355 lines
8.4 KiB
C
355 lines
8.4 KiB
C
/*
|
|
* ACPI PATA driver
|
|
*
|
|
* (c) 2007 Red Hat <alan@redhat.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <acpi/acpi_bus.h>
|
|
#include <acpi/acnames.h>
|
|
#include <acpi/acnamesp.h>
|
|
#include <acpi/acparser.h>
|
|
#include <acpi/acexcep.h>
|
|
#include <acpi/acmacros.h>
|
|
#include <acpi/actypes.h>
|
|
|
|
#include <linux/libata.h>
|
|
#include <linux/ata.h>
|
|
|
|
#define DRV_NAME "pata_acpi"
|
|
#define DRV_VERSION "0.2.3"
|
|
|
|
struct pata_acpi {
|
|
struct ata_acpi_gtm gtm;
|
|
void *last;
|
|
unsigned long mask[2];
|
|
};
|
|
|
|
/**
|
|
* pacpi_pre_reset - check for 40/80 pin
|
|
* @ap: Port
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Perform the PATA port setup we need.
|
|
*/
|
|
|
|
static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
|
|
return -ENODEV;
|
|
|
|
return ata_std_prereset(link, deadline);
|
|
}
|
|
|
|
/**
|
|
* pacpi_cable_detect - cable type detection
|
|
* @ap: port to detect
|
|
*
|
|
* Perform device specific cable detection
|
|
*/
|
|
|
|
static int pacpi_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
|
|
if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA))
|
|
return ATA_CBL_PATA80;
|
|
else
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
/**
|
|
* pacpi_error_handler - Setup and error handler
|
|
* @ap: Port to handle
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void pacpi_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, pacpi_pre_reset, ata_std_softreset, NULL,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
/**
|
|
* pacpi_discover_modes - filter non ACPI modes
|
|
* @adev: ATA device
|
|
* @mask: proposed modes
|
|
*
|
|
* Try the modes available and see which ones the ACPI method will
|
|
* set up sensibly. From this we get a mask of ACPI modes we can use
|
|
*/
|
|
|
|
static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
struct ata_acpi_gtm probe;
|
|
unsigned int xfer_mask;
|
|
|
|
probe = acpi->gtm;
|
|
|
|
ata_acpi_gtm(ap, &probe);
|
|
|
|
xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
|
|
|
|
if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
|
|
ap->cbl = ATA_CBL_PATA80;
|
|
|
|
return xfer_mask;
|
|
}
|
|
|
|
/**
|
|
* pacpi_mode_filter - mode filter for ACPI
|
|
* @adev: device
|
|
* @mask: mask of valid modes
|
|
*
|
|
* Filter the valid mode list according to our own specific rules, in
|
|
* this case the list of discovered valid modes obtained by ACPI probing
|
|
*/
|
|
|
|
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
|
|
{
|
|
struct pata_acpi *acpi = adev->link->ap->private_data;
|
|
return ata_pci_default_filter(adev, mask & acpi->mask[adev->devno]);
|
|
}
|
|
|
|
/**
|
|
* pacpi_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*/
|
|
|
|
static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
int unit = adev->devno;
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
const struct ata_timing *t;
|
|
|
|
if (!(acpi->gtm.flags & 0x10))
|
|
unit = 0;
|
|
|
|
/* Now stuff the nS values into the structure */
|
|
t = ata_timing_find_mode(adev->pio_mode);
|
|
acpi->gtm.drive[unit].pio = t->cycle;
|
|
ata_acpi_stm(ap, &acpi->gtm);
|
|
/* See what mode we actually got */
|
|
ata_acpi_gtm(ap, &acpi->gtm);
|
|
}
|
|
|
|
/**
|
|
* pacpi_set_dmamode - set initial DMA mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*/
|
|
|
|
static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
int unit = adev->devno;
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
const struct ata_timing *t;
|
|
|
|
if (!(acpi->gtm.flags & 0x10))
|
|
unit = 0;
|
|
|
|
/* Now stuff the nS values into the structure */
|
|
t = ata_timing_find_mode(adev->dma_mode);
|
|
if (adev->dma_mode >= XFER_UDMA_0) {
|
|
acpi->gtm.drive[unit].dma = t->udma;
|
|
acpi->gtm.flags |= (1 << (2 * unit));
|
|
} else {
|
|
acpi->gtm.drive[unit].dma = t->cycle;
|
|
acpi->gtm.flags &= ~(1 << (2 * unit));
|
|
}
|
|
ata_acpi_stm(ap, &acpi->gtm);
|
|
/* See what mode we actually got */
|
|
ata_acpi_gtm(ap, &acpi->gtm);
|
|
}
|
|
|
|
/**
|
|
* pacpi_qc_issue_prot - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings if
|
|
* neccessary.
|
|
*/
|
|
|
|
static unsigned int pacpi_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
|
|
if (acpi->gtm.flags & 0x10)
|
|
return ata_qc_issue_prot(qc);
|
|
|
|
if (adev != acpi->last) {
|
|
pacpi_set_piomode(ap, adev);
|
|
if (adev->dma_mode)
|
|
pacpi_set_dmamode(ap, adev);
|
|
acpi->last = adev;
|
|
}
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
/**
|
|
* pacpi_port_start - port setup
|
|
* @ap: ATA port being set up
|
|
*
|
|
* Use the port_start hook to maintain private control structures
|
|
*/
|
|
|
|
static int pacpi_port_start(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct pata_acpi *acpi;
|
|
|
|
int ret;
|
|
|
|
if (ap->acpi_handle == NULL)
|
|
return -ENODEV;
|
|
|
|
acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
|
|
if (ap->private_data == NULL)
|
|
return -ENOMEM;
|
|
acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
|
|
acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
|
|
ret = ata_sff_port_start(ap);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct scsi_host_template pacpi_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
/* Use standard CHS mapping rules */
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const struct ata_port_operations pacpi_ops = {
|
|
.set_piomode = pacpi_set_piomode,
|
|
.set_dmamode = pacpi_set_dmamode,
|
|
.mode_filter = pacpi_mode_filter,
|
|
|
|
/* Task file is PCI ATA format, use helpers */
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = pacpi_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = pacpi_cable_detect,
|
|
|
|
/* BMDMA handling is PCI ATA format, use helpers */
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = pacpi_qc_issue_prot,
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
/* Timeout handling */
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
/* Generic PATA PCI ATA helpers */
|
|
.port_start = pacpi_port_start,
|
|
};
|
|
|
|
|
|
/**
|
|
* pacpi_init_one - Register ACPI ATA PCI device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in pacpi_pci_tbl matching with @pdev
|
|
*
|
|
* Called from kernel PCI layer.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.sht = &pacpi_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
|
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x07,
|
|
.udma_mask = 0x7f,
|
|
|
|
.port_ops = &pacpi_ops,
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
return ata_pci_init_one(pdev, ppi);
|
|
}
|
|
|
|
static const struct pci_device_id pacpi_pci_tbl[] = {
|
|
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver pacpi_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pacpi_pci_tbl,
|
|
.probe = pacpi_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init pacpi_init(void)
|
|
{
|
|
return pci_register_driver(&pacpi_pci_driver);
|
|
}
|
|
|
|
static void __exit pacpi_exit(void)
|
|
{
|
|
pci_unregister_driver(&pacpi_pci_driver);
|
|
}
|
|
|
|
module_init(pacpi_init);
|
|
module_exit(pacpi_exit);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|