1860 lines
54 KiB
C
1860 lines
54 KiB
C
/*
|
|
* Copyright (c) 2014-2015 MediaTek Inc.
|
|
* Author: Chaotian.Jing <chaotian.jing@mediatek.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/core.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sd.h>
|
|
#include <linux/mmc/sdio.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
|
|
#define MAX_BD_NUM 1024
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Common Definition */
|
|
/*--------------------------------------------------------------------------*/
|
|
#define MSDC_BUS_1BITS 0x0
|
|
#define MSDC_BUS_4BITS 0x1
|
|
#define MSDC_BUS_8BITS 0x2
|
|
|
|
#define MSDC_BURST_64B 0x6
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Register Offset */
|
|
/*--------------------------------------------------------------------------*/
|
|
#define MSDC_CFG 0x0
|
|
#define MSDC_IOCON 0x04
|
|
#define MSDC_PS 0x08
|
|
#define MSDC_INT 0x0c
|
|
#define MSDC_INTEN 0x10
|
|
#define MSDC_FIFOCS 0x14
|
|
#define SDC_CFG 0x30
|
|
#define SDC_CMD 0x34
|
|
#define SDC_ARG 0x38
|
|
#define SDC_STS 0x3c
|
|
#define SDC_RESP0 0x40
|
|
#define SDC_RESP1 0x44
|
|
#define SDC_RESP2 0x48
|
|
#define SDC_RESP3 0x4c
|
|
#define SDC_BLK_NUM 0x50
|
|
#define EMMC_IOCON 0x7c
|
|
#define SDC_ACMD_RESP 0x80
|
|
#define MSDC_DMA_SA 0x90
|
|
#define MSDC_DMA_CTRL 0x98
|
|
#define MSDC_DMA_CFG 0x9c
|
|
#define MSDC_PATCH_BIT 0xb0
|
|
#define MSDC_PATCH_BIT1 0xb4
|
|
#define MSDC_PAD_TUNE 0xec
|
|
#define PAD_DS_TUNE 0x188
|
|
#define PAD_CMD_TUNE 0x18c
|
|
#define EMMC50_CFG0 0x208
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Register Mask */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/* MSDC_CFG mask */
|
|
#define MSDC_CFG_MODE (0x1 << 0) /* RW */
|
|
#define MSDC_CFG_CKPDN (0x1 << 1) /* RW */
|
|
#define MSDC_CFG_RST (0x1 << 2) /* RW */
|
|
#define MSDC_CFG_PIO (0x1 << 3) /* RW */
|
|
#define MSDC_CFG_CKDRVEN (0x1 << 4) /* RW */
|
|
#define MSDC_CFG_BV18SDT (0x1 << 5) /* RW */
|
|
#define MSDC_CFG_BV18PSS (0x1 << 6) /* R */
|
|
#define MSDC_CFG_CKSTB (0x1 << 7) /* R */
|
|
#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
|
|
#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
|
|
#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */
|
|
|
|
/* MSDC_IOCON mask */
|
|
#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
|
|
#define MSDC_IOCON_RSPL (0x1 << 1) /* RW */
|
|
#define MSDC_IOCON_DSPL (0x1 << 2) /* RW */
|
|
#define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */
|
|
#define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */
|
|
#define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */
|
|
#define MSDC_IOCON_W_DSPL (0x1 << 8) /* RW */
|
|
#define MSDC_IOCON_D0SPL (0x1 << 16) /* RW */
|
|
#define MSDC_IOCON_D1SPL (0x1 << 17) /* RW */
|
|
#define MSDC_IOCON_D2SPL (0x1 << 18) /* RW */
|
|
#define MSDC_IOCON_D3SPL (0x1 << 19) /* RW */
|
|
#define MSDC_IOCON_D4SPL (0x1 << 20) /* RW */
|
|
#define MSDC_IOCON_D5SPL (0x1 << 21) /* RW */
|
|
#define MSDC_IOCON_D6SPL (0x1 << 22) /* RW */
|
|
#define MSDC_IOCON_D7SPL (0x1 << 23) /* RW */
|
|
#define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */
|
|
|
|
/* MSDC_PS mask */
|
|
#define MSDC_PS_CDEN (0x1 << 0) /* RW */
|
|
#define MSDC_PS_CDSTS (0x1 << 1) /* R */
|
|
#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
|
|
#define MSDC_PS_DAT (0xff << 16) /* R */
|
|
#define MSDC_PS_CMD (0x1 << 24) /* R */
|
|
#define MSDC_PS_WP (0x1 << 31) /* R */
|
|
|
|
/* MSDC_INT mask */
|
|
#define MSDC_INT_MMCIRQ (0x1 << 0) /* W1C */
|
|
#define MSDC_INT_CDSC (0x1 << 1) /* W1C */
|
|
#define MSDC_INT_ACMDRDY (0x1 << 3) /* W1C */
|
|
#define MSDC_INT_ACMDTMO (0x1 << 4) /* W1C */
|
|
#define MSDC_INT_ACMDCRCERR (0x1 << 5) /* W1C */
|
|
#define MSDC_INT_DMAQ_EMPTY (0x1 << 6) /* W1C */
|
|
#define MSDC_INT_SDIOIRQ (0x1 << 7) /* W1C */
|
|
#define MSDC_INT_CMDRDY (0x1 << 8) /* W1C */
|
|
#define MSDC_INT_CMDTMO (0x1 << 9) /* W1C */
|
|
#define MSDC_INT_RSPCRCERR (0x1 << 10) /* W1C */
|
|
#define MSDC_INT_CSTA (0x1 << 11) /* R */
|
|
#define MSDC_INT_XFER_COMPL (0x1 << 12) /* W1C */
|
|
#define MSDC_INT_DXFER_DONE (0x1 << 13) /* W1C */
|
|
#define MSDC_INT_DATTMO (0x1 << 14) /* W1C */
|
|
#define MSDC_INT_DATCRCERR (0x1 << 15) /* W1C */
|
|
#define MSDC_INT_ACMD19_DONE (0x1 << 16) /* W1C */
|
|
#define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
|
|
#define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
|
|
#define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
|
|
|
|
/* MSDC_INTEN mask */
|
|
#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
|
|
#define MSDC_INTEN_CDSC (0x1 << 1) /* RW */
|
|
#define MSDC_INTEN_ACMDRDY (0x1 << 3) /* RW */
|
|
#define MSDC_INTEN_ACMDTMO (0x1 << 4) /* RW */
|
|
#define MSDC_INTEN_ACMDCRCERR (0x1 << 5) /* RW */
|
|
#define MSDC_INTEN_DMAQ_EMPTY (0x1 << 6) /* RW */
|
|
#define MSDC_INTEN_SDIOIRQ (0x1 << 7) /* RW */
|
|
#define MSDC_INTEN_CMDRDY (0x1 << 8) /* RW */
|
|
#define MSDC_INTEN_CMDTMO (0x1 << 9) /* RW */
|
|
#define MSDC_INTEN_RSPCRCERR (0x1 << 10) /* RW */
|
|
#define MSDC_INTEN_CSTA (0x1 << 11) /* RW */
|
|
#define MSDC_INTEN_XFER_COMPL (0x1 << 12) /* RW */
|
|
#define MSDC_INTEN_DXFER_DONE (0x1 << 13) /* RW */
|
|
#define MSDC_INTEN_DATTMO (0x1 << 14) /* RW */
|
|
#define MSDC_INTEN_DATCRCERR (0x1 << 15) /* RW */
|
|
#define MSDC_INTEN_ACMD19_DONE (0x1 << 16) /* RW */
|
|
#define MSDC_INTEN_DMA_BDCSERR (0x1 << 17) /* RW */
|
|
#define MSDC_INTEN_DMA_GPDCSERR (0x1 << 18) /* RW */
|
|
#define MSDC_INTEN_DMA_PROTECT (0x1 << 19) /* RW */
|
|
|
|
/* MSDC_FIFOCS mask */
|
|
#define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */
|
|
#define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */
|
|
#define MSDC_FIFOCS_CLR (0x1 << 31) /* RW */
|
|
|
|
/* SDC_CFG mask */
|
|
#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
|
|
#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
|
|
#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
|
|
#define SDC_CFG_SDIO (0x1 << 19) /* RW */
|
|
#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
|
|
#define SDC_CFG_INTATGAP (0x1 << 21) /* RW */
|
|
#define SDC_CFG_DTOC (0xff << 24) /* RW */
|
|
|
|
/* SDC_STS mask */
|
|
#define SDC_STS_SDCBUSY (0x1 << 0) /* RW */
|
|
#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
|
|
#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
|
|
|
|
/* MSDC_DMA_CTRL mask */
|
|
#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
|
|
#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
|
|
#define MSDC_DMA_CTRL_RESUME (0x1 << 2) /* W */
|
|
#define MSDC_DMA_CTRL_MODE (0x1 << 8) /* RW */
|
|
#define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) /* RW */
|
|
#define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */
|
|
|
|
/* MSDC_DMA_CFG mask */
|
|
#define MSDC_DMA_CFG_STS (0x1 << 0) /* R */
|
|
#define MSDC_DMA_CFG_DECSEN (0x1 << 1) /* RW */
|
|
#define MSDC_DMA_CFG_AHBHPROT2 (0x2 << 8) /* RW */
|
|
#define MSDC_DMA_CFG_ACTIVEEN (0x2 << 12) /* RW */
|
|
#define MSDC_DMA_CFG_CS12B16B (0x1 << 16) /* RW */
|
|
|
|
/* MSDC_PATCH_BIT mask */
|
|
#define MSDC_PATCH_BIT_ODDSUPP (0x1 << 1) /* RW */
|
|
#define MSDC_INT_DAT_LATCH_CK_SEL (0x7 << 7)
|
|
#define MSDC_CKGEN_MSDC_DLY_SEL (0x1f << 10)
|
|
#define MSDC_PATCH_BIT_IODSSEL (0x1 << 16) /* RW */
|
|
#define MSDC_PATCH_BIT_IOINTSEL (0x1 << 17) /* RW */
|
|
#define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */
|
|
#define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */
|
|
#define MSDC_PATCH_BIT_IDRTSEL (0x1 << 26) /* RW */
|
|
#define MSDC_PATCH_BIT_CMDFSEL (0x1 << 27) /* RW */
|
|
#define MSDC_PATCH_BIT_INTDLSEL (0x1 << 28) /* RW */
|
|
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
|
|
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
|
|
|
|
#define MSDC_PAD_TUNE_DATWRDLY (0x1f << 0) /* RW */
|
|
#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
|
|
#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
|
|
#define MSDC_PAD_TUNE_CMDRRDLY (0x1f << 22) /* RW */
|
|
#define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
|
|
|
|
#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
|
|
#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
|
|
#define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */
|
|
|
|
#define PAD_CMD_TUNE_RX_DLY3 (0x1f << 1) /* RW */
|
|
|
|
#define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0) /* RW */
|
|
#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */
|
|
#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */
|
|
|
|
#define REQ_CMD_EIO (0x1 << 0)
|
|
#define REQ_CMD_TMO (0x1 << 1)
|
|
#define REQ_DAT_ERR (0x1 << 2)
|
|
#define REQ_STOP_EIO (0x1 << 3)
|
|
#define REQ_STOP_TMO (0x1 << 4)
|
|
#define REQ_CMD_BUSY (0x1 << 5)
|
|
|
|
#define MSDC_PREPARE_FLAG (0x1 << 0)
|
|
#define MSDC_ASYNC_FLAG (0x1 << 1)
|
|
#define MSDC_MMAP_FLAG (0x1 << 2)
|
|
|
|
#define MTK_MMC_AUTOSUSPEND_DELAY 50
|
|
#define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */
|
|
#define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */
|
|
|
|
#define PAD_DELAY_MAX 32 /* PAD delay cells */
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Descriptor Structure */
|
|
/*--------------------------------------------------------------------------*/
|
|
struct mt_gpdma_desc {
|
|
u32 gpd_info;
|
|
#define GPDMA_DESC_HWO (0x1 << 0)
|
|
#define GPDMA_DESC_BDP (0x1 << 1)
|
|
#define GPDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
|
|
#define GPDMA_DESC_INT (0x1 << 16)
|
|
u32 next;
|
|
u32 ptr;
|
|
u32 gpd_data_len;
|
|
#define GPDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
|
|
#define GPDMA_DESC_EXTLEN (0xff << 16) /* bit16 ~ bit23 */
|
|
u32 arg;
|
|
u32 blknum;
|
|
u32 cmd;
|
|
};
|
|
|
|
struct mt_bdma_desc {
|
|
u32 bd_info;
|
|
#define BDMA_DESC_EOL (0x1 << 0)
|
|
#define BDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
|
|
#define BDMA_DESC_BLKPAD (0x1 << 17)
|
|
#define BDMA_DESC_DWPAD (0x1 << 18)
|
|
u32 next;
|
|
u32 ptr;
|
|
u32 bd_data_len;
|
|
#define BDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
|
|
};
|
|
|
|
struct msdc_dma {
|
|
struct scatterlist *sg; /* I/O scatter list */
|
|
struct mt_gpdma_desc *gpd; /* pointer to gpd array */
|
|
struct mt_bdma_desc *bd; /* pointer to bd array */
|
|
dma_addr_t gpd_addr; /* the physical address of gpd array */
|
|
dma_addr_t bd_addr; /* the physical address of bd array */
|
|
};
|
|
|
|
struct msdc_save_para {
|
|
u32 msdc_cfg;
|
|
u32 iocon;
|
|
u32 sdc_cfg;
|
|
u32 pad_tune;
|
|
u32 patch_bit0;
|
|
u32 patch_bit1;
|
|
u32 pad_ds_tune;
|
|
u32 pad_cmd_tune;
|
|
u32 emmc50_cfg0;
|
|
};
|
|
|
|
struct msdc_tune_para {
|
|
u32 iocon;
|
|
u32 pad_tune;
|
|
u32 pad_cmd_tune;
|
|
};
|
|
|
|
struct msdc_delay_phase {
|
|
u8 maxlen;
|
|
u8 start;
|
|
u8 final_phase;
|
|
};
|
|
|
|
struct msdc_host {
|
|
struct device *dev;
|
|
struct mmc_host *mmc; /* mmc structure */
|
|
int cmd_rsp;
|
|
|
|
spinlock_t lock;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
int error;
|
|
|
|
void __iomem *base; /* host base address */
|
|
|
|
struct msdc_dma dma; /* dma channel */
|
|
u64 dma_mask;
|
|
|
|
u32 timeout_ns; /* data timeout ns */
|
|
u32 timeout_clks; /* data timeout clks */
|
|
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pins_default;
|
|
struct pinctrl_state *pins_uhs;
|
|
struct delayed_work req_timeout;
|
|
int irq; /* host interrupt */
|
|
|
|
struct clk *src_clk; /* msdc source clock */
|
|
struct clk *h_clk; /* msdc h_clk */
|
|
u32 mclk; /* mmc subsystem clock frequency */
|
|
u32 src_clk_freq; /* source clock frequency */
|
|
u32 sclk; /* SD/MS bus clock frequency */
|
|
unsigned char timing;
|
|
bool vqmmc_enabled;
|
|
u32 hs400_ds_delay;
|
|
u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
|
|
u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
|
|
bool hs400_cmd_resp_sel_rising;
|
|
/* cmd response sample selection for HS400 */
|
|
bool hs400_mode; /* current eMMC will run at hs400 mode */
|
|
struct msdc_save_para save_para; /* used when gate HCLK */
|
|
struct msdc_tune_para def_tune_para; /* default tune setting */
|
|
struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
|
|
};
|
|
|
|
static void sdr_set_bits(void __iomem *reg, u32 bs)
|
|
{
|
|
u32 val = readl(reg);
|
|
|
|
val |= bs;
|
|
writel(val, reg);
|
|
}
|
|
|
|
static void sdr_clr_bits(void __iomem *reg, u32 bs)
|
|
{
|
|
u32 val = readl(reg);
|
|
|
|
val &= ~bs;
|
|
writel(val, reg);
|
|
}
|
|
|
|
static void sdr_set_field(void __iomem *reg, u32 field, u32 val)
|
|
{
|
|
unsigned int tv = readl(reg);
|
|
|
|
tv &= ~field;
|
|
tv |= ((val) << (ffs((unsigned int)field) - 1));
|
|
writel(tv, reg);
|
|
}
|
|
|
|
static void sdr_get_field(void __iomem *reg, u32 field, u32 *val)
|
|
{
|
|
unsigned int tv = readl(reg);
|
|
|
|
*val = ((tv & field) >> (ffs((unsigned int)field) - 1));
|
|
}
|
|
|
|
static void msdc_reset_hw(struct msdc_host *host)
|
|
{
|
|
u32 val;
|
|
|
|
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
|
|
while (readl(host->base + MSDC_CFG) & MSDC_CFG_RST)
|
|
cpu_relax();
|
|
|
|
sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
|
|
while (readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_CLR)
|
|
cpu_relax();
|
|
|
|
val = readl(host->base + MSDC_INT);
|
|
writel(val, host->base + MSDC_INT);
|
|
}
|
|
|
|
static void msdc_cmd_next(struct msdc_host *host,
|
|
struct mmc_request *mrq, struct mmc_command *cmd);
|
|
|
|
static const u32 cmd_ints_mask = MSDC_INTEN_CMDRDY | MSDC_INTEN_RSPCRCERR |
|
|
MSDC_INTEN_CMDTMO | MSDC_INTEN_ACMDRDY |
|
|
MSDC_INTEN_ACMDCRCERR | MSDC_INTEN_ACMDTMO;
|
|
static const u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO |
|
|
MSDC_INTEN_DATCRCERR | MSDC_INTEN_DMA_BDCSERR |
|
|
MSDC_INTEN_DMA_GPDCSERR | MSDC_INTEN_DMA_PROTECT;
|
|
|
|
static u8 msdc_dma_calcs(u8 *buf, u32 len)
|
|
{
|
|
u32 i, sum = 0;
|
|
|
|
for (i = 0; i < len; i++)
|
|
sum += buf[i];
|
|
return 0xff - (u8) sum;
|
|
}
|
|
|
|
static inline void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
|
|
struct mmc_data *data)
|
|
{
|
|
unsigned int j, dma_len;
|
|
dma_addr_t dma_address;
|
|
u32 dma_ctrl;
|
|
struct scatterlist *sg;
|
|
struct mt_gpdma_desc *gpd;
|
|
struct mt_bdma_desc *bd;
|
|
|
|
sg = data->sg;
|
|
|
|
gpd = dma->gpd;
|
|
bd = dma->bd;
|
|
|
|
/* modify gpd */
|
|
gpd->gpd_info |= GPDMA_DESC_HWO;
|
|
gpd->gpd_info |= GPDMA_DESC_BDP;
|
|
/* need to clear first. use these bits to calc checksum */
|
|
gpd->gpd_info &= ~GPDMA_DESC_CHECKSUM;
|
|
gpd->gpd_info |= msdc_dma_calcs((u8 *) gpd, 16) << 8;
|
|
|
|
/* modify bd */
|
|
for_each_sg(data->sg, sg, data->sg_count, j) {
|
|
dma_address = sg_dma_address(sg);
|
|
dma_len = sg_dma_len(sg);
|
|
|
|
/* init bd */
|
|
bd[j].bd_info &= ~BDMA_DESC_BLKPAD;
|
|
bd[j].bd_info &= ~BDMA_DESC_DWPAD;
|
|
bd[j].ptr = (u32)dma_address;
|
|
bd[j].bd_data_len &= ~BDMA_DESC_BUFLEN;
|
|
bd[j].bd_data_len |= (dma_len & BDMA_DESC_BUFLEN);
|
|
|
|
if (j == data->sg_count - 1) /* the last bd */
|
|
bd[j].bd_info |= BDMA_DESC_EOL;
|
|
else
|
|
bd[j].bd_info &= ~BDMA_DESC_EOL;
|
|
|
|
/* checksume need to clear first */
|
|
bd[j].bd_info &= ~BDMA_DESC_CHECKSUM;
|
|
bd[j].bd_info |= msdc_dma_calcs((u8 *)(&bd[j]), 16) << 8;
|
|
}
|
|
|
|
sdr_set_field(host->base + MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, 1);
|
|
dma_ctrl = readl_relaxed(host->base + MSDC_DMA_CTRL);
|
|
dma_ctrl &= ~(MSDC_DMA_CTRL_BRUSTSZ | MSDC_DMA_CTRL_MODE);
|
|
dma_ctrl |= (MSDC_BURST_64B << 12 | 1 << 8);
|
|
writel_relaxed(dma_ctrl, host->base + MSDC_DMA_CTRL);
|
|
writel((u32)dma->gpd_addr, host->base + MSDC_DMA_SA);
|
|
}
|
|
|
|
static void msdc_prepare_data(struct msdc_host *host, struct mmc_request *mrq)
|
|
{
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (!(data->host_cookie & MSDC_PREPARE_FLAG)) {
|
|
data->host_cookie |= MSDC_PREPARE_FLAG;
|
|
data->sg_count = dma_map_sg(host->dev, data->sg, data->sg_len,
|
|
mmc_get_dma_dir(data));
|
|
}
|
|
}
|
|
|
|
static void msdc_unprepare_data(struct msdc_host *host, struct mmc_request *mrq)
|
|
{
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (data->host_cookie & MSDC_ASYNC_FLAG)
|
|
return;
|
|
|
|
if (data->host_cookie & MSDC_PREPARE_FLAG) {
|
|
dma_unmap_sg(host->dev, data->sg, data->sg_len,
|
|
mmc_get_dma_dir(data));
|
|
data->host_cookie &= ~MSDC_PREPARE_FLAG;
|
|
}
|
|
}
|
|
|
|
/* clock control primitives */
|
|
static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
|
|
{
|
|
u32 timeout, clk_ns;
|
|
u32 mode = 0;
|
|
|
|
host->timeout_ns = ns;
|
|
host->timeout_clks = clks;
|
|
if (host->sclk == 0) {
|
|
timeout = 0;
|
|
} else {
|
|
clk_ns = 1000000000UL / host->sclk;
|
|
timeout = (ns + clk_ns - 1) / clk_ns + clks;
|
|
/* in 1048576 sclk cycle unit */
|
|
timeout = (timeout + (0x1 << 20) - 1) >> 20;
|
|
sdr_get_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD, &mode);
|
|
/*DDR mode will double the clk cycles for data timeout */
|
|
timeout = mode >= 2 ? timeout * 2 : timeout;
|
|
timeout = timeout > 1 ? timeout - 1 : 0;
|
|
timeout = timeout > 255 ? 255 : timeout;
|
|
}
|
|
sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, timeout);
|
|
}
|
|
|
|
static void msdc_gate_clock(struct msdc_host *host)
|
|
{
|
|
clk_disable_unprepare(host->src_clk);
|
|
clk_disable_unprepare(host->h_clk);
|
|
}
|
|
|
|
static void msdc_ungate_clock(struct msdc_host *host)
|
|
{
|
|
clk_prepare_enable(host->h_clk);
|
|
clk_prepare_enable(host->src_clk);
|
|
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
|
|
cpu_relax();
|
|
}
|
|
|
|
static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
|
|
{
|
|
u32 mode;
|
|
u32 flags;
|
|
u32 div;
|
|
u32 sclk;
|
|
|
|
if (!hz) {
|
|
dev_dbg(host->dev, "set mclk to 0\n");
|
|
host->mclk = 0;
|
|
sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
|
|
return;
|
|
}
|
|
|
|
flags = readl(host->base + MSDC_INTEN);
|
|
sdr_clr_bits(host->base + MSDC_INTEN, flags);
|
|
sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE);
|
|
if (timing == MMC_TIMING_UHS_DDR50 ||
|
|
timing == MMC_TIMING_MMC_DDR52 ||
|
|
timing == MMC_TIMING_MMC_HS400) {
|
|
if (timing == MMC_TIMING_MMC_HS400)
|
|
mode = 0x3;
|
|
else
|
|
mode = 0x2; /* ddr mode and use divisor */
|
|
|
|
if (hz >= (host->src_clk_freq >> 2)) {
|
|
div = 0; /* mean div = 1/4 */
|
|
sclk = host->src_clk_freq >> 2; /* sclk = clk / 4 */
|
|
} else {
|
|
div = (host->src_clk_freq + ((hz << 2) - 1)) / (hz << 2);
|
|
sclk = (host->src_clk_freq >> 2) / div;
|
|
div = (div >> 1);
|
|
}
|
|
|
|
if (timing == MMC_TIMING_MMC_HS400 &&
|
|
hz >= (host->src_clk_freq >> 1)) {
|
|
sdr_set_bits(host->base + MSDC_CFG,
|
|
MSDC_CFG_HS400_CK_MODE);
|
|
sclk = host->src_clk_freq >> 1;
|
|
div = 0; /* div is ignore when bit18 is set */
|
|
}
|
|
} else if (hz >= host->src_clk_freq) {
|
|
mode = 0x1; /* no divisor */
|
|
div = 0;
|
|
sclk = host->src_clk_freq;
|
|
} else {
|
|
mode = 0x0; /* use divisor */
|
|
if (hz >= (host->src_clk_freq >> 1)) {
|
|
div = 0; /* mean div = 1/2 */
|
|
sclk = host->src_clk_freq >> 1; /* sclk = clk / 2 */
|
|
} else {
|
|
div = (host->src_clk_freq + ((hz << 2) - 1)) / (hz << 2);
|
|
sclk = (host->src_clk_freq >> 2) / div;
|
|
}
|
|
}
|
|
sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
|
|
(mode << 8) | div);
|
|
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
|
|
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
|
|
cpu_relax();
|
|
host->sclk = sclk;
|
|
host->mclk = hz;
|
|
host->timing = timing;
|
|
/* need because clk changed. */
|
|
msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
|
|
sdr_set_bits(host->base + MSDC_INTEN, flags);
|
|
|
|
/*
|
|
* mmc_select_hs400() will drop to 50Mhz and High speed mode,
|
|
* tune result of hs200/200Mhz is not suitable for 50Mhz
|
|
*/
|
|
if (host->sclk <= 52000000) {
|
|
writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
|
|
writel(host->def_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
|
|
} else {
|
|
writel(host->saved_tune_para.iocon, host->base + MSDC_IOCON);
|
|
writel(host->saved_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
|
|
writel(host->saved_tune_para.pad_cmd_tune,
|
|
host->base + PAD_CMD_TUNE);
|
|
}
|
|
|
|
if (timing == MMC_TIMING_MMC_HS400)
|
|
sdr_set_field(host->base + PAD_CMD_TUNE,
|
|
MSDC_PAD_TUNE_CMDRRDLY,
|
|
host->hs400_cmd_int_delay);
|
|
dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing);
|
|
}
|
|
|
|
static inline u32 msdc_cmd_find_resp(struct msdc_host *host,
|
|
struct mmc_request *mrq, struct mmc_command *cmd)
|
|
{
|
|
u32 resp;
|
|
|
|
switch (mmc_resp_type(cmd)) {
|
|
/* Actually, R1, R5, R6, R7 are the same */
|
|
case MMC_RSP_R1:
|
|
resp = 0x1;
|
|
break;
|
|
case MMC_RSP_R1B:
|
|
resp = 0x7;
|
|
break;
|
|
case MMC_RSP_R2:
|
|
resp = 0x2;
|
|
break;
|
|
case MMC_RSP_R3:
|
|
resp = 0x3;
|
|
break;
|
|
case MMC_RSP_NONE:
|
|
default:
|
|
resp = 0x0;
|
|
break;
|
|
}
|
|
|
|
return resp;
|
|
}
|
|
|
|
static inline u32 msdc_cmd_prepare_raw_cmd(struct msdc_host *host,
|
|
struct mmc_request *mrq, struct mmc_command *cmd)
|
|
{
|
|
/* rawcmd :
|
|
* vol_swt << 30 | auto_cmd << 28 | blklen << 16 | go_irq << 15 |
|
|
* stop << 14 | rw << 13 | dtype << 11 | rsptyp << 7 | brk << 6 | opcode
|
|
*/
|
|
u32 opcode = cmd->opcode;
|
|
u32 resp = msdc_cmd_find_resp(host, mrq, cmd);
|
|
u32 rawcmd = (opcode & 0x3f) | ((resp & 0x7) << 7);
|
|
|
|
host->cmd_rsp = resp;
|
|
|
|
if ((opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int) -1) ||
|
|
opcode == MMC_STOP_TRANSMISSION)
|
|
rawcmd |= (0x1 << 14);
|
|
else if (opcode == SD_SWITCH_VOLTAGE)
|
|
rawcmd |= (0x1 << 30);
|
|
else if (opcode == SD_APP_SEND_SCR ||
|
|
opcode == SD_APP_SEND_NUM_WR_BLKS ||
|
|
(opcode == SD_SWITCH && mmc_cmd_type(cmd) == MMC_CMD_ADTC) ||
|
|
(opcode == SD_APP_SD_STATUS && mmc_cmd_type(cmd) == MMC_CMD_ADTC) ||
|
|
(opcode == MMC_SEND_EXT_CSD && mmc_cmd_type(cmd) == MMC_CMD_ADTC))
|
|
rawcmd |= (0x1 << 11);
|
|
|
|
if (cmd->data) {
|
|
struct mmc_data *data = cmd->data;
|
|
|
|
if (mmc_op_multi(opcode)) {
|
|
if (mmc_card_mmc(host->mmc->card) && mrq->sbc &&
|
|
!(mrq->sbc->arg & 0xFFFF0000))
|
|
rawcmd |= 0x2 << 28; /* AutoCMD23 */
|
|
}
|
|
|
|
rawcmd |= ((data->blksz & 0xFFF) << 16);
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
rawcmd |= (0x1 << 13);
|
|
if (data->blocks > 1)
|
|
rawcmd |= (0x2 << 11);
|
|
else
|
|
rawcmd |= (0x1 << 11);
|
|
/* Always use dma mode */
|
|
sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_PIO);
|
|
|
|
if (host->timeout_ns != data->timeout_ns ||
|
|
host->timeout_clks != data->timeout_clks)
|
|
msdc_set_timeout(host, data->timeout_ns,
|
|
data->timeout_clks);
|
|
|
|
writel(data->blocks, host->base + SDC_BLK_NUM);
|
|
}
|
|
return rawcmd;
|
|
}
|
|
|
|
static void msdc_start_data(struct msdc_host *host, struct mmc_request *mrq,
|
|
struct mmc_command *cmd, struct mmc_data *data)
|
|
{
|
|
bool read;
|
|
|
|
WARN_ON(host->data);
|
|
host->data = data;
|
|
read = data->flags & MMC_DATA_READ;
|
|
|
|
mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
|
|
msdc_dma_setup(host, &host->dma, data);
|
|
sdr_set_bits(host->base + MSDC_INTEN, data_ints_mask);
|
|
sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
|
|
dev_dbg(host->dev, "DMA start\n");
|
|
dev_dbg(host->dev, "%s: cmd=%d DMA data: %d blocks; read=%d\n",
|
|
__func__, cmd->opcode, data->blocks, read);
|
|
}
|
|
|
|
static int msdc_auto_cmd_done(struct msdc_host *host, int events,
|
|
struct mmc_command *cmd)
|
|
{
|
|
u32 *rsp = cmd->resp;
|
|
|
|
rsp[0] = readl(host->base + SDC_ACMD_RESP);
|
|
|
|
if (events & MSDC_INT_ACMDRDY) {
|
|
cmd->error = 0;
|
|
} else {
|
|
msdc_reset_hw(host);
|
|
if (events & MSDC_INT_ACMDCRCERR) {
|
|
cmd->error = -EILSEQ;
|
|
host->error |= REQ_STOP_EIO;
|
|
} else if (events & MSDC_INT_ACMDTMO) {
|
|
cmd->error = -ETIMEDOUT;
|
|
host->error |= REQ_STOP_TMO;
|
|
}
|
|
dev_err(host->dev,
|
|
"%s: AUTO_CMD%d arg=%08X; rsp %08X; cmd_error=%d\n",
|
|
__func__, cmd->opcode, cmd->arg, rsp[0], cmd->error);
|
|
}
|
|
return cmd->error;
|
|
}
|
|
|
|
static void msdc_track_cmd_data(struct msdc_host *host,
|
|
struct mmc_command *cmd, struct mmc_data *data)
|
|
{
|
|
if (host->error)
|
|
dev_dbg(host->dev, "%s: cmd=%d arg=%08X; host->error=0x%08X\n",
|
|
__func__, cmd->opcode, cmd->arg, host->error);
|
|
}
|
|
|
|
static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
|
|
{
|
|
unsigned long flags;
|
|
bool ret;
|
|
|
|
ret = cancel_delayed_work(&host->req_timeout);
|
|
if (!ret) {
|
|
/* delay work already running */
|
|
return;
|
|
}
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
host->mrq = NULL;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
msdc_track_cmd_data(host, mrq->cmd, mrq->data);
|
|
if (mrq->data)
|
|
msdc_unprepare_data(host, mrq);
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
|
|
/* returns true if command is fully handled; returns false otherwise */
|
|
static bool msdc_cmd_done(struct msdc_host *host, int events,
|
|
struct mmc_request *mrq, struct mmc_command *cmd)
|
|
{
|
|
bool done = false;
|
|
bool sbc_error;
|
|
unsigned long flags;
|
|
u32 *rsp = cmd->resp;
|
|
|
|
if (mrq->sbc && cmd == mrq->cmd &&
|
|
(events & (MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR
|
|
| MSDC_INT_ACMDTMO)))
|
|
msdc_auto_cmd_done(host, events, mrq->sbc);
|
|
|
|
sbc_error = mrq->sbc && mrq->sbc->error;
|
|
|
|
if (!sbc_error && !(events & (MSDC_INT_CMDRDY
|
|
| MSDC_INT_RSPCRCERR
|
|
| MSDC_INT_CMDTMO)))
|
|
return done;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
done = !host->cmd;
|
|
host->cmd = NULL;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
if (done)
|
|
return true;
|
|
|
|
sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask);
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
rsp[0] = readl(host->base + SDC_RESP3);
|
|
rsp[1] = readl(host->base + SDC_RESP2);
|
|
rsp[2] = readl(host->base + SDC_RESP1);
|
|
rsp[3] = readl(host->base + SDC_RESP0);
|
|
} else {
|
|
rsp[0] = readl(host->base + SDC_RESP0);
|
|
}
|
|
}
|
|
|
|
if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
|
|
if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
|
|
cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
|
|
/*
|
|
* should not clear fifo/interrupt as the tune data
|
|
* may have alreay come.
|
|
*/
|
|
msdc_reset_hw(host);
|
|
if (events & MSDC_INT_RSPCRCERR) {
|
|
cmd->error = -EILSEQ;
|
|
host->error |= REQ_CMD_EIO;
|
|
} else if (events & MSDC_INT_CMDTMO) {
|
|
cmd->error = -ETIMEDOUT;
|
|
host->error |= REQ_CMD_TMO;
|
|
}
|
|
}
|
|
if (cmd->error)
|
|
dev_dbg(host->dev,
|
|
"%s: cmd=%d arg=%08X; rsp %08X; cmd_error=%d\n",
|
|
__func__, cmd->opcode, cmd->arg, rsp[0],
|
|
cmd->error);
|
|
|
|
msdc_cmd_next(host, mrq, cmd);
|
|
return true;
|
|
}
|
|
|
|
/* It is the core layer's responsibility to ensure card status
|
|
* is correct before issue a request. but host design do below
|
|
* checks recommended.
|
|
*/
|
|
static inline bool msdc_cmd_is_ready(struct msdc_host *host,
|
|
struct mmc_request *mrq, struct mmc_command *cmd)
|
|
{
|
|
/* The max busy time we can endure is 20ms */
|
|
unsigned long tmo = jiffies + msecs_to_jiffies(20);
|
|
|
|
while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
|
|
time_before(jiffies, tmo))
|
|
cpu_relax();
|
|
if (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) {
|
|
dev_err(host->dev, "CMD bus busy detected\n");
|
|
host->error |= REQ_CMD_BUSY;
|
|
msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
|
|
return false;
|
|
}
|
|
|
|
if (mmc_resp_type(cmd) == MMC_RSP_R1B || cmd->data) {
|
|
tmo = jiffies + msecs_to_jiffies(20);
|
|
/* R1B or with data, should check SDCBUSY */
|
|
while ((readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) &&
|
|
time_before(jiffies, tmo))
|
|
cpu_relax();
|
|
if (readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) {
|
|
dev_err(host->dev, "Controller busy detected\n");
|
|
host->error |= REQ_CMD_BUSY;
|
|
msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
|
|
return false;
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static void msdc_start_command(struct msdc_host *host,
|
|
struct mmc_request *mrq, struct mmc_command *cmd)
|
|
{
|
|
u32 rawcmd;
|
|
|
|
WARN_ON(host->cmd);
|
|
host->cmd = cmd;
|
|
|
|
if (!msdc_cmd_is_ready(host, mrq, cmd))
|
|
return;
|
|
|
|
if ((readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16 ||
|
|
readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) {
|
|
dev_err(host->dev, "TX/RX FIFO non-empty before start of IO. Reset\n");
|
|
msdc_reset_hw(host);
|
|
}
|
|
|
|
cmd->error = 0;
|
|
rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
|
|
mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
|
|
|
|
sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask);
|
|
writel(cmd->arg, host->base + SDC_ARG);
|
|
writel(rawcmd, host->base + SDC_CMD);
|
|
}
|
|
|
|
static void msdc_cmd_next(struct msdc_host *host,
|
|
struct mmc_request *mrq, struct mmc_command *cmd)
|
|
{
|
|
if ((cmd->error &&
|
|
!(cmd->error == -EILSEQ &&
|
|
(cmd->opcode == MMC_SEND_TUNING_BLOCK ||
|
|
cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))) ||
|
|
(mrq->sbc && mrq->sbc->error))
|
|
msdc_request_done(host, mrq);
|
|
else if (cmd == mrq->sbc)
|
|
msdc_start_command(host, mrq, mrq->cmd);
|
|
else if (!cmd->data)
|
|
msdc_request_done(host, mrq);
|
|
else
|
|
msdc_start_data(host, mrq, cmd, cmd->data);
|
|
}
|
|
|
|
static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
|
|
host->error = 0;
|
|
WARN_ON(host->mrq);
|
|
host->mrq = mrq;
|
|
|
|
if (mrq->data)
|
|
msdc_prepare_data(host, mrq);
|
|
|
|
/* if SBC is required, we have HW option and SW option.
|
|
* if HW option is enabled, and SBC does not have "special" flags,
|
|
* use HW option, otherwise use SW option
|
|
*/
|
|
if (mrq->sbc && (!mmc_card_mmc(mmc->card) ||
|
|
(mrq->sbc->arg & 0xFFFF0000)))
|
|
msdc_start_command(host, mrq, mrq->sbc);
|
|
else
|
|
msdc_start_command(host, mrq, mrq->cmd);
|
|
}
|
|
|
|
static void msdc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
msdc_prepare_data(host, mrq);
|
|
data->host_cookie |= MSDC_ASYNC_FLAG;
|
|
}
|
|
|
|
static void msdc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
|
|
int err)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
struct mmc_data *data;
|
|
|
|
data = mrq->data;
|
|
if (!data)
|
|
return;
|
|
if (data->host_cookie) {
|
|
data->host_cookie &= ~MSDC_ASYNC_FLAG;
|
|
msdc_unprepare_data(host, mrq);
|
|
}
|
|
}
|
|
|
|
static void msdc_data_xfer_next(struct msdc_host *host,
|
|
struct mmc_request *mrq, struct mmc_data *data)
|
|
{
|
|
if (mmc_op_multi(mrq->cmd->opcode) && mrq->stop && !mrq->stop->error &&
|
|
!mrq->sbc)
|
|
msdc_start_command(host, mrq, mrq->stop);
|
|
else
|
|
msdc_request_done(host, mrq);
|
|
}
|
|
|
|
static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
|
|
struct mmc_request *mrq, struct mmc_data *data)
|
|
{
|
|
struct mmc_command *stop = data->stop;
|
|
unsigned long flags;
|
|
bool done;
|
|
unsigned int check_data = events &
|
|
(MSDC_INT_XFER_COMPL | MSDC_INT_DATCRCERR | MSDC_INT_DATTMO
|
|
| MSDC_INT_DMA_BDCSERR | MSDC_INT_DMA_GPDCSERR
|
|
| MSDC_INT_DMA_PROTECT);
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
done = !host->data;
|
|
if (check_data)
|
|
host->data = NULL;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
if (done)
|
|
return true;
|
|
|
|
if (check_data || (stop && stop->error)) {
|
|
dev_dbg(host->dev, "DMA status: 0x%8X\n",
|
|
readl(host->base + MSDC_DMA_CFG));
|
|
sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP,
|
|
1);
|
|
while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
|
|
cpu_relax();
|
|
sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask);
|
|
dev_dbg(host->dev, "DMA stop\n");
|
|
|
|
if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) {
|
|
data->bytes_xfered = data->blocks * data->blksz;
|
|
} else {
|
|
dev_dbg(host->dev, "interrupt events: %x\n", events);
|
|
msdc_reset_hw(host);
|
|
host->error |= REQ_DAT_ERR;
|
|
data->bytes_xfered = 0;
|
|
|
|
if (events & MSDC_INT_DATTMO)
|
|
data->error = -ETIMEDOUT;
|
|
else if (events & MSDC_INT_DATCRCERR)
|
|
data->error = -EILSEQ;
|
|
|
|
dev_dbg(host->dev, "%s: cmd=%d; blocks=%d",
|
|
__func__, mrq->cmd->opcode, data->blocks);
|
|
dev_dbg(host->dev, "data_error=%d xfer_size=%d\n",
|
|
(int)data->error, data->bytes_xfered);
|
|
}
|
|
|
|
msdc_data_xfer_next(host, mrq, data);
|
|
done = true;
|
|
}
|
|
return done;
|
|
}
|
|
|
|
static void msdc_set_buswidth(struct msdc_host *host, u32 width)
|
|
{
|
|
u32 val = readl(host->base + SDC_CFG);
|
|
|
|
val &= ~SDC_CFG_BUSWIDTH;
|
|
|
|
switch (width) {
|
|
default:
|
|
case MMC_BUS_WIDTH_1:
|
|
val |= (MSDC_BUS_1BITS << 16);
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
val |= (MSDC_BUS_4BITS << 16);
|
|
break;
|
|
case MMC_BUS_WIDTH_8:
|
|
val |= (MSDC_BUS_8BITS << 16);
|
|
break;
|
|
}
|
|
|
|
writel(val, host->base + SDC_CFG);
|
|
dev_dbg(host->dev, "Bus Width = %d", width);
|
|
}
|
|
|
|
static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
int ret = 0;
|
|
|
|
if (!IS_ERR(mmc->supply.vqmmc)) {
|
|
if (ios->signal_voltage != MMC_SIGNAL_VOLTAGE_330 &&
|
|
ios->signal_voltage != MMC_SIGNAL_VOLTAGE_180) {
|
|
dev_err(host->dev, "Unsupported signal voltage!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = mmc_regulator_set_vqmmc(mmc, ios);
|
|
if (ret) {
|
|
dev_dbg(host->dev, "Regulator set error %d (%d)\n",
|
|
ret, ios->signal_voltage);
|
|
} else {
|
|
/* Apply different pinctrl settings for different signal voltage */
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
|
|
pinctrl_select_state(host->pinctrl, host->pins_uhs);
|
|
else
|
|
pinctrl_select_state(host->pinctrl, host->pins_default);
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int msdc_card_busy(struct mmc_host *mmc)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
u32 status = readl(host->base + MSDC_PS);
|
|
|
|
/* only check if data0 is low */
|
|
return !(status & BIT(16));
|
|
}
|
|
|
|
static void msdc_request_timeout(struct work_struct *work)
|
|
{
|
|
struct msdc_host *host = container_of(work, struct msdc_host,
|
|
req_timeout.work);
|
|
|
|
/* simulate HW timeout status */
|
|
dev_err(host->dev, "%s: aborting cmd/data/mrq\n", __func__);
|
|
if (host->mrq) {
|
|
dev_err(host->dev, "%s: aborting mrq=%p cmd=%d\n", __func__,
|
|
host->mrq, host->mrq->cmd->opcode);
|
|
if (host->cmd) {
|
|
dev_err(host->dev, "%s: aborting cmd=%d\n",
|
|
__func__, host->cmd->opcode);
|
|
msdc_cmd_done(host, MSDC_INT_CMDTMO, host->mrq,
|
|
host->cmd);
|
|
} else if (host->data) {
|
|
dev_err(host->dev, "%s: abort data: cmd%d; %d blocks\n",
|
|
__func__, host->mrq->cmd->opcode,
|
|
host->data->blocks);
|
|
msdc_data_xfer_done(host, MSDC_INT_DATTMO, host->mrq,
|
|
host->data);
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t msdc_irq(int irq, void *dev_id)
|
|
{
|
|
struct msdc_host *host = (struct msdc_host *) dev_id;
|
|
|
|
while (true) {
|
|
unsigned long flags;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
u32 events, event_mask;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
events = readl(host->base + MSDC_INT);
|
|
event_mask = readl(host->base + MSDC_INTEN);
|
|
/* clear interrupts */
|
|
writel(events & event_mask, host->base + MSDC_INT);
|
|
|
|
mrq = host->mrq;
|
|
cmd = host->cmd;
|
|
data = host->data;
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
if (!(events & event_mask))
|
|
break;
|
|
|
|
if (!mrq) {
|
|
dev_err(host->dev,
|
|
"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
|
|
__func__, events, event_mask);
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
|
|
dev_dbg(host->dev, "%s: events=%08X\n", __func__, events);
|
|
|
|
if (cmd)
|
|
msdc_cmd_done(host, events, mrq, cmd);
|
|
else if (data)
|
|
msdc_data_xfer_done(host, events, mrq, data);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void msdc_init_hw(struct msdc_host *host)
|
|
{
|
|
u32 val;
|
|
|
|
/* Configure to MMC/SD mode, clock free running */
|
|
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_MODE | MSDC_CFG_CKPDN);
|
|
|
|
/* Reset */
|
|
msdc_reset_hw(host);
|
|
|
|
/* Disable card detection */
|
|
sdr_clr_bits(host->base + MSDC_PS, MSDC_PS_CDEN);
|
|
|
|
/* Disable and clear all interrupts */
|
|
writel(0, host->base + MSDC_INTEN);
|
|
val = readl(host->base + MSDC_INT);
|
|
writel(val, host->base + MSDC_INT);
|
|
|
|
writel(0, host->base + MSDC_PAD_TUNE);
|
|
writel(0, host->base + MSDC_IOCON);
|
|
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
|
|
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
|
|
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
|
|
writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
|
|
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
|
|
|
|
/* Configure to enable SDIO mode.
|
|
* it's must otherwise sdio cmd5 failed
|
|
*/
|
|
sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
|
|
|
|
/* disable detect SDIO device interrupt function */
|
|
sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
|
|
|
|
/* Configure to default data timeout */
|
|
sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
|
|
|
|
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
|
|
host->def_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
|
|
dev_dbg(host->dev, "init hardware done!");
|
|
}
|
|
|
|
static void msdc_deinit_hw(struct msdc_host *host)
|
|
{
|
|
u32 val;
|
|
/* Disable and clear all interrupts */
|
|
writel(0, host->base + MSDC_INTEN);
|
|
|
|
val = readl(host->base + MSDC_INT);
|
|
writel(val, host->base + MSDC_INT);
|
|
}
|
|
|
|
/* init gpd and bd list in msdc_drv_probe */
|
|
static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
|
|
{
|
|
struct mt_gpdma_desc *gpd = dma->gpd;
|
|
struct mt_bdma_desc *bd = dma->bd;
|
|
int i;
|
|
|
|
memset(gpd, 0, sizeof(struct mt_gpdma_desc) * 2);
|
|
|
|
gpd->gpd_info = GPDMA_DESC_BDP; /* hwo, cs, bd pointer */
|
|
gpd->ptr = (u32)dma->bd_addr; /* physical address */
|
|
/* gpd->next is must set for desc DMA
|
|
* That's why must alloc 2 gpd structure.
|
|
*/
|
|
gpd->next = (u32)dma->gpd_addr + sizeof(struct mt_gpdma_desc);
|
|
memset(bd, 0, sizeof(struct mt_bdma_desc) * MAX_BD_NUM);
|
|
for (i = 0; i < (MAX_BD_NUM - 1); i++)
|
|
bd[i].next = (u32)dma->bd_addr + sizeof(*bd) * (i + 1);
|
|
}
|
|
|
|
static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
int ret;
|
|
|
|
msdc_set_buswidth(host, ios->bus_width);
|
|
|
|
/* Suspend/Resume will do power off/on */
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_UP:
|
|
if (!IS_ERR(mmc->supply.vmmc)) {
|
|
msdc_init_hw(host);
|
|
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
|
|
ios->vdd);
|
|
if (ret) {
|
|
dev_err(host->dev, "Failed to set vmmc power!\n");
|
|
return;
|
|
}
|
|
}
|
|
break;
|
|
case MMC_POWER_ON:
|
|
if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
|
|
ret = regulator_enable(mmc->supply.vqmmc);
|
|
if (ret)
|
|
dev_err(host->dev, "Failed to set vqmmc power!\n");
|
|
else
|
|
host->vqmmc_enabled = true;
|
|
}
|
|
break;
|
|
case MMC_POWER_OFF:
|
|
if (!IS_ERR(mmc->supply.vmmc))
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
|
|
|
|
if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
|
|
regulator_disable(mmc->supply.vqmmc);
|
|
host->vqmmc_enabled = false;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (host->mclk != ios->clock || host->timing != ios->timing)
|
|
msdc_set_mclk(host, ios->timing, ios->clock);
|
|
}
|
|
|
|
static u32 test_delay_bit(u32 delay, u32 bit)
|
|
{
|
|
bit %= PAD_DELAY_MAX;
|
|
return delay & (1 << bit);
|
|
}
|
|
|
|
static int get_delay_len(u32 delay, u32 start_bit)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < (PAD_DELAY_MAX - start_bit); i++) {
|
|
if (test_delay_bit(delay, start_bit + i) == 0)
|
|
return i;
|
|
}
|
|
return PAD_DELAY_MAX - start_bit;
|
|
}
|
|
|
|
static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
|
|
{
|
|
int start = 0, len = 0;
|
|
int start_final = 0, len_final = 0;
|
|
u8 final_phase = 0xff;
|
|
struct msdc_delay_phase delay_phase = { 0, };
|
|
|
|
if (delay == 0) {
|
|
dev_err(host->dev, "phase error: [map:%x]\n", delay);
|
|
delay_phase.final_phase = final_phase;
|
|
return delay_phase;
|
|
}
|
|
|
|
while (start < PAD_DELAY_MAX) {
|
|
len = get_delay_len(delay, start);
|
|
if (len_final < len) {
|
|
start_final = start;
|
|
len_final = len;
|
|
}
|
|
start += len ? len : 1;
|
|
if (len >= 12 && start_final < 4)
|
|
break;
|
|
}
|
|
|
|
/* The rule is that to find the smallest delay cell */
|
|
if (start_final == 0)
|
|
final_phase = (start_final + len_final / 3) % PAD_DELAY_MAX;
|
|
else
|
|
final_phase = (start_final + len_final / 2) % PAD_DELAY_MAX;
|
|
dev_info(host->dev, "phase: [map:%x] [maxlen:%d] [final:%d]\n",
|
|
delay, len_final, final_phase);
|
|
|
|
delay_phase.maxlen = len_final;
|
|
delay_phase.start = start_final;
|
|
delay_phase.final_phase = final_phase;
|
|
return delay_phase;
|
|
}
|
|
|
|
static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
u32 rise_delay = 0, fall_delay = 0;
|
|
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
|
|
struct msdc_delay_phase internal_delay_phase;
|
|
u8 final_delay, final_maxlen;
|
|
u32 internal_delay = 0;
|
|
int cmd_err;
|
|
int i, j;
|
|
|
|
if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
|
|
mmc->ios.timing == MMC_TIMING_UHS_SDR104)
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_CMDRRDLY,
|
|
host->hs200_cmd_int_delay);
|
|
|
|
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
|
|
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_CMDRDLY, i);
|
|
/*
|
|
* Using the same parameters, it may sometimes pass the test,
|
|
* but sometimes it may fail. To make sure the parameters are
|
|
* more stable, we test each set of parameters 3 times.
|
|
*/
|
|
for (j = 0; j < 3; j++) {
|
|
mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!cmd_err) {
|
|
rise_delay |= (1 << i);
|
|
} else {
|
|
rise_delay &= ~(1 << i);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
final_rise_delay = get_best_delay(host, rise_delay);
|
|
/* if rising edge has enough margin, then do not scan falling edge */
|
|
if (final_rise_delay.maxlen >= 12 && final_rise_delay.start < 4)
|
|
goto skip_fall;
|
|
|
|
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_CMDRDLY, i);
|
|
/*
|
|
* Using the same parameters, it may sometimes pass the test,
|
|
* but sometimes it may fail. To make sure the parameters are
|
|
* more stable, we test each set of parameters 3 times.
|
|
*/
|
|
for (j = 0; j < 3; j++) {
|
|
mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!cmd_err) {
|
|
fall_delay |= (1 << i);
|
|
} else {
|
|
fall_delay &= ~(1 << i);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
final_fall_delay = get_best_delay(host, fall_delay);
|
|
|
|
skip_fall:
|
|
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
|
|
if (final_fall_delay.maxlen >= 12 && final_fall_delay.start < 4)
|
|
final_maxlen = final_fall_delay.maxlen;
|
|
if (final_maxlen == final_rise_delay.maxlen) {
|
|
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
|
|
final_rise_delay.final_phase);
|
|
final_delay = final_rise_delay.final_phase;
|
|
} else {
|
|
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
|
|
final_fall_delay.final_phase);
|
|
final_delay = final_fall_delay.final_phase;
|
|
}
|
|
if (host->hs200_cmd_int_delay)
|
|
goto skip_internal;
|
|
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_CMDRRDLY, i);
|
|
mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!cmd_err)
|
|
internal_delay |= (1 << i);
|
|
}
|
|
dev_dbg(host->dev, "Final internal delay: 0x%x\n", internal_delay);
|
|
internal_delay_phase = get_best_delay(host, internal_delay);
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY,
|
|
internal_delay_phase.final_phase);
|
|
skip_internal:
|
|
dev_dbg(host->dev, "Final cmd pad delay: %x\n", final_delay);
|
|
return final_delay == 0xff ? -EIO : 0;
|
|
}
|
|
|
|
static int hs400_tune_response(struct mmc_host *mmc, u32 opcode)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
u32 cmd_delay = 0;
|
|
struct msdc_delay_phase final_cmd_delay = { 0,};
|
|
u8 final_delay;
|
|
int cmd_err;
|
|
int i, j;
|
|
|
|
/* select EMMC50 PAD CMD tune */
|
|
sdr_set_bits(host->base + PAD_CMD_TUNE, BIT(0));
|
|
|
|
if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
|
|
mmc->ios.timing == MMC_TIMING_UHS_SDR104)
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_CMDRRDLY,
|
|
host->hs200_cmd_int_delay);
|
|
|
|
if (host->hs400_cmd_resp_sel_rising)
|
|
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
|
|
else
|
|
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
|
|
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
|
|
sdr_set_field(host->base + PAD_CMD_TUNE,
|
|
PAD_CMD_TUNE_RX_DLY3, i);
|
|
/*
|
|
* Using the same parameters, it may sometimes pass the test,
|
|
* but sometimes it may fail. To make sure the parameters are
|
|
* more stable, we test each set of parameters 3 times.
|
|
*/
|
|
for (j = 0; j < 3; j++) {
|
|
mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!cmd_err) {
|
|
cmd_delay |= (1 << i);
|
|
} else {
|
|
cmd_delay &= ~(1 << i);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
final_cmd_delay = get_best_delay(host, cmd_delay);
|
|
sdr_set_field(host->base + PAD_CMD_TUNE, PAD_CMD_TUNE_RX_DLY3,
|
|
final_cmd_delay.final_phase);
|
|
final_delay = final_cmd_delay.final_phase;
|
|
|
|
dev_dbg(host->dev, "Final cmd pad delay: %x\n", final_delay);
|
|
return final_delay == 0xff ? -EIO : 0;
|
|
}
|
|
|
|
static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
u32 rise_delay = 0, fall_delay = 0;
|
|
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
|
|
u8 final_delay, final_maxlen;
|
|
int i, ret;
|
|
|
|
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
|
|
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
|
|
for (i = 0 ; i < PAD_DELAY_MAX; i++) {
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_DATRRDLY, i);
|
|
ret = mmc_send_tuning(mmc, opcode, NULL);
|
|
if (!ret)
|
|
rise_delay |= (1 << i);
|
|
}
|
|
final_rise_delay = get_best_delay(host, rise_delay);
|
|
/* if rising edge has enough margin, then do not scan falling edge */
|
|
if (final_rise_delay.maxlen >= 12 ||
|
|
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
|
|
goto skip_fall;
|
|
|
|
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
|
|
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_DATRRDLY, i);
|
|
ret = mmc_send_tuning(mmc, opcode, NULL);
|
|
if (!ret)
|
|
fall_delay |= (1 << i);
|
|
}
|
|
final_fall_delay = get_best_delay(host, fall_delay);
|
|
|
|
skip_fall:
|
|
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
|
|
if (final_maxlen == final_rise_delay.maxlen) {
|
|
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
|
|
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_DATRRDLY,
|
|
final_rise_delay.final_phase);
|
|
final_delay = final_rise_delay.final_phase;
|
|
} else {
|
|
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
|
|
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
|
|
sdr_set_field(host->base + MSDC_PAD_TUNE,
|
|
MSDC_PAD_TUNE_DATRRDLY,
|
|
final_fall_delay.final_phase);
|
|
final_delay = final_fall_delay.final_phase;
|
|
}
|
|
|
|
dev_dbg(host->dev, "Final data pad delay: %x\n", final_delay);
|
|
return final_delay == 0xff ? -EIO : 0;
|
|
}
|
|
|
|
static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
int ret;
|
|
|
|
if (host->hs400_mode)
|
|
ret = hs400_tune_response(mmc, opcode);
|
|
else
|
|
ret = msdc_tune_response(mmc, opcode);
|
|
if (ret == -EIO) {
|
|
dev_err(host->dev, "Tune response fail!\n");
|
|
return ret;
|
|
}
|
|
if (host->hs400_mode == false) {
|
|
ret = msdc_tune_data(mmc, opcode);
|
|
if (ret == -EIO)
|
|
dev_err(host->dev, "Tune data fail!\n");
|
|
}
|
|
|
|
host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
|
|
host->saved_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
|
|
host->saved_tune_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
|
|
return ret;
|
|
}
|
|
|
|
static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
host->hs400_mode = true;
|
|
|
|
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
|
|
return 0;
|
|
}
|
|
|
|
static void msdc_hw_reset(struct mmc_host *mmc)
|
|
{
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
|
|
sdr_set_bits(host->base + EMMC_IOCON, 1);
|
|
udelay(10); /* 10us is enough */
|
|
sdr_clr_bits(host->base + EMMC_IOCON, 1);
|
|
}
|
|
|
|
static struct mmc_host_ops mt_msdc_ops = {
|
|
.post_req = msdc_post_req,
|
|
.pre_req = msdc_pre_req,
|
|
.request = msdc_ops_request,
|
|
.set_ios = msdc_ops_set_ios,
|
|
.get_ro = mmc_gpio_get_ro,
|
|
.start_signal_voltage_switch = msdc_ops_switch_volt,
|
|
.card_busy = msdc_card_busy,
|
|
.execute_tuning = msdc_execute_tuning,
|
|
.prepare_hs400_tuning = msdc_prepare_hs400_tuning,
|
|
.hw_reset = msdc_hw_reset,
|
|
};
|
|
|
|
static void msdc_of_property_parse(struct platform_device *pdev,
|
|
struct msdc_host *host)
|
|
{
|
|
of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
|
|
&host->hs400_ds_delay);
|
|
|
|
of_property_read_u32(pdev->dev.of_node, "mediatek,hs200-cmd-int-delay",
|
|
&host->hs200_cmd_int_delay);
|
|
|
|
of_property_read_u32(pdev->dev.of_node, "mediatek,hs400-cmd-int-delay",
|
|
&host->hs400_cmd_int_delay);
|
|
|
|
if (of_property_read_bool(pdev->dev.of_node,
|
|
"mediatek,hs400-cmd-resp-sel-rising"))
|
|
host->hs400_cmd_resp_sel_rising = true;
|
|
else
|
|
host->hs400_cmd_resp_sel_rising = false;
|
|
}
|
|
|
|
static int msdc_drv_probe(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct msdc_host *host;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
if (!pdev->dev.of_node) {
|
|
dev_err(&pdev->dev, "No DT found\n");
|
|
return -EINVAL;
|
|
}
|
|
/* Allocate MMC host for this device */
|
|
mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
|
|
if (!mmc)
|
|
return -ENOMEM;
|
|
|
|
host = mmc_priv(mmc);
|
|
ret = mmc_of_parse(mmc);
|
|
if (ret)
|
|
goto host_free;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
host->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(host->base)) {
|
|
ret = PTR_ERR(host->base);
|
|
goto host_free;
|
|
}
|
|
|
|
ret = mmc_regulator_get_supply(mmc);
|
|
if (ret == -EPROBE_DEFER)
|
|
goto host_free;
|
|
|
|
host->src_clk = devm_clk_get(&pdev->dev, "source");
|
|
if (IS_ERR(host->src_clk)) {
|
|
ret = PTR_ERR(host->src_clk);
|
|
goto host_free;
|
|
}
|
|
|
|
host->h_clk = devm_clk_get(&pdev->dev, "hclk");
|
|
if (IS_ERR(host->h_clk)) {
|
|
ret = PTR_ERR(host->h_clk);
|
|
goto host_free;
|
|
}
|
|
|
|
host->irq = platform_get_irq(pdev, 0);
|
|
if (host->irq < 0) {
|
|
ret = -EINVAL;
|
|
goto host_free;
|
|
}
|
|
|
|
host->pinctrl = devm_pinctrl_get(&pdev->dev);
|
|
if (IS_ERR(host->pinctrl)) {
|
|
ret = PTR_ERR(host->pinctrl);
|
|
dev_err(&pdev->dev, "Cannot find pinctrl!\n");
|
|
goto host_free;
|
|
}
|
|
|
|
host->pins_default = pinctrl_lookup_state(host->pinctrl, "default");
|
|
if (IS_ERR(host->pins_default)) {
|
|
ret = PTR_ERR(host->pins_default);
|
|
dev_err(&pdev->dev, "Cannot find pinctrl default!\n");
|
|
goto host_free;
|
|
}
|
|
|
|
host->pins_uhs = pinctrl_lookup_state(host->pinctrl, "state_uhs");
|
|
if (IS_ERR(host->pins_uhs)) {
|
|
ret = PTR_ERR(host->pins_uhs);
|
|
dev_err(&pdev->dev, "Cannot find pinctrl uhs!\n");
|
|
goto host_free;
|
|
}
|
|
|
|
msdc_of_property_parse(pdev, host);
|
|
|
|
host->dev = &pdev->dev;
|
|
host->mmc = mmc;
|
|
host->src_clk_freq = clk_get_rate(host->src_clk);
|
|
/* Set host parameters to mmc */
|
|
mmc->ops = &mt_msdc_ops;
|
|
mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
|
|
|
|
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
|
|
/* MMC core transfer sizes tunable parameters */
|
|
mmc->max_segs = MAX_BD_NUM;
|
|
mmc->max_seg_size = BDMA_DESC_BUFLEN;
|
|
mmc->max_blk_size = 2048;
|
|
mmc->max_req_size = 512 * 1024;
|
|
mmc->max_blk_count = mmc->max_req_size / 512;
|
|
host->dma_mask = DMA_BIT_MASK(32);
|
|
mmc_dev(mmc)->dma_mask = &host->dma_mask;
|
|
|
|
host->timeout_clks = 3 * 1048576;
|
|
host->dma.gpd = dma_alloc_coherent(&pdev->dev,
|
|
2 * sizeof(struct mt_gpdma_desc),
|
|
&host->dma.gpd_addr, GFP_KERNEL);
|
|
host->dma.bd = dma_alloc_coherent(&pdev->dev,
|
|
MAX_BD_NUM * sizeof(struct mt_bdma_desc),
|
|
&host->dma.bd_addr, GFP_KERNEL);
|
|
if (!host->dma.gpd || !host->dma.bd) {
|
|
ret = -ENOMEM;
|
|
goto release_mem;
|
|
}
|
|
msdc_init_gpd_bd(host, &host->dma);
|
|
INIT_DELAYED_WORK(&host->req_timeout, msdc_request_timeout);
|
|
spin_lock_init(&host->lock);
|
|
|
|
platform_set_drvdata(pdev, mmc);
|
|
msdc_ungate_clock(host);
|
|
msdc_init_hw(host);
|
|
|
|
ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT, pdev->name, host);
|
|
if (ret)
|
|
goto release;
|
|
|
|
pm_runtime_set_active(host->dev);
|
|
pm_runtime_set_autosuspend_delay(host->dev, MTK_MMC_AUTOSUSPEND_DELAY);
|
|
pm_runtime_use_autosuspend(host->dev);
|
|
pm_runtime_enable(host->dev);
|
|
ret = mmc_add_host(mmc);
|
|
|
|
if (ret)
|
|
goto end;
|
|
|
|
return 0;
|
|
end:
|
|
pm_runtime_disable(host->dev);
|
|
release:
|
|
platform_set_drvdata(pdev, NULL);
|
|
msdc_deinit_hw(host);
|
|
msdc_gate_clock(host);
|
|
release_mem:
|
|
if (host->dma.gpd)
|
|
dma_free_coherent(&pdev->dev,
|
|
2 * sizeof(struct mt_gpdma_desc),
|
|
host->dma.gpd, host->dma.gpd_addr);
|
|
if (host->dma.bd)
|
|
dma_free_coherent(&pdev->dev,
|
|
MAX_BD_NUM * sizeof(struct mt_bdma_desc),
|
|
host->dma.bd, host->dma.bd_addr);
|
|
host_free:
|
|
mmc_free_host(mmc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int msdc_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct msdc_host *host;
|
|
|
|
mmc = platform_get_drvdata(pdev);
|
|
host = mmc_priv(mmc);
|
|
|
|
pm_runtime_get_sync(host->dev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
mmc_remove_host(host->mmc);
|
|
msdc_deinit_hw(host);
|
|
msdc_gate_clock(host);
|
|
|
|
pm_runtime_disable(host->dev);
|
|
pm_runtime_put_noidle(host->dev);
|
|
dma_free_coherent(&pdev->dev,
|
|
2 * sizeof(struct mt_gpdma_desc),
|
|
host->dma.gpd, host->dma.gpd_addr);
|
|
dma_free_coherent(&pdev->dev, MAX_BD_NUM * sizeof(struct mt_bdma_desc),
|
|
host->dma.bd, host->dma.bd_addr);
|
|
|
|
mmc_free_host(host->mmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void msdc_save_reg(struct msdc_host *host)
|
|
{
|
|
host->save_para.msdc_cfg = readl(host->base + MSDC_CFG);
|
|
host->save_para.iocon = readl(host->base + MSDC_IOCON);
|
|
host->save_para.sdc_cfg = readl(host->base + SDC_CFG);
|
|
host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
|
|
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
|
|
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
|
|
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
|
|
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
|
|
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
|
|
}
|
|
|
|
static void msdc_restore_reg(struct msdc_host *host)
|
|
{
|
|
writel(host->save_para.msdc_cfg, host->base + MSDC_CFG);
|
|
writel(host->save_para.iocon, host->base + MSDC_IOCON);
|
|
writel(host->save_para.sdc_cfg, host->base + SDC_CFG);
|
|
writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE);
|
|
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
|
|
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
|
|
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
|
|
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
|
|
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
|
|
}
|
|
|
|
static int msdc_runtime_suspend(struct device *dev)
|
|
{
|
|
struct mmc_host *mmc = dev_get_drvdata(dev);
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
|
|
msdc_save_reg(host);
|
|
msdc_gate_clock(host);
|
|
return 0;
|
|
}
|
|
|
|
static int msdc_runtime_resume(struct device *dev)
|
|
{
|
|
struct mmc_host *mmc = dev_get_drvdata(dev);
|
|
struct msdc_host *host = mmc_priv(mmc);
|
|
|
|
msdc_ungate_clock(host);
|
|
msdc_restore_reg(host);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops msdc_dev_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
|
pm_runtime_force_resume)
|
|
SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct of_device_id msdc_of_ids[] = {
|
|
{ .compatible = "mediatek,mt8135-mmc", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, msdc_of_ids);
|
|
|
|
static struct platform_driver mt_msdc_driver = {
|
|
.probe = msdc_drv_probe,
|
|
.remove = msdc_drv_remove,
|
|
.driver = {
|
|
.name = "mtk-msdc",
|
|
.of_match_table = msdc_of_ids,
|
|
.pm = &msdc_dev_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mt_msdc_driver);
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MediaTek SD/MMC Card Driver");
|