326 lines
8.9 KiB
C
326 lines
8.9 KiB
C
/*
|
|
* Copyright (C) 2012 Avionic Design GmbH
|
|
* Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include "drm.h"
|
|
#include "dc.h"
|
|
|
|
struct tegra_rgb {
|
|
struct tegra_output output;
|
|
struct tegra_dc *dc;
|
|
bool enabled;
|
|
|
|
struct clk *clk_parent;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static inline struct tegra_rgb *to_rgb(struct tegra_output *output)
|
|
{
|
|
return container_of(output, struct tegra_rgb, output);
|
|
}
|
|
|
|
struct reg_entry {
|
|
unsigned long offset;
|
|
unsigned long value;
|
|
};
|
|
|
|
static const struct reg_entry rgb_enable[] = {
|
|
{ DC_COM_PIN_OUTPUT_ENABLE(0), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_ENABLE(1), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_ENABLE(2), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_ENABLE(3), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_POLARITY(1), 0x01000000 },
|
|
{ DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_DATA(0), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_DATA(1), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_DATA(2), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_DATA(3), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(4), 0x00210222 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(5), 0x00002200 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(6), 0x00020000 },
|
|
};
|
|
|
|
static const struct reg_entry rgb_disable[] = {
|
|
{ DC_COM_PIN_OUTPUT_SELECT(6), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(5), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(4), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_DATA(3), 0xaaaaaaaa },
|
|
{ DC_COM_PIN_OUTPUT_DATA(2), 0xaaaaaaaa },
|
|
{ DC_COM_PIN_OUTPUT_DATA(1), 0xaaaaaaaa },
|
|
{ DC_COM_PIN_OUTPUT_DATA(0), 0xaaaaaaaa },
|
|
{ DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_POLARITY(1), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 },
|
|
{ DC_COM_PIN_OUTPUT_ENABLE(3), 0x55555555 },
|
|
{ DC_COM_PIN_OUTPUT_ENABLE(2), 0x55555555 },
|
|
{ DC_COM_PIN_OUTPUT_ENABLE(1), 0x55150005 },
|
|
{ DC_COM_PIN_OUTPUT_ENABLE(0), 0x55555555 },
|
|
};
|
|
|
|
static void tegra_dc_write_regs(struct tegra_dc *dc,
|
|
const struct reg_entry *table,
|
|
unsigned int num)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < num; i++)
|
|
tegra_dc_writel(dc, table[i].value, table[i].offset);
|
|
}
|
|
|
|
static int tegra_output_rgb_enable(struct tegra_output *output)
|
|
{
|
|
struct tegra_rgb *rgb = to_rgb(output);
|
|
unsigned long value;
|
|
|
|
if (rgb->enabled)
|
|
return 0;
|
|
|
|
tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable));
|
|
|
|
value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL;
|
|
tegra_dc_writel(rgb->dc, value, DC_DISP_DATA_ENABLE_OPTIONS);
|
|
|
|
/* XXX: parameterize? */
|
|
value = tegra_dc_readl(rgb->dc, DC_COM_PIN_OUTPUT_POLARITY(1));
|
|
value &= ~LVS_OUTPUT_POLARITY_LOW;
|
|
value &= ~LHS_OUTPUT_POLARITY_LOW;
|
|
tegra_dc_writel(rgb->dc, value, DC_COM_PIN_OUTPUT_POLARITY(1));
|
|
|
|
/* XXX: parameterize? */
|
|
value = DISP_DATA_FORMAT_DF1P1C | DISP_ALIGNMENT_MSB |
|
|
DISP_ORDER_RED_BLUE;
|
|
tegra_dc_writel(rgb->dc, value, DC_DISP_DISP_INTERFACE_CONTROL);
|
|
|
|
/* XXX: parameterize? */
|
|
value = SC0_H_QUALIFIER_NONE | SC1_H_QUALIFIER_NONE;
|
|
tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS);
|
|
|
|
value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_COMMAND);
|
|
value &= ~DISP_CTRL_MODE_MASK;
|
|
value |= DISP_CTRL_MODE_C_DISPLAY;
|
|
tegra_dc_writel(rgb->dc, value, DC_CMD_DISPLAY_COMMAND);
|
|
|
|
value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_POWER_CONTROL);
|
|
value |= PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE |
|
|
PW4_ENABLE | PM0_ENABLE | PM1_ENABLE;
|
|
tegra_dc_writel(rgb->dc, value, DC_CMD_DISPLAY_POWER_CONTROL);
|
|
|
|
tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ << 8, DC_CMD_STATE_CONTROL);
|
|
tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ, DC_CMD_STATE_CONTROL);
|
|
|
|
rgb->enabled = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_output_rgb_disable(struct tegra_output *output)
|
|
{
|
|
struct tegra_rgb *rgb = to_rgb(output);
|
|
unsigned long value;
|
|
|
|
if (!rgb->enabled)
|
|
return 0;
|
|
|
|
value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_POWER_CONTROL);
|
|
value &= ~(PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE |
|
|
PW4_ENABLE | PM0_ENABLE | PM1_ENABLE);
|
|
tegra_dc_writel(rgb->dc, value, DC_CMD_DISPLAY_POWER_CONTROL);
|
|
|
|
value = tegra_dc_readl(rgb->dc, DC_CMD_DISPLAY_COMMAND);
|
|
value &= ~DISP_CTRL_MODE_MASK;
|
|
tegra_dc_writel(rgb->dc, value, DC_CMD_DISPLAY_COMMAND);
|
|
|
|
tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ << 8, DC_CMD_STATE_CONTROL);
|
|
tegra_dc_writel(rgb->dc, GENERAL_ACT_REQ, DC_CMD_STATE_CONTROL);
|
|
|
|
tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable));
|
|
|
|
rgb->enabled = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_output_rgb_setup_clock(struct tegra_output *output,
|
|
struct clk *clk, unsigned long pclk,
|
|
unsigned int *div)
|
|
{
|
|
struct tegra_rgb *rgb = to_rgb(output);
|
|
int err;
|
|
|
|
err = clk_set_parent(clk, rgb->clk_parent);
|
|
if (err < 0) {
|
|
dev_err(output->dev, "failed to set parent: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* We may not want to change the frequency of the parent clock, since
|
|
* it may be a parent for other peripherals. This is due to the fact
|
|
* that on Tegra20 there's only a single clock dedicated to display
|
|
* (pll_d_out0), whereas later generations have a second one that can
|
|
* be used to independently drive a second output (pll_d2_out0).
|
|
*
|
|
* As a way to support multiple outputs on Tegra20 as well, pll_p is
|
|
* typically used as the parent clock for the display controllers.
|
|
* But this comes at a cost: pll_p is the parent of several other
|
|
* peripherals, so its frequency shouldn't change out of the blue.
|
|
*
|
|
* The best we can do at this point is to use the shift clock divider
|
|
* and hope that the desired frequency can be matched (or at least
|
|
* matched sufficiently close that the panel will still work).
|
|
*/
|
|
|
|
*div = ((clk_get_rate(clk) * 2) / pclk) - 2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_output_rgb_check_mode(struct tegra_output *output,
|
|
struct drm_display_mode *mode,
|
|
enum drm_mode_status *status)
|
|
{
|
|
/*
|
|
* FIXME: For now, always assume that the mode is okay. There are
|
|
* unresolved issues with clk_round_rate(), which doesn't always
|
|
* reliably report whether a frequency can be set or not.
|
|
*/
|
|
|
|
*status = MODE_OK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct tegra_output_ops rgb_ops = {
|
|
.enable = tegra_output_rgb_enable,
|
|
.disable = tegra_output_rgb_disable,
|
|
.setup_clock = tegra_output_rgb_setup_clock,
|
|
.check_mode = tegra_output_rgb_check_mode,
|
|
};
|
|
|
|
int tegra_dc_rgb_probe(struct tegra_dc *dc)
|
|
{
|
|
struct device_node *np;
|
|
struct tegra_rgb *rgb;
|
|
int err;
|
|
|
|
np = of_get_child_by_name(dc->dev->of_node, "rgb");
|
|
if (!np || !of_device_is_available(np))
|
|
return -ENODEV;
|
|
|
|
rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL);
|
|
if (!rgb)
|
|
return -ENOMEM;
|
|
|
|
rgb->output.dev = dc->dev;
|
|
rgb->output.of_node = np;
|
|
rgb->dc = dc;
|
|
|
|
err = tegra_output_probe(&rgb->output);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
rgb->clk = devm_clk_get(dc->dev, NULL);
|
|
if (IS_ERR(rgb->clk)) {
|
|
dev_err(dc->dev, "failed to get clock\n");
|
|
return PTR_ERR(rgb->clk);
|
|
}
|
|
|
|
rgb->clk_parent = devm_clk_get(dc->dev, "parent");
|
|
if (IS_ERR(rgb->clk_parent)) {
|
|
dev_err(dc->dev, "failed to get parent clock\n");
|
|
return PTR_ERR(rgb->clk_parent);
|
|
}
|
|
|
|
err = clk_set_parent(rgb->clk, rgb->clk_parent);
|
|
if (err < 0) {
|
|
dev_err(dc->dev, "failed to set parent clock: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
dc->rgb = &rgb->output;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra_dc_rgb_remove(struct tegra_dc *dc)
|
|
{
|
|
int err;
|
|
|
|
if (!dc->rgb)
|
|
return 0;
|
|
|
|
err = tegra_output_remove(dc->rgb);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
|
|
{
|
|
struct tegra_rgb *rgb = to_rgb(dc->rgb);
|
|
int err;
|
|
|
|
if (!dc->rgb)
|
|
return -ENODEV;
|
|
|
|
rgb->output.type = TEGRA_OUTPUT_RGB;
|
|
rgb->output.ops = &rgb_ops;
|
|
|
|
err = tegra_output_init(dc->base.dev, &rgb->output);
|
|
if (err < 0) {
|
|
dev_err(dc->dev, "output setup failed: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* By default, outputs can be associated with each display controller.
|
|
* RGB outputs are an exception, so we make sure they can be attached
|
|
* to only their parent display controller.
|
|
*/
|
|
rgb->output.encoder.possible_crtcs = drm_crtc_mask(&dc->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra_dc_rgb_exit(struct tegra_dc *dc)
|
|
{
|
|
if (dc->rgb) {
|
|
int err;
|
|
|
|
err = tegra_output_disable(dc->rgb);
|
|
if (err < 0) {
|
|
dev_err(dc->dev, "output failed to disable: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = tegra_output_exit(dc->rgb);
|
|
if (err < 0) {
|
|
dev_err(dc->dev, "output cleanup failed: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
dc->rgb = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|