"
|
|
depends on THINKPAD_ACPI
|
|
default y
|
|
---help---
|
|
Allows the thinkpad_acpi driver to handle removable bays. It will
|
|
electrically disable the device in the bay, and also generate
|
|
notifications when the bay lever is ejected or inserted.
|
|
|
|
If you are not sure, say Y here.
|
|
|
|
config THINKPAD_ACPI_VIDEO
|
|
bool "Video output control support"
|
|
depends on THINKPAD_ACPI
|
|
default y
|
|
---help---
|
|
Allows the thinkpad_acpi driver to provide an interface to control
|
|
the various video output ports.
|
|
|
|
This feature often won't work well, depending on ThinkPad model,
|
|
display state, video output devices in use, whether there is a X
|
|
server running, phase of the moon, and the current mood of
|
|
Schroedinger's cat. If you can use X.org's RandR to control
|
|
your ThinkPad's video output ports instead of this feature,
|
|
don't think twice: do it and say N here to save some memory.
|
|
|
|
If you are not sure, say Y here.
|
|
|
|
config THINKPAD_ACPI_HOTKEY_POLL
|
|
bool "Support NVRAM polling for hot keys"
|
|
depends on THINKPAD_ACPI
|
|
default y
|
|
---help---
|
|
Some thinkpad models benefit from NVRAM polling to detect a few of
|
|
the hot key press events. If you know your ThinkPad model does not
|
|
need to do NVRAM polling to support any of the hot keys you use,
|
|
unselecting this option will save about 1kB of memory.
|
|
|
|
ThinkPads T40 and newer, R52 and newer, and X31 and newer are
|
|
unlikely to need NVRAM polling in their latest BIOS versions.
|
|
|
|
NVRAM polling can detect at most the following keys: ThinkPad/Access
|
|
IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
|
|
Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
|
|
|
|
If you are not sure, say Y here. The driver enables polling only if
|
|
it is strictly necessary to do so.
|
|
|
|
config ATMEL_SSC
|
|
tristate "Device driver for Atmel SSC peripheral"
|
|
depends on AVR32 || ARCH_AT91
|
|
---help---
|
|
This option enables device driver support for Atmel Syncronized
|
|
Serial Communication peripheral (SSC).
|
|
|
|
The SSC peripheral supports a wide variety of serial frame based
|
|
communications, i.e. I2S, SPI, etc.
|
|
|
|
If unsure, say N.
|
|
|
|
config INTEL_MENLOW
|
|
tristate "Thermal Management driver for Intel menlow platform"
|
|
depends on ACPI_THERMAL
|
|
select THERMAL
|
|
depends on X86
|
|
---help---
|
|
ACPI thermal management enhancement driver on
|
|
Intel Menlow platform.
|
|
|
|
If unsure, say N.
|
|
|
|
config EEEPC_LAPTOP
|
|
tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
|
|
depends on X86
|
|
depends on ACPI
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
depends on HWMON
|
|
depends on EXPERIMENTAL
|
|
depends on RFKILL
|
|
---help---
|
|
This driver supports the Fn-Fx keys on Eee PC laptops.
|
|
It also adds the ability to switch camera/wlan on/off.
|
|
|
|
If you have an Eee PC laptop, say Y or M here.
|
|
|
|
config ENCLOSURE_SERVICES
|
|
tristate "Enclosure Services"
|
|
default n
|
|
help
|
|
Provides support for intelligent enclosures (bays which
|
|
contain storage devices). You also need either a host
|
|
driver (SCSI/ATA) which supports enclosures
|
|
or a SCSI enclosure device (SES) to use these services.
|
|
|
|
config SGI_XP
|
|
tristate "Support communication between SGI SSIs"
|
|
depends on NET
|
|
depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP
|
|
select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
|
|
select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
|
|
select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
|
|
---help---
|
|
An SGI machine can be divided into multiple Single System
|
|
Images which act independently of each other and have
|
|
hardware based memory protection from the others. Enabling
|
|
this feature will allow for direct communication between SSIs
|
|
based on a network adapter and DMA messaging.
|
|
|
|
config HP_ILO
|
|
tristate "Channel interface driver for HP iLO/iLO2 processor"
|
|
depends on PCI
|
|
default n
|
|
help
|
|
The channel interface driver allows applications to communicate
|
|
with iLO/iLO2 management processors present on HP ProLiant
|
|
servers. Upon loading, the driver creates /dev/hpilo/dXccbN files,
|
|
which can be used to gather data from the management processor,
|
|
via read and write system calls.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hpilo.
|
|
|
|
config SGI_GRU
|
|
tristate "SGI GRU driver"
|
|
depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
|
|
default n
|
|
select MMU_NOTIFIER
|
|
---help---
|
|
The GRU is a hardware resource located in the system chipset. The GRU
|
|
contains memory that can be mmapped into the user address space. This memory is
|
|
used to communicate with the GRU to perform functions such as load/store,
|
|
scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
|
|
instructions using user virtual addresses. GRU instructions (ex., bcopy) use
|
|
user virtual addresses for operands.
|
|
|
|
If you are not running on a SGI UV system, say N.
|
|
|
|
config SGI_GRU_DEBUG
|
|
bool "SGI GRU driver debug"
|
|
depends on SGI_GRU
|
|
default n
|
|
---help---
|
|
This option enables addition debugging code for the SGI GRU driver. If
|
|
you are unsure, say N.
|
|
|
|
source "drivers/misc/c2port/Kconfig"
|
|
|
|
endif # MISC_DEVICES
|