371 lines
8.9 KiB
C
371 lines
8.9 KiB
C
/*
|
|
* MPC8544 DS Board Setup
|
|
*
|
|
* Author Xianghua Xiao (x.xiao@freescale.com)
|
|
* Roy Zang <tie-fei.zang@freescale.com>
|
|
* - Add PCI/PCI Exprees support
|
|
* Copyright 2007 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/time.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/mpc85xx.h>
|
|
#include <mm/mmu_decl.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/mpic.h>
|
|
#include <asm/i8259.h>
|
|
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/fsl_pci.h>
|
|
#include "mpc85xx.h"
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
|
|
#else
|
|
#define DBG(fmt, args...)
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_I8259
|
|
static void mpc8544_8259_cascade(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned int cascade_irq = i8259_irq();
|
|
|
|
if (cascade_irq != NO_IRQ) {
|
|
generic_handle_irq(cascade_irq);
|
|
}
|
|
desc->chip->eoi(irq);
|
|
}
|
|
#endif /* CONFIG_PPC_I8259 */
|
|
|
|
void __init mpc8544_ds_pic_init(void)
|
|
{
|
|
struct mpic *mpic;
|
|
struct resource r;
|
|
struct device_node *np = NULL;
|
|
#ifdef CONFIG_PPC_I8259
|
|
struct device_node *cascade_node = NULL;
|
|
int cascade_irq;
|
|
#endif
|
|
|
|
np = of_find_node_by_type(np, "open-pic");
|
|
|
|
if (np == NULL) {
|
|
printk(KERN_ERR "Could not find open-pic node\n");
|
|
return;
|
|
}
|
|
|
|
if (of_address_to_resource(np, 0, &r)) {
|
|
printk(KERN_ERR "Failed to map mpic register space\n");
|
|
of_node_put(np);
|
|
return;
|
|
}
|
|
|
|
mpic = mpic_alloc(np, r.start,
|
|
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
|
|
0, 256, " OpenPIC ");
|
|
BUG_ON(mpic == NULL);
|
|
|
|
mpic_init(mpic);
|
|
|
|
#ifdef CONFIG_PPC_I8259
|
|
/* Initialize the i8259 controller */
|
|
for_each_node_by_type(np, "interrupt-controller")
|
|
if (of_device_is_compatible(np, "chrp,iic")) {
|
|
cascade_node = np;
|
|
break;
|
|
}
|
|
|
|
if (cascade_node == NULL) {
|
|
printk(KERN_DEBUG "Could not find i8259 PIC\n");
|
|
return;
|
|
}
|
|
|
|
cascade_irq = irq_of_parse_and_map(cascade_node, 0);
|
|
if (cascade_irq == NO_IRQ) {
|
|
printk(KERN_ERR "Failed to map cascade interrupt\n");
|
|
return;
|
|
}
|
|
|
|
DBG("mpc8544ds: cascade mapped to irq %d\n", cascade_irq);
|
|
|
|
i8259_init(cascade_node, 0);
|
|
of_node_put(cascade_node);
|
|
|
|
set_irq_chained_handler(cascade_irq, mpc8544_8259_cascade);
|
|
#endif /* CONFIG_PPC_I8259 */
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH };
|
|
|
|
/*
|
|
* Value in table -- IRQ number
|
|
*/
|
|
const unsigned char uli1575_irq_route_table[16] = {
|
|
0, /* 0: Reserved */
|
|
0x8,
|
|
0, /* 2: Reserved */
|
|
0x2,
|
|
0x4,
|
|
0x5,
|
|
0x7,
|
|
0x6,
|
|
0, /* 8: Reserved */
|
|
0x1,
|
|
0x3,
|
|
0x9,
|
|
0xb,
|
|
0, /* 13: Reserved */
|
|
0xd,
|
|
0xf,
|
|
};
|
|
|
|
static int __devinit
|
|
get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
|
|
{
|
|
struct of_irq oirq;
|
|
u32 laddr[3];
|
|
struct device_node *hosenode = hose ? hose->arch_data : NULL;
|
|
|
|
if (!hosenode)
|
|
return -EINVAL;
|
|
|
|
laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
|
|
laddr[1] = laddr[2] = 0;
|
|
of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
|
|
DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n",
|
|
laddr[0], slot, pin, oirq.specifier[0]);
|
|
return oirq.specifier[0];
|
|
}
|
|
|
|
/*8259*/
|
|
static void __devinit quirk_uli1575(struct pci_dev *dev)
|
|
{
|
|
unsigned short temp;
|
|
struct pci_controller *hose = pci_bus_to_host(dev->bus);
|
|
unsigned char irq2pin[16];
|
|
unsigned long pirq_map_word = 0;
|
|
u32 irq;
|
|
int i;
|
|
|
|
/*
|
|
* ULI1575 interrupts route setup
|
|
*/
|
|
memset(irq2pin, 0, 16); /* Initialize default value 0 */
|
|
|
|
irq2pin[6]=PIRQA+3; /* enabled mapping for IRQ6 to PIRQD, used by SATA */
|
|
|
|
/*
|
|
* PIRQE -> PIRQF mapping set manually
|
|
*
|
|
* IRQ pin IRQ#
|
|
* PIRQE ---- 9
|
|
* PIRQF ---- 10
|
|
* PIRQG ---- 11
|
|
* PIRQH ---- 12
|
|
*/
|
|
for (i = 0; i < 4; i++)
|
|
irq2pin[i + 9] = PIRQE + i;
|
|
|
|
/* Set IRQ-PIRQ Mapping to ULI1575 */
|
|
for (i = 0; i < 16; i++)
|
|
if (irq2pin[i])
|
|
pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
|
|
<< ((irq2pin[i] - PIRQA) * 4);
|
|
|
|
pirq_map_word |= 1<<26; /* disable INTx in EP mode*/
|
|
|
|
/* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
|
|
DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
|
|
(int)pirq_map_word);
|
|
pci_write_config_dword(dev, 0x48, pirq_map_word);
|
|
|
|
#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \
|
|
do { \
|
|
int irq; \
|
|
irq = get_pci_irq_from_of(hose, slot, pin); \
|
|
if (irq > 0 && irq < 16) \
|
|
pci_write_config_byte(dev, reg, irq2pin[irq]); \
|
|
else \
|
|
printk(KERN_WARNING "ULI1575 device" \
|
|
"(slot %d, pin %d) irq %d is invalid.\n", \
|
|
slot, pin, irq); \
|
|
} while(0)
|
|
|
|
/* USB 1.1 OHCI controller 1, slot 28, pin 1 */
|
|
ULI1575_SET_DEV_IRQ(28, 1, 0x86);
|
|
|
|
/* USB 1.1 OHCI controller 2, slot 28, pin 2 */
|
|
ULI1575_SET_DEV_IRQ(28, 2, 0x87);
|
|
|
|
/* USB 1.1 OHCI controller 3, slot 28, pin 3 */
|
|
ULI1575_SET_DEV_IRQ(28, 3, 0x88);
|
|
|
|
/* USB 2.0 controller, slot 28, pin 4 */
|
|
irq = get_pci_irq_from_of(hose, 28, 4);
|
|
if (irq >= 0 && irq <= 15)
|
|
pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
|
|
|
|
/* Audio controller, slot 29, pin 1 */
|
|
ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
|
|
|
|
/* Modem controller, slot 29, pin 2 */
|
|
ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
|
|
|
|
/* HD audio controller, slot 29, pin 3 */
|
|
ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
|
|
|
|
/* SMB interrupt: slot 30, pin 1 */
|
|
ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
|
|
|
|
/* PMU ACPI SCI interrupt: slot 30, pin 2 */
|
|
ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
|
|
|
|
/* Serial ATA interrupt: slot 31, pin 1 */
|
|
ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
|
|
|
|
/* Primary PATA IDE IRQ: 14
|
|
* Secondary PATA IDE IRQ: 15
|
|
*/
|
|
pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
|
|
pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
|
|
|
|
/* Set IRQ14 and IRQ15 to legacy IRQs */
|
|
pci_read_config_word(dev, 0x46, &temp);
|
|
temp |= 0xc000;
|
|
pci_write_config_word(dev, 0x46, temp);
|
|
|
|
/* Set i8259 interrupt trigger
|
|
* IRQ 3: Level
|
|
* IRQ 4: Level
|
|
* IRQ 5: Level
|
|
* IRQ 6: Level
|
|
* IRQ 7: Level
|
|
* IRQ 9: Level
|
|
* IRQ 10: Level
|
|
* IRQ 11: Level
|
|
* IRQ 12: Level
|
|
* IRQ 14: Edge
|
|
* IRQ 15: Edge
|
|
*/
|
|
outb(0xfa, 0x4d0);
|
|
outb(0x1e, 0x4d1);
|
|
|
|
#undef ULI1575_SET_DEV_IRQ
|
|
}
|
|
|
|
/* SATA */
|
|
static void __devinit quirk_uli5288(struct pci_dev *dev)
|
|
{
|
|
unsigned char c;
|
|
|
|
pci_read_config_byte(dev, 0x83, &c);
|
|
c |= 0x80; /* read/write lock */
|
|
pci_write_config_byte(dev, 0x83, c);
|
|
|
|
pci_write_config_byte(dev, 0x09, 0x01); /* Base class code: storage */
|
|
pci_write_config_byte(dev, 0x0a, 0x06); /* IDE disk */
|
|
|
|
pci_read_config_byte(dev, 0x83, &c);
|
|
c &= 0x7f;
|
|
pci_write_config_byte(dev, 0x83, c);
|
|
|
|
pci_read_config_byte(dev, 0x84, &c);
|
|
c |= 0x01; /* emulated PATA mode enabled */
|
|
pci_write_config_byte(dev, 0x84, c);
|
|
}
|
|
|
|
/* PATA */
|
|
static void __devinit quirk_uli5229(struct pci_dev *dev)
|
|
{
|
|
unsigned short temp;
|
|
pci_write_config_word(dev, 0x04, 0x0405); /* MEM IO MSI */
|
|
pci_read_config_word(dev, 0x4a, &temp);
|
|
temp |= 0x1000; /* Enable Native IRQ 14/15 */
|
|
pci_write_config_word(dev, 0x4a, temp);
|
|
}
|
|
|
|
/*Bridge*/
|
|
static void __devinit early_uli5249(struct pci_dev *dev)
|
|
{
|
|
unsigned char temp;
|
|
pci_write_config_word(dev, 0x04, 0x0007); /* mem access */
|
|
pci_read_config_byte(dev, 0x7c, &temp);
|
|
pci_write_config_byte(dev, 0x7c, 0x80); /* R/W lock control */
|
|
pci_write_config_byte(dev, 0x09, 0x01); /* set as pci-pci bridge */
|
|
pci_write_config_byte(dev, 0x7c, temp); /* restore pci bus debug control */
|
|
dev->class |= 0x1;
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/*
|
|
* Setup the architecture
|
|
*/
|
|
static void __init mpc8544_ds_setup_arch(void)
|
|
{
|
|
#ifdef CONFIG_PCI
|
|
struct device_node *np;
|
|
#endif
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc8544_ds_setup_arch()", 0);
|
|
|
|
#ifdef CONFIG_PCI
|
|
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
|
|
struct resource rsrc;
|
|
of_address_to_resource(np, 0, &rsrc);
|
|
if ((rsrc.start & 0xfffff) == 0xb000)
|
|
fsl_add_bridge(np, 1);
|
|
else
|
|
fsl_add_bridge(np, 0);
|
|
}
|
|
#endif
|
|
|
|
printk("MPC8544 DS board from Freescale Semiconductor\n");
|
|
}
|
|
|
|
/*
|
|
* Called very early, device-tree isn't unflattened
|
|
*/
|
|
static int __init mpc8544_ds_probe(void)
|
|
{
|
|
unsigned long root = of_get_flat_dt_root();
|
|
|
|
return of_flat_dt_is_compatible(root, "MPC8544DS");
|
|
}
|
|
|
|
define_machine(mpc8544_ds) {
|
|
.name = "MPC8544 DS",
|
|
.probe = mpc8544_ds_probe,
|
|
.setup_arch = mpc8544_ds_setup_arch,
|
|
.init_IRQ = mpc8544_ds_pic_init,
|
|
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
|
.get_irq = mpic_get_irq,
|
|
.restart = mpc85xx_restart,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
};
|