201 lines
4.8 KiB
C
201 lines
4.8 KiB
C
/*
|
|
* Copyright 2005-2008 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright 2008 Luotao Fu, kernel@pengutronix.de
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
|
|
#include "../w1.h"
|
|
#include "../w1_int.h"
|
|
#include "../w1_log.h"
|
|
|
|
/* According to the mx27 Datasheet the reset procedure should take up to about
|
|
* 1350us. We set the timeout to 500*100us = 50ms for sure */
|
|
#define MXC_W1_RESET_TIMEOUT 500
|
|
|
|
/*
|
|
* MXC W1 Register offsets
|
|
*/
|
|
#define MXC_W1_CONTROL 0x00
|
|
#define MXC_W1_TIME_DIVIDER 0x02
|
|
#define MXC_W1_RESET 0x04
|
|
#define MXC_W1_COMMAND 0x06
|
|
#define MXC_W1_TXRX 0x08
|
|
#define MXC_W1_INTERRUPT 0x0A
|
|
#define MXC_W1_INTERRUPT_EN 0x0C
|
|
|
|
struct mxc_w1_device {
|
|
void __iomem *regs;
|
|
unsigned int clkdiv;
|
|
struct clk *clk;
|
|
struct w1_bus_master bus_master;
|
|
};
|
|
|
|
/*
|
|
* this is the low level routine to
|
|
* reset the device on the One Wire interface
|
|
* on the hardware
|
|
*/
|
|
static u8 mxc_w1_ds2_reset_bus(void *data)
|
|
{
|
|
u8 reg_val;
|
|
unsigned int timeout_cnt = 0;
|
|
struct mxc_w1_device *dev = data;
|
|
|
|
__raw_writeb(0x80, (dev->regs + MXC_W1_CONTROL));
|
|
|
|
while (1) {
|
|
reg_val = __raw_readb(dev->regs + MXC_W1_CONTROL);
|
|
|
|
if (((reg_val >> 7) & 0x1) == 0 ||
|
|
timeout_cnt > MXC_W1_RESET_TIMEOUT)
|
|
break;
|
|
else
|
|
timeout_cnt++;
|
|
|
|
udelay(100);
|
|
}
|
|
return (reg_val >> 7) & 0x1;
|
|
}
|
|
|
|
/*
|
|
* this is the low level routine to read/write a bit on the One Wire
|
|
* interface on the hardware. It does write 0 if parameter bit is set
|
|
* to 0, otherwise a write 1/read.
|
|
*/
|
|
static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
|
|
{
|
|
struct mxc_w1_device *mdev = data;
|
|
void __iomem *ctrl_addr = mdev->regs + MXC_W1_CONTROL;
|
|
unsigned int timeout_cnt = 400; /* Takes max. 120us according to
|
|
* datasheet.
|
|
*/
|
|
|
|
__raw_writeb((1 << (5 - bit)), ctrl_addr);
|
|
|
|
while (timeout_cnt--) {
|
|
if (!((__raw_readb(ctrl_addr) >> (5 - bit)) & 0x1))
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
|
|
}
|
|
|
|
static int mxc_w1_probe(struct platform_device *pdev)
|
|
{
|
|
struct mxc_w1_device *mdev;
|
|
struct resource *res;
|
|
int err = 0;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
mdev = kzalloc(sizeof(struct mxc_w1_device), GFP_KERNEL);
|
|
if (!mdev)
|
|
return -ENOMEM;
|
|
|
|
mdev->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(mdev->clk)) {
|
|
err = PTR_ERR(mdev->clk);
|
|
goto failed_clk;
|
|
}
|
|
|
|
mdev->clkdiv = (clk_get_rate(mdev->clk) / 1000000) - 1;
|
|
|
|
res = request_mem_region(res->start, resource_size(res),
|
|
"mxc_w1");
|
|
if (!res) {
|
|
err = -EBUSY;
|
|
goto failed_req;
|
|
}
|
|
|
|
mdev->regs = ioremap(res->start, resource_size(res));
|
|
if (!mdev->regs) {
|
|
dev_err(&pdev->dev, "Cannot map mxc_w1 registers\n");
|
|
goto failed_ioremap;
|
|
}
|
|
|
|
clk_prepare_enable(mdev->clk);
|
|
__raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER);
|
|
|
|
mdev->bus_master.data = mdev;
|
|
mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
|
|
mdev->bus_master.touch_bit = mxc_w1_ds2_touch_bit;
|
|
|
|
err = w1_add_master_device(&mdev->bus_master);
|
|
|
|
if (err)
|
|
goto failed_add;
|
|
|
|
platform_set_drvdata(pdev, mdev);
|
|
return 0;
|
|
|
|
failed_add:
|
|
iounmap(mdev->regs);
|
|
failed_ioremap:
|
|
release_mem_region(res->start, resource_size(res));
|
|
failed_req:
|
|
clk_put(mdev->clk);
|
|
failed_clk:
|
|
kfree(mdev);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* disassociate the w1 device from the driver
|
|
*/
|
|
static int mxc_w1_remove(struct platform_device *pdev)
|
|
{
|
|
struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
w1_remove_master_device(&mdev->bus_master);
|
|
|
|
iounmap(mdev->regs);
|
|
release_mem_region(res->start, resource_size(res));
|
|
clk_disable_unprepare(mdev->clk);
|
|
clk_put(mdev->clk);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mxc_w1_driver = {
|
|
.driver = {
|
|
.name = "mxc_w1",
|
|
},
|
|
.probe = mxc_w1_probe,
|
|
.remove = mxc_w1_remove,
|
|
};
|
|
module_platform_driver(mxc_w1_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Freescale Semiconductors Inc");
|
|
MODULE_DESCRIPTION("Driver for One-Wire on MXC");
|