David Brownell 82c54f864f [AVR32] ngw100 i2c-gpio tweaks ... Make the NGW100 bitbang i2c use open drain signaling. Also, speed it up, so it's closer to 100 kHz ... the code paths seem to be long enough that the udelay isn't dominating bit times. The peak bit rate I observed was around 125 kHz, but that's with large delays (usually before ACK/NAK) which hold the overall rate down to around 80 kHz (call it 100 usec/byte on average). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>		2007-10-11 13:32:55 +02:00
..
Makefile	[AVR32] Board code for ATNGW100	2007-04-27 13:44:15 +02:00
flash.c	[AVR32] SMC configuration in clock cycles	2007-10-11 13:32:49 +02:00
setup.c	[AVR32] ngw100 i2c-gpio tweaks	2007-10-11 13:32:55 +02:00