linux_old1/drivers/regulator/lp87565-regulator.c

209 lines
6.3 KiB
C

/*
* Regulator driver for LP87565 PMIC
*
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation version 2.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/lp87565.h>
#define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
_delay, _lr, _cr) \
[_id] = { \
.desc = { \
.name = _name, \
.supply_name = _of "-in", \
.id = _id, \
.of_match = of_match_ptr(_of), \
.regulators_node = of_match_ptr("regulators"),\
.ops = &_ops, \
.n_voltages = _n, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.vsel_reg = _vr, \
.vsel_mask = _vm, \
.enable_reg = _er, \
.enable_mask = _em, \
.ramp_delay = _delay, \
.linear_ranges = _lr, \
.n_linear_ranges = ARRAY_SIZE(_lr), \
.curr_table = lp87565_buck_uA, \
.n_current_limits = ARRAY_SIZE(lp87565_buck_uA),\
.csel_reg = (_cr), \
.csel_mask = LP87565_BUCK_CTRL_2_ILIM, \
}, \
.ctrl2_reg = _cr, \
}
struct lp87565_regulator {
struct regulator_desc desc;
unsigned int ctrl2_reg;
};
static const struct lp87565_regulator regulators[];
static const struct regulator_linear_range buck0_1_2_3_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000),
REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
};
static const unsigned int lp87565_buck_ramp_delay[] = {
30000, 15000, 10000, 7500, 3800, 1900, 940, 470
};
/* LP87565 BUCK current limit */
static const unsigned int lp87565_buck_uA[] = {
1500000, 2000000, 2500000, 3000000, 3500000, 4000000, 4500000, 5000000,
};
static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
int id = rdev_get_id(rdev);
struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
unsigned int reg;
int ret;
if (ramp_delay <= 470)
reg = 7;
else if (ramp_delay <= 940)
reg = 6;
else if (ramp_delay <= 1900)
reg = 5;
else if (ramp_delay <= 3800)
reg = 4;
else if (ramp_delay <= 7500)
reg = 3;
else if (ramp_delay <= 10000)
reg = 2;
else if (ramp_delay <= 15000)
reg = 1;
else
reg = 0;
ret = regmap_update_bits(lp87565->regmap, regulators[id].ctrl2_reg,
LP87565_BUCK_CTRL_2_SLEW_RATE,
reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE));
if (ret) {
dev_err(lp87565->dev, "SLEW RATE write failed: %d\n", ret);
return ret;
}
rdev->constraints->ramp_delay = lp87565_buck_ramp_delay[reg];
/* Conservatively give a 15% margin */
rdev->constraints->ramp_delay =
rdev->constraints->ramp_delay * 85 / 100;
return 0;
}
/* Operations permitted on BUCKs */
static const struct regulator_ops lp87565_buck_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = lp87565_buck_set_ramp_delay,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
static const struct lp87565_regulator regulators[] = {
LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops,
256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK0_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3230,
buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops,
256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK1_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3230,
buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2),
LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops,
256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK2_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3230,
buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops,
256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK3_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3230,
buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2),
LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops,
256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK0_CTRL_1,
LP87565_BUCK_CTRL_1_EN |
LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230,
buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops,
256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK2_CTRL_1,
LP87565_BUCK_CTRL_1_EN, 3230,
buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
};
static int lp87565_regulator_probe(struct platform_device *pdev)
{
struct lp87565 *lp87565 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
int i, min_idx = LP87565_BUCK_0, max_idx = LP87565_BUCK_3;
platform_set_drvdata(pdev, lp87565);
config.dev = &pdev->dev;
config.dev->of_node = lp87565->dev->of_node;
config.driver_data = lp87565;
config.regmap = lp87565->regmap;
if (lp87565->dev_type == LP87565_DEVICE_TYPE_LP87565_Q1) {
min_idx = LP87565_BUCK_10;
max_idx = LP87565_BUCK_23;
}
for (i = min_idx; i <= max_idx; i++) {
rdev = devm_regulator_register(&pdev->dev, &regulators[i].desc,
&config);
if (IS_ERR(rdev)) {
dev_err(lp87565->dev, "failed to register %s regulator\n",
pdev->name);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id lp87565_regulator_id_table[] = {
{ "lp87565-regulator", },
{ "lp87565-q1-regulator", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, lp87565_regulator_id_table);
static struct platform_driver lp87565_regulator_driver = {
.driver = {
.name = "lp87565-pmic",
},
.probe = lp87565_regulator_probe,
.id_table = lp87565_regulator_id_table,
};
module_platform_driver(lp87565_regulator_driver);
MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
MODULE_DESCRIPTION("LP87565 voltage regulator driver");
MODULE_LICENSE("GPL v2");