113 lines
3.5 KiB
C
113 lines
3.5 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
#ifndef __MIPSNET_H
|
|
#define __MIPSNET_H
|
|
|
|
/*
|
|
* Id of this Net device, as seen by the core.
|
|
*/
|
|
#define MIPS_NET_DEV_ID ((uint64_t) \
|
|
((uint64_t) 'M' << 0)| \
|
|
((uint64_t) 'I' << 8)| \
|
|
((uint64_t) 'P' << 16)| \
|
|
((uint64_t) 'S' << 24)| \
|
|
((uint64_t) 'N' << 32)| \
|
|
((uint64_t) 'E' << 40)| \
|
|
((uint64_t) 'T' << 48)| \
|
|
((uint64_t) '0' << 56))
|
|
|
|
/*
|
|
* Net status/control block as seen by sw in the core.
|
|
* (Why not use bit fields? can't be bothered with cross-platform struct
|
|
* packing.)
|
|
*/
|
|
struct net_control_block {
|
|
/*
|
|
* dev info for probing
|
|
* reads as MIPSNET%d where %d is some form of version
|
|
*/
|
|
uint64_t devId; /* 0x00 */
|
|
|
|
/*
|
|
* read only busy flag.
|
|
* Set and cleared by the Net Device to indicate that an rx or a tx
|
|
* is in progress.
|
|
*/
|
|
uint32_t busy; /* 0x08 */
|
|
|
|
/*
|
|
* Set by the Net Device.
|
|
* The device will set it once data has been received.
|
|
* The value is the number of bytes that should be read from
|
|
* rxDataBuffer. The value will decrease till 0 until all the data
|
|
* from rxDataBuffer has been read.
|
|
*/
|
|
uint32_t rxDataCount; /* 0x0c */
|
|
#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16)
|
|
|
|
/*
|
|
* Settable from the MIPS core, cleared by the Net Device. The core
|
|
* should set the number of bytes it wants to send, then it should
|
|
* write those bytes of data to txDataBuffer. The device will clear
|
|
* txDataCount has been processed (not necessarily sent).
|
|
*/
|
|
uint32_t txDataCount; /* 0x10 */
|
|
|
|
/*
|
|
* Interrupt control
|
|
*
|
|
* Used to clear the interrupted generated by this dev.
|
|
* Write a 1 to clear the interrupt. (except bit31).
|
|
*
|
|
* Bit0 is set if it was a tx-done interrupt.
|
|
* Bit1 is set when new rx-data is available.
|
|
* Until this bit is cleared there will be no other RXs.
|
|
*
|
|
* Bit31 is used for testing, it clears after a read.
|
|
* Writing 1 to this bit will cause an interrupt to be generated.
|
|
* To clear the test interrupt, write 0 to this register.
|
|
*/
|
|
uint32_t interruptControl; /*0x14 */
|
|
#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1 << 0))
|
|
#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1 << 1))
|
|
#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1 << 31))
|
|
#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE | \
|
|
MIPSNET_INTCTL_RXDONE | \
|
|
MIPSNET_INTCTL_TESTBIT)
|
|
|
|
/*
|
|
* Readonly core-specific interrupt info for the device to signal the
|
|
* core. The meaning of the contents of this field might change.
|
|
*
|
|
* TODO: the whole memIntf interrupt scheme is messy: the device should
|
|
* have no control what so ever of what VPE/register set is being
|
|
* used. The MemIntf should only expose interrupt lines, and
|
|
* something in the config should be responsible for the
|
|
* line<->core/vpe bindings.
|
|
*/
|
|
uint32_t interruptInfo; /* 0x18 */
|
|
|
|
/*
|
|
* This is where the received data is read out.
|
|
* There is more data to read until rxDataReady is 0.
|
|
* Only 1 byte at this regs offset is used.
|
|
*/
|
|
uint32_t rxDataBuffer; /* 0x1c */
|
|
|
|
/*
|
|
* This is where the data to transmit is written. Data should be
|
|
* written for the amount specified in the txDataCount register. Only
|
|
* 1 byte at this regs offset is used.
|
|
*/
|
|
uint32_t txDataBuffer; /* 0x20 */
|
|
};
|
|
|
|
#define MIPSNET_IO_EXTENT 0x40 /* being generous */
|
|
|
|
#define field_offset(field) (offsetof(struct net_control_block, field))
|
|
|
|
#endif /* __MIPSNET_H */
|