202 lines
5.1 KiB
C
202 lines
5.1 KiB
C
/*
|
||
* arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
|
||
* V850E2 RTL simulator
|
||
*
|
||
* Copyright (C) 2002,03 NEC Electronics Corporation
|
||
* Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
|
||
*
|
||
* This file is subject to the terms and conditions of the GNU General
|
||
* Public License. See the file COPYING in the main directory of this
|
||
* archive for more details.
|
||
*
|
||
* Written by Miles Bader <miles@gnu.org>
|
||
*/
|
||
|
||
#include <linux/config.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/module.h>
|
||
#include <linux/init.h>
|
||
#include <linux/mm.h>
|
||
#include <linux/swap.h>
|
||
#include <linux/bootmem.h>
|
||
#include <linux/irq.h>
|
||
|
||
#include <asm/atomic.h>
|
||
#include <asm/page.h>
|
||
#include <asm/machdep.h>
|
||
|
||
#include "mach.h"
|
||
|
||
|
||
/* There are 4 possible areas we can use:
|
||
|
||
IRAM (1MB) is fast for instruction fetches, but slow for data
|
||
DRAM (1020KB) is fast for data, but slow for instructions
|
||
ERAM is cached, so should be fast for both insns and data
|
||
SDRAM is external DRAM, similar to ERAM
|
||
*/
|
||
|
||
#define INIT_MEMC_FOR_SDRAM
|
||
#define USE_SDRAM_AREA
|
||
#define KERNEL_IN_SDRAM_AREA
|
||
|
||
#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WT
|
||
/*#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
|
||
|
||
#ifdef USE_SDRAM_AREA
|
||
#define RAM_START SDRAM_ADDR
|
||
#define RAM_END (SDRAM_ADDR + SDRAM_SIZE)
|
||
#else
|
||
/* When we use DRAM, we need to account for the fact that the end of it is
|
||
used for R0_RAM. */
|
||
#define RAM_START DRAM_ADDR
|
||
#define RAM_END R0_RAM_ADDR
|
||
#endif
|
||
|
||
|
||
extern void memcons_setup (void);
|
||
|
||
|
||
#ifdef KERNEL_IN_SDRAM_AREA
|
||
#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
|
||
#else
|
||
#define EARLY_INIT_SECTION_ATTR __init
|
||
#endif
|
||
|
||
void EARLY_INIT_SECTION_ATTR mach_early_init (void)
|
||
{
|
||
/* The sim85e2 simulator tracks `undefined' values, so to make
|
||
debugging easier, we begin by zeroing out all otherwise
|
||
undefined registers. This is not strictly necessary.
|
||
|
||
The registers we zero are:
|
||
Every GPR except:
|
||
stack-pointer (r3)
|
||
task-pointer (r16)
|
||
our return addr (r31)
|
||
Every system register (SPR) that we know about except for
|
||
the PSW (SPR 5), which we zero except for the
|
||
disable-interrupts bit.
|
||
*/
|
||
|
||
/* GPRs */
|
||
asm volatile (" mov r0, r1 ; mov r0, r2 ");
|
||
asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
|
||
asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
|
||
asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
|
||
asm volatile (" mov r0, r17; mov r0, r18; mov r0, r19");
|
||
asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
|
||
asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
|
||
asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
|
||
|
||
/* SPRs */
|
||
asm volatile ("ldsr r0, 0; ldsr r0, 1; ldsr r0, 2; ldsr r0, 3");
|
||
asm volatile ("ldsr r0, 4");
|
||
asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
|
||
asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
|
||
asm volatile ("ldsr r0, 20");
|
||
|
||
|
||
#ifdef INIT_MEMC_FOR_SDRAM
|
||
/* Settings for SDRAM controller. */
|
||
V850E2_VSWC = 0x0042;
|
||
V850E2_BSC = 0x9286;
|
||
V850E2_BCT(0) = 0xb000; /* was: 0 */
|
||
V850E2_BCT(1) = 0x000b;
|
||
V850E2_ASC = 0;
|
||
V850E2_LBS = 0xa9aa; /* was: 0xaaaa */
|
||
V850E2_LBC(0) = 0;
|
||
V850E2_LBC(1) = 0; /* was: 0x3 */
|
||
V850E2_BCC = 0;
|
||
V850E2_RFS(4) = 0x800a; /* was: 0xf109 */
|
||
V850E2_SCR(4) = 0x2091; /* was: 0x20a1 */
|
||
V850E2_RFS(3) = 0x800c;
|
||
V850E2_SCR(3) = 0x20a1;
|
||
V850E2_DWC(0) = 0;
|
||
V850E2_DWC(1) = 0;
|
||
#endif
|
||
|
||
#if 0
|
||
#ifdef CONFIG_V850E2_SIM85E2S
|
||
/* Turn on the caches. */
|
||
V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
|
||
V850E2_BHC = 0x1010;
|
||
#elif CONFIG_V850E2_SIM85E2C
|
||
V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
|
||
V850E2_BUSM_BHC = 0xFFFF;
|
||
#endif
|
||
#else
|
||
V850E2_BHC = 0;
|
||
#endif
|
||
|
||
/* Don't stop the simulator at `halt' instructions. */
|
||
SIM85E2_NOTHAL = 1;
|
||
|
||
/* Ensure that the simulator halts on a panic, instead of going
|
||
into an infinite loop inside the panic function. */
|
||
panic_timeout = -1;
|
||
}
|
||
|
||
void __init mach_setup (char **cmdline)
|
||
{
|
||
memcons_setup ();
|
||
}
|
||
|
||
void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
|
||
{
|
||
*ram_start = RAM_START;
|
||
*ram_len = RAM_END - RAM_START;
|
||
}
|
||
|
||
void __init mach_sched_init (struct irqaction *timer_action)
|
||
{
|
||
/* The simulator actually cycles through all interrupts
|
||
periodically. We just pay attention to IRQ0, which gives us
|
||
1/64 the rate of the periodic interrupts. */
|
||
setup_irq (0, timer_action);
|
||
}
|
||
|
||
void mach_gettimeofday (struct timespec *tv)
|
||
{
|
||
tv->tv_sec = 0;
|
||
tv->tv_nsec = 0;
|
||
}
|
||
|
||
/* Interrupts */
|
||
|
||
struct v850e_intc_irq_init irq_inits[] = {
|
||
{ "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
|
||
{ 0 }
|
||
};
|
||
struct hw_interrupt_type hw_itypes[1];
|
||
|
||
/* Initialize interrupts. */
|
||
void __init mach_init_irqs (void)
|
||
{
|
||
v850e_intc_init_irq_types (irq_inits, hw_itypes);
|
||
}
|
||
|
||
|
||
void machine_halt (void) __attribute__ ((noreturn));
|
||
void machine_halt (void)
|
||
{
|
||
SIM85E2_SIMFIN = 0; /* Halt immediately. */
|
||
for (;;) {}
|
||
}
|
||
|
||
EXPORT_SYMBOL(machine_halt);
|
||
|
||
void machine_restart (char *__unused)
|
||
{
|
||
machine_halt ();
|
||
}
|
||
|
||
EXPORT_SYMBOL(machine_restart);
|
||
|
||
void machine_power_off (void)
|
||
{
|
||
machine_halt ();
|
||
}
|
||
|
||
EXPORT_SYMBOL(machine_power_off);
|