734 lines
19 KiB
C
734 lines
19 KiB
C
/*
|
|
* TI OMAP Real Time Clock interface for Linux
|
|
*
|
|
* Copyright (C) 2003 MontaVista Software, Inc.
|
|
* Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
|
|
*
|
|
* Copyright (C) 2006 David Brownell (new RTC framework)
|
|
* Copyright (C) 2014 Johan Hovold <johan@kernel.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/io.h>
|
|
|
|
/*
|
|
* The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock
|
|
* with century-range alarm matching, driven by the 32kHz clock.
|
|
*
|
|
* The main user-visible ways it differs from PC RTCs are by omitting
|
|
* "don't care" alarm fields and sub-second periodic IRQs, and having
|
|
* an autoadjust mechanism to calibrate to the true oscillator rate.
|
|
*
|
|
* Board-specific wiring options include using split power mode with
|
|
* RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
|
|
* and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
|
|
* low power modes) for OMAP1 boards (OMAP-L138 has this built into
|
|
* the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment.
|
|
*/
|
|
|
|
/* RTC registers */
|
|
#define OMAP_RTC_SECONDS_REG 0x00
|
|
#define OMAP_RTC_MINUTES_REG 0x04
|
|
#define OMAP_RTC_HOURS_REG 0x08
|
|
#define OMAP_RTC_DAYS_REG 0x0C
|
|
#define OMAP_RTC_MONTHS_REG 0x10
|
|
#define OMAP_RTC_YEARS_REG 0x14
|
|
#define OMAP_RTC_WEEKS_REG 0x18
|
|
|
|
#define OMAP_RTC_ALARM_SECONDS_REG 0x20
|
|
#define OMAP_RTC_ALARM_MINUTES_REG 0x24
|
|
#define OMAP_RTC_ALARM_HOURS_REG 0x28
|
|
#define OMAP_RTC_ALARM_DAYS_REG 0x2c
|
|
#define OMAP_RTC_ALARM_MONTHS_REG 0x30
|
|
#define OMAP_RTC_ALARM_YEARS_REG 0x34
|
|
|
|
#define OMAP_RTC_CTRL_REG 0x40
|
|
#define OMAP_RTC_STATUS_REG 0x44
|
|
#define OMAP_RTC_INTERRUPTS_REG 0x48
|
|
|
|
#define OMAP_RTC_COMP_LSB_REG 0x4c
|
|
#define OMAP_RTC_COMP_MSB_REG 0x50
|
|
#define OMAP_RTC_OSC_REG 0x54
|
|
|
|
#define OMAP_RTC_KICK0_REG 0x6c
|
|
#define OMAP_RTC_KICK1_REG 0x70
|
|
|
|
#define OMAP_RTC_IRQWAKEEN 0x7c
|
|
|
|
#define OMAP_RTC_ALARM2_SECONDS_REG 0x80
|
|
#define OMAP_RTC_ALARM2_MINUTES_REG 0x84
|
|
#define OMAP_RTC_ALARM2_HOURS_REG 0x88
|
|
#define OMAP_RTC_ALARM2_DAYS_REG 0x8c
|
|
#define OMAP_RTC_ALARM2_MONTHS_REG 0x90
|
|
#define OMAP_RTC_ALARM2_YEARS_REG 0x94
|
|
|
|
#define OMAP_RTC_PMIC_REG 0x98
|
|
|
|
/* OMAP_RTC_CTRL_REG bit fields: */
|
|
#define OMAP_RTC_CTRL_SPLIT BIT(7)
|
|
#define OMAP_RTC_CTRL_DISABLE BIT(6)
|
|
#define OMAP_RTC_CTRL_SET_32_COUNTER BIT(5)
|
|
#define OMAP_RTC_CTRL_TEST BIT(4)
|
|
#define OMAP_RTC_CTRL_MODE_12_24 BIT(3)
|
|
#define OMAP_RTC_CTRL_AUTO_COMP BIT(2)
|
|
#define OMAP_RTC_CTRL_ROUND_30S BIT(1)
|
|
#define OMAP_RTC_CTRL_STOP BIT(0)
|
|
|
|
/* OMAP_RTC_STATUS_REG bit fields: */
|
|
#define OMAP_RTC_STATUS_POWER_UP BIT(7)
|
|
#define OMAP_RTC_STATUS_ALARM2 BIT(7)
|
|
#define OMAP_RTC_STATUS_ALARM BIT(6)
|
|
#define OMAP_RTC_STATUS_1D_EVENT BIT(5)
|
|
#define OMAP_RTC_STATUS_1H_EVENT BIT(4)
|
|
#define OMAP_RTC_STATUS_1M_EVENT BIT(3)
|
|
#define OMAP_RTC_STATUS_1S_EVENT BIT(2)
|
|
#define OMAP_RTC_STATUS_RUN BIT(1)
|
|
#define OMAP_RTC_STATUS_BUSY BIT(0)
|
|
|
|
/* OMAP_RTC_INTERRUPTS_REG bit fields: */
|
|
#define OMAP_RTC_INTERRUPTS_IT_ALARM2 BIT(4)
|
|
#define OMAP_RTC_INTERRUPTS_IT_ALARM BIT(3)
|
|
#define OMAP_RTC_INTERRUPTS_IT_TIMER BIT(2)
|
|
|
|
/* OMAP_RTC_OSC_REG bit fields: */
|
|
#define OMAP_RTC_OSC_32KCLK_EN BIT(6)
|
|
|
|
/* OMAP_RTC_IRQWAKEEN bit fields: */
|
|
#define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1)
|
|
|
|
/* OMAP_RTC_PMIC bit fields: */
|
|
#define OMAP_RTC_PMIC_POWER_EN_EN BIT(16)
|
|
|
|
/* OMAP_RTC_KICKER values */
|
|
#define KICK0_VALUE 0x83e70b13
|
|
#define KICK1_VALUE 0x95a4f1e0
|
|
|
|
struct omap_rtc_device_type {
|
|
bool has_32kclk_en;
|
|
bool has_kicker;
|
|
bool has_irqwakeen;
|
|
bool has_pmic_mode;
|
|
bool has_power_up_reset;
|
|
};
|
|
|
|
struct omap_rtc {
|
|
struct rtc_device *rtc;
|
|
void __iomem *base;
|
|
int irq_alarm;
|
|
int irq_timer;
|
|
u8 interrupts_reg;
|
|
bool is_pmic_controller;
|
|
const struct omap_rtc_device_type *type;
|
|
};
|
|
|
|
static inline u8 rtc_read(struct omap_rtc *rtc, unsigned int reg)
|
|
{
|
|
return readb(rtc->base + reg);
|
|
}
|
|
|
|
static inline u32 rtc_readl(struct omap_rtc *rtc, unsigned int reg)
|
|
{
|
|
return readl(rtc->base + reg);
|
|
}
|
|
|
|
static inline void rtc_write(struct omap_rtc *rtc, unsigned int reg, u8 val)
|
|
{
|
|
writeb(val, rtc->base + reg);
|
|
}
|
|
|
|
static inline void rtc_writel(struct omap_rtc *rtc, unsigned int reg, u32 val)
|
|
{
|
|
writel(val, rtc->base + reg);
|
|
}
|
|
|
|
/*
|
|
* We rely on the rtc framework to handle locking (rtc->ops_lock),
|
|
* so the only other requirement is that register accesses which
|
|
* require BUSY to be clear are made with IRQs locally disabled
|
|
*/
|
|
static void rtc_wait_not_busy(struct omap_rtc *rtc)
|
|
{
|
|
int count;
|
|
u8 status;
|
|
|
|
/* BUSY may stay active for 1/32768 second (~30 usec) */
|
|
for (count = 0; count < 50; count++) {
|
|
status = rtc_read(rtc, OMAP_RTC_STATUS_REG);
|
|
if (!(status & OMAP_RTC_STATUS_BUSY))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
/* now we have ~15 usec to read/write various registers */
|
|
}
|
|
|
|
static irqreturn_t rtc_irq(int irq, void *dev_id)
|
|
{
|
|
struct omap_rtc *rtc = dev_id;
|
|
unsigned long events = 0;
|
|
u8 irq_data;
|
|
|
|
irq_data = rtc_read(rtc, OMAP_RTC_STATUS_REG);
|
|
|
|
/* alarm irq? */
|
|
if (irq_data & OMAP_RTC_STATUS_ALARM) {
|
|
rtc_write(rtc, OMAP_RTC_STATUS_REG, OMAP_RTC_STATUS_ALARM);
|
|
events |= RTC_IRQF | RTC_AF;
|
|
}
|
|
|
|
/* 1/sec periodic/update irq? */
|
|
if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
|
|
events |= RTC_IRQF | RTC_UF;
|
|
|
|
rtc_update_irq(rtc->rtc, 1, events);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct omap_rtc *rtc = dev_get_drvdata(dev);
|
|
u8 reg, irqwake_reg = 0;
|
|
|
|
local_irq_disable();
|
|
rtc_wait_not_busy(rtc);
|
|
reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
|
|
if (rtc->type->has_irqwakeen)
|
|
irqwake_reg = rtc_read(rtc, OMAP_RTC_IRQWAKEEN);
|
|
|
|
if (enabled) {
|
|
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
|
|
} else {
|
|
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
|
|
}
|
|
rtc_wait_not_busy(rtc);
|
|
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, reg);
|
|
if (rtc->type->has_irqwakeen)
|
|
rtc_write(rtc, OMAP_RTC_IRQWAKEEN, irqwake_reg);
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* this hardware doesn't support "don't care" alarm fields */
|
|
static int tm2bcd(struct rtc_time *tm)
|
|
{
|
|
if (rtc_valid_tm(tm) != 0)
|
|
return -EINVAL;
|
|
|
|
tm->tm_sec = bin2bcd(tm->tm_sec);
|
|
tm->tm_min = bin2bcd(tm->tm_min);
|
|
tm->tm_hour = bin2bcd(tm->tm_hour);
|
|
tm->tm_mday = bin2bcd(tm->tm_mday);
|
|
|
|
tm->tm_mon = bin2bcd(tm->tm_mon + 1);
|
|
|
|
/* epoch == 1900 */
|
|
if (tm->tm_year < 100 || tm->tm_year > 199)
|
|
return -EINVAL;
|
|
tm->tm_year = bin2bcd(tm->tm_year - 100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcd2tm(struct rtc_time *tm)
|
|
{
|
|
tm->tm_sec = bcd2bin(tm->tm_sec);
|
|
tm->tm_min = bcd2bin(tm->tm_min);
|
|
tm->tm_hour = bcd2bin(tm->tm_hour);
|
|
tm->tm_mday = bcd2bin(tm->tm_mday);
|
|
tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
|
|
/* epoch == 1900 */
|
|
tm->tm_year = bcd2bin(tm->tm_year) + 100;
|
|
}
|
|
|
|
static void omap_rtc_read_time_raw(struct omap_rtc *rtc, struct rtc_time *tm)
|
|
{
|
|
tm->tm_sec = rtc_read(rtc, OMAP_RTC_SECONDS_REG);
|
|
tm->tm_min = rtc_read(rtc, OMAP_RTC_MINUTES_REG);
|
|
tm->tm_hour = rtc_read(rtc, OMAP_RTC_HOURS_REG);
|
|
tm->tm_mday = rtc_read(rtc, OMAP_RTC_DAYS_REG);
|
|
tm->tm_mon = rtc_read(rtc, OMAP_RTC_MONTHS_REG);
|
|
tm->tm_year = rtc_read(rtc, OMAP_RTC_YEARS_REG);
|
|
}
|
|
|
|
static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct omap_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
/* we don't report wday/yday/isdst ... */
|
|
local_irq_disable();
|
|
rtc_wait_not_busy(rtc);
|
|
omap_rtc_read_time_raw(rtc, tm);
|
|
local_irq_enable();
|
|
|
|
bcd2tm(tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct omap_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
if (tm2bcd(tm) < 0)
|
|
return -EINVAL;
|
|
|
|
local_irq_disable();
|
|
rtc_wait_not_busy(rtc);
|
|
|
|
rtc_write(rtc, OMAP_RTC_YEARS_REG, tm->tm_year);
|
|
rtc_write(rtc, OMAP_RTC_MONTHS_REG, tm->tm_mon);
|
|
rtc_write(rtc, OMAP_RTC_DAYS_REG, tm->tm_mday);
|
|
rtc_write(rtc, OMAP_RTC_HOURS_REG, tm->tm_hour);
|
|
rtc_write(rtc, OMAP_RTC_MINUTES_REG, tm->tm_min);
|
|
rtc_write(rtc, OMAP_RTC_SECONDS_REG, tm->tm_sec);
|
|
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
|
|
{
|
|
struct omap_rtc *rtc = dev_get_drvdata(dev);
|
|
u8 interrupts;
|
|
|
|
local_irq_disable();
|
|
rtc_wait_not_busy(rtc);
|
|
|
|
alm->time.tm_sec = rtc_read(rtc, OMAP_RTC_ALARM_SECONDS_REG);
|
|
alm->time.tm_min = rtc_read(rtc, OMAP_RTC_ALARM_MINUTES_REG);
|
|
alm->time.tm_hour = rtc_read(rtc, OMAP_RTC_ALARM_HOURS_REG);
|
|
alm->time.tm_mday = rtc_read(rtc, OMAP_RTC_ALARM_DAYS_REG);
|
|
alm->time.tm_mon = rtc_read(rtc, OMAP_RTC_ALARM_MONTHS_REG);
|
|
alm->time.tm_year = rtc_read(rtc, OMAP_RTC_ALARM_YEARS_REG);
|
|
|
|
local_irq_enable();
|
|
|
|
bcd2tm(&alm->time);
|
|
|
|
interrupts = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
|
|
alm->enabled = !!(interrupts & OMAP_RTC_INTERRUPTS_IT_ALARM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
|
|
{
|
|
struct omap_rtc *rtc = dev_get_drvdata(dev);
|
|
u8 reg, irqwake_reg = 0;
|
|
|
|
if (tm2bcd(&alm->time) < 0)
|
|
return -EINVAL;
|
|
|
|
local_irq_disable();
|
|
rtc_wait_not_busy(rtc);
|
|
|
|
rtc_write(rtc, OMAP_RTC_ALARM_YEARS_REG, alm->time.tm_year);
|
|
rtc_write(rtc, OMAP_RTC_ALARM_MONTHS_REG, alm->time.tm_mon);
|
|
rtc_write(rtc, OMAP_RTC_ALARM_DAYS_REG, alm->time.tm_mday);
|
|
rtc_write(rtc, OMAP_RTC_ALARM_HOURS_REG, alm->time.tm_hour);
|
|
rtc_write(rtc, OMAP_RTC_ALARM_MINUTES_REG, alm->time.tm_min);
|
|
rtc_write(rtc, OMAP_RTC_ALARM_SECONDS_REG, alm->time.tm_sec);
|
|
|
|
reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
|
|
if (rtc->type->has_irqwakeen)
|
|
irqwake_reg = rtc_read(rtc, OMAP_RTC_IRQWAKEEN);
|
|
|
|
if (alm->enabled) {
|
|
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
|
|
} else {
|
|
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
|
|
}
|
|
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, reg);
|
|
if (rtc->type->has_irqwakeen)
|
|
rtc_write(rtc, OMAP_RTC_IRQWAKEEN, irqwake_reg);
|
|
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct omap_rtc *omap_rtc_power_off_rtc;
|
|
|
|
/*
|
|
* omap_rtc_poweroff: RTC-controlled power off
|
|
*
|
|
* The RTC can be used to control an external PMIC via the pmic_power_en pin,
|
|
* which can be configured to transition to OFF on ALARM2 events.
|
|
*
|
|
* Notes:
|
|
* The two-second alarm offset is the shortest offset possible as the alarm
|
|
* registers must be set before the next timer update and the offset
|
|
* calculation is too heavy for everything to be done within a single access
|
|
* period (~15 us).
|
|
*
|
|
* Called with local interrupts disabled.
|
|
*/
|
|
static void omap_rtc_power_off(void)
|
|
{
|
|
struct omap_rtc *rtc = omap_rtc_power_off_rtc;
|
|
struct rtc_time tm;
|
|
unsigned long now;
|
|
u32 val;
|
|
|
|
/* enable pmic_power_en control */
|
|
val = rtc_readl(rtc, OMAP_RTC_PMIC_REG);
|
|
rtc_writel(rtc, OMAP_RTC_PMIC_REG, val | OMAP_RTC_PMIC_POWER_EN_EN);
|
|
|
|
/* set alarm two seconds from now */
|
|
omap_rtc_read_time_raw(rtc, &tm);
|
|
bcd2tm(&tm);
|
|
rtc_tm_to_time(&tm, &now);
|
|
rtc_time_to_tm(now + 2, &tm);
|
|
|
|
if (tm2bcd(&tm) < 0) {
|
|
dev_err(&rtc->rtc->dev, "power off failed\n");
|
|
return;
|
|
}
|
|
|
|
rtc_wait_not_busy(rtc);
|
|
|
|
rtc_write(rtc, OMAP_RTC_ALARM2_SECONDS_REG, tm.tm_sec);
|
|
rtc_write(rtc, OMAP_RTC_ALARM2_MINUTES_REG, tm.tm_min);
|
|
rtc_write(rtc, OMAP_RTC_ALARM2_HOURS_REG, tm.tm_hour);
|
|
rtc_write(rtc, OMAP_RTC_ALARM2_DAYS_REG, tm.tm_mday);
|
|
rtc_write(rtc, OMAP_RTC_ALARM2_MONTHS_REG, tm.tm_mon);
|
|
rtc_write(rtc, OMAP_RTC_ALARM2_YEARS_REG, tm.tm_year);
|
|
|
|
/*
|
|
* enable ALARM2 interrupt
|
|
*
|
|
* NOTE: this fails on AM3352 if rtc_write (writeb) is used
|
|
*/
|
|
val = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
|
|
rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG,
|
|
val | OMAP_RTC_INTERRUPTS_IT_ALARM2);
|
|
|
|
/*
|
|
* Wait for alarm to trigger (within two seconds) and external PMIC to
|
|
* power off the system. Add a 500 ms margin for external latencies
|
|
* (e.g. debounce circuits).
|
|
*/
|
|
mdelay(2500);
|
|
}
|
|
|
|
static struct rtc_class_ops omap_rtc_ops = {
|
|
.read_time = omap_rtc_read_time,
|
|
.set_time = omap_rtc_set_time,
|
|
.read_alarm = omap_rtc_read_alarm,
|
|
.set_alarm = omap_rtc_set_alarm,
|
|
.alarm_irq_enable = omap_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static const struct omap_rtc_device_type omap_rtc_default_type = {
|
|
.has_power_up_reset = true,
|
|
};
|
|
|
|
static const struct omap_rtc_device_type omap_rtc_am3352_type = {
|
|
.has_32kclk_en = true,
|
|
.has_kicker = true,
|
|
.has_irqwakeen = true,
|
|
.has_pmic_mode = true,
|
|
};
|
|
|
|
static const struct omap_rtc_device_type omap_rtc_da830_type = {
|
|
.has_kicker = true,
|
|
};
|
|
|
|
static const struct platform_device_id omap_rtc_id_table[] = {
|
|
{
|
|
.name = "omap_rtc",
|
|
.driver_data = (kernel_ulong_t)&omap_rtc_default_type,
|
|
}, {
|
|
.name = "am3352-rtc",
|
|
.driver_data = (kernel_ulong_t)&omap_rtc_am3352_type,
|
|
}, {
|
|
.name = "da830-rtc",
|
|
.driver_data = (kernel_ulong_t)&omap_rtc_da830_type,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, omap_rtc_id_table);
|
|
|
|
static const struct of_device_id omap_rtc_of_match[] = {
|
|
{
|
|
.compatible = "ti,am3352-rtc",
|
|
.data = &omap_rtc_am3352_type,
|
|
}, {
|
|
.compatible = "ti,da830-rtc",
|
|
.data = &omap_rtc_da830_type,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_rtc_of_match);
|
|
|
|
static int __init omap_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_rtc *rtc;
|
|
struct resource *res;
|
|
u8 reg, mask, new_ctrl;
|
|
const struct platform_device_id *id_entry;
|
|
const struct of_device_id *of_id;
|
|
int ret;
|
|
|
|
rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
|
|
if (!rtc)
|
|
return -ENOMEM;
|
|
|
|
of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
|
|
if (of_id) {
|
|
rtc->type = of_id->data;
|
|
rtc->is_pmic_controller = rtc->type->has_pmic_mode &&
|
|
of_property_read_bool(pdev->dev.of_node,
|
|
"system-power-controller");
|
|
} else {
|
|
id_entry = platform_get_device_id(pdev);
|
|
rtc->type = (void *)id_entry->driver_data;
|
|
}
|
|
|
|
rtc->irq_timer = platform_get_irq(pdev, 0);
|
|
if (rtc->irq_timer <= 0)
|
|
return -ENOENT;
|
|
|
|
rtc->irq_alarm = platform_get_irq(pdev, 1);
|
|
if (rtc->irq_alarm <= 0)
|
|
return -ENOENT;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
rtc->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(rtc->base))
|
|
return PTR_ERR(rtc->base);
|
|
|
|
platform_set_drvdata(pdev, rtc);
|
|
|
|
/* Enable the clock/module so that we can access the registers */
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
|
|
if (rtc->type->has_kicker) {
|
|
rtc_writel(rtc, OMAP_RTC_KICK0_REG, KICK0_VALUE);
|
|
rtc_writel(rtc, OMAP_RTC_KICK1_REG, KICK1_VALUE);
|
|
}
|
|
|
|
/*
|
|
* disable interrupts
|
|
*
|
|
* NOTE: ALARM2 is not cleared on AM3352 if rtc_write (writeb) is used
|
|
*/
|
|
rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
|
|
|
|
/* enable RTC functional clock */
|
|
if (rtc->type->has_32kclk_en) {
|
|
reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
|
|
rtc_writel(rtc, OMAP_RTC_OSC_REG,
|
|
reg | OMAP_RTC_OSC_32KCLK_EN);
|
|
}
|
|
|
|
/* clear old status */
|
|
reg = rtc_read(rtc, OMAP_RTC_STATUS_REG);
|
|
|
|
mask = OMAP_RTC_STATUS_ALARM;
|
|
|
|
if (rtc->type->has_pmic_mode)
|
|
mask |= OMAP_RTC_STATUS_ALARM2;
|
|
|
|
if (rtc->type->has_power_up_reset) {
|
|
mask |= OMAP_RTC_STATUS_POWER_UP;
|
|
if (reg & OMAP_RTC_STATUS_POWER_UP)
|
|
dev_info(&pdev->dev, "RTC power up reset detected\n");
|
|
}
|
|
|
|
if (reg & mask)
|
|
rtc_write(rtc, OMAP_RTC_STATUS_REG, reg & mask);
|
|
|
|
/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
|
|
reg = rtc_read(rtc, OMAP_RTC_CTRL_REG);
|
|
if (reg & OMAP_RTC_CTRL_STOP)
|
|
dev_info(&pdev->dev, "already running\n");
|
|
|
|
/* force to 24 hour mode */
|
|
new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT | OMAP_RTC_CTRL_AUTO_COMP);
|
|
new_ctrl |= OMAP_RTC_CTRL_STOP;
|
|
|
|
/*
|
|
* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
|
|
*
|
|
* - Device wake-up capability setting should come through chip
|
|
* init logic. OMAP1 boards should initialize the "wakeup capable"
|
|
* flag in the platform device if the board is wired right for
|
|
* being woken up by RTC alarm. For OMAP-L138, this capability
|
|
* is built into the SoC by the "Deep Sleep" capability.
|
|
*
|
|
* - Boards wired so RTC_ON_nOFF is used as the reset signal,
|
|
* rather than nPWRON_RESET, should forcibly enable split
|
|
* power mode. (Some chip errata report that RTC_CTRL_SPLIT
|
|
* is write-only, and always reads as zero...)
|
|
*/
|
|
|
|
if (new_ctrl & OMAP_RTC_CTRL_SPLIT)
|
|
dev_info(&pdev->dev, "split power mode\n");
|
|
|
|
if (reg != new_ctrl)
|
|
rtc_write(rtc, OMAP_RTC_CTRL_REG, new_ctrl);
|
|
|
|
device_init_wakeup(&pdev->dev, true);
|
|
|
|
rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
|
|
&omap_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtc->rtc)) {
|
|
ret = PTR_ERR(rtc->rtc);
|
|
goto err;
|
|
}
|
|
|
|
/* handle periodic and alarm irqs */
|
|
ret = devm_request_irq(&pdev->dev, rtc->irq_timer, rtc_irq, 0,
|
|
dev_name(&rtc->rtc->dev), rtc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (rtc->irq_timer != rtc->irq_alarm) {
|
|
ret = devm_request_irq(&pdev->dev, rtc->irq_alarm, rtc_irq, 0,
|
|
dev_name(&rtc->rtc->dev), rtc);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
if (rtc->is_pmic_controller) {
|
|
if (!pm_power_off) {
|
|
omap_rtc_power_off_rtc = rtc;
|
|
pm_power_off = omap_rtc_power_off;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
device_init_wakeup(&pdev->dev, false);
|
|
if (rtc->type->has_kicker)
|
|
rtc_writel(rtc, OMAP_RTC_KICK0_REG, 0);
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __exit omap_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap_rtc *rtc = platform_get_drvdata(pdev);
|
|
|
|
if (pm_power_off == omap_rtc_power_off &&
|
|
omap_rtc_power_off_rtc == rtc) {
|
|
pm_power_off = NULL;
|
|
omap_rtc_power_off_rtc = NULL;
|
|
}
|
|
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
|
|
/* leave rtc running, but disable irqs */
|
|
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
|
|
|
|
if (rtc->type->has_kicker)
|
|
rtc_writel(rtc, OMAP_RTC_KICK0_REG, 0);
|
|
|
|
/* Disable the clock/module */
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int omap_rtc_suspend(struct device *dev)
|
|
{
|
|
struct omap_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
rtc->interrupts_reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
/*
|
|
* FIXME: the RTC alarm is not currently acting as a wakeup event
|
|
* source on some platforms, and in fact this enable() call is just
|
|
* saving a flag that's never used...
|
|
*/
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(rtc->irq_alarm);
|
|
else
|
|
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
|
|
|
|
/* Disable the clock/module */
|
|
pm_runtime_put_sync(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_resume(struct device *dev)
|
|
{
|
|
struct omap_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
/* Enable the clock/module so that we can access the registers */
|
|
pm_runtime_get_sync(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(rtc->irq_alarm);
|
|
else
|
|
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, rtc->interrupts_reg);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(omap_rtc_pm_ops, omap_rtc_suspend, omap_rtc_resume);
|
|
|
|
static void omap_rtc_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct omap_rtc *rtc = platform_get_drvdata(pdev);
|
|
u8 mask;
|
|
|
|
/*
|
|
* Keep the ALARM interrupt enabled to allow the system to power up on
|
|
* alarm events.
|
|
*/
|
|
mask = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
|
|
mask &= OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, mask);
|
|
}
|
|
|
|
static struct platform_driver omap_rtc_driver = {
|
|
.remove = __exit_p(omap_rtc_remove),
|
|
.shutdown = omap_rtc_shutdown,
|
|
.driver = {
|
|
.name = "omap_rtc",
|
|
.owner = THIS_MODULE,
|
|
.pm = &omap_rtc_pm_ops,
|
|
.of_match_table = omap_rtc_of_match,
|
|
},
|
|
.id_table = omap_rtc_id_table,
|
|
};
|
|
|
|
module_platform_driver_probe(omap_rtc_driver, omap_rtc_probe);
|
|
|
|
MODULE_ALIAS("platform:omap_rtc");
|
|
MODULE_AUTHOR("George G. Davis (and others)");
|
|
MODULE_LICENSE("GPL");
|