511 lines
14 KiB
C
511 lines
14 KiB
C
#include <media/saa7146_vv.h>
|
|
|
|
static int vbi_pixel_to_capture = 720 * 2;
|
|
|
|
static int vbi_workaround(struct saa7146_dev *dev)
|
|
{
|
|
struct saa7146_vv *vv = dev->vv_data;
|
|
|
|
u32 *cpu;
|
|
dma_addr_t dma_addr;
|
|
|
|
int count = 0;
|
|
int i;
|
|
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
DEB_VBI(("dev:%p\n",dev));
|
|
|
|
/* once again, a bug in the saa7146: the brs acquisition
|
|
is buggy and especially the BXO-counter does not work
|
|
as specified. there is this workaround, but please
|
|
don't let me explain it. ;-) */
|
|
|
|
cpu = pci_alloc_consistent(dev->pci, 4096, &dma_addr);
|
|
if (NULL == cpu)
|
|
return -ENOMEM;
|
|
|
|
/* setup some basic programming, just for the workaround */
|
|
saa7146_write(dev, BASE_EVEN3, dma_addr);
|
|
saa7146_write(dev, BASE_ODD3, dma_addr+vbi_pixel_to_capture);
|
|
saa7146_write(dev, PROT_ADDR3, dma_addr+4096);
|
|
saa7146_write(dev, PITCH3, vbi_pixel_to_capture);
|
|
saa7146_write(dev, BASE_PAGE3, 0x0);
|
|
saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0));
|
|
saa7146_write(dev, MC2, MASK_04|MASK_20);
|
|
|
|
/* load brs-control register */
|
|
WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
|
|
/* BXO = 1h, BRS to outbound */
|
|
WRITE_RPS1(0xc000008c);
|
|
/* wait for vbi_a or vbi_b*/
|
|
if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
|
|
DEB_D(("...using port b\n"));
|
|
WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B);
|
|
WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B);
|
|
/*
|
|
WRITE_RPS1(CMD_PAUSE | MASK_09);
|
|
*/
|
|
} else {
|
|
DEB_D(("...using port a\n"));
|
|
WRITE_RPS1(CMD_PAUSE | MASK_10);
|
|
}
|
|
/* upload brs */
|
|
WRITE_RPS1(CMD_UPLOAD | MASK_08);
|
|
/* load brs-control register */
|
|
WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
|
|
/* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */
|
|
WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19);
|
|
/* wait for brs_done */
|
|
WRITE_RPS1(CMD_PAUSE | MASK_08);
|
|
/* upload brs */
|
|
WRITE_RPS1(CMD_UPLOAD | MASK_08);
|
|
/* load video-dma3 NumLines3 and NumBytes3 */
|
|
WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4));
|
|
/* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */
|
|
WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture));
|
|
/* load brs-control register */
|
|
WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
|
|
/* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */
|
|
WRITE_RPS1((540 << 7) | (5 << 19)); // 5 == vbi_start
|
|
/* wait for brs_done */
|
|
WRITE_RPS1(CMD_PAUSE | MASK_08);
|
|
/* upload brs and video-dma3*/
|
|
WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04);
|
|
/* load mc2 register: enable dma3 */
|
|
WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4));
|
|
WRITE_RPS1(MASK_20 | MASK_04);
|
|
/* generate interrupt */
|
|
WRITE_RPS1(CMD_INTERRUPT);
|
|
/* stop rps1 */
|
|
WRITE_RPS1(CMD_STOP);
|
|
|
|
/* we have to do the workaround twice to be sure that
|
|
everything is ok */
|
|
for(i = 0; i < 2; i++) {
|
|
|
|
/* indicate to the irq handler that we do the workaround */
|
|
saa7146_write(dev, MC2, MASK_31|MASK_15);
|
|
|
|
saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0));
|
|
saa7146_write(dev, MC2, MASK_04|MASK_20);
|
|
|
|
/* enable rps1 irqs */
|
|
SAA7146_IER_ENABLE(dev,MASK_28);
|
|
|
|
/* prepare to wait to be woken up by the irq-handler */
|
|
add_wait_queue(&vv->vbi_wq, &wait);
|
|
current->state = TASK_INTERRUPTIBLE;
|
|
|
|
/* start rps1 to enable workaround */
|
|
saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
|
|
saa7146_write(dev, MC1, (MASK_13 | MASK_29));
|
|
|
|
schedule();
|
|
|
|
DEB_VBI(("brs bug workaround %d/1.\n",i));
|
|
|
|
remove_wait_queue(&vv->vbi_wq, &wait);
|
|
current->state = TASK_RUNNING;
|
|
|
|
/* disable rps1 irqs */
|
|
SAA7146_IER_DISABLE(dev,MASK_28);
|
|
|
|
/* stop video-dma3 */
|
|
saa7146_write(dev, MC1, MASK_20);
|
|
|
|
if(signal_pending(current)) {
|
|
|
|
DEB_VBI(("aborted (rps:0x%08x).\n",saa7146_read(dev,RPS_ADDR1)));
|
|
|
|
/* stop rps1 for sure */
|
|
saa7146_write(dev, MC1, MASK_29);
|
|
|
|
pci_free_consistent(dev->pci, 4096, cpu, dma_addr);
|
|
return -EINTR;
|
|
}
|
|
}
|
|
|
|
pci_free_consistent(dev->pci, 4096, cpu, dma_addr);
|
|
return 0;
|
|
}
|
|
|
|
static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
|
|
{
|
|
struct saa7146_vv *vv = dev->vv_data;
|
|
|
|
struct saa7146_video_dma vdma3;
|
|
|
|
int count = 0;
|
|
unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
|
|
unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
|
|
|
|
/*
|
|
vdma3.base_even = 0xc8000000+2560*70;
|
|
vdma3.base_odd = 0xc8000000;
|
|
vdma3.prot_addr = 0xc8000000+2560*164;
|
|
vdma3.pitch = 2560;
|
|
vdma3.base_page = 0;
|
|
vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above!
|
|
*/
|
|
vdma3.base_even = buf->pt[2].offset;
|
|
vdma3.base_odd = buf->pt[2].offset + 16 * vbi_pixel_to_capture;
|
|
vdma3.prot_addr = buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture;
|
|
vdma3.pitch = vbi_pixel_to_capture;
|
|
vdma3.base_page = buf->pt[2].dma | ME1;
|
|
vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture;
|
|
|
|
saa7146_write_out_dma(dev, 3, &vdma3);
|
|
|
|
/* write beginning of rps-program */
|
|
count = 0;
|
|
|
|
/* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */
|
|
|
|
/* we don't wait here for the first field anymore. this is different from the video
|
|
capture and might cause that the first buffer is only half filled (with only
|
|
one field). but since this is some sort of streaming data, this is not that negative.
|
|
but by doing this, we can use the whole engine from videobuf-dma-sg.c... */
|
|
|
|
/*
|
|
WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait);
|
|
WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait);
|
|
*/
|
|
/* set bit 1 */
|
|
WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4));
|
|
WRITE_RPS1(MASK_28 | MASK_12);
|
|
|
|
/* turn on video-dma3 */
|
|
WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4));
|
|
WRITE_RPS1(MASK_04 | MASK_20); /* => mask */
|
|
WRITE_RPS1(MASK_04 | MASK_20); /* => values */
|
|
|
|
/* wait for o_fid_a/b / e_fid_a/b toggle */
|
|
WRITE_RPS1(CMD_PAUSE | o_wait);
|
|
WRITE_RPS1(CMD_PAUSE | e_wait);
|
|
|
|
/* generate interrupt */
|
|
WRITE_RPS1(CMD_INTERRUPT);
|
|
|
|
/* stop */
|
|
WRITE_RPS1(CMD_STOP);
|
|
|
|
/* enable rps1 irqs */
|
|
SAA7146_IER_ENABLE(dev, MASK_28);
|
|
|
|
/* write the address of the rps-program */
|
|
saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
|
|
|
|
/* turn on rps */
|
|
saa7146_write(dev, MC1, (MASK_13 | MASK_29));
|
|
}
|
|
|
|
static int buffer_activate(struct saa7146_dev *dev,
|
|
struct saa7146_buf *buf,
|
|
struct saa7146_buf *next)
|
|
{
|
|
struct saa7146_vv *vv = dev->vv_data;
|
|
buf->vb.state = VIDEOBUF_ACTIVE;
|
|
|
|
DEB_VBI(("dev:%p, buf:%p, next:%p\n",dev,buf,next));
|
|
saa7146_set_vbi_capture(dev,buf,next);
|
|
|
|
mod_timer(&vv->vbi_q.timeout, jiffies+BUFFER_TIMEOUT);
|
|
return 0;
|
|
}
|
|
|
|
static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field)
|
|
{
|
|
struct file *file = q->priv_data;
|
|
struct saa7146_fh *fh = file->private_data;
|
|
struct saa7146_dev *dev = fh->dev;
|
|
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
|
|
|
|
int err = 0;
|
|
int lines, llength, size;
|
|
|
|
lines = 16 * 2 ; /* 2 fields */
|
|
llength = vbi_pixel_to_capture;
|
|
size = lines * llength;
|
|
|
|
DEB_VBI(("vb:%p\n",vb));
|
|
|
|
if (0 != buf->vb.baddr && buf->vb.bsize < size) {
|
|
DEB_VBI(("size mismatch.\n"));
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (buf->vb.size != size)
|
|
saa7146_dma_free(dev,q,buf);
|
|
|
|
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
|
|
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
|
|
|
|
buf->vb.width = llength;
|
|
buf->vb.height = lines;
|
|
buf->vb.size = size;
|
|
buf->vb.field = field; // FIXME: check this
|
|
|
|
saa7146_pgtable_free(dev->pci, &buf->pt[2]);
|
|
saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
|
|
|
|
err = videobuf_iolock(q,&buf->vb, NULL);
|
|
if (err)
|
|
goto oops;
|
|
err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2],
|
|
dma->sglist, dma->sglen);
|
|
if (0 != err)
|
|
return err;
|
|
}
|
|
buf->vb.state = VIDEOBUF_PREPARED;
|
|
buf->activate = buffer_activate;
|
|
|
|
return 0;
|
|
|
|
oops:
|
|
DEB_VBI(("error out.\n"));
|
|
saa7146_dma_free(dev,q,buf);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
|
|
{
|
|
int llength,lines;
|
|
|
|
lines = 16 * 2 ; /* 2 fields */
|
|
llength = vbi_pixel_to_capture;
|
|
|
|
*size = lines * llength;
|
|
*count = 2;
|
|
|
|
DEB_VBI(("count:%d, size:%d\n",*count,*size));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
|
|
{
|
|
struct file *file = q->priv_data;
|
|
struct saa7146_fh *fh = file->private_data;
|
|
struct saa7146_dev *dev = fh->dev;
|
|
struct saa7146_vv *vv = dev->vv_data;
|
|
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
|
|
|
|
DEB_VBI(("vb:%p\n",vb));
|
|
saa7146_buffer_queue(dev,&vv->vbi_q,buf);
|
|
}
|
|
|
|
static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
|
|
{
|
|
struct file *file = q->priv_data;
|
|
struct saa7146_fh *fh = file->private_data;
|
|
struct saa7146_dev *dev = fh->dev;
|
|
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
|
|
|
|
DEB_VBI(("vb:%p\n",vb));
|
|
saa7146_dma_free(dev,q,buf);
|
|
}
|
|
|
|
static struct videobuf_queue_ops vbi_qops = {
|
|
.buf_setup = buffer_setup,
|
|
.buf_prepare = buffer_prepare,
|
|
.buf_queue = buffer_queue,
|
|
.buf_release = buffer_release,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static void vbi_stop(struct saa7146_fh *fh, struct file *file)
|
|
{
|
|
struct saa7146_dev *dev = fh->dev;
|
|
struct saa7146_vv *vv = dev->vv_data;
|
|
unsigned long flags;
|
|
DEB_VBI(("dev:%p, fh:%p\n",dev, fh));
|
|
|
|
spin_lock_irqsave(&dev->slock,flags);
|
|
|
|
/* disable rps1 */
|
|
saa7146_write(dev, MC1, MASK_29);
|
|
|
|
/* disable rps1 irqs */
|
|
SAA7146_IER_DISABLE(dev, MASK_28);
|
|
|
|
/* shut down dma 3 transfers */
|
|
saa7146_write(dev, MC1, MASK_20);
|
|
|
|
if (vv->vbi_q.curr) {
|
|
saa7146_buffer_finish(dev,&vv->vbi_q,VIDEOBUF_DONE);
|
|
}
|
|
|
|
videobuf_queue_cancel(&fh->vbi_q);
|
|
|
|
vv->vbi_streaming = NULL;
|
|
|
|
del_timer(&vv->vbi_q.timeout);
|
|
del_timer(&fh->vbi_read_timeout);
|
|
|
|
spin_unlock_irqrestore(&dev->slock, flags);
|
|
}
|
|
|
|
static void vbi_read_timeout(unsigned long data)
|
|
{
|
|
struct file *file = (struct file*)data;
|
|
struct saa7146_fh *fh = file->private_data;
|
|
struct saa7146_dev *dev = fh->dev;
|
|
|
|
DEB_VBI(("dev:%p, fh:%p\n",dev, fh));
|
|
|
|
vbi_stop(fh, file);
|
|
}
|
|
|
|
static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
|
|
{
|
|
DEB_VBI(("dev:%p\n",dev));
|
|
|
|
INIT_LIST_HEAD(&vv->vbi_q.queue);
|
|
|
|
init_timer(&vv->vbi_q.timeout);
|
|
vv->vbi_q.timeout.function = saa7146_buffer_timeout;
|
|
vv->vbi_q.timeout.data = (unsigned long)(&vv->vbi_q);
|
|
vv->vbi_q.dev = dev;
|
|
|
|
init_waitqueue_head(&vv->vbi_wq);
|
|
}
|
|
|
|
static int vbi_open(struct saa7146_dev *dev, struct file *file)
|
|
{
|
|
struct saa7146_fh *fh = (struct saa7146_fh *)file->private_data;
|
|
|
|
u32 arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
|
|
int ret = 0;
|
|
|
|
DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
|
|
|
|
ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS);
|
|
if (0 == ret) {
|
|
DEB_S(("cannot get vbi RESOURCE_DMA3_BRS resource\n"));
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* adjust arbitrition control for video dma 3 */
|
|
arbtr_ctrl &= ~0x1f0000;
|
|
arbtr_ctrl |= 0x1d0000;
|
|
saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
|
|
saa7146_write(dev, MC2, (MASK_04|MASK_20));
|
|
|
|
memset(&fh->vbi_fmt,0,sizeof(fh->vbi_fmt));
|
|
|
|
fh->vbi_fmt.sampling_rate = 27000000;
|
|
fh->vbi_fmt.offset = 248; /* todo */
|
|
fh->vbi_fmt.samples_per_line = vbi_pixel_to_capture;
|
|
fh->vbi_fmt.sample_format = V4L2_PIX_FMT_GREY;
|
|
|
|
/* fixme: this only works for PAL */
|
|
fh->vbi_fmt.start[0] = 5;
|
|
fh->vbi_fmt.count[0] = 16;
|
|
fh->vbi_fmt.start[1] = 312;
|
|
fh->vbi_fmt.count[1] = 16;
|
|
|
|
videobuf_queue_pci_init(&fh->vbi_q, &vbi_qops,
|
|
dev->pci, &dev->slock,
|
|
V4L2_BUF_TYPE_VBI_CAPTURE,
|
|
V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
|
|
sizeof(struct saa7146_buf),
|
|
file);
|
|
|
|
init_timer(&fh->vbi_read_timeout);
|
|
fh->vbi_read_timeout.function = vbi_read_timeout;
|
|
fh->vbi_read_timeout.data = (unsigned long)file;
|
|
|
|
/* initialize the brs */
|
|
if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
|
|
saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19));
|
|
} else {
|
|
saa7146_write(dev, BRS_CTRL, 0x00000001);
|
|
|
|
if (0 != (ret = vbi_workaround(dev))) {
|
|
DEB_VBI(("vbi workaround failed!\n"));
|
|
/* return ret;*/
|
|
}
|
|
}
|
|
|
|
/* upload brs register */
|
|
saa7146_write(dev, MC2, (MASK_08|MASK_24));
|
|
return 0;
|
|
}
|
|
|
|
static void vbi_close(struct saa7146_dev *dev, struct file *file)
|
|
{
|
|
struct saa7146_fh *fh = (struct saa7146_fh *)file->private_data;
|
|
struct saa7146_vv *vv = dev->vv_data;
|
|
DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
|
|
|
|
if( fh == vv->vbi_streaming ) {
|
|
vbi_stop(fh, file);
|
|
}
|
|
saa7146_res_free(fh, RESOURCE_DMA3_BRS);
|
|
}
|
|
|
|
static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status)
|
|
{
|
|
struct saa7146_vv *vv = dev->vv_data;
|
|
spin_lock(&dev->slock);
|
|
|
|
if (vv->vbi_q.curr) {
|
|
DEB_VBI(("dev:%p, curr:%p\n",dev,vv->vbi_q.curr));
|
|
/* this must be += 2, one count for each field */
|
|
vv->vbi_fieldcount+=2;
|
|
vv->vbi_q.curr->vb.field_count = vv->vbi_fieldcount;
|
|
saa7146_buffer_finish(dev,&vv->vbi_q,VIDEOBUF_DONE);
|
|
} else {
|
|
DEB_VBI(("dev:%p\n",dev));
|
|
}
|
|
saa7146_buffer_next(dev,&vv->vbi_q,1);
|
|
|
|
spin_unlock(&dev->slock);
|
|
}
|
|
|
|
static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
|
|
{
|
|
struct saa7146_fh *fh = file->private_data;
|
|
struct saa7146_dev *dev = fh->dev;
|
|
struct saa7146_vv *vv = dev->vv_data;
|
|
ssize_t ret = 0;
|
|
|
|
DEB_VBI(("dev:%p, fh:%p\n",dev,fh));
|
|
|
|
if( NULL == vv->vbi_streaming ) {
|
|
// fixme: check if dma3 is available
|
|
// fixme: activate vbi engine here if necessary. (really?)
|
|
vv->vbi_streaming = fh;
|
|
}
|
|
|
|
if( fh != vv->vbi_streaming ) {
|
|
DEB_VBI(("open %p is already using vbi capture.",vv->vbi_streaming));
|
|
return -EBUSY;
|
|
}
|
|
|
|
mod_timer(&fh->vbi_read_timeout, jiffies+BUFFER_TIMEOUT);
|
|
ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1,
|
|
file->f_flags & O_NONBLOCK);
|
|
/*
|
|
printk("BASE_ODD3: 0x%08x\n", saa7146_read(dev, BASE_ODD3));
|
|
printk("BASE_EVEN3: 0x%08x\n", saa7146_read(dev, BASE_EVEN3));
|
|
printk("PROT_ADDR3: 0x%08x\n", saa7146_read(dev, PROT_ADDR3));
|
|
printk("PITCH3: 0x%08x\n", saa7146_read(dev, PITCH3));
|
|
printk("BASE_PAGE3: 0x%08x\n", saa7146_read(dev, BASE_PAGE3));
|
|
printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3));
|
|
printk("BRS_CTRL: 0x%08x\n", saa7146_read(dev, BRS_CTRL));
|
|
*/
|
|
return ret;
|
|
}
|
|
|
|
struct saa7146_use_ops saa7146_vbi_uops = {
|
|
.init = vbi_init,
|
|
.open = vbi_open,
|
|
.release = vbi_close,
|
|
.irq_done = vbi_irq_done,
|
|
.read = vbi_read,
|
|
};
|