Martin Fuzzey 64a67d4762 mmc: pwrseq_simple: Make reset-gpios optional to match doc ... The DT binding doc says reset-gpios is an optional property but the code currently bails out if it is omitted. This is a regression since it breaks previously working device trees. Fix it by restoring the original documented behaviour. Fixes: ce03727586 ("mmc: pwrseq_simple: use GPIO descriptors array API") Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2016-01-21 13:52:27 +01:00
..
Kconfig	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
Makefile	mmc: pwrseq: add driver for emmc hardware reset	2015-02-04 09:45:09 +01:00
bus.c	mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously	2015-12-22 11:32:16 +01:00
bus.h	mmc: rename dev_to_mmc_card() to mmc_dev_to_card()	2010-10-23 21:11:12 +08:00
core.c	mmc: core: Optimize boot time by detecting cards simultaneously	2015-12-28 10:08:09 +01:00
core.h	mmc: fix mmc_{un,}register_pm_notifier prototypes	2015-12-22 11:32:09 +01:00
debugfs.c	mmc: debugfs: correct wrong voltage value	2016-01-19 10:14:22 +01:00
host.c	mmc: core: Refactor code to register the MMC PM notifier	2015-12-22 11:32:04 +01:00
host.h	mmc: host: Add facility to support re-tuning	2015-06-01 09:06:53 +02:00
mmc.c	mmc: It is not an error for the card to be removed while suspended	2015-12-28 12:51:38 +01:00
mmc_ops.c	mmc: core: fix __mmc_switch timeout caused by preempt	2015-12-22 11:32:18 +01:00
mmc_ops.h	mmc: core: Convert __mmc_switch() into an internal core function	2015-10-26 15:59:54 +01:00
pwrseq.c	mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()	2015-04-17 10:17:19 +02:00
pwrseq.h	mmc: pwrseq: constify mmc_pwrseq_ops structures	2015-12-22 11:32:07 +01:00
pwrseq_emmc.c	mmc: pwrseq: constify mmc_pwrseq_ops structures	2015-12-22 11:32:07 +01:00
pwrseq_simple.c	mmc: pwrseq_simple: Make reset-gpios optional to match doc	2016-01-21 13:52:27 +01:00
quirks.c	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
sd.c	mmc: core: Enable tuning according to the actual timing	2016-01-14 10:59:09 +01:00
sd.h	mmc: drop the speed mode of card's state	2014-05-12 18:05:53 -04:00
sd_ops.c	mmc: sd: warn if card stays busy during init	2014-07-09 11:26:07 +02:00
sd_ops.h	mmc: add erase, secure erase, trim and secure trim operations	2010-08-12 08:43:30 -07:00
sdio.c	mmc: core: Enable tuning according to the actual timing	2016-01-14 10:59:09 +01:00
sdio_bus.c	mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously	2015-12-22 11:32:16 +01:00
sdio_bus.h	…
sdio_cis.c	mmc: sdio_cis: fix unknown tuple for CISTPL_SDIO_STD	2016-01-20 12:39:24 +01:00
sdio_cis.h	…
sdio_io.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_irq.c	mmc: core: Remove MMC_CLKGATE	2015-10-26 16:00:09 +01:00
sdio_ops.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_ops.h	mmc: Add mmc_is_io_op helper function	2015-10-26 16:00:01 +01:00
slot-gpio.c	mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts	2015-01-19 09:56:29 +01:00
slot-gpio.h	mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core	2015-01-19 09:56:17 +01:00