1287 lines
30 KiB
C
1287 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Support for CompuLab EM-X270 platform
|
|
*
|
|
* Copyright (C) 2007, 2008 CompuLab, Ltd.
|
|
* Author: Mike Rapoport <mike@compulab.co.il>
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/dm9000.h>
|
|
#include <linux/platform_data/rtc-v3020.h>
|
|
#include <linux/mtd/platnand.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/input.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/mfd/da903x.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/tdo24m.h>
|
|
#include <linux/spi/libertas_spi.h>
|
|
#include <linux/spi/pxa2xx_spi.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/apm-emulation.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_data/pca953x.h>
|
|
#include <linux/platform_data/i2c-pxa.h>
|
|
#include <linux/regulator/userspace-consumer.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include "pxa27x.h"
|
|
#include "pxa27x-udc.h"
|
|
#include <mach/audio.h>
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/keypad-pxa27x.h>
|
|
#include <linux/platform_data/media/camera-pxa.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
/* EM-X270 specific GPIOs */
|
|
#define GPIO13_MMC_CD (13)
|
|
#define GPIO95_MMC_WP (95)
|
|
#define GPIO56_NAND_RB (56)
|
|
#define GPIO93_CAM_RESET (93)
|
|
#define GPIO16_USB_HUB_RESET (16)
|
|
|
|
/* eXeda specific GPIOs */
|
|
#define GPIO114_MMC_CD (114)
|
|
#define GPIO20_NAND_RB (20)
|
|
#define GPIO38_SD_PWEN (38)
|
|
#define GPIO37_WLAN_RST (37)
|
|
#define GPIO95_TOUCHPAD_INT (95)
|
|
#define GPIO130_CAM_RESET (130)
|
|
#define GPIO10_USB_HUB_RESET (10)
|
|
|
|
/* common GPIOs */
|
|
#define GPIO11_NAND_CS (11)
|
|
#define GPIO41_ETHIRQ (41)
|
|
#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
|
|
#define GPIO115_WLAN_PWEN (115)
|
|
#define GPIO19_WLAN_STRAP (19)
|
|
#define GPIO9_USB_VBUS_EN (9)
|
|
|
|
static int mmc_cd;
|
|
static int nand_rb;
|
|
static int dm9000_flags;
|
|
static int cam_reset;
|
|
static int usb_hub_reset;
|
|
|
|
static unsigned long common_pin_config[] = {
|
|
/* AC'97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO98_AC97_SYSCLK,
|
|
GPIO113_AC97_nRESET,
|
|
|
|
/* BTUART */
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
/* STUART */
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
/* MCI controller */
|
|
GPIO32_MMC_CLK,
|
|
GPIO112_MMC_CMD,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
|
|
/* LCD */
|
|
GPIOxx_LCD_TFT_16BPP,
|
|
|
|
/* QCI */
|
|
GPIO84_CIF_FV,
|
|
GPIO25_CIF_LV,
|
|
GPIO53_CIF_MCLK,
|
|
GPIO54_CIF_PCLK,
|
|
GPIO81_CIF_DD_0,
|
|
GPIO55_CIF_DD_1,
|
|
GPIO51_CIF_DD_2,
|
|
GPIO50_CIF_DD_3,
|
|
GPIO52_CIF_DD_4,
|
|
GPIO48_CIF_DD_5,
|
|
GPIO17_CIF_DD_6,
|
|
GPIO12_CIF_DD_7,
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
|
|
/* Keypad */
|
|
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO103_KP_MKOUT_0,
|
|
GPIO104_KP_MKOUT_1,
|
|
GPIO105_KP_MKOUT_2,
|
|
GPIO106_KP_MKOUT_3,
|
|
GPIO107_KP_MKOUT_4,
|
|
GPIO108_KP_MKOUT_5,
|
|
GPIO96_KP_MKOUT_6,
|
|
GPIO22_KP_MKOUT_7,
|
|
|
|
/* SSP1 */
|
|
GPIO26_SSP1_RXD,
|
|
GPIO23_SSP1_SCLK,
|
|
GPIO24_SSP1_SFRM,
|
|
GPIO57_SSP1_TXD,
|
|
|
|
/* SSP2 */
|
|
GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
|
|
GPIO14_GPIO,
|
|
GPIO89_SSP2_TXD,
|
|
GPIO88_SSP2_RXD,
|
|
|
|
/* SDRAM and local bus */
|
|
GPIO15_nCS_1,
|
|
GPIO78_nCS_2,
|
|
GPIO79_nCS_3,
|
|
GPIO80_nCS_4,
|
|
GPIO49_nPWE,
|
|
GPIO18_RDY,
|
|
|
|
/* GPIO */
|
|
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */
|
|
|
|
/* power controls */
|
|
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
|
|
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
|
|
|
|
/* NAND controls */
|
|
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
|
|
|
|
/* interrupts */
|
|
GPIO41_GPIO, /* DM9000 interrupt */
|
|
};
|
|
|
|
static unsigned long em_x270_pin_config[] = {
|
|
GPIO13_GPIO, /* MMC card detect */
|
|
GPIO16_GPIO, /* USB hub reset */
|
|
GPIO56_GPIO, /* NAND Ready/Busy */
|
|
GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
|
|
GPIO95_GPIO, /* MMC Write protect */
|
|
};
|
|
|
|
static unsigned long exeda_pin_config[] = {
|
|
GPIO10_GPIO, /* USB hub reset */
|
|
GPIO20_GPIO, /* NAND Ready/Busy */
|
|
GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
|
|
GPIO95_GPIO, /* touchpad IRQ */
|
|
GPIO114_GPIO, /* MMC card detect */
|
|
};
|
|
|
|
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
|
|
static struct resource em_x270_dm9000_resource[] = {
|
|
[0] = {
|
|
.start = PXA_CS2_PHYS,
|
|
.end = PXA_CS2_PHYS + 3,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = PXA_CS2_PHYS + 8,
|
|
.end = PXA_CS2_PHYS + 8 + 0x3f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = EM_X270_ETHIRQ,
|
|
.end = EM_X270_ETHIRQ,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct dm9000_plat_data em_x270_dm9000_platdata = {
|
|
.flags = DM9000_PLATF_NO_EEPROM,
|
|
};
|
|
|
|
static struct platform_device em_x270_dm9000 = {
|
|
.name = "dm9000",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
|
|
.resource = em_x270_dm9000_resource,
|
|
.dev = {
|
|
.platform_data = &em_x270_dm9000_platdata,
|
|
}
|
|
};
|
|
|
|
static void __init em_x270_init_dm9000(void)
|
|
{
|
|
em_x270_dm9000_platdata.flags |= dm9000_flags;
|
|
platform_device_register(&em_x270_dm9000);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_dm9000(void) {}
|
|
#endif
|
|
|
|
/* V3020 RTC */
|
|
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
|
|
static struct resource em_x270_v3020_resource[] = {
|
|
[0] = {
|
|
.start = PXA_CS4_PHYS,
|
|
.end = PXA_CS4_PHYS + 3,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct v3020_platform_data em_x270_v3020_platdata = {
|
|
.leftshift = 0,
|
|
};
|
|
|
|
static struct platform_device em_x270_rtc = {
|
|
.name = "v3020",
|
|
.num_resources = ARRAY_SIZE(em_x270_v3020_resource),
|
|
.resource = em_x270_v3020_resource,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &em_x270_v3020_platdata,
|
|
}
|
|
};
|
|
|
|
static void __init em_x270_init_rtc(void)
|
|
{
|
|
platform_device_register(&em_x270_rtc);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_rtc(void) {}
|
|
#endif
|
|
|
|
/* NAND flash */
|
|
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
static inline void nand_cs_on(void)
|
|
{
|
|
gpio_set_value(GPIO11_NAND_CS, 0);
|
|
}
|
|
|
|
static void nand_cs_off(void)
|
|
{
|
|
dsb();
|
|
|
|
gpio_set_value(GPIO11_NAND_CS, 1);
|
|
}
|
|
|
|
/* hardware specific access to control-lines */
|
|
static void em_x270_nand_cmd_ctl(struct nand_chip *this, int dat,
|
|
unsigned int ctrl)
|
|
{
|
|
unsigned long nandaddr = (unsigned long)this->legacy.IO_ADDR_W;
|
|
|
|
dsb();
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
if (ctrl & NAND_ALE)
|
|
nandaddr |= (1 << 3);
|
|
else
|
|
nandaddr &= ~(1 << 3);
|
|
if (ctrl & NAND_CLE)
|
|
nandaddr |= (1 << 2);
|
|
else
|
|
nandaddr &= ~(1 << 2);
|
|
if (ctrl & NAND_NCE)
|
|
nand_cs_on();
|
|
else
|
|
nand_cs_off();
|
|
}
|
|
|
|
dsb();
|
|
this->legacy.IO_ADDR_W = (void __iomem *)nandaddr;
|
|
if (dat != NAND_CMD_NONE)
|
|
writel(dat, this->legacy.IO_ADDR_W);
|
|
|
|
dsb();
|
|
}
|
|
|
|
/* read device ready pin */
|
|
static int em_x270_nand_device_ready(struct nand_chip *this)
|
|
{
|
|
dsb();
|
|
|
|
return gpio_get_value(nand_rb);
|
|
}
|
|
|
|
static struct mtd_partition em_x270_partition_info[] = {
|
|
[0] = {
|
|
.name = "em_x270-0",
|
|
.offset = 0,
|
|
.size = SZ_4M,
|
|
},
|
|
[1] = {
|
|
.name = "em_x270-1",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL
|
|
},
|
|
};
|
|
|
|
struct platform_nand_data em_x270_nand_platdata = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.chip_offset = 0,
|
|
.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
|
|
.partitions = em_x270_partition_info,
|
|
.chip_delay = 20,
|
|
},
|
|
.ctrl = {
|
|
.dev_ready = em_x270_nand_device_ready,
|
|
.select_chip = 0,
|
|
.cmd_ctrl = em_x270_nand_cmd_ctl,
|
|
},
|
|
};
|
|
|
|
static struct resource em_x270_nand_resource[] = {
|
|
[0] = {
|
|
.start = PXA_CS1_PHYS,
|
|
.end = PXA_CS1_PHYS + 12,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device em_x270_nand = {
|
|
.name = "gen_nand",
|
|
.num_resources = ARRAY_SIZE(em_x270_nand_resource),
|
|
.resource = em_x270_nand_resource,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &em_x270_nand_platdata,
|
|
}
|
|
};
|
|
|
|
static void __init em_x270_init_nand(void)
|
|
{
|
|
int err;
|
|
|
|
err = gpio_request(GPIO11_NAND_CS, "NAND CS");
|
|
if (err) {
|
|
pr_warn("EM-X270: failed to request NAND CS gpio\n");
|
|
return;
|
|
}
|
|
|
|
gpio_direction_output(GPIO11_NAND_CS, 1);
|
|
|
|
err = gpio_request(nand_rb, "NAND R/B");
|
|
if (err) {
|
|
pr_warn("EM-X270: failed to request NAND R/B gpio\n");
|
|
gpio_free(GPIO11_NAND_CS);
|
|
return;
|
|
}
|
|
|
|
gpio_direction_input(nand_rb);
|
|
|
|
platform_device_register(&em_x270_nand);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_nand(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
|
|
static struct mtd_partition em_x270_nor_parts[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.offset = 0x00000000,
|
|
.size = 0x00050000,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
}, {
|
|
.name = "Environment",
|
|
.offset = 0x00050000,
|
|
.size = 0x00010000,
|
|
}, {
|
|
.name = "Reserved",
|
|
.offset = 0x00060000,
|
|
.size = 0x00050000,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
}, {
|
|
.name = "Splashscreen",
|
|
.offset = 0x000b0000,
|
|
.size = 0x00050000,
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data em_x270_nor_data[] = {
|
|
[0] = {
|
|
.width = 2,
|
|
.parts = em_x270_nor_parts,
|
|
.nr_parts = ARRAY_SIZE(em_x270_nor_parts),
|
|
},
|
|
};
|
|
|
|
static struct resource em_x270_nor_flash_resource = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_1M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device em_x270_physmap_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.num_resources = 1,
|
|
.resource = &em_x270_nor_flash_resource,
|
|
.dev = {
|
|
.platform_data = &em_x270_nor_data,
|
|
},
|
|
};
|
|
|
|
static void __init em_x270_init_nor(void)
|
|
{
|
|
platform_device_register(&em_x270_physmap_flash);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_nor(void) {}
|
|
#endif
|
|
|
|
/* PXA27x OHCI controller setup */
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
static struct regulator *em_x270_usb_ldo;
|
|
|
|
static int em_x270_usb_hub_init(void)
|
|
{
|
|
int err;
|
|
|
|
em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
|
|
if (IS_ERR(em_x270_usb_ldo))
|
|
return PTR_ERR(em_x270_usb_ldo);
|
|
|
|
err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
|
|
if (err)
|
|
goto err_free_usb_ldo;
|
|
|
|
err = gpio_request(usb_hub_reset, "hub rst");
|
|
if (err)
|
|
goto err_free_vbus_gpio;
|
|
|
|
/* USB Hub power-on and reset */
|
|
gpio_direction_output(usb_hub_reset, 1);
|
|
gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
|
|
err = regulator_enable(em_x270_usb_ldo);
|
|
if (err)
|
|
goto err_free_rst_gpio;
|
|
|
|
gpio_set_value(usb_hub_reset, 0);
|
|
gpio_set_value(usb_hub_reset, 1);
|
|
regulator_disable(em_x270_usb_ldo);
|
|
err = regulator_enable(em_x270_usb_ldo);
|
|
if (err)
|
|
goto err_free_rst_gpio;
|
|
|
|
gpio_set_value(usb_hub_reset, 0);
|
|
gpio_set_value(GPIO9_USB_VBUS_EN, 1);
|
|
|
|
return 0;
|
|
|
|
err_free_rst_gpio:
|
|
gpio_free(usb_hub_reset);
|
|
err_free_vbus_gpio:
|
|
gpio_free(GPIO9_USB_VBUS_EN);
|
|
err_free_usb_ldo:
|
|
regulator_put(em_x270_usb_ldo);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int em_x270_ohci_init(struct device *dev)
|
|
{
|
|
int err;
|
|
|
|
/* we don't want to entirely disable USB if the HUB init failed */
|
|
err = em_x270_usb_hub_init();
|
|
if (err)
|
|
pr_err("USB Hub initialization failed: %d\n", err);
|
|
|
|
/* enable port 2 transiever */
|
|
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void em_x270_ohci_exit(struct device *dev)
|
|
{
|
|
gpio_free(usb_hub_reset);
|
|
gpio_free(GPIO9_USB_VBUS_EN);
|
|
|
|
if (!IS_ERR(em_x270_usb_ldo)) {
|
|
if (regulator_is_enabled(em_x270_usb_ldo))
|
|
regulator_disable(em_x270_usb_ldo);
|
|
|
|
regulator_put(em_x270_usb_ldo);
|
|
}
|
|
}
|
|
|
|
static struct pxaohci_platform_data em_x270_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
|
|
.init = em_x270_ohci_init,
|
|
.exit = em_x270_ohci_exit,
|
|
};
|
|
|
|
static void __init em_x270_init_ohci(void)
|
|
{
|
|
pxa_set_ohci_info(&em_x270_ohci_platform_data);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_ohci(void) {}
|
|
#endif
|
|
|
|
/* MCI controller setup */
|
|
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
|
|
static struct regulator *em_x270_sdio_ldo;
|
|
|
|
static struct gpiod_lookup_table em_x270_mci_wp_gpio_table = {
|
|
.dev_id = "pxa2xx-mci.0",
|
|
.table = {
|
|
/* Write protect on GPIO 95 */
|
|
GPIO_LOOKUP("gpio-pxa", GPIO95_MMC_WP, "wp", GPIO_ACTIVE_LOW),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static int em_x270_mci_init(struct device *dev,
|
|
irq_handler_t em_x270_detect_int,
|
|
void *data)
|
|
{
|
|
int err;
|
|
|
|
em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
|
|
if (IS_ERR(em_x270_sdio_ldo)) {
|
|
dev_err(dev, "can't request SDIO power supply: %ld\n",
|
|
PTR_ERR(em_x270_sdio_ldo));
|
|
return PTR_ERR(em_x270_sdio_ldo);
|
|
}
|
|
|
|
err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
"MMC card detect", data);
|
|
if (err) {
|
|
dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
|
|
goto err_irq;
|
|
}
|
|
|
|
if (!machine_is_em_x270()) {
|
|
err = gpio_request(GPIO38_SD_PWEN, "sdio power");
|
|
if (err) {
|
|
dev_err(dev, "can't request MMC power control : %d\n",
|
|
err);
|
|
goto err_gpio_wp;
|
|
}
|
|
gpio_direction_output(GPIO38_SD_PWEN, 1);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_gpio_wp:
|
|
free_irq(gpio_to_irq(mmc_cd), data);
|
|
err_irq:
|
|
regulator_put(em_x270_sdio_ldo);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
struct pxamci_platform_data* p_d = dev->platform_data;
|
|
|
|
if ((1 << vdd) & p_d->ocr_mask) {
|
|
int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
|
|
|
|
regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
|
|
return regulator_enable(em_x270_sdio_ldo);
|
|
} else {
|
|
regulator_disable(em_x270_sdio_ldo);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void em_x270_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(gpio_to_irq(mmc_cd), data);
|
|
regulator_put(em_x270_sdio_ldo);
|
|
|
|
if (!machine_is_em_x270())
|
|
gpio_free(GPIO38_SD_PWEN);
|
|
}
|
|
|
|
static struct pxamci_platform_data em_x270_mci_platform_data = {
|
|
.detect_delay_ms = 250,
|
|
.ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
|
|
MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
|
|
MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
|
|
MMC_VDD_30_31|MMC_VDD_31_32,
|
|
.init = em_x270_mci_init,
|
|
.setpower = em_x270_mci_setpower,
|
|
.exit = em_x270_mci_exit,
|
|
};
|
|
|
|
static void __init em_x270_init_mmc(void)
|
|
{
|
|
if (machine_is_em_x270())
|
|
gpiod_add_lookup_table(&em_x270_mci_wp_gpio_table);
|
|
|
|
pxa_set_mci_info(&em_x270_mci_platform_data);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_mmc(void) {}
|
|
#endif
|
|
|
|
/* LCD */
|
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
|
static struct pxafb_mode_info em_x270_lcd_modes[] = {
|
|
[0] = {
|
|
.pixclock = 38250,
|
|
.bpp = 16,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.hsync_len = 8,
|
|
.vsync_len = 2,
|
|
.left_margin = 8,
|
|
.upper_margin = 2,
|
|
.right_margin = 24,
|
|
.lower_margin = 4,
|
|
.sync = 0,
|
|
},
|
|
[1] = {
|
|
.pixclock = 153800,
|
|
.bpp = 16,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.hsync_len = 8,
|
|
.vsync_len = 2,
|
|
.left_margin = 8,
|
|
.upper_margin = 2,
|
|
.right_margin = 88,
|
|
.lower_margin = 2,
|
|
.sync = 0,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info em_x270_lcd = {
|
|
.modes = em_x270_lcd_modes,
|
|
.num_modes = 2,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP,
|
|
};
|
|
|
|
static void __init em_x270_init_lcd(void)
|
|
{
|
|
pxa_set_fb_info(NULL, &em_x270_lcd);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_lcd(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
|
|
static struct pxa2xx_spi_controller em_x270_spi_info = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
|
|
.rx_threshold = 1,
|
|
.tx_threshold = 1,
|
|
.gpio_cs = -1,
|
|
};
|
|
|
|
static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
|
|
.model = TDO35S,
|
|
};
|
|
|
|
static struct pxa2xx_spi_controller em_x270_spi_2_info = {
|
|
.num_chipselect = 1,
|
|
.enable_dma = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_chip em_x270_libertas_chip = {
|
|
.rx_threshold = 1,
|
|
.tx_threshold = 1,
|
|
.timeout = 1000,
|
|
.gpio_cs = 14,
|
|
};
|
|
|
|
static unsigned long em_x270_libertas_pin_config[] = {
|
|
/* SSP2 */
|
|
GPIO19_SSP2_SCLK,
|
|
GPIO14_GPIO,
|
|
GPIO89_SSP2_TXD,
|
|
GPIO88_SSP2_RXD,
|
|
};
|
|
|
|
static int em_x270_libertas_setup(struct spi_device *spi)
|
|
{
|
|
int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
|
|
if (err)
|
|
return err;
|
|
|
|
err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
|
|
if (err)
|
|
goto err_free_pwen;
|
|
|
|
if (machine_is_exeda()) {
|
|
err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
|
|
if (err)
|
|
goto err_free_strap;
|
|
|
|
gpio_direction_output(GPIO37_WLAN_RST, 1);
|
|
msleep(100);
|
|
}
|
|
|
|
gpio_direction_output(GPIO19_WLAN_STRAP, 1);
|
|
msleep(100);
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
|
|
|
|
gpio_direction_output(GPIO115_WLAN_PWEN, 0);
|
|
msleep(100);
|
|
gpio_set_value(GPIO115_WLAN_PWEN, 1);
|
|
msleep(100);
|
|
|
|
spi->bits_per_word = 16;
|
|
spi_setup(spi);
|
|
|
|
return 0;
|
|
|
|
err_free_strap:
|
|
gpio_free(GPIO19_WLAN_STRAP);
|
|
err_free_pwen:
|
|
gpio_free(GPIO115_WLAN_PWEN);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int em_x270_libertas_teardown(struct spi_device *spi)
|
|
{
|
|
gpio_set_value(GPIO115_WLAN_PWEN, 0);
|
|
gpio_free(GPIO115_WLAN_PWEN);
|
|
gpio_free(GPIO19_WLAN_STRAP);
|
|
|
|
if (machine_is_exeda()) {
|
|
gpio_set_value(GPIO37_WLAN_RST, 0);
|
|
gpio_free(GPIO37_WLAN_RST);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct libertas_spi_platform_data em_x270_libertas_pdata = {
|
|
.use_dummy_writes = 1,
|
|
.setup = em_x270_libertas_setup,
|
|
.teardown = em_x270_libertas_teardown,
|
|
};
|
|
|
|
static struct spi_board_info em_x270_spi_devices[] __initdata = {
|
|
{
|
|
.modalias = "tdo24m",
|
|
.max_speed_hz = 1000000,
|
|
.bus_num = 1,
|
|
.chip_select = 0,
|
|
.controller_data = &em_x270_tdo24m_chip,
|
|
.platform_data = &em_x270_tdo24m_pdata,
|
|
},
|
|
{
|
|
.modalias = "libertas_spi",
|
|
.max_speed_hz = 13000000,
|
|
.bus_num = 2,
|
|
.irq = PXA_GPIO_TO_IRQ(116),
|
|
.chip_select = 0,
|
|
.controller_data = &em_x270_libertas_chip,
|
|
.platform_data = &em_x270_libertas_pdata,
|
|
},
|
|
};
|
|
|
|
static void __init em_x270_init_spi(void)
|
|
{
|
|
pxa2xx_set_spi_info(1, &em_x270_spi_info);
|
|
pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
|
|
spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
|
|
}
|
|
#else
|
|
static inline void em_x270_init_spi(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
|
|
static pxa2xx_audio_ops_t em_x270_ac97_info = {
|
|
.reset_gpio = 113,
|
|
};
|
|
|
|
static void __init em_x270_init_ac97(void)
|
|
{
|
|
pxa_set_ac97_info(&em_x270_ac97_info);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_ac97(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
|
|
static const unsigned int em_x270_module_matrix_keys[] = {
|
|
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
|
|
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
|
|
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
|
|
};
|
|
|
|
static struct matrix_keymap_data em_x270_matrix_keymap_data = {
|
|
.keymap = em_x270_module_matrix_keys,
|
|
.keymap_size = ARRAY_SIZE(em_x270_module_matrix_keys),
|
|
};
|
|
|
|
struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
|
|
/* code map for the matrix keys */
|
|
.matrix_key_rows = 3,
|
|
.matrix_key_cols = 3,
|
|
.matrix_keymap_data = &em_x270_matrix_keymap_data,
|
|
};
|
|
|
|
static const unsigned int em_x270_exeda_matrix_keys[] = {
|
|
KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
|
|
KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
|
|
KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
|
|
KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
|
|
|
|
KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
|
|
KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
|
|
KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
|
|
KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
|
|
|
|
KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
|
|
KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
|
|
KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
|
|
KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
|
|
|
|
KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
|
|
KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
|
|
KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
|
|
KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
|
|
|
|
KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
|
|
KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
|
|
KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
|
|
KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
|
|
|
|
KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
|
|
KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
|
|
KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
|
|
KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
|
|
|
|
KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
|
|
KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
|
|
KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
|
|
KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
|
|
|
|
KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
|
|
KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
|
|
KEY(7, 4, 0), KEY(7, 5, 0),
|
|
KEY(7, 6, 0), KEY(7, 7, 0),
|
|
};
|
|
|
|
static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = {
|
|
.keymap = em_x270_exeda_matrix_keys,
|
|
.keymap_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
|
|
};
|
|
|
|
struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
|
|
/* code map for the matrix keys */
|
|
.matrix_key_rows = 8,
|
|
.matrix_key_cols = 8,
|
|
.matrix_keymap_data = &em_x270_exeda_matrix_keymap_data,
|
|
};
|
|
|
|
static void __init em_x270_init_keypad(void)
|
|
{
|
|
if (machine_is_em_x270())
|
|
pxa_set_keypad_info(&em_x270_module_keypad_info);
|
|
else
|
|
pxa_set_keypad_info(&em_x270_exeda_keypad_info);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_keypad(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
static struct gpio_keys_button gpio_keys_button[] = {
|
|
[0] = {
|
|
.desc = "sleep/wakeup",
|
|
.code = KEY_SUSPEND,
|
|
.type = EV_PWR,
|
|
.gpio = 1,
|
|
.wakeup = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
|
|
.buttons = gpio_keys_button,
|
|
.nbuttons = 1,
|
|
};
|
|
|
|
static struct platform_device em_x270_gpio_keys = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &em_x270_gpio_keys_data,
|
|
},
|
|
};
|
|
|
|
static void __init em_x270_init_gpio_keys(void)
|
|
{
|
|
platform_device_register(&em_x270_gpio_keys);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_gpio_keys(void) {}
|
|
#endif
|
|
|
|
/* Quick Capture Interface and sensor setup */
|
|
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
|
|
static int em_x270_sensor_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpio_request(cam_reset, "camera reset");
|
|
if (ret)
|
|
return ret;
|
|
|
|
gpio_direction_output(cam_reset, 0);
|
|
gpio_set_value(cam_reset, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct regulator_consumer_supply camera_dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vdd", "0-005d"),
|
|
};
|
|
|
|
static struct regulator_init_data camera_dummy_initdata = {
|
|
.consumer_supplies = camera_dummy_supplies,
|
|
.num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct fixed_voltage_config camera_dummy_config = {
|
|
.supply_name = "camera_vdd",
|
|
.input_supply = "vcc cam",
|
|
.microvolts = 2800000,
|
|
.init_data = &camera_dummy_initdata,
|
|
};
|
|
|
|
static struct platform_device camera_supply_dummy_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &camera_dummy_config,
|
|
},
|
|
};
|
|
|
|
struct pxacamera_platform_data em_x270_camera_platform_data = {
|
|
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
|
|
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
|
|
.mclk_10khz = 2600,
|
|
.sensor_i2c_adapter_id = 0,
|
|
.sensor_i2c_address = 0x5d,
|
|
};
|
|
|
|
static void __init em_x270_init_camera(void)
|
|
{
|
|
if (em_x270_sensor_init() == 0)
|
|
pxa_set_camera_info(&em_x270_camera_platform_data);
|
|
platform_device_register(&camera_supply_dummy_device);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_camera(void) {}
|
|
#endif
|
|
|
|
static struct regulator_bulk_data em_x270_gps_consumer_supply = {
|
|
.supply = "vcc gps",
|
|
};
|
|
|
|
static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
|
|
.name = "vcc gps",
|
|
.num_supplies = 1,
|
|
.supplies = &em_x270_gps_consumer_supply,
|
|
};
|
|
|
|
static struct platform_device em_x270_gps_userspace_consumer = {
|
|
.name = "reg-userspace-consumer",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &em_x270_gps_consumer_data,
|
|
},
|
|
};
|
|
|
|
static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
|
|
.supply = "vcc gprs",
|
|
};
|
|
|
|
static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
|
|
.name = "vcc gprs",
|
|
.num_supplies = 1,
|
|
.supplies = &em_x270_gprs_consumer_supply
|
|
};
|
|
|
|
static struct platform_device em_x270_gprs_userspace_consumer = {
|
|
.name = "reg-userspace-consumer",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &em_x270_gprs_consumer_data,
|
|
}
|
|
};
|
|
|
|
static struct platform_device *em_x270_userspace_consumers[] = {
|
|
&em_x270_gps_userspace_consumer,
|
|
&em_x270_gprs_userspace_consumer,
|
|
};
|
|
|
|
static void __init em_x270_userspace_consumers_init(void)
|
|
{
|
|
platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
|
|
}
|
|
|
|
/* DA9030 related initializations */
|
|
#define REGULATOR_CONSUMER(_name, _dev_name, _supply) \
|
|
static struct regulator_consumer_supply _name##_consumers[] = { \
|
|
REGULATOR_SUPPLY(_supply, _dev_name), \
|
|
}
|
|
|
|
REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
|
|
REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
|
|
REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio");
|
|
REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
|
|
REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs");
|
|
REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
|
|
|
|
#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
|
|
static struct regulator_init_data _ldo##_data = { \
|
|
.constraints = { \
|
|
.min_uV = _min_uV, \
|
|
.max_uV = _max_uV, \
|
|
.state_mem = { \
|
|
.enabled = 0, \
|
|
}, \
|
|
.valid_ops_mask = _ops_mask, \
|
|
.apply_uV = 1, \
|
|
}, \
|
|
.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
|
|
.consumer_supplies = _ldo##_consumers, \
|
|
};
|
|
|
|
REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
|
|
REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
|
|
REGULATOR_INIT(ldo10, 2000000, 3200000,
|
|
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
|
|
REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
|
|
REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
|
|
REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
|
|
|
|
struct led_info em_x270_led_info = {
|
|
.name = "em-x270:orange",
|
|
.default_trigger = "battery-charging-or-full",
|
|
};
|
|
|
|
struct power_supply_info em_x270_psy_info = {
|
|
.name = "battery",
|
|
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
|
|
.voltage_max_design = 4200000,
|
|
.voltage_min_design = 3000000,
|
|
.use_for_apm = 1,
|
|
};
|
|
|
|
static void em_x270_battery_low(void)
|
|
{
|
|
#if defined(CONFIG_APM_EMULATION)
|
|
apm_queue_event(APM_LOW_BATTERY);
|
|
#endif
|
|
}
|
|
|
|
static void em_x270_battery_critical(void)
|
|
{
|
|
#if defined(CONFIG_APM_EMULATION)
|
|
apm_queue_event(APM_CRITICAL_SUSPEND);
|
|
#endif
|
|
}
|
|
|
|
struct da9030_battery_info em_x270_batterty_info = {
|
|
.battery_info = &em_x270_psy_info,
|
|
|
|
.charge_milliamp = 1000,
|
|
.charge_millivolt = 4200,
|
|
|
|
.vbat_low = 3600,
|
|
.vbat_crit = 3400,
|
|
.vbat_charge_start = 4100,
|
|
.vbat_charge_stop = 4200,
|
|
.vbat_charge_restart = 4000,
|
|
|
|
.vcharge_min = 3200,
|
|
.vcharge_max = 5500,
|
|
|
|
.tbat_low = 197,
|
|
.tbat_high = 78,
|
|
.tbat_restart = 100,
|
|
|
|
.batmon_interval = 0,
|
|
|
|
.battery_low = em_x270_battery_low,
|
|
.battery_critical = em_x270_battery_critical,
|
|
};
|
|
|
|
#define DA9030_SUBDEV(_name, _id, _pdata) \
|
|
{ \
|
|
.name = "da903x-" #_name, \
|
|
.id = DA9030_ID_##_id, \
|
|
.platform_data = _pdata, \
|
|
}
|
|
|
|
#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
|
|
|
|
struct da903x_subdev_info em_x270_da9030_subdevs[] = {
|
|
DA9030_LDO(3),
|
|
DA9030_LDO(5),
|
|
DA9030_LDO(10),
|
|
DA9030_LDO(12),
|
|
DA9030_LDO(19),
|
|
|
|
DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
|
|
|
|
DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
|
|
DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
|
|
DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
|
|
};
|
|
|
|
static struct da903x_platform_data em_x270_da9030_info = {
|
|
.num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
|
|
.subdevs = em_x270_da9030_subdevs,
|
|
};
|
|
|
|
static struct i2c_board_info em_x270_i2c_pmic_info = {
|
|
I2C_BOARD_INFO("da9030", 0x49),
|
|
.irq = PXA_GPIO_TO_IRQ(0),
|
|
.platform_data = &em_x270_da9030_info,
|
|
};
|
|
|
|
static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
|
|
.use_pio = 1,
|
|
};
|
|
|
|
static void __init em_x270_init_da9030(void)
|
|
{
|
|
pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
|
|
i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
|
|
}
|
|
|
|
static struct pca953x_platform_data exeda_gpio_ext_pdata = {
|
|
.gpio_base = 128,
|
|
};
|
|
|
|
static struct i2c_board_info exeda_i2c_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("pca9555", 0x21),
|
|
.platform_data = &exeda_gpio_ext_pdata,
|
|
},
|
|
};
|
|
|
|
static struct i2c_pxa_platform_data em_x270_i2c_info = {
|
|
.fast_mode = 1,
|
|
};
|
|
|
|
static void __init em_x270_init_i2c(void)
|
|
{
|
|
pxa_set_i2c_info(&em_x270_i2c_info);
|
|
|
|
if (machine_is_exeda())
|
|
i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
|
|
}
|
|
|
|
static void __init em_x270_module_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
|
|
|
|
mmc_cd = GPIO13_MMC_CD;
|
|
nand_rb = GPIO56_NAND_RB;
|
|
dm9000_flags = DM9000_PLATF_32BITONLY;
|
|
cam_reset = GPIO93_CAM_RESET;
|
|
usb_hub_reset = GPIO16_USB_HUB_RESET;
|
|
}
|
|
|
|
static void __init em_x270_exeda_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
|
|
|
|
mmc_cd = GPIO114_MMC_CD;
|
|
nand_rb = GPIO20_NAND_RB;
|
|
dm9000_flags = DM9000_PLATF_16BITONLY;
|
|
cam_reset = GPIO130_CAM_RESET;
|
|
usb_hub_reset = GPIO10_USB_HUB_RESET;
|
|
}
|
|
|
|
static void __init em_x270_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
#ifdef CONFIG_PM
|
|
pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
|
|
#endif
|
|
|
|
if (machine_is_em_x270())
|
|
em_x270_module_init();
|
|
else if (machine_is_exeda())
|
|
em_x270_exeda_init();
|
|
else
|
|
panic("Unsupported machine: %d\n", machine_arch_type);
|
|
|
|
em_x270_init_da9030();
|
|
em_x270_init_dm9000();
|
|
em_x270_init_rtc();
|
|
em_x270_init_nand();
|
|
em_x270_init_nor();
|
|
em_x270_init_lcd();
|
|
em_x270_init_mmc();
|
|
em_x270_init_ohci();
|
|
em_x270_init_keypad();
|
|
em_x270_init_gpio_keys();
|
|
em_x270_init_ac97();
|
|
em_x270_init_spi();
|
|
em_x270_init_i2c();
|
|
em_x270_init_camera();
|
|
em_x270_userspace_consumers_init();
|
|
|
|
regulator_has_full_constraints();
|
|
}
|
|
|
|
MACHINE_START(EM_X270, "Compulab EM-X270")
|
|
.atag_offset = 0x100,
|
|
.map_io = pxa27x_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa27x_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = em_x270_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|
|
|
|
MACHINE_START(EXEDA, "Compulab eXeda")
|
|
.atag_offset = 0x100,
|
|
.map_io = pxa27x_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa27x_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = em_x270_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|