p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
linux_old1/arch/arm/mach-omap2
History
Paul Walmsley 19c1c0ce9d OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain 
The parent of the interface clocks for GPTIMER1, MPU_WDT,
SYNCTIMER_32K, SCM, WDT1, and the ICR (2430 only) were all listed as
being l4_ck.  This isn't accurate; these modules exist inside the WKUP
domain, and the interface clock to these modules runs at the SYS_CLK
rate rather than the CORE L4 rate.

So, create a new clock "wu_l4_ick", similar to the OMAP3
"wkup_l4_ick", that serves as the parent for these clocks.

Also, these clocks were listed as existing inside core_l4_clkdm;
wkup_clkdm is probably more accurate.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
 		2011-03-07 20:19:39 -07:00
..
include/mach TI816X: Add low level debug support 2011-02-16 08:31:53 -08:00
Kconfig Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
Makefile OMAP2+: clock: add interface clock type code with autoidle support 2011-03-07 20:02:30 -07:00
Makefile.boot
…
board-2430sdp.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-3430sdp.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-3630sdp.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-4430sdp.c Merge branch 'for-tony' of git://gitorious.org/usb/usb into omap-for-linus 2011-02-22 10:54:12 -08:00
board-am3517crane.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-am3517evm.c Merge branch 'for-tony' of git://gitorious.org/usb/usb into omap-for-linus 2011-02-22 10:54:12 -08:00
board-apollon.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-cm-t35.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-cm-t3517.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-devkit8000.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-flash.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-flash.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-generic.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-h4.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-igep0020.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-igep0030.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-ldp.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-n8x0.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3beagle.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3evm.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3logic.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3pandora.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3stalker.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3touchbook.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap4panda.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-overo.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-rm680.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-rx51-peripherals.c omap: rx51: Add vdda_dac supply for tvout 2010-12-22 11:06:24 -08:00
board-rx51-video.c omap: rx51: Remove tvout code that plays with gpio 40 2010-12-22 11:06:24 -08:00
board-rx51.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-ti8168evm.c TI816X: Update to use init_early 2011-02-16 08:45:46 -08:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-display.c OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 2011-01-10 10:54:20 +02:00
board-zoom-peripherals.c Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-14 13:13:07 -08:00
board-zoom.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
clkt2xxx_apll.c OMAP2xxx: clock: add clockfw autoidle support for APLLs 2011-03-07 20:02:13 -07:00
clkt2xxx_dpll.c OMAP2: clock: add DPLL autoidle support 2011-03-07 20:02:05 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control 2011-03-07 20:02:21 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt_iclk.c OMAP2430/3xxx: clock: add modem clock autoidle support 2011-03-07 20:03:12 -07:00
clock.c OMAP3/4: DPLL: Add allow_idle/deny_idle support for all DPLL's 2011-02-25 16:10:16 -07:00
clock.h OMAP2430/3xxx: clock: add modem clock autoidle support 2011-03-07 20:03:12 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
clock3xxx.c OMAP2+: clock: disable autoidle on all clocks during clock init 2011-02-25 16:10:42 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3xxx_data.c OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock34xx.c OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock34xx.h OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP2+: clock: disable autoidle on all clocks during clock init 2011-02-25 16:10:42 -07:00
clock2420_data.c OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain 2011-03-07 20:19:39 -07:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock2430_data.c OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain 2011-03-07 20:19:39 -07:00
clock3517.c OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clockdomain.c OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable 2011-02-25 16:06:48 -07:00
clockdomain.h OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable 2011-02-25 16:06:48 -07:00
clockdomain2xxx_3xxx.c OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable 2011-02-25 16:06:48 -07:00
clockdomain44xx.c OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable 2011-02-25 16:06:48 -07:00
clockdomains2xxx_3xxx_data.c OMAP: clockdomain: Arch specific funcs to handle deps 2011-02-25 16:06:47 -07:00
clockdomains44xx_data.c OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdm 2011-02-25 16:06:47 -07:00
cm-regbits-24xx.h OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:02:57 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP2xxx: clock: add clockfw autoidle support for APLLs 2011-03-07 20:02:13 -07:00
cm2xxx_3xxx.h OMAP2xxx: clock: add clockfw autoidle support for APLLs 2011-03-07 20:02:13 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cminst44xx.c OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cminst44xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
common.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
control.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
control.h TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
cpuidle34xx.c OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm 2011-02-25 16:06:48 -07:00
devices.c OMAP: devices: Modify McSPI device to adapt to hwmod framework 2011-02-17 09:53:31 -08:00
dma.c arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR 2011-01-27 16:25:35 -08:00
dpll3xxx.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
dpll44xx.c omap4: dpll: Enable auto gate control for all MX postdividers 2011-02-25 16:10:17 -07:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpio.c OMAP2+: GPIO: device registration 2010-12-07 16:26:57 -08:00
gpmc-nand.c OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds 2010-12-21 12:05:25 -08:00
gpmc-onenand.c OMAP2/3: OneNAND: add 104MHz support 2010-12-21 12:05:34 -08:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds 2010-12-21 12:05:25 -08:00
hsmmc.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
hsmmc.h Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
hwspinlock.c omap: add hwspinlock device 2011-02-17 09:52:43 -08:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
io.c OMAP: clockdomain: Arch specific funcs to handle deps 2011-02-25 16:06:47 -07:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
mailbox.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
mcbsp.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
mux.c arm: mach-omap2: mux: free allocated memory on error exit 2011-02-01 15:51:36 -08:00
mux.h omap2+: Add struct omap_board_data and use it for platform level serial init 2010-12-22 18:42:35 -08:00
mux34xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux44xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c ARM: CPU hotplug: remove bug checks in platform_cpu_die() 2010-12-20 15:09:10 +00:00
omap-iommu.c OMAP: iommu: make iva2 iommu selectable 2010-12-15 11:33:31 -06:00
omap-smp.c Merge branch 'misc' into devel 2011-01-06 22:32:52 +00:00
omap4-common.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod.c omap: hwmod: Populate _mpu_rt_va later on in omap_hwmod_late_init 2011-02-14 15:43:03 -08:00
omap_hwmod_3xxx_data.c OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC 2011-02-23 09:19:06 +02:00
omap_hwmod_44xx_data.c OMAP4: hwmod data: Prevent timer1 to be reset and idle during init 2011-02-22 10:34:41 -08:00
omap_hwmod_2420_data.c OMAP2420: hwmod data: add DSS DISPC RFBI VENC 2011-02-23 09:19:06 +02:00
omap_hwmod_2430_data.c OMAP2430: hwmod data: add DSS DISPC RFBI VENC 2011-02-23 09:19:06 +02:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_opp_data.h omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
omap_phy_internal.c usb: musb: AM35x: moving internal phy functions out of usb_musb.c file 2011-02-17 17:35:53 +02:00
omap_twl.c OMAP2+: TWL: include pm header for init protos 2011-01-07 13:33:07 -08:00
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
opp3xxx_data.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp4xxx_data.c omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm-debug.c OMAP: PM noop: implement context loss count for non-omap_devices 2010-12-21 21:31:55 -07:00
pm.c OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm 2011-02-25 16:06:48 -07:00
pm.h OMAP4: Register voltage PMIC parameters with the voltage layer 2010-12-22 14:31:45 -08:00
pm24xx.c OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c 2011-03-07 20:04:15 -07:00
pm34xx.c OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c 2011-03-07 20:04:15 -07:00
pm44xx.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2011-01-13 10:05:56 -08:00
pm_bus.c omap2+: pm_bus: make functions used as pointers as static 2011-01-07 13:33:08 -08:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomain.h OMAP: powerdomain: remove unused func declaration 2011-02-25 16:06:46 -07:00
powerdomain2xxx_3xxx.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
powerdomains3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c OMAP4: powerdomain: Remove L3INIT_PD OFF state 2010-12-21 22:37:28 -07:00
prcm-common.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prcm.c ARM: OMAP: Allow platforms to hook reset cleanly 2011-01-27 16:39:48 -08:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm2xxx_3xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg' 2011-01-07 13:33:10 -08:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
serial.c TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
smartreflex-class3.c OMAP3: PM: Adding smartreflex class3 driver 2010-12-22 14:31:40 -08:00
smartreflex.c OMAP: PM: SmartReflex: Fix possible null pointer read access 2011-01-31 12:59:15 -08:00
sr_device.c OMAP3+: sr_device: include pm header 2011-01-07 13:33:06 -08:00
sram34xx.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram242x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram243x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
timer-gp.c OMAP: counter_32k: init clocksource as part of machine timer init 2011-01-18 12:04:12 -07:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c arm: omap4: usb: add platform init code for EHCI 2010-12-01 02:42:13 +05:30
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-musb.c OMAP2+: musb: hwmod adaptation for musb registration 2011-02-17 18:34:00 +02:00
usb-tusb6010.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
voltage.c arm: mach-omap2: voltage: debugfs: fix memory leak 2011-01-31 12:59:14 -08:00
wd_timer.c omap2+: wdt: trivial sparse fixes 2011-01-06 19:58:28 -08:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00