733 lines
17 KiB
C
733 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* RTC driver for the Micro Crystal RV3028
|
|
*
|
|
* Copyright (C) 2019 Micro Crystal SA
|
|
*
|
|
* Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/bcd.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/rtc.h>
|
|
|
|
#define RV3028_SEC 0x00
|
|
#define RV3028_MIN 0x01
|
|
#define RV3028_HOUR 0x02
|
|
#define RV3028_WDAY 0x03
|
|
#define RV3028_DAY 0x04
|
|
#define RV3028_MONTH 0x05
|
|
#define RV3028_YEAR 0x06
|
|
#define RV3028_ALARM_MIN 0x07
|
|
#define RV3028_ALARM_HOUR 0x08
|
|
#define RV3028_ALARM_DAY 0x09
|
|
#define RV3028_STATUS 0x0E
|
|
#define RV3028_CTRL1 0x0F
|
|
#define RV3028_CTRL2 0x10
|
|
#define RV3028_EVT_CTRL 0x13
|
|
#define RV3028_TS_COUNT 0x14
|
|
#define RV3028_TS_SEC 0x15
|
|
#define RV3028_RAM1 0x1F
|
|
#define RV3028_EEPROM_ADDR 0x25
|
|
#define RV3028_EEPROM_DATA 0x26
|
|
#define RV3028_EEPROM_CMD 0x27
|
|
#define RV3028_CLKOUT 0x35
|
|
#define RV3028_OFFSET 0x36
|
|
#define RV3028_BACKUP 0x37
|
|
|
|
#define RV3028_STATUS_PORF BIT(0)
|
|
#define RV3028_STATUS_EVF BIT(1)
|
|
#define RV3028_STATUS_AF BIT(2)
|
|
#define RV3028_STATUS_TF BIT(3)
|
|
#define RV3028_STATUS_UF BIT(4)
|
|
#define RV3028_STATUS_BSF BIT(5)
|
|
#define RV3028_STATUS_CLKF BIT(6)
|
|
#define RV3028_STATUS_EEBUSY BIT(7)
|
|
|
|
#define RV3028_CTRL1_EERD BIT(3)
|
|
#define RV3028_CTRL1_WADA BIT(5)
|
|
|
|
#define RV3028_CTRL2_RESET BIT(0)
|
|
#define RV3028_CTRL2_12_24 BIT(1)
|
|
#define RV3028_CTRL2_EIE BIT(2)
|
|
#define RV3028_CTRL2_AIE BIT(3)
|
|
#define RV3028_CTRL2_TIE BIT(4)
|
|
#define RV3028_CTRL2_UIE BIT(5)
|
|
#define RV3028_CTRL2_TSE BIT(7)
|
|
|
|
#define RV3028_EVT_CTRL_TSR BIT(2)
|
|
|
|
#define RV3028_EEPROM_CMD_WRITE 0x21
|
|
#define RV3028_EEPROM_CMD_READ 0x22
|
|
|
|
#define RV3028_EEBUSY_POLL 10000
|
|
#define RV3028_EEBUSY_TIMEOUT 100000
|
|
|
|
#define RV3028_BACKUP_TCE BIT(5)
|
|
#define RV3028_BACKUP_TCR_MASK GENMASK(1,0)
|
|
|
|
#define OFFSET_STEP_PPT 953674
|
|
|
|
enum rv3028_type {
|
|
rv_3028,
|
|
};
|
|
|
|
struct rv3028_data {
|
|
struct regmap *regmap;
|
|
struct rtc_device *rtc;
|
|
enum rv3028_type type;
|
|
};
|
|
|
|
static u16 rv3028_trickle_resistors[] = {1000, 3000, 6000, 11000};
|
|
|
|
static ssize_t timestamp0_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
|
|
|
|
regmap_update_bits(rv3028->regmap, RV3028_EVT_CTRL, RV3028_EVT_CTRL_TSR,
|
|
RV3028_EVT_CTRL_TSR);
|
|
|
|
return count;
|
|
};
|
|
|
|
static ssize_t timestamp0_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
|
|
struct rtc_time tm;
|
|
int ret, count;
|
|
u8 date[6];
|
|
|
|
ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!count)
|
|
return 0;
|
|
|
|
ret = regmap_bulk_read(rv3028->regmap, RV3028_TS_SEC, date,
|
|
sizeof(date));
|
|
if (ret)
|
|
return ret;
|
|
|
|
tm.tm_sec = bcd2bin(date[0]);
|
|
tm.tm_min = bcd2bin(date[1]);
|
|
tm.tm_hour = bcd2bin(date[2]);
|
|
tm.tm_mday = bcd2bin(date[3]);
|
|
tm.tm_mon = bcd2bin(date[4]) - 1;
|
|
tm.tm_year = bcd2bin(date[5]) + 100;
|
|
|
|
ret = rtc_valid_tm(&tm);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%llu\n",
|
|
(unsigned long long)rtc_tm_to_time64(&tm));
|
|
};
|
|
|
|
static DEVICE_ATTR_RW(timestamp0);
|
|
|
|
static ssize_t timestamp0_count_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
|
|
int ret, count;
|
|
|
|
ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%u\n", count);
|
|
};
|
|
|
|
static DEVICE_ATTR_RO(timestamp0_count);
|
|
|
|
static struct attribute *rv3028_attrs[] = {
|
|
&dev_attr_timestamp0.attr,
|
|
&dev_attr_timestamp0_count.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group rv3028_attr_group = {
|
|
.attrs = rv3028_attrs,
|
|
};
|
|
|
|
static irqreturn_t rv3028_handle_irq(int irq, void *dev_id)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_id;
|
|
unsigned long events = 0;
|
|
u32 status = 0, ctrl = 0;
|
|
|
|
if (regmap_read(rv3028->regmap, RV3028_STATUS, &status) < 0 ||
|
|
status == 0) {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (status & RV3028_STATUS_PORF)
|
|
dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n");
|
|
|
|
if (status & RV3028_STATUS_TF) {
|
|
status |= RV3028_STATUS_TF;
|
|
ctrl |= RV3028_CTRL2_TIE;
|
|
events |= RTC_PF;
|
|
}
|
|
|
|
if (status & RV3028_STATUS_AF) {
|
|
status |= RV3028_STATUS_AF;
|
|
ctrl |= RV3028_CTRL2_AIE;
|
|
events |= RTC_AF;
|
|
}
|
|
|
|
if (status & RV3028_STATUS_UF) {
|
|
status |= RV3028_STATUS_UF;
|
|
ctrl |= RV3028_CTRL2_UIE;
|
|
events |= RTC_UF;
|
|
}
|
|
|
|
if (events) {
|
|
rtc_update_irq(rv3028->rtc, 1, events);
|
|
regmap_update_bits(rv3028->regmap, RV3028_STATUS, status, 0);
|
|
regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ctrl, 0);
|
|
}
|
|
|
|
if (status & RV3028_STATUS_EVF) {
|
|
sysfs_notify(&rv3028->rtc->dev.kobj, NULL,
|
|
dev_attr_timestamp0.attr.name);
|
|
dev_warn(&rv3028->rtc->dev, "event detected");
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int rv3028_get_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
|
|
u8 date[7];
|
|
int ret, status;
|
|
|
|
ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (status & RV3028_STATUS_PORF) {
|
|
dev_warn(dev, "Voltage low, data is invalid.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_bulk_read(rv3028->regmap, RV3028_SEC, date, sizeof(date));
|
|
if (ret)
|
|
return ret;
|
|
|
|
tm->tm_sec = bcd2bin(date[RV3028_SEC] & 0x7f);
|
|
tm->tm_min = bcd2bin(date[RV3028_MIN] & 0x7f);
|
|
tm->tm_hour = bcd2bin(date[RV3028_HOUR] & 0x3f);
|
|
tm->tm_wday = ilog2(date[RV3028_WDAY] & 0x7f);
|
|
tm->tm_mday = bcd2bin(date[RV3028_DAY] & 0x3f);
|
|
tm->tm_mon = bcd2bin(date[RV3028_MONTH] & 0x1f) - 1;
|
|
tm->tm_year = bcd2bin(date[RV3028_YEAR]) + 100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv3028_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
|
|
u8 date[7];
|
|
int ret;
|
|
|
|
date[RV3028_SEC] = bin2bcd(tm->tm_sec);
|
|
date[RV3028_MIN] = bin2bcd(tm->tm_min);
|
|
date[RV3028_HOUR] = bin2bcd(tm->tm_hour);
|
|
date[RV3028_WDAY] = 1 << (tm->tm_wday);
|
|
date[RV3028_DAY] = bin2bcd(tm->tm_mday);
|
|
date[RV3028_MONTH] = bin2bcd(tm->tm_mon + 1);
|
|
date[RV3028_YEAR] = bin2bcd(tm->tm_year - 100);
|
|
|
|
/*
|
|
* Writing to the Seconds register has the same effect as setting RESET
|
|
* bit to 1
|
|
*/
|
|
ret = regmap_bulk_write(rv3028->regmap, RV3028_SEC, date,
|
|
sizeof(date));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
|
|
RV3028_STATUS_PORF, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rv3028_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
|
|
u8 alarmvals[3];
|
|
int status, ctrl, ret;
|
|
|
|
ret = regmap_bulk_read(rv3028->regmap, RV3028_ALARM_MIN, alarmvals,
|
|
sizeof(alarmvals));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_read(rv3028->regmap, RV3028_CTRL2, &ctrl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
alrm->time.tm_sec = 0;
|
|
alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
|
|
alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
|
|
alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
|
|
|
|
alrm->enabled = !!(ctrl & RV3028_CTRL2_AIE);
|
|
alrm->pending = (status & RV3028_STATUS_AF) && alrm->enabled;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv3028_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
|
|
u8 alarmvals[3];
|
|
u8 ctrl = 0;
|
|
int ret;
|
|
|
|
/* The alarm has no seconds, round up to nearest minute */
|
|
if (alrm->time.tm_sec) {
|
|
time64_t alarm_time = rtc_tm_to_time64(&alrm->time);
|
|
|
|
alarm_time += 60 - alrm->time.tm_sec;
|
|
rtc_time64_to_tm(alarm_time, &alrm->time);
|
|
}
|
|
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
|
|
RV3028_CTRL2_AIE | RV3028_CTRL2_UIE, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
alarmvals[0] = bin2bcd(alrm->time.tm_min);
|
|
alarmvals[1] = bin2bcd(alrm->time.tm_hour);
|
|
alarmvals[2] = bin2bcd(alrm->time.tm_mday);
|
|
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
|
|
RV3028_STATUS_AF, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_bulk_write(rv3028->regmap, RV3028_ALARM_MIN, alarmvals,
|
|
sizeof(alarmvals));
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (alrm->enabled) {
|
|
if (rv3028->rtc->uie_rtctimer.enabled)
|
|
ctrl |= RV3028_CTRL2_UIE;
|
|
if (rv3028->rtc->aie_timer.enabled)
|
|
ctrl |= RV3028_CTRL2_AIE;
|
|
}
|
|
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
|
|
RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rv3028_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
|
|
int ctrl = 0, ret;
|
|
|
|
if (enabled) {
|
|
if (rv3028->rtc->uie_rtctimer.enabled)
|
|
ctrl |= RV3028_CTRL2_UIE;
|
|
if (rv3028->rtc->aie_timer.enabled)
|
|
ctrl |= RV3028_CTRL2_AIE;
|
|
}
|
|
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
|
|
RV3028_STATUS_AF | RV3028_STATUS_UF, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
|
|
RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv3028_read_offset(struct device *dev, long *offset)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
|
|
int ret, value, steps;
|
|
|
|
ret = regmap_read(rv3028->regmap, RV3028_OFFSET, &value);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
steps = sign_extend32(value << 1, 8);
|
|
|
|
ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
steps += value >> 7;
|
|
|
|
*offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv3028_set_offset(struct device *dev, long offset)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
offset = clamp(offset, -244141L, 243187L) * 1000;
|
|
offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
|
|
|
|
ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
|
|
offset << 7);
|
|
}
|
|
|
|
static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
|
|
int status, ret = 0;
|
|
|
|
switch (cmd) {
|
|
case RTC_VL_READ:
|
|
ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (status & RV3028_STATUS_PORF)
|
|
dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n");
|
|
|
|
status &= RV3028_STATUS_PORF;
|
|
|
|
if (copy_to_user((void __user *)arg, &status, sizeof(int)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
|
|
case RTC_VL_CLR:
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
|
|
RV3028_STATUS_PORF, 0);
|
|
|
|
return ret;
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static int rv3028_nvram_write(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
return regmap_bulk_write(priv, RV3028_RAM1 + offset, val, bytes);
|
|
}
|
|
|
|
static int rv3028_nvram_read(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
return regmap_bulk_read(priv, RV3028_RAM1 + offset, val, bytes);
|
|
}
|
|
|
|
static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
u32 status, ctrl1;
|
|
int i, ret, err;
|
|
u8 *buf = val;
|
|
|
|
ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(ctrl1 & RV3028_CTRL1_EERD)) {
|
|
ret = regmap_update_bits(priv, RV3028_CTRL1,
|
|
RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
|
|
!(status & RV3028_STATUS_EEBUSY),
|
|
RV3028_EEBUSY_POLL,
|
|
RV3028_EEBUSY_TIMEOUT);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
}
|
|
|
|
for (i = 0; i < bytes; i++) {
|
|
ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
|
|
ret = regmap_write(priv, RV3028_EEPROM_DATA, buf[i]);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
|
|
ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
|
|
ret = regmap_write(priv, RV3028_EEPROM_CMD,
|
|
RV3028_EEPROM_CMD_WRITE);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
|
|
usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
|
|
|
|
ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
|
|
!(status & RV3028_STATUS_EEBUSY),
|
|
RV3028_EEBUSY_POLL,
|
|
RV3028_EEBUSY_TIMEOUT);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
}
|
|
|
|
restore_eerd:
|
|
if (!(ctrl1 & RV3028_CTRL1_EERD))
|
|
{
|
|
err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
|
|
0);
|
|
if (err && !ret)
|
|
ret = err;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val,
|
|
size_t bytes)
|
|
{
|
|
u32 status, ctrl1, data;
|
|
int i, ret, err;
|
|
u8 *buf = val;
|
|
|
|
ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(ctrl1 & RV3028_CTRL1_EERD)) {
|
|
ret = regmap_update_bits(priv, RV3028_CTRL1,
|
|
RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
|
|
!(status & RV3028_STATUS_EEBUSY),
|
|
RV3028_EEBUSY_POLL,
|
|
RV3028_EEBUSY_TIMEOUT);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
}
|
|
|
|
for (i = 0; i < bytes; i++) {
|
|
ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
|
|
ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
|
|
ret = regmap_write(priv, RV3028_EEPROM_CMD,
|
|
RV3028_EEPROM_CMD_READ);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
|
|
ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
|
|
!(status & RV3028_STATUS_EEBUSY),
|
|
RV3028_EEBUSY_POLL,
|
|
RV3028_EEBUSY_TIMEOUT);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
|
|
ret = regmap_read(priv, RV3028_EEPROM_DATA, &data);
|
|
if (ret)
|
|
goto restore_eerd;
|
|
buf[i] = data;
|
|
}
|
|
|
|
restore_eerd:
|
|
if (!(ctrl1 & RV3028_CTRL1_EERD))
|
|
{
|
|
err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
|
|
0);
|
|
if (err && !ret)
|
|
ret = err;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct rtc_class_ops rv3028_rtc_ops = {
|
|
.read_time = rv3028_get_time,
|
|
.set_time = rv3028_set_time,
|
|
.read_offset = rv3028_read_offset,
|
|
.set_offset = rv3028_set_offset,
|
|
.ioctl = rv3028_ioctl,
|
|
};
|
|
|
|
static const struct regmap_config regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0x37,
|
|
};
|
|
|
|
static int rv3028_probe(struct i2c_client *client)
|
|
{
|
|
struct rv3028_data *rv3028;
|
|
int ret, status;
|
|
u32 ohms;
|
|
struct nvmem_config nvmem_cfg = {
|
|
.name = "rv3028_nvram",
|
|
.word_size = 1,
|
|
.stride = 1,
|
|
.size = 2,
|
|
.type = NVMEM_TYPE_BATTERY_BACKED,
|
|
.reg_read = rv3028_nvram_read,
|
|
.reg_write = rv3028_nvram_write,
|
|
};
|
|
struct nvmem_config eeprom_cfg = {
|
|
.name = "rv3028_eeprom",
|
|
.word_size = 1,
|
|
.stride = 1,
|
|
.size = 43,
|
|
.type = NVMEM_TYPE_EEPROM,
|
|
.reg_read = rv3028_eeprom_read,
|
|
.reg_write = rv3028_eeprom_write,
|
|
};
|
|
|
|
rv3028 = devm_kzalloc(&client->dev, sizeof(struct rv3028_data),
|
|
GFP_KERNEL);
|
|
if (!rv3028)
|
|
return -ENOMEM;
|
|
|
|
rv3028->regmap = devm_regmap_init_i2c(client, ®map_config);
|
|
|
|
i2c_set_clientdata(client, rv3028);
|
|
|
|
ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (status & RV3028_STATUS_PORF)
|
|
dev_warn(&client->dev, "Voltage low, data loss detected.\n");
|
|
|
|
if (status & RV3028_STATUS_AF)
|
|
dev_warn(&client->dev, "An alarm may have been missed.\n");
|
|
|
|
rv3028->rtc = devm_rtc_allocate_device(&client->dev);
|
|
if (IS_ERR(rv3028->rtc)) {
|
|
return PTR_ERR(rv3028->rtc);
|
|
}
|
|
|
|
if (client->irq > 0) {
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
NULL, rv3028_handle_irq,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
"rv3028", rv3028);
|
|
if (ret) {
|
|
dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
|
|
client->irq = 0;
|
|
} else {
|
|
rv3028_rtc_ops.read_alarm = rv3028_get_alarm;
|
|
rv3028_rtc_ops.set_alarm = rv3028_set_alarm;
|
|
rv3028_rtc_ops.alarm_irq_enable = rv3028_alarm_irq_enable;
|
|
}
|
|
}
|
|
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1,
|
|
RV3028_CTRL1_WADA, RV3028_CTRL1_WADA);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* setup timestamping */
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
|
|
RV3028_CTRL2_EIE | RV3028_CTRL2_TSE,
|
|
RV3028_CTRL2_EIE | RV3028_CTRL2_TSE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* setup trickle charger */
|
|
if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms",
|
|
&ohms)) {
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rv3028_trickle_resistors); i++)
|
|
if (ohms == rv3028_trickle_resistors[i])
|
|
break;
|
|
|
|
if (i < ARRAY_SIZE(rv3028_trickle_resistors)) {
|
|
ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
|
|
RV3028_BACKUP_TCE |
|
|
RV3028_BACKUP_TCR_MASK,
|
|
RV3028_BACKUP_TCE | i);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
dev_warn(&client->dev, "invalid trickle resistor value\n");
|
|
}
|
|
}
|
|
|
|
ret = rtc_add_group(rv3028->rtc, &rv3028_attr_group);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rv3028->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
|
|
rv3028->rtc->range_max = RTC_TIMESTAMP_END_2099;
|
|
rv3028->rtc->ops = &rv3028_rtc_ops;
|
|
ret = rtc_register_device(rv3028->rtc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
nvmem_cfg.priv = rv3028->regmap;
|
|
rtc_nvmem_register(rv3028->rtc, &nvmem_cfg);
|
|
eeprom_cfg.priv = rv3028->regmap;
|
|
rtc_nvmem_register(rv3028->rtc, &eeprom_cfg);
|
|
|
|
rv3028->rtc->max_user_freq = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id rv3028_of_match[] = {
|
|
{ .compatible = "microcrystal,rv3028", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rv3028_of_match);
|
|
|
|
static struct i2c_driver rv3028_driver = {
|
|
.driver = {
|
|
.name = "rtc-rv3028",
|
|
.of_match_table = of_match_ptr(rv3028_of_match),
|
|
},
|
|
.probe_new = rv3028_probe,
|
|
};
|
|
module_i2c_driver(rv3028_driver);
|
|
|
|
MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
|
|
MODULE_DESCRIPTION("Micro Crystal RV3028 RTC driver");
|
|
MODULE_LICENSE("GPL v2");
|