152 lines
3.7 KiB
C
152 lines
3.7 KiB
C
/*
|
|
* Radio tuning for Maxim max2820 on RTL8180
|
|
*
|
|
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
|
|
*
|
|
* Code from the BSD driver and the rtl8181 project have been
|
|
* very useful to understand certain things
|
|
*
|
|
* I want to thanks the Authors of such projects and the Ndiswrapper
|
|
* project Authors.
|
|
*
|
|
* A special Big Thanks also is for all people who donated me cards,
|
|
* making possible the creation of the original rtl8180 driver
|
|
* from which this code is derived!
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <net/mac80211.h>
|
|
|
|
#include "rtl8180.h"
|
|
#include "rtl8180_max2820.h"
|
|
|
|
static const u32 max2820_chan[] = {
|
|
12, /* CH 1 */
|
|
17,
|
|
22,
|
|
27,
|
|
32,
|
|
37,
|
|
42,
|
|
47,
|
|
52,
|
|
57,
|
|
62,
|
|
67,
|
|
72,
|
|
84, /* CH 14 */
|
|
};
|
|
|
|
static void write_max2820(struct ieee80211_hw *dev, u8 addr, u32 data)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u32 phy_config;
|
|
|
|
phy_config = 0x90 + (data & 0xf);
|
|
phy_config <<= 16;
|
|
phy_config += addr;
|
|
phy_config <<= 8;
|
|
phy_config += (data >> 4) & 0xff;
|
|
|
|
rtl818x_iowrite32(priv,
|
|
(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
static void max2820_write_phy_antenna(struct ieee80211_hw *dev, short chan)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u8 ant;
|
|
|
|
ant = MAXIM_ANTENNA;
|
|
if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
|
|
ant |= BB_ANTENNA_B;
|
|
if (chan == 14)
|
|
ant |= BB_ANTATTEN_CHAN14;
|
|
|
|
rtl8180_write_phy(dev, 0x10, ant);
|
|
}
|
|
|
|
static void max2820_rf_set_channel(struct ieee80211_hw *dev,
|
|
struct ieee80211_conf *conf)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
|
|
unsigned int chan_idx = channel - 1;
|
|
u32 txpw = priv->channels[chan_idx].hw_value & 0xFF;
|
|
u32 chan = max2820_chan[chan_idx];
|
|
|
|
/* While philips SA2400 drive the PA bias from
|
|
* sa2400, for MAXIM we do this directly from BB */
|
|
rtl8180_write_phy(dev, 3, txpw);
|
|
|
|
max2820_write_phy_antenna(dev, chan);
|
|
write_max2820(dev, 3, chan);
|
|
}
|
|
|
|
static void max2820_rf_stop(struct ieee80211_hw *dev)
|
|
{
|
|
rtl8180_write_phy(dev, 3, 0x8);
|
|
write_max2820(dev, 1, 0);
|
|
}
|
|
|
|
|
|
static void max2820_rf_init(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
|
|
/* MAXIM from netbsd driver */
|
|
write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */
|
|
write_max2820(dev, 1, 0x01e); /* enable register */
|
|
write_max2820(dev, 2, 0x001); /* synt register */
|
|
|
|
max2820_rf_set_channel(dev, NULL);
|
|
|
|
write_max2820(dev, 4, 0x313); /* rx register */
|
|
|
|
/* PA is driven directly by the BB, we keep the MAXIM bias
|
|
* at the highest value in case that setting it to lower
|
|
* values may introduce some further attenuation somewhere..
|
|
*/
|
|
write_max2820(dev, 5, 0x00f);
|
|
|
|
/* baseband configuration */
|
|
rtl8180_write_phy(dev, 0, 0x88); /* sys1 */
|
|
rtl8180_write_phy(dev, 3, 0x08); /* txagc */
|
|
rtl8180_write_phy(dev, 4, 0xf8); /* lnadet */
|
|
rtl8180_write_phy(dev, 5, 0x90); /* ifagcinit */
|
|
rtl8180_write_phy(dev, 6, 0x1a); /* ifagclimit */
|
|
rtl8180_write_phy(dev, 7, 0x64); /* ifagcdet */
|
|
|
|
max2820_write_phy_antenna(dev, 1);
|
|
|
|
rtl8180_write_phy(dev, 0x11, 0x88); /* trl */
|
|
|
|
if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
|
|
RTL818X_CONFIG2_ANTENNA_DIV)
|
|
rtl8180_write_phy(dev, 0x12, 0xc7);
|
|
else
|
|
rtl8180_write_phy(dev, 0x12, 0x47);
|
|
|
|
rtl8180_write_phy(dev, 0x13, 0x9b);
|
|
|
|
rtl8180_write_phy(dev, 0x19, 0x0); /* CHESTLIM */
|
|
rtl8180_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM */
|
|
|
|
max2820_rf_set_channel(dev, NULL);
|
|
}
|
|
|
|
const struct rtl818x_rf_ops max2820_rf_ops = {
|
|
.name = "Maxim",
|
|
.init = max2820_rf_init,
|
|
.stop = max2820_rf_stop,
|
|
.set_chan = max2820_rf_set_channel
|
|
};
|