linux_old1/arch/arm/boot/dts/kirkwood-ts419.dtsi

76 lines
1.6 KiB
Plaintext

/*
* Device Tree include file for QNAP TS41X
*
* Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/ {
model = "QNAP TS419 family";
compatible = "qnap,ts419", "marvell,kirkwood";
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-names = "default";
pmx_USB_copy_button: pmx-USB-copy-button {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_reset_button: pmx-reset-button {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
/*
* JP1 indicates if an LCD module is installed
* on the serial port (0), or if the port is used
* as a console (1).
*/
pmx_jumper_jp1: pmx-jumper_jp1 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
pinctrl-names = "default";
copy {
label = "USB Copy";
linux,code = <KEY_COPY>;
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
};
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
/* overwrite reg property in board file */
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};