31 lines
1.4 KiB
Plaintext
31 lines
1.4 KiB
Plaintext
Device Tree Clock bindings for Altera's SoCFPGA platform
|
|
|
|
This binding uses the common clock binding[1].
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Required properties:
|
|
- compatible : shall be one of the following:
|
|
"altr,socfpga-pll-clock" - for a PLL clock
|
|
"altr,socfpga-perip-clock" - The peripheral clock divided from the
|
|
PLL clock.
|
|
"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
|
|
can get gated.
|
|
|
|
- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
|
|
- clocks : shall be the input parent clock phandle for the clock. This is
|
|
either an oscillator or a pll output.
|
|
- #clock-cells : from common clock binding, shall be set to 0.
|
|
|
|
Optional properties:
|
|
- fixed-divider : If clocks have a fixed divider value, use this property.
|
|
- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
|
|
and the bit index.
|
|
- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
|
|
the divider register, bit shift, and width.
|
|
- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
|
|
the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
|
|
value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
|
|
hold/delay times that is needed for the SD/MMC CIU clock. The values of both
|
|
can be 0-315 degrees, in 45 degree increments.
|