390 lines
9.2 KiB
C
390 lines
9.2 KiB
C
/*
|
|
* Driver for the on-board character LCD found on some ARM reference boards
|
|
* This is basically an Hitachi HD44780 LCD with a custom IP block to drive it
|
|
* http://en.wikipedia.org/wiki/HD44780_Character_LCD
|
|
* Currently it will just display the text "ARM Linux" and the linux version
|
|
*
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
* Author: Linus Walleij <triad@df.lth.se>
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
#include <generated/utsrelease.h>
|
|
|
|
#define DRIVERNAME "arm-charlcd"
|
|
#define CHARLCD_TIMEOUT (msecs_to_jiffies(1000))
|
|
|
|
/* Offsets to registers */
|
|
#define CHAR_COM 0x00U
|
|
#define CHAR_DAT 0x04U
|
|
#define CHAR_RD 0x08U
|
|
#define CHAR_RAW 0x0CU
|
|
#define CHAR_MASK 0x10U
|
|
#define CHAR_STAT 0x14U
|
|
|
|
#define CHAR_RAW_CLEAR 0x00000000U
|
|
#define CHAR_RAW_VALID 0x00000100U
|
|
|
|
/* Hitachi HD44780 display commands */
|
|
#define HD_CLEAR 0x01U
|
|
#define HD_HOME 0x02U
|
|
#define HD_ENTRYMODE 0x04U
|
|
#define HD_ENTRYMODE_INCREMENT 0x02U
|
|
#define HD_ENTRYMODE_SHIFT 0x01U
|
|
#define HD_DISPCTRL 0x08U
|
|
#define HD_DISPCTRL_ON 0x04U
|
|
#define HD_DISPCTRL_CURSOR_ON 0x02U
|
|
#define HD_DISPCTRL_CURSOR_BLINK 0x01U
|
|
#define HD_CRSR_SHIFT 0x10U
|
|
#define HD_CRSR_SHIFT_DISPLAY 0x08U
|
|
#define HD_CRSR_SHIFT_DISPLAY_RIGHT 0x04U
|
|
#define HD_FUNCSET 0x20U
|
|
#define HD_FUNCSET_8BIT 0x10U
|
|
#define HD_FUNCSET_2_LINES 0x08U
|
|
#define HD_FUNCSET_FONT_5X10 0x04U
|
|
#define HD_SET_CGRAM 0x40U
|
|
#define HD_SET_DDRAM 0x80U
|
|
#define HD_BUSY_FLAG 0x80U
|
|
|
|
/**
|
|
* @dev: a pointer back to containing device
|
|
* @phybase: the offset to the controller in physical memory
|
|
* @physize: the size of the physical page
|
|
* @virtbase: the offset to the controller in virtual memory
|
|
* @irq: reserved interrupt number
|
|
* @complete: completion structure for the last LCD command
|
|
*/
|
|
struct charlcd {
|
|
struct device *dev;
|
|
u32 phybase;
|
|
u32 physize;
|
|
void __iomem *virtbase;
|
|
int irq;
|
|
struct completion complete;
|
|
struct delayed_work init_work;
|
|
};
|
|
|
|
static irqreturn_t charlcd_interrupt(int irq, void *data)
|
|
{
|
|
struct charlcd *lcd = data;
|
|
u8 status;
|
|
|
|
status = readl(lcd->virtbase + CHAR_STAT) & 0x01;
|
|
/* Clear IRQ */
|
|
writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
|
|
if (status)
|
|
complete(&lcd->complete);
|
|
else
|
|
dev_info(lcd->dev, "Spurious IRQ (%02x)\n", status);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
static void charlcd_wait_complete_irq(struct charlcd *lcd)
|
|
{
|
|
int ret;
|
|
|
|
ret = wait_for_completion_interruptible_timeout(&lcd->complete,
|
|
CHARLCD_TIMEOUT);
|
|
/* Disable IRQ after completion */
|
|
writel(0x00, lcd->virtbase + CHAR_MASK);
|
|
|
|
if (ret < 0) {
|
|
dev_err(lcd->dev,
|
|
"wait_for_completion_interruptible_timeout() "
|
|
"returned %d waiting for ready\n", ret);
|
|
return;
|
|
}
|
|
|
|
if (ret == 0) {
|
|
dev_err(lcd->dev, "charlcd controller timed out "
|
|
"waiting for ready\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static u8 charlcd_4bit_read_char(struct charlcd *lcd)
|
|
{
|
|
u8 data;
|
|
u32 val;
|
|
int i;
|
|
|
|
/* If we can, use an IRQ to wait for the data, else poll */
|
|
if (lcd->irq >= 0)
|
|
charlcd_wait_complete_irq(lcd);
|
|
else {
|
|
i = 0;
|
|
val = 0;
|
|
while (!(val & CHAR_RAW_VALID) && i < 10) {
|
|
udelay(100);
|
|
val = readl(lcd->virtbase + CHAR_RAW);
|
|
i++;
|
|
}
|
|
|
|
writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
|
|
}
|
|
msleep(1);
|
|
|
|
/* Read the 4 high bits of the data */
|
|
data = readl(lcd->virtbase + CHAR_RD) & 0xf0;
|
|
|
|
/*
|
|
* The second read for the low bits does not trigger an IRQ
|
|
* so in this case we have to poll for the 4 lower bits
|
|
*/
|
|
i = 0;
|
|
val = 0;
|
|
while (!(val & CHAR_RAW_VALID) && i < 10) {
|
|
udelay(100);
|
|
val = readl(lcd->virtbase + CHAR_RAW);
|
|
i++;
|
|
}
|
|
writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
|
|
msleep(1);
|
|
|
|
/* Read the 4 low bits of the data */
|
|
data |= (readl(lcd->virtbase + CHAR_RD) >> 4) & 0x0f;
|
|
|
|
return data;
|
|
}
|
|
|
|
static bool charlcd_4bit_read_bf(struct charlcd *lcd)
|
|
{
|
|
if (lcd->irq >= 0) {
|
|
/*
|
|
* If we'll use IRQs to wait for the busyflag, clear any
|
|
* pending flag and enable IRQ
|
|
*/
|
|
writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
|
|
init_completion(&lcd->complete);
|
|
writel(0x01, lcd->virtbase + CHAR_MASK);
|
|
}
|
|
readl(lcd->virtbase + CHAR_COM);
|
|
return charlcd_4bit_read_char(lcd) & HD_BUSY_FLAG ? true : false;
|
|
}
|
|
|
|
static void charlcd_4bit_wait_busy(struct charlcd *lcd)
|
|
{
|
|
int retries = 50;
|
|
|
|
udelay(100);
|
|
while (charlcd_4bit_read_bf(lcd) && retries)
|
|
retries--;
|
|
if (!retries)
|
|
dev_err(lcd->dev, "timeout waiting for busyflag\n");
|
|
}
|
|
|
|
static void charlcd_4bit_command(struct charlcd *lcd, u8 cmd)
|
|
{
|
|
u32 cmdlo = (cmd << 4) & 0xf0;
|
|
u32 cmdhi = (cmd & 0xf0);
|
|
|
|
writel(cmdhi, lcd->virtbase + CHAR_COM);
|
|
udelay(10);
|
|
writel(cmdlo, lcd->virtbase + CHAR_COM);
|
|
charlcd_4bit_wait_busy(lcd);
|
|
}
|
|
|
|
static void charlcd_4bit_char(struct charlcd *lcd, u8 ch)
|
|
{
|
|
u32 chlo = (ch << 4) & 0xf0;
|
|
u32 chhi = (ch & 0xf0);
|
|
|
|
writel(chhi, lcd->virtbase + CHAR_DAT);
|
|
udelay(10);
|
|
writel(chlo, lcd->virtbase + CHAR_DAT);
|
|
charlcd_4bit_wait_busy(lcd);
|
|
}
|
|
|
|
static void charlcd_4bit_print(struct charlcd *lcd, int line, const char *str)
|
|
{
|
|
u8 offset;
|
|
int i;
|
|
|
|
/*
|
|
* We support line 0, 1
|
|
* Line 1 runs from 0x00..0x27
|
|
* Line 2 runs from 0x28..0x4f
|
|
*/
|
|
if (line == 0)
|
|
offset = 0;
|
|
else if (line == 1)
|
|
offset = 0x28;
|
|
else
|
|
return;
|
|
|
|
/* Set offset */
|
|
charlcd_4bit_command(lcd, HD_SET_DDRAM | offset);
|
|
|
|
/* Send string */
|
|
for (i = 0; i < strlen(str) && i < 0x28; i++)
|
|
charlcd_4bit_char(lcd, str[i]);
|
|
}
|
|
|
|
static void charlcd_4bit_init(struct charlcd *lcd)
|
|
{
|
|
/* These commands cannot be checked with the busy flag */
|
|
writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
|
|
msleep(5);
|
|
writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
|
|
udelay(100);
|
|
writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
|
|
udelay(100);
|
|
/* Go to 4bit mode */
|
|
writel(HD_FUNCSET, lcd->virtbase + CHAR_COM);
|
|
udelay(100);
|
|
/*
|
|
* 4bit mode, 2 lines, 5x8 font, after this the number of lines
|
|
* and the font cannot be changed until the next initialization sequence
|
|
*/
|
|
charlcd_4bit_command(lcd, HD_FUNCSET | HD_FUNCSET_2_LINES);
|
|
charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
|
|
charlcd_4bit_command(lcd, HD_ENTRYMODE | HD_ENTRYMODE_INCREMENT);
|
|
charlcd_4bit_command(lcd, HD_CLEAR);
|
|
charlcd_4bit_command(lcd, HD_HOME);
|
|
/* Put something useful in the display */
|
|
charlcd_4bit_print(lcd, 0, "ARM Linux");
|
|
charlcd_4bit_print(lcd, 1, UTS_RELEASE);
|
|
}
|
|
|
|
static void charlcd_init_work(struct work_struct *work)
|
|
{
|
|
struct charlcd *lcd =
|
|
container_of(work, struct charlcd, init_work.work);
|
|
|
|
charlcd_4bit_init(lcd);
|
|
}
|
|
|
|
static int __init charlcd_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct charlcd *lcd;
|
|
struct resource *res;
|
|
|
|
lcd = kzalloc(sizeof(struct charlcd), GFP_KERNEL);
|
|
if (!lcd)
|
|
return -ENOMEM;
|
|
|
|
lcd->dev = &pdev->dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
ret = -ENOENT;
|
|
goto out_no_resource;
|
|
}
|
|
lcd->phybase = res->start;
|
|
lcd->physize = resource_size(res);
|
|
|
|
if (request_mem_region(lcd->phybase, lcd->physize,
|
|
DRIVERNAME) == NULL) {
|
|
ret = -EBUSY;
|
|
goto out_no_memregion;
|
|
}
|
|
|
|
lcd->virtbase = ioremap(lcd->phybase, lcd->physize);
|
|
if (!lcd->virtbase) {
|
|
ret = -ENOMEM;
|
|
goto out_no_memregion;
|
|
}
|
|
|
|
lcd->irq = platform_get_irq(pdev, 0);
|
|
/* If no IRQ is supplied, we'll survive without it */
|
|
if (lcd->irq >= 0) {
|
|
if (request_irq(lcd->irq, charlcd_interrupt, 0,
|
|
DRIVERNAME, lcd)) {
|
|
ret = -EIO;
|
|
goto out_no_irq;
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, lcd);
|
|
|
|
/*
|
|
* Initialize the display in a delayed work, because
|
|
* it is VERY slow and would slow down the boot of the system.
|
|
*/
|
|
INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work);
|
|
schedule_delayed_work(&lcd->init_work, 0);
|
|
|
|
dev_info(&pdev->dev, "initialized ARM character LCD at %08x\n",
|
|
lcd->phybase);
|
|
|
|
return 0;
|
|
|
|
out_no_irq:
|
|
iounmap(lcd->virtbase);
|
|
out_no_memregion:
|
|
release_mem_region(lcd->phybase, SZ_4K);
|
|
out_no_resource:
|
|
kfree(lcd);
|
|
return ret;
|
|
}
|
|
|
|
static int __exit charlcd_remove(struct platform_device *pdev)
|
|
{
|
|
struct charlcd *lcd = platform_get_drvdata(pdev);
|
|
|
|
if (lcd) {
|
|
free_irq(lcd->irq, lcd);
|
|
iounmap(lcd->virtbase);
|
|
release_mem_region(lcd->phybase, lcd->physize);
|
|
kfree(lcd);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int charlcd_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct charlcd *lcd = platform_get_drvdata(pdev);
|
|
|
|
/* Power the display off */
|
|
charlcd_4bit_command(lcd, HD_DISPCTRL);
|
|
return 0;
|
|
}
|
|
|
|
static int charlcd_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct charlcd *lcd = platform_get_drvdata(pdev);
|
|
|
|
/* Turn the display back on */
|
|
charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops charlcd_pm_ops = {
|
|
.suspend = charlcd_suspend,
|
|
.resume = charlcd_resume,
|
|
};
|
|
|
|
static const struct of_device_id charlcd_match[] = {
|
|
{ .compatible = "arm,versatile-lcd", },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver charlcd_driver = {
|
|
.driver = {
|
|
.name = DRIVERNAME,
|
|
.owner = THIS_MODULE,
|
|
.pm = &charlcd_pm_ops,
|
|
.of_match_table = of_match_ptr(charlcd_match),
|
|
},
|
|
.remove = __exit_p(charlcd_remove),
|
|
};
|
|
|
|
module_platform_driver_probe(charlcd_driver, charlcd_probe);
|
|
|
|
MODULE_AUTHOR("Linus Walleij <triad@df.lth.se>");
|
|
MODULE_DESCRIPTION("ARM Character LCD Driver");
|
|
MODULE_LICENSE("GPL v2");
|