366 lines
9.4 KiB
C
366 lines
9.4 KiB
C
/*
|
|
* Copyright (C) STMicroelectronics SA 2015
|
|
* Authors: Arnaud Pouliquen <arnaud.pouliquen@st.com>
|
|
* for STMicroelectronics.
|
|
* License terms: GNU General Public License (GPL), version 2
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <sound/soc.h>
|
|
|
|
#include "uniperif.h"
|
|
|
|
/*
|
|
* Note: snd_pcm_hardware is linked to DMA controller but is declared here to
|
|
* integrate unireader capability in term of rate and supported channels
|
|
*/
|
|
static const struct snd_pcm_hardware uni_reader_pcm_hw = {
|
|
.info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
|
|
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP |
|
|
SNDRV_PCM_INFO_MMAP_VALID,
|
|
.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE,
|
|
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.rate_min = 8000,
|
|
.rate_max = 96000,
|
|
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
|
|
.periods_min = 2,
|
|
.periods_max = 48,
|
|
|
|
.period_bytes_min = 128,
|
|
.period_bytes_max = 64 * PAGE_SIZE,
|
|
.buffer_bytes_max = 256 * PAGE_SIZE
|
|
};
|
|
|
|
/*
|
|
* uni_reader_irq_handler
|
|
* In case of error audio stream is stopped; stop action is protected via PCM
|
|
* stream lock to avoid race condition with trigger callback.
|
|
*/
|
|
static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id)
|
|
{
|
|
irqreturn_t ret = IRQ_NONE;
|
|
struct uniperif *reader = dev_id;
|
|
unsigned int status;
|
|
|
|
if (reader->state == UNIPERIF_STATE_STOPPED) {
|
|
/* Unexpected IRQ: do nothing */
|
|
dev_warn(reader->dev, "unexpected IRQ ");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Get interrupt status & clear them immediately */
|
|
status = GET_UNIPERIF_ITS(reader);
|
|
SET_UNIPERIF_ITS_BCLR(reader, status);
|
|
|
|
/* Check for fifo overflow error */
|
|
if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) {
|
|
dev_err(reader->dev, "FIFO error detected");
|
|
|
|
snd_pcm_stream_lock(reader->substream);
|
|
snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN);
|
|
snd_pcm_stream_unlock(reader->substream);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uni_reader_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
|
|
struct uniperif *reader = priv->dai_data.uni;
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
int transfer_size, trigger_limit;
|
|
int slot_width;
|
|
int count = 10;
|
|
|
|
/* The reader should be stopped */
|
|
if (reader->state != UNIPERIF_STATE_STOPPED) {
|
|
dev_err(reader->dev, "%s: invalid reader state %d", __func__,
|
|
reader->state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Calculate transfer size (in fifo cells and bytes) for frame count */
|
|
transfer_size = runtime->channels * UNIPERIF_FIFO_FRAMES;
|
|
|
|
/* Calculate number of empty cells available before asserting DREQ */
|
|
if (reader->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0)
|
|
trigger_limit = UNIPERIF_FIFO_SIZE - transfer_size;
|
|
else
|
|
/*
|
|
* Since SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0
|
|
* FDMA_TRIGGER_LIMIT also controls when the state switches
|
|
* from OFF or STANDBY to AUDIO DATA.
|
|
*/
|
|
trigger_limit = transfer_size;
|
|
|
|
/* Trigger limit must be an even number */
|
|
if ((!trigger_limit % 2) ||
|
|
(trigger_limit != 1 && transfer_size % 2) ||
|
|
(trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(reader))) {
|
|
dev_err(reader->dev, "invalid trigger limit %d", trigger_limit);
|
|
return -EINVAL;
|
|
}
|
|
|
|
SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(reader, trigger_limit);
|
|
|
|
switch (reader->daifmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
SET_UNIPERIF_I2S_FMT_LR_POL_HIG(reader);
|
|
break;
|
|
default:
|
|
SET_UNIPERIF_I2S_FMT_LR_POL_LOW(reader);
|
|
}
|
|
|
|
/* Force slot width to 32 in I2S mode */
|
|
if ((reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK)
|
|
== SND_SOC_DAIFMT_I2S) {
|
|
slot_width = 32;
|
|
} else {
|
|
switch (runtime->format) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
slot_width = 16;
|
|
break;
|
|
default:
|
|
slot_width = 32;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Number of bits per subframe (i.e one channel sample) on input. */
|
|
switch (slot_width) {
|
|
case 32:
|
|
SET_UNIPERIF_I2S_FMT_NBIT_32(reader);
|
|
SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(reader);
|
|
break;
|
|
case 16:
|
|
SET_UNIPERIF_I2S_FMT_NBIT_16(reader);
|
|
SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(reader);
|
|
break;
|
|
default:
|
|
dev_err(reader->dev, "subframe format not supported");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Configure data memory format */
|
|
switch (runtime->format) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
/* One data word contains two samples */
|
|
SET_UNIPERIF_CONFIG_MEM_FMT_16_16(reader);
|
|
break;
|
|
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
/*
|
|
* Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits
|
|
* on the MSB then zeros (if less than 32 bytes)"...
|
|
*/
|
|
SET_UNIPERIF_CONFIG_MEM_FMT_16_0(reader);
|
|
break;
|
|
|
|
default:
|
|
dev_err(reader->dev, "format not supported");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
|
|
SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(reader);
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
|
|
SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(reader);
|
|
SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
|
|
break;
|
|
default:
|
|
dev_err(reader->dev, "format not supported");
|
|
return -EINVAL;
|
|
}
|
|
|
|
SET_UNIPERIF_I2S_FMT_ORDER_MSB(reader);
|
|
|
|
/* Data clocking (changing) on the rising edge */
|
|
SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(reader);
|
|
|
|
/* Number of channels must be even */
|
|
|
|
if ((runtime->channels % 2) || (runtime->channels < 2) ||
|
|
(runtime->channels > 10)) {
|
|
dev_err(reader->dev, "%s: invalid nb of channels", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
SET_UNIPERIF_I2S_FMT_NUM_CH(reader, runtime->channels / 2);
|
|
|
|
/* Clear any pending interrupts */
|
|
SET_UNIPERIF_ITS_BCLR(reader, GET_UNIPERIF_ITS(reader));
|
|
|
|
SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(reader, 0);
|
|
|
|
/* Set the interrupt mask */
|
|
SET_UNIPERIF_ITM_BSET_DMA_ERROR(reader);
|
|
SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);
|
|
SET_UNIPERIF_ITM_BSET_MEM_BLK_READ(reader);
|
|
|
|
/* Enable underflow recovery interrupts */
|
|
if (reader->info->underflow_enabled) {
|
|
SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(reader);
|
|
SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(reader);
|
|
}
|
|
|
|
/* Reset uniperipheral reader */
|
|
SET_UNIPERIF_SOFT_RST_SOFT_RST(reader);
|
|
|
|
while (GET_UNIPERIF_SOFT_RST_SOFT_RST(reader)) {
|
|
udelay(5);
|
|
count--;
|
|
}
|
|
if (!count) {
|
|
dev_err(reader->dev, "Failed to reset uniperif");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uni_reader_start(struct uniperif *reader)
|
|
{
|
|
/* The reader should be stopped */
|
|
if (reader->state != UNIPERIF_STATE_STOPPED) {
|
|
dev_err(reader->dev, "%s: invalid reader state", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Enable reader interrupts (and clear possible stalled ones) */
|
|
SET_UNIPERIF_ITS_BCLR_FIFO_ERROR(reader);
|
|
SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);
|
|
|
|
/* Launch the reader */
|
|
SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(reader);
|
|
|
|
/* Update state to started */
|
|
reader->state = UNIPERIF_STATE_STARTED;
|
|
return 0;
|
|
}
|
|
|
|
static int uni_reader_stop(struct uniperif *reader)
|
|
{
|
|
/* The reader should not be in stopped state */
|
|
if (reader->state == UNIPERIF_STATE_STOPPED) {
|
|
dev_err(reader->dev, "%s: invalid reader state", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Turn the reader off */
|
|
SET_UNIPERIF_CTRL_OPERATION_OFF(reader);
|
|
|
|
/* Disable interrupts */
|
|
SET_UNIPERIF_ITM_BCLR(reader, GET_UNIPERIF_ITM(reader));
|
|
|
|
/* Update state to stopped and return */
|
|
reader->state = UNIPERIF_STATE_STOPPED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uni_reader_trigger(struct snd_pcm_substream *substream,
|
|
int cmd, struct snd_soc_dai *dai)
|
|
{
|
|
struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
|
|
struct uniperif *reader = priv->dai_data.uni;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
return uni_reader_start(reader);
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
return uni_reader_stop(reader);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void uni_reader_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
|
|
struct uniperif *reader = priv->dai_data.uni;
|
|
|
|
if (reader->state != UNIPERIF_STATE_STOPPED) {
|
|
/* Stop the reader */
|
|
uni_reader_stop(reader);
|
|
}
|
|
}
|
|
|
|
static int uni_reader_parse_dt(struct platform_device *pdev,
|
|
struct uniperif *reader)
|
|
{
|
|
struct uniperif_info *info;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
|
|
/* Allocate memory for the info structure */
|
|
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
if (of_property_read_u32(node, "st,version", &reader->ver) ||
|
|
reader->ver == SND_ST_UNIPERIF_VERSION_UNKNOWN) {
|
|
dev_err(&pdev->dev, "Unknown uniperipheral version ");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Save the info structure */
|
|
reader->info = info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops uni_reader_dai_ops = {
|
|
.shutdown = uni_reader_shutdown,
|
|
.prepare = uni_reader_prepare,
|
|
.trigger = uni_reader_trigger,
|
|
.hw_params = sti_uniperiph_dai_hw_params,
|
|
.set_fmt = sti_uniperiph_dai_set_fmt,
|
|
};
|
|
|
|
int uni_reader_init(struct platform_device *pdev,
|
|
struct uniperif *reader)
|
|
{
|
|
int ret = 0;
|
|
|
|
reader->dev = &pdev->dev;
|
|
reader->state = UNIPERIF_STATE_STOPPED;
|
|
reader->hw = &uni_reader_pcm_hw;
|
|
reader->dai_ops = &uni_reader_dai_ops;
|
|
|
|
ret = uni_reader_parse_dt(pdev, reader);
|
|
if (ret < 0) {
|
|
dev_err(reader->dev, "Failed to parse DeviceTree");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, reader->irq,
|
|
uni_reader_irq_handler, IRQF_SHARED,
|
|
dev_name(&pdev->dev), reader);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to request IRQ");
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(uni_reader_init);
|