| .. |
|
au0828
|
V4L/DVB (11343): au0828: make i2c clock speed per-board configurable
|
2009-04-06 21:43:56 -03:00 |
|
bt8xx
|
V4L/DVB (11281): bttv: move saa6588 config to the helper chip config
|
2009-03-30 12:43:46 -03:00 |
|
cpia2
|
V4L/DVB (10907): avoid loading the entire videodev.h header on V4L2 drivers
|
2009-03-30 12:43:15 -03:00 |
|
cx18
|
V4L/DVB (11310): cx18: remove intermediate 'ioctl' step
|
2009-03-30 12:43:49 -03:00 |
|
cx88
|
V4L/DVB (11305): cx88: prevent probing rtc and ir devices
|
2009-03-30 12:43:49 -03:00 |
|
cx231xx
|
V4L/DVB (10957): cx231xx: Fix CodingStyle
|
2009-04-06 21:44:03 -03:00 |
|
cx23885
|
V4L/DVB (11297): cx23885: convert to v4l2_subdev.
|
2009-03-30 12:43:48 -03:00 |
|
cx25840
|
V4L/DVB (10953): cx25840: Fix CodingStyle errors introduced by the last patch
|
2009-04-06 21:44:00 -03:00 |
|
em28xx
|
V4L/DVB (11331): em28xx: convert to v4l2_subdev
|
2009-04-06 21:43:50 -03:00 |
|
et61x251
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
gspca
|
V4L/DVB (11263): gspca: Stop setting buffer type, and avoid memset in querycap
|
2009-03-30 12:43:44 -03:00 |
|
hdpvr
|
V4L/DVB (11247): hdpvr: empty internal device buffer after stopping streaming
|
2009-03-30 12:43:43 -03:00 |
|
ivtv
|
V4L/DVB (11091): cx18, ivtv: Ensure endianess for linemasks in VBI embedded in MPEG stream
|
2009-03-30 12:43:28 -03:00 |
|
ovcamchip
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
pvrusb2
|
V4L/DVB (11334): pvrusb2: Fix uninitialized tuner_setup field(s)
|
2009-04-06 21:43:52 -03:00 |
|
pwc
|
V4L/DVB (10945): pwc : fix LED and power setup for first open
|
2009-03-30 12:43:18 -03:00 |
|
saa7134
|
V4L/DVB (11282): saa7134: add RDS support.
|
2009-03-30 12:43:47 -03:00 |
|
sn9c102
|
V4L/DVB (11221): gspca - sonixj: Prefer sonixj instead of sn9c102 for 0471:0327.
|
2009-03-30 12:43:41 -03:00 |
|
usbvideo
|
V4L/DVB (11226): avoid warnings for request_ihex_firmware on dabusb and vicam
|
2009-03-30 12:43:41 -03:00 |
|
usbvision
|
V4L/DVB (11271): usbvision: Remove buffer type checks from enum_fmt_vid_cap, XXXbuf
|
2009-03-30 12:43:46 -03:00 |
|
uvc
|
V4L/DVB (11293): uvcvideo: Add zero fill for VIDIOC_ENUM_FMT
|
2009-03-30 12:43:48 -03:00 |
|
zc0301
|
V4L/DVB (10343): gspca - zc3xx / zc0301: Handle the 0ac8:303b instead of zc0301.
|
2009-03-30 12:42:30 -03:00 |
|
zoran
|
V4L/DVB (11237): media/zoran: fix printk format
|
2009-03-30 12:43:42 -03:00 |
|
Kconfig
|
V4L/DVB (11350): Add camera (CSI) driver for MX1
|
2009-04-06 21:43:58 -03:00 |
|
Makefile
|
V4L/DVB (10954): Add cx231xx USB driver
|
2009-04-06 21:44:01 -03:00 |
|
adv7170.c
|
V4L/DVB (10914): v4l2: fix compile warnings when printing u64 value.
|
2009-03-30 12:43:15 -03:00 |
|
adv7175.c
|
V4L/DVB (10914): v4l2: fix compile warnings when printing u64 value.
|
2009-03-30 12:43:15 -03:00 |
|
arv.c
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
bt819.c
|
V4L/DVB (11052): bt819: remove an unused header
|
2009-03-30 12:43:23 -03:00 |
|
bt856.c
|
V4L/DVB (10914): v4l2: fix compile warnings when printing u64 value.
|
2009-03-30 12:43:15 -03:00 |
|
bt866.c
|
V4L/DVB (10914): v4l2: fix compile warnings when printing u64 value.
|
2009-03-30 12:43:15 -03:00 |
|
btcx-risc.c
|
…
|
|
|
btcx-risc.h
|
…
|
|
|
bw-qcam.c
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
bw-qcam.h
|
…
|
|
|
c-qcam.c
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
cafe_ccic-regs.h
|
…
|
|
|
cafe_ccic.c
|
V4L/DVB (11267): cafe_ccic: Remove buffer type check from XXXbuf
|
2009-03-30 12:43:45 -03:00 |
|
cpia.c
|
proc 2/2: remove struct proc_dir_entry::owner
|
2009-03-31 01:14:44 +04:00 |
|
cpia.h
|
…
|
|
|
cpia_pp.c
|
…
|
|
|
cpia_usb.c
|
…
|
|
|
cs53l32a.c
|
V4L/DVB (11254): cs53l32a: remove legacy support.
|
2009-03-30 12:43:44 -03:00 |
|
cs5345.c
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
cs8420.h
|
…
|
|
|
cx2341x.c
|
V4L/DVB (10698): v4l2-common: remove v4l2_ctrl_query_fill_std
|
2009-03-30 12:42:54 -03:00 |
|
dabusb.c
|
V4L/DVB (11256): dabusb: fix compile warning.
|
2009-03-30 12:43:44 -03:00 |
|
dabusb.h
|
…
|
|
|
font.h
|
…
|
|
|
hexium_gemini.c
|
V4L/DVB (10271): saa7146: convert to video_ioctl2.
|
2009-03-30 12:42:24 -03:00 |
|
hexium_orion.c
|
V4L/DVB (10271): saa7146: convert to video_ioctl2.
|
2009-03-30 12:42:24 -03:00 |
|
ibmmpeg2.h
|
…
|
|
|
indycam.c
|
V4L/DVB (10866): saa7191, indycam: remove compat code.
|
2009-03-30 12:43:11 -03:00 |
|
indycam.h
|
V4L/DVB (10861): vino/indycam/saa7191: convert to i2c modules to V4L2.
|
2009-03-30 12:43:10 -03:00 |
|
ir-kbd-i2c.c
|
V4L/DVB (10939): ir-kbd-i2c: Prevent general protection fault on rmmod
|
2009-03-30 12:43:17 -03:00 |
|
ks0127.c
|
V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c drivers
|
2009-03-30 12:43:49 -03:00 |
|
ks0127.h
|
V4L/DVB (10730): v4l-dvb: cleanup obsolete references to v4l1 headers.
|
2009-03-30 12:42:59 -03:00 |
|
m52790.c
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
meye.c
|
V4L/DVB (11270): meye: Remove buffer type checks from XXX_fmt_vid_cap, XXXbuf
|
2009-03-30 12:43:45 -03:00 |
|
meye.h
|
…
|
|
|
msp3400-driver.c
|
V4L/DVB (11308): msp3400: use the V4L2 header since no V4L1 code is there
|
2009-03-30 12:43:49 -03:00 |
|
msp3400-driver.h
|
V4L/DVB (9825): msp3400: convert to v4l2_subdev.
|
2008-12-30 09:38:39 -02:00 |
|
msp3400-kthreads.c
|
V4L/DVB (9825): msp3400: convert to v4l2_subdev.
|
2008-12-30 09:38:39 -02:00 |
|
mt9m001.c
|
V4L/DVB (11326): mt9m001: fix advertised pixel clock polarity
|
2009-04-06 21:43:48 -03:00 |
|
mt9m111.c
|
V4L/DVB (11024): soc-camera: separate S_FMT and S_CROP operations
|
2009-03-30 12:43:21 -03:00 |
|
mt9t031.c
|
V4L/DVB (11347): mt9t031: use platform power hook
|
2009-04-06 21:43:57 -03:00 |
|
mt9v022.c
|
V4L/DVB (11033): mt9v022: allow setting of bus width from board code
|
2009-03-30 12:43:22 -03:00 |
|
mx1_camera.c
|
V4L/DVB (11350): Add camera (CSI) driver for MX1
|
2009-04-06 21:43:58 -03:00 |
|
mx3_camera.c
|
V4L/DVB (11349): mx3-camera: adapt the clock definition and the driver to the new clock naming
|
2009-04-06 21:43:58 -03:00 |
|
mxb.c
|
V4L/DVB (10870a): remove all references for video_decoder.h
|
2009-03-30 12:43:15 -03:00 |
|
mxb.h
|
…
|
|
|
omap24xxcam-dma.c
|
V4L/DVB (9815): omap2: add OMAP2 camera driver.
|
2008-12-30 09:38:35 -02:00 |
|
omap24xxcam.c
|
V4L/DVB (11264): omap24xxcam: Remove buffer type check from vidioc_s/g_parm
|
2009-03-30 12:43:45 -03:00 |
|
omap24xxcam.h
|
V4L/DVB (9815): omap2: add OMAP2 camera driver.
|
2008-12-30 09:38:35 -02:00 |
|
ov511.c
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
ov511.h
|
V4L/DVB (9116): USB: remove info() macro from usb media drivers
|
2008-10-12 09:37:14 -02:00 |
|
ov772x.c
|
V4L/DVB (11327): ov772x: add edge contrl support
|
2009-04-06 21:43:49 -03:00 |
|
ov7670.c
|
V4L/DVB (11117): ov7670: add support to get/set registers
|
2009-03-30 12:43:30 -03:00 |
|
pms.c
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
pxa_camera.c
|
V4L/DVB (11323): pxa-camera: simplify the .buf_queue path by merging two loops
|
2009-04-06 21:43:46 -03:00 |
|
s2255drv.c
|
V4L/DVB (10309): s2255drv: use usb_make_path to report bus info
|
2009-03-30 12:42:27 -03:00 |
|
saa711x_regs.h
|
…
|
|
|
saa717x.c
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
saa5246a.c
|
V4L/DVB (10499): saa7146: convert saa7146 and mxb in particular to v4l2_subdev.
|
2009-03-30 12:42:42 -03:00 |
|
saa5249.c
|
V4L/DVB (10499): saa7146: convert saa7146 and mxb in particular to v4l2_subdev.
|
2009-03-30 12:42:42 -03:00 |
|
saa6588.c
|
V4L/DVB (11283): saa6588: remove legacy code.
|
2009-03-30 12:43:47 -03:00 |
|
saa7110.c
|
V4L/DVB (10914): v4l2: fix compile warnings when printing u64 value.
|
2009-03-30 12:43:15 -03:00 |
|
saa7115.c
|
V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c drivers
|
2009-03-30 12:43:49 -03:00 |
|
saa7121.h
|
…
|
|
|
saa7127.c
|
V4L/DVB (10731): zoran i2c modules: remove i2c autoprobing support.
|
2009-03-30 12:42:59 -03:00 |
|
saa7146.h
|
V4L/DVB (10907): avoid loading the entire videodev.h header on V4L2 drivers
|
2009-03-30 12:43:15 -03:00 |
|
saa7146reg.h
|
…
|
|
|
saa7185.c
|
V4L/DVB (10731): zoran i2c modules: remove i2c autoprobing support.
|
2009-03-30 12:42:59 -03:00 |
|
saa7191.c
|
V4L/DVB (11316): saa7191: tuner ops wasn't set.
|
2009-03-30 12:43:50 -03:00 |
|
saa7191.h
|
V4L/DVB (10861): vino/indycam/saa7191: convert to i2c modules to V4L2.
|
2009-03-30 12:43:10 -03:00 |
|
se401.c
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
se401.h
|
…
|
|
|
sh_mobile_ceu_camera.c
|
V4L/DVB (11029): video: use videobuf_waiton() in sh_mobile_ceu free_buffer()
|
2009-03-30 12:43:21 -03:00 |
|
soc_camera.c
|
V4L/DVB (11325): soc-camera: fix breakage caused by 1fa5ae857b
|
2009-04-06 21:43:48 -03:00 |
|
soc_camera_platform.c
|
V4L/DVB (11024): soc-camera: separate S_FMT and S_CROP operations
|
2009-03-30 12:43:21 -03:00 |
|
stk-sensor.c
|
…
|
|
|
stk-webcam.c
|
V4L/DVB (11265): stkwebcam: Remove buffer type check from g_parm and q/dq/reqbufs
|
2009-03-30 12:43:45 -03:00 |
|
stk-webcam.h
|
V4L/DVB (9193): stk-webcam: minor cleanup
|
2008-10-17 17:14:57 -03:00 |
|
stradis.c
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
stv680.c
|
V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
|
2009-01-02 17:11:34 -02:00 |
|
stv680.h
|
…
|
|
|
tcm825x.c
|
V4L/DVB (10628): V4L: Storage class should be before const qualifier
|
2009-03-30 12:42:48 -03:00 |
|
tcm825x.h
|
V4L/DVB (10628): V4L: Storage class should be before const qualifier
|
2009-03-30 12:42:48 -03:00 |
|
tda7432.c
|
V4L/DVB (11303): tda7432: remove legacy code for old-style i2c API
|
2009-03-30 12:43:49 -03:00 |
|
tda9840.c
|
V4L/DVB (10499): saa7146: convert saa7146 and mxb in particular to v4l2_subdev.
|
2009-03-30 12:42:42 -03:00 |
|
tda9875.c
|
V4L/DVB (11302): tda9875: remove legacy code for old-style i2c API
|
2009-03-30 12:43:48 -03:00 |
|
tea6415c.c
|
V4L/DVB (10499): saa7146: convert saa7146 and mxb in particular to v4l2_subdev.
|
2009-03-30 12:42:42 -03:00 |
|
tea6415c.h
|
V4L/DVB (10499): saa7146: convert saa7146 and mxb in particular to v4l2_subdev.
|
2009-03-30 12:42:42 -03:00 |
|
tea6420.c
|
V4L/DVB (10499): saa7146: convert saa7146 and mxb in particular to v4l2_subdev.
|
2009-03-30 12:42:42 -03:00 |
|
tea6420.h
|
V4L/DVB (10499): saa7146: convert saa7146 and mxb in particular to v4l2_subdev.
|
2009-03-30 12:42:42 -03:00 |
|
tlv320aic23b.c
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
tuner-core.c
|
V4L/DVB (11312): tuner: remove V4L1 code from this driver.
|
2009-03-30 12:43:49 -03:00 |
|
tvaudio.c
|
V4L/DVB (11277): tvaudio: always call init_timer to prevent rmmod crash.
|
2009-03-30 12:43:46 -03:00 |
|
tveeprom.c
|
V4L/DVB (11071): tveeprom: add the xc5000 tuner to the tveeprom definition
|
2009-03-30 12:43:26 -03:00 |
|
tvp514x.c
|
V4L/DVB (10698): v4l2-common: remove v4l2_ctrl_query_fill_std
|
2009-03-30 12:42:54 -03:00 |
|
tvp514x_regs.h
|
V4L/DVB (9817): v4l: add new tvp514x I2C video decoder driver
|
2008-12-30 09:38:36 -02:00 |
|
tvp5150.c
|
V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c drivers
|
2009-03-30 12:43:49 -03:00 |
|
tvp5150_reg.h
|
…
|
|
|
tw9910.c
|
V4L/DVB (11024): soc-camera: separate S_FMT and S_CROP operations
|
2009-03-30 12:43:21 -03:00 |
|
upd64031a.c
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
upd64083.c
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
v4l1-compat.c
|
V4L/DVB (11329): Fix buglets in v4l1 compatibility layer
|
2009-04-06 21:43:50 -03:00 |
|
v4l2-common.c
|
V4L/DVB (11098): v4l2-common: remove incorrect MODULE test
|
2009-03-30 12:43:28 -03:00 |
|
v4l2-compat-ioctl32.c
|
V4L/DVB (10910): videodev2.h: remove deprecated VIDIOC_G_CHIP_IDENT_OLD
|
2009-03-30 12:43:15 -03:00 |
|
v4l2-dev.c
|
V4L/DVB (11242): allow v4l2 drivers to provide a get_unmapped_area handler
|
2009-03-30 12:43:43 -03:00 |
|
v4l2-device.c
|
V4L/DVB (11044): v4l2-device: add v4l2_device_disconnect
|
2009-03-30 12:43:22 -03:00 |
|
v4l2-int-device.c
|
V4L/DVB (9322): v4l2-int-if: Export more interfaces to modules
|
2008-10-21 14:31:20 -02:00 |
|
v4l2-ioctl.c
|
V4L/DVB (11260): v4l2-ioctl: Check format for S_PARM and G_PARM
|
2009-03-30 12:43:44 -03:00 |
|
v4l2-subdev.c
|
V4L/DVB (11112): v4l2-subdev: add support for TRY_FMT, ENUM_FMT and G/S_PARM.
|
2009-03-30 12:43:30 -03:00 |
|
videobuf-core.c
|
…
|
|
|
videobuf-dma-contig.c
|
V4L/DVB (10304): buf-dma-contig: fix USERPTR free handling
|
2009-03-30 12:42:27 -03:00 |
|
videobuf-dma-sg.c
|
V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage
|
2009-01-07 22:18:54 -02:00 |
|
videobuf-dvb.c
|
V4L/DVB (9335): videobuf: split unregister bus creating self-contained frontend de-allocator
|
2008-10-21 14:32:08 -02:00 |
|
videobuf-vmalloc.c
|
V4L/DVB (10305): videobuf-vmalloc: Fix: videobuf memory were never freed
|
2009-03-30 12:42:27 -03:00 |
|
vino.c
|
V4L/DVB (11266): vino: Remove code for things already done by video_ioctl2
|
2009-03-30 12:43:45 -03:00 |
|
vino.h
|
…
|
|
|
vivi.c
|
V4L/DVB (10912): vivi: fix compile warning.
|
2009-03-30 12:43:15 -03:00 |
|
vp27smpx.c
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
vpx3220.c
|
V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c drivers
|
2009-03-30 12:43:49 -03:00 |
|
w9966.c
|
V4L/DVB (10907): avoid loading the entire videodev.h header on V4L2 drivers
|
2009-03-30 12:43:15 -03:00 |
|
w9968cf.c
|
V4L/DVB (11045): v4l2: call v4l2_device_disconnect in USB drivers.
|
2009-03-30 12:43:23 -03:00 |
|
w9968cf.h
|
V4L/DVB (10874): w9968cf/ovcamchip: convert to v4l2_subdev.
|
2009-03-30 12:43:11 -03:00 |
|
w9968cf_decoder.h
|
…
|
|
|
w9968cf_vpp.h
|
…
|
|
|
wm8739.c
|
V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
|
2009-03-30 12:43:49 -03:00 |
|
wm8775.c
|
V4L/DVB (11301): wm8775: remove legacy code for old-style i2c API
|
2009-03-30 12:43:48 -03:00 |
|
zr364xx.c
|
V4L/DVB (11272): zr364xx: Remove code for things already done by video_ioctl2
|
2009-03-30 12:43:46 -03:00 |
b925517645