linux_old1/include/linux/uaccess.h

#ifndef __LINUX_UACCESS_H__
#define __LINUX_UACCESS_H__

#include <linux/sched.h>
#include <linux/thread_info.h>
#include <linux/kasan-checks.h>

#define VERIFY_READ 0
#define VERIFY_WRITE 1

#define uaccess_kernel() segment_eq(get_fs(), KERNEL_DS)

#include <asm/uaccess.h>

/*
 * Architectures should provide two primitives (raw_copy_{to,from}_user())
 * and get rid of their private instances of copy_{to,from}_user() and
 * __copy_{to,from}_user{,_inatomic}().
 *
 * raw_copy_{to,from}_user(to, from, size) should copy up to size bytes and
 * return the amount left to copy.  They should assume that access_ok() has
 * already been checked (and succeeded); they should *not* zero-pad anything.
 * No KASAN or object size checks either - those belong here.
 *
 * Both of these functions should attempt to copy size bytes starting at from
 * into the area starting at to.  They must not fetch or store anything
 * outside of those areas.  Return value must be between 0 (everything
 * copied successfully) and size (nothing copied).
 *
 * If raw_copy_{to,from}_user(to, from, size) returns N, size - N bytes starting
 * at to must become equal to the bytes fetched from the corresponding area
 * starting at from.  All data past to + size - N must be left unmodified.
 *
 * If copying succeeds, the return value must be 0.  If some data cannot be
 * fetched, it is permitted to copy less than had been fetched; the only
 * hard requirement is that not storing anything at all (i.e. returning size)
 * should happen only when nothing could be copied.  In other words, you don't
 * have to squeeze as much as possible - it is allowed, but not necessary.
 *
 * For raw_copy_from_user() to always points to kernel memory and no faults
 * on store should happen.  Interpretation of from is affected by set_fs().
 * For raw_copy_to_user() it's the other way round.
 *
 * Both can be inlined - it's up to architectures whether it wants to bother
 * with that.  They should not be used directly; they are used to implement
 * the 6 functions (copy_{to,from}_user(), __copy_{to,from}_user_inatomic())
 * that are used instead.  Out of those, __... ones are inlined.  Plain
 * copy_{to,from}_user() might or might not be inlined.  If you want them
 * inlined, have asm/uaccess.h define INLINE_COPY_{TO,FROM}_USER.
 *
 * NOTE: only copy_from_user() zero-pads the destination in case of short copy.
 * Neither __copy_from_user() nor __copy_from_user_inatomic() zero anything
 * at all; their callers absolutely must check the return value.
 *
 * Biarch ones should also provide raw_copy_in_user() - similar to the above,
 * but both source and destination are __user pointers (affected by set_fs()
 * as usual) and both source and destination can trigger faults.
 */

static __always_inline unsigned long
__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
{
	kasan_check_write(to, n);
	check_object_size(to, n, false);
	return raw_copy_from_user(to, from, n);
}

static __always_inline unsigned long
__copy_from_user(void *to, const void __user *from, unsigned long n)
{
	might_fault();
	kasan_check_write(to, n);
	check_object_size(to, n, false);
	return raw_copy_from_user(to, from, n);
}

/**
 * __copy_to_user_inatomic: - Copy a block of data into user space, with less checking.
 * @to:   Destination address, in user space.
 * @from: Source address, in kernel space.
 * @n:    Number of bytes to copy.
 *
 * Context: User context only.
 *
 * Copy data from kernel space to user space.  Caller must check
 * the specified block with access_ok() before calling this function.
 * The caller should also make sure he pins the user space address
 * so that we don't result in page fault and sleep.
 */
static __always_inline unsigned long
__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
{
	kasan_check_read(from, n);
	check_object_size(from, n, true);
	return raw_copy_to_user(to, from, n);
}

static __always_inline unsigned long
__copy_to_user(void __user *to, const void *from, unsigned long n)
{
	might_fault();
	kasan_check_read(from, n);
	check_object_size(from, n, true);
	return raw_copy_to_user(to, from, n);
}

#ifdef INLINE_COPY_FROM_USER
static inline unsigned long
_copy_from_user(void *to, const void __user *from, unsigned long n)
{
	unsigned long res = n;
	if (likely(access_ok(VERIFY_READ, from, n)))
		res = raw_copy_from_user(to, from, n);
	if (unlikely(res))
		memset(to + (n - res), 0, res);
	return res;
}
#else
extern unsigned long
_copy_from_user(void *, const void __user *, unsigned long);
#endif

#ifdef INLINE_COPY_TO_USER
static inline unsigned long
_copy_to_user(void __user *to, const void *from, unsigned long n)
{
	if (access_ok(VERIFY_WRITE, to, n))
		n = raw_copy_to_user(to, from, n);
	return n;
}
#else
extern unsigned long
_copy_to_user(void __user *, const void *, unsigned long);
#endif

extern void __compiletime_error("usercopy buffer size is too small")
__bad_copy_user(void);

static inline void copy_user_overflow(int size, unsigned long count)
{
	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
}

static __always_inline unsigned long __must_check
copy_from_user(void *to, const void __user *from, unsigned long n)
{
	int sz = __compiletime_object_size(to);

	might_fault();
	kasan_check_write(to, n);

	if (likely(sz < 0 || sz >= n)) {
		check_object_size(to, n, false);
		n = _copy_from_user(to, from, n);
	} else if (!__builtin_constant_p(n))
		copy_user_overflow(sz, n);
	else
		__bad_copy_user();

	return n;
}

static __always_inline unsigned long __must_check
copy_to_user(void __user *to, const void *from, unsigned long n)
{
	int sz = __compiletime_object_size(from);

	kasan_check_read(from, n);
	might_fault();

	if (likely(sz < 0 || sz >= n)) {
		check_object_size(from, n, true);
		n = _copy_to_user(to, from, n);
	} else if (!__builtin_constant_p(n))
		copy_user_overflow(sz, n);
	else
		__bad_copy_user();

	return n;
}
#ifdef CONFIG_COMPAT
static __always_inline unsigned long __must_check
__copy_in_user(void __user *to, const void *from, unsigned long n)
{
	might_fault();
	return raw_copy_in_user(to, from, n);
}
static __always_inline unsigned long __must_check
copy_in_user(void __user *to, const void *from, unsigned long n)
{
	might_fault();
	if (access_ok(VERIFY_WRITE, to, n) && access_ok(VERIFY_READ, from, n))
		n = raw_copy_in_user(to, from, n);
	return n;
}
#endif

static __always_inline void pagefault_disabled_inc(void)
{
	current->pagefault_disabled++;
}

static __always_inline void pagefault_disabled_dec(void)
{
	current->pagefault_disabled--;
}

/*
 * These routines enable/disable the pagefault handler. If disabled, it will
 * not take any locks and go straight to the fixup table.
 *
 * User access methods will not sleep when called from a pagefault_disabled()
 * environment.
 */
static inline void pagefault_disable(void)
{
	pagefault_disabled_inc();
	/*
	 * make sure to have issued the store before a pagefault
	 * can hit.
	 */
	barrier();
}

static inline void pagefault_enable(void)
{
	/*
	 * make sure to issue those last loads/stores before enabling
	 * the pagefault handler again.
	 */
	barrier();
	pagefault_disabled_dec();
}

/*
 * Is the pagefault handler disabled? If so, user access methods will not sleep.
 */
#define pagefault_disabled() (current->pagefault_disabled != 0)

/*
 * The pagefault handler is in general disabled by pagefault_disable() or
 * when in irq context (via in_atomic()).
 *
 * This function should only be used by the fault handlers. Other users should
 * stick to pagefault_disabled().
 * Please NEVER use preempt_disable() to disable the fault handler. With
 * !CONFIG_PREEMPT_COUNT, this is like a NOP. So the handler won't be disabled.
 * in_atomic() will report different values based on !CONFIG_PREEMPT_COUNT.
 */
#define faulthandler_disabled() (pagefault_disabled() || in_atomic())

#ifndef ARCH_HAS_NOCACHE_UACCESS

static inline unsigned long __copy_from_user_inatomic_nocache(void *to,
				const void __user *from, unsigned long n)
{
	return __copy_from_user_inatomic(to, from, n);
}

#endif		/* ARCH_HAS_NOCACHE_UACCESS */

/*
 * probe_kernel_read(): safely attempt to read from a location
 * @dst: pointer to the buffer that shall take the data
 * @src: address to read from
 * @size: size of the data chunk
 *
 * Safely read from address @src to the buffer at @dst.  If a kernel fault
 * happens, handle that and return -EFAULT.
 */
extern long probe_kernel_read(void *dst, const void *src, size_t size);
extern long __probe_kernel_read(void *dst, const void *src, size_t size);

/*
 * probe_kernel_write(): safely attempt to write to a location
 * @dst: address to write to
 * @src: pointer to the data that shall be written
 * @size: size of the data chunk
 *
 * Safely write to address @dst from the buffer at @src.  If a kernel fault
 * happens, handle that and return -EFAULT.
 */
extern long notrace probe_kernel_write(void *dst, const void *src, size_t size);
extern long notrace __probe_kernel_write(void *dst, const void *src, size_t size);

extern long strncpy_from_unsafe(char *dst, const void *unsafe_addr, long count);

/**
 * probe_kernel_address(): safely attempt to read from a location
 * @addr: address to read from
 * @retval: read into this variable
 *
 * Returns 0 on success, or -EFAULT.
 */
#define probe_kernel_address(addr, retval)		\
	probe_kernel_read(&retval, addr, sizeof(retval))

#ifndef user_access_begin
#define user_access_begin() do { } while (0)
#define user_access_end() do { } while (0)
#define unsafe_get_user(x, ptr, err) do { if (unlikely(__get_user(x, ptr))) goto err; } while (0)
#define unsafe_put_user(x, ptr, err) do { if (unlikely(__put_user(x, ptr))) goto err; } while (0)
#endif

#endif		/* __LINUX_UACCESS_H__ */